Non-dimensional analysis on blast wave propagation in foam concrete:Minimum thickness to avoid stress enhancement

Foam concrete is a prospective material in defense engineering to protect structures due to its high energy absorption capability resulted from the long plateau stage.However,stress enhancement rather than stress mitigation may happen when foam concrete is used as sacrificial claddings placed in the path of an incoming blast load.To investigate this interesting phenomenon,a one-dimensional difference model for blast wave propagation in foam concrete is firstly proposed and numerically solved by improving the second-order Godunov method.The difference model and numerical algorithm are validated against experimental results including both the stress mitigation and the stress enhancement.The difference model is then used to numerically analyze the blast wave propagation and deformation of material in which the effects of blast loads,stress-strain relation and length of foam concrete are considered.In particular,the concept of minimum thickness of foam concrete to avoid stress enhancement is proposed.Finally,non-dimensional analysis on the minimum thickness is conducted and an empirical formula is proposed by curve-fitting the numerical data,which can provide a reference for the application of foam concrete in defense engineering.

Errata regarding missing Ethical Statements in previously published articles:Part 2

Ethical statements were not included in the published version of the following articles that appeared in previous issues of Journal of Integrative Agriculture.The appropriate statements provided by the Authors are included below.

Errata regarding missing Ethical Statements in previously published articles:Part 5

Ethical statements were not included in the published version of the following articles that appeared in previous issues of Journal of Integrative Agriculture.The appropriate statements provided by the Authors are included below.

Errata regarding missing Ethical Statements in previously published articles:Part 3

Ethical statements were not included in the published version of the following articles that appeared in previous issues of Journal of Integrative Agriculture.The appropriate statements provided by the Authors are included below.

Errata regarding missing Ethical Statements in previously published articles:Part 1

Ethical statements were not included in the published version of the following articles that appeared in previous issues of Journal of Integrative Agriculture.The appropriate statements provided by the Authors are included below.

Errata regarding missing Ethical Statements in previously published articles:Part 4

Ethical statements were not included in the published version of the following articles that appeared in previous issues of Journal of Integrative Agriculture.The appropriate statements provided by the Authors are included below.

A Practical Approach for Missing Wireless Sensor Networks Data Recovery

In wireless sensor networks(WSNs),the performance of related applications is highly dependent on the quality of data collected.Unfortunately,missing data is almost inevitable in the process of data acquisition and transmission.Existing methods often rely on prior information such as low-rank characteristics or spatiotemporal correlation when recovering missing WSNs data.However,in realistic application scenarios,it is very difficult to obtain these prior information from incomplete data sets.Therefore,we aim to recover the missing WSNs data effectively while getting rid of the perplexity of prior information.By designing the corresponding measurement matrix that can capture the position of missing data and sparse representation matrix,a compressive sensing(CS)based missing data recovery model is established.Then,we design a comparison standard to select the best sparse representation basis and introduce average cross-correlation to examine the rationality of the established model.Furthermore,an improved fast matching pursuit algorithm is proposed to solve the model.Simulation results show that the proposed method can effectively recover the missing WSNs data.

Optimal Estimation of High-Dimensional Covariance Matrices with Missing and Noisy Data

The estimation of covariance matrices is very important in many fields, such as statistics. In real applications, data are frequently influenced by high dimensions and noise. However, most relevant studies are based on complete data. This paper studies the optimal estimation of high-dimensional covariance matrices based on missing and noisy sample under the norm. First, the model with sub-Gaussian additive noise is presented. The generalized sample covariance is then modified to define a hard thresholding estimator , and the minimax upper bound is derived. After that, the minimax lower bound is derived, and it is concluded that the estimator presented in this article is rate-optimal. Finally, numerical simulation analysis is performed. The result shows that for missing samples with sub-Gaussian noise, if the true covariance matrix is sparse, the hard thresholding estimator outperforms the traditional estimate method.

Missing Value Imputation for Radar-Derived Time-Series Tracks of Aerial Targets Based on Improved Self-Attention-Based Network

The frequent missing values in radar-derived time-series tracks of aerial targets(RTT-AT)lead to significant challenges in subsequent data-driven tasks.However,the majority of imputation research focuses on random missing(RM)that differs significantly from common missing patterns of RTT-AT.The method for solving the RM may experience performance degradation or failure when applied to RTT-AT imputation.Conventional autoregressive deep learning methods are prone to error accumulation and long-term dependency loss.In this paper,a non-autoregressive imputation model that addresses the issue of missing value imputation for two common missing patterns in RTT-AT is proposed.Our model consists of two probabilistic sparse diagonal masking self-attention(PSDMSA)units and a weight fusion unit.It learns missing values by combining the representations outputted by the two units,aiming to minimize the difference between the missing values and their actual values.The PSDMSA units effectively capture temporal dependencies and attribute correlations between time steps,improving imputation quality.The weight fusion unit automatically updates the weights of the output representations from the two units to obtain a more accurate final representation.The experimental results indicate that,despite varying missing rates in the two missing patterns,our model consistently outperforms other methods in imputation performance and exhibits a low frequency of deviations in estimates for specific missing entries.Compared to the state-of-the-art autoregressive deep learning imputation model Bidirectional Recurrent Imputation for Time Series(BRITS),our proposed model reduces mean absolute error(MAE)by 31%~50%.Additionally,the model attains a training speed that is 4 to 8 times faster when compared to both BRITS and a standard Transformer model when trained on the same dataset.Finally,the findings from the ablation experiments demonstrate that the PSDMSA,the weight fusion unit,cascade network design,and imputation loss enhance imputation performance and confirm the efficacy of our design.

Cross Validation Based Model Averaging for Varying-Coefficient Models with Response Missing at Random

In this paper, a model averaging method is proposed for varying-coefficient models with response missing at random by establishing a weight selection criterion based on cross-validation. Under certain regularity conditions, it is proved that the proposed method is asymptotically optimal in the sense of achieving the minimum squared error.

Comparison of two statistical methods for handling missing values of quantitative data in Bayesian N-of-1 trials: a simulation study

Background:Missing data are frequently occurred in clinical studies.Due to the development of precision medicine,there is an increased interest in N-of-1 trial.Bayesian models are one of main statistical methods for analyzing the data of N-of-1 trials.This simulation study aimed to compare two statistical methods for handling missing values of quantitative data in Bayesian N-of-1 trials.Methods:The simulated data of N-of-1 trials with different coefficients of autocorrelation,effect sizes and missing ratios are obtained by SAS 9.1 system.The missing values are filled with mean filling and regression filling respectively in the condition of different coefficients of autocorrelation,effect sizes and missing ratios by SPSS 25.0 software.Bayesian models are built to estimate the posterior means by Winbugs 14 software.Results:When the missing ratio is relatively small,e.g.5%,missing values have relatively little effect on the results.Therapeutic effects may be underestimated when the coefficient of autocorrelation increases and no filling is used.However,it may be overestimated when mean or regression filling is used,and the results after mean filling are closer to the actual effect than regression filling.In the case of moderate missing ratio,the estimated effect after mean filling is closer to the actual effect compared to regression filling.When a large missing ratio(20%)occurs,data missing can lead to significantly underestimate the effect.In this case,the estimated effect after regression filling is closer to the actual effect compared to mean filling.Conclusion:Data missing can affect the estimated therapeutic effects using Bayesian models in N-of-1 trials.The present study suggests that mean filling can be used under situation of missing ratio≤10%.Otherwise,regression filling may be preferable.

Non-Dimensional Analysis of Thermal Effect on Skin Exposure to an Electromagnetic Beam

We consider the problem of inducing withdrawal reflex on a test subject by exposing the subject’s skin to an electromagnetic beam. Heat-sensitive nociceptors in the skin are activated wherever the temperature is above the activation temperature. Withdrawal reflex occurs when the activated volume reaches a threshold. We non-dimensionalize the problem to write the temperature as the product of a parameter-free function of non-dimensional variables and a function of beam parameters. This formulation allows studying beam parameters without knowing skin material parameters. We examine the effects of spot size, total power and distribution type of the electromagnetic beam on 3 quantities at reflex: 1) the time to reflex, 2) the maximum temperature increase, and 3) the total energy consumption. We find that the flat-top beam is the best, with the lowest energy consumption and the smallest maximum temperature increase. The Super-Gaussian beam is only slightly inferior to the flat-top. The Gaussian beam has by far the worst performance among these three.

Hydrodynamic Lubrication of Elastic Foil Gas Bearing Using Over Relaxation Iteration Method and Non-Dimensional Equation

The purpose is to accurately predict the performance of foil bearing and achieve accurate results in the design of foil bearing structure.A new type of foil bearing with surface microstructure is used as experimental material.First,the lubrication mechanism of elastic foil gas bearing is analyzed.Then,the numerical solution process of the static bearing capacity and friction torque is analyzed,including the discretization of the governing equation of rarefied gas pressure based on the non-dimensional modified Reynolds equation and the over relaxation iteration method,the grid planning within the calculation range,the static solution of boundary parameters and static solution of the numerical process.Finally,the solution program is analyzed.The experimental data in National Aeronautics and Space Administration(NASA)public literature are compared with the simulation results of this exploration,so as to judge the accuracy of the calculation process.The results show that under the same static load,the difference between the minimum film thickness calculated and the test results is not obvious;when the rotor speed of the bearing is 60000 r/min,the influence of the boundary slip effect increases with the increase of the micro groove depth on the flat foil surface;when the eccentricity or the micro groove depth of the bearing increases,the bearing capacity will be strengthened.When the eccentricity is 6µm and 14µm,the viscous friction torque of the new foil bearing increases significantly with the increase of the depth of the foil micro groove,but when the eccentricity is 22µm,the viscous friction torque does not change with the change of the depth of the foil micro groove.It shows that the bearing capacity and performance of foil bearing are improved.

Local Similarity Relationships of Non-Dimensional Wind and Temperature Gradient in the Tower-Layer Atmosphere over Beijing City

Micrometeorological data for wind and temperature from a 325 m high tower in Beijing City are analyzed by use of local similarity theory. Non-dimensional wind and temperature gradients, Phi(m) and Phi(h), are determined by three techniques called, respectively, eddy-correlation, mean profiles and inertia-subrange cospectra (ISC) method for a wide range of atmospheric stratification from unstable to stable conditions. Average dissipation rate Phi(e) of turbulent kinetic energy (TKE) is evaluated from u-spectrum, as a quantity required in the last technique. Ratio of the eddy transfer coefficients, alpha(= K-h / K-m), is calculated from Phi(m) and Phi(h) estimations. The results from various techniques are compared with each other and with some available empirical results in the tower-layer, It is shown that the empirical relationships determined by mean profiles and ISC methods in the lower-layer turbulence ore in agreement with each other and with some other results.

NON-DIMENSIONAL DESIGN PARAMETERS FOR FOD TOLERANT FAN BLADES

Non-dimensional design concept for FOD tolerant fan blades is introduced based on the analyses of simplified impact models. The fan blades arc idealized as either beams or plates of elastic or rigid-plastic materials. The case of constant force impact as well as that of mass impact is analyzed. The centrifugal force effects are also considered in the beam models. The critical fracture conditions arc shown in simple npn-dimensional formulae or diagrams for each case.

Efficient and robust missing key tag identification for large-scale RFID systems

Radio Frequency Identification(RFID)technology has been widely used to identify missing items.In many applications,rapidly pinpointing key tags that are attached to favorable or valuable items is critical.To realize this goal,interference from ordinary tags should be avoided,while key tags should be efficiently verified.Despite many previous studies,how to rapidly and dynamically filter out ordinary tags when the ratio of ordinary tags changes has not been addressed.Moreover,how to efficiently verify missing key tags in groups rather than one by one has not been explored,especially with varying missing rates.In this paper,we propose an Efficient and Robust missing Key tag Identification(ERKI)protocol that consists of a filtering mechanism and a verification mechanism.Specifically,the filtering mechanism adopts the Bloom filter to quickly filter out ordinary tags and uses the labeling vector to optimize the Bloom filter's performance when the key tag ratio is high.Furthermore,the verification mechanism can dynamically verify key tags according to the missing rates,in which an appropriate number of key tags is mapped to a slot and verified at once.Moreover,we theoretically analyze the parameters of the ERKI protocol to minimize its execution time.Extensive numerical results show that ERKI can accelerate the execution time by more than 2.14compared with state-of-the-art solutions.

Ultra-High Dimensional Feature Selection and Mean Estimation under Missing at Random

Next Generation Sequencing (NGS) provides an effective basis for estimating the survival time of cancer patients, but it also poses the problem of high data dimensionality, in addition to the fact that some patients drop out of the study, making the data missing, so a method for estimating the mean of the response variable with missing values for the ultra-high dimensional datasets is needed. In this paper, we propose a two-stage ultra-high dimensional variable screening method, RF-SIS, based on random forest regression, which effectively solves the problem of estimating missing values due to excessive data dimension. After the dimension reduction process by applying RF-SIS, mean interpolation is executed on the missing responses. The results of the simulated data show that compared with the estimation method of directly deleting missing observations, the estimation results of RF-SIS-MI have significant advantages in terms of the proportion of intervals covered, the average length of intervals, and the average absolute deviation.

Missing Value Imputation Model Based on Adversarial Autoencoder Using Spatiotemporal Feature Extraction

Recently,the importance of data analysis has increased significantly due to the rapid data increase.In particular,vehicle communication data,considered a significant challenge in Intelligent Transportation Systems(ITS),has spatiotemporal characteristics and many missing values.High missing values in data lead to the decreased predictive performance of models.Existing missing value imputation models ignore the topology of transportation net-works due to the structural connection of road networks,although physical distances are close in spatiotemporal image data.Additionally,the learning process of missing value imputation models requires complete data,but there are limitations in securing complete vehicle communication data.This study proposes a missing value imputation model based on adversarial autoencoder using spatiotemporal feature extraction to address these issues.The proposed method replaces missing values by reflecting spatiotemporal characteristics of transportation data using temporal convolution and spatial convolution.Experimental results show that the proposed model has the lowest error rate of 5.92%,demonstrating excellent predictive accuracy.Through this,it is possible to solve the data sparsity problem and improve traffic safety by showing superior predictive performance.

Missed Opportunities for Diagnosing Bacilliferous Pulmonary Tuberculosis by Optical Microscopy versus GeneXpert MTB/RIF in Endemic Areas

Objective: To assess the missed opportunities from the diagnosis of bacilliferous pulmonary tuberculosis by optical microscopy compared to GeneXpert MTB/RIF between 2015 and 2019. Methods: This is a retrospective analysis of the diagnostic results of bacilliferous pulmonary tuberculosis in patients suspected of pulmonary tuberculosis at their first episode during the period. GeneXpert MTB/RIF (GeneXpert) and optical microscopy (OM) after Ziehl-Neelsen stained smear were performed on each patient’s sputum or gastric tubing fluid sample. Results: Among 341 patients suspected of pulmonary tuberculosis, 229 patients were declared bacilliferous tuberculosis by the two tests (67%), 220 patients by GeneXpert and 95 patients by OM, i.e. 64.5% versus 28% (p i.e. 58.5% of the positive cases detected by the two tests (134/229 patients) and 39.3% of the patients suspected of tuberculosis (134/341 patients). On the other hand, among 95 patients declared positive by OM, the GeneXpert ignored 9 (9.5%), i.e. 4% of all the positive cases detected by the two diagnostic tests (9/229 patients) and 3% of the patients suspected of tuberculosis (9/341 patients). The differences observed between the results of the two tests were statistically significant at the 5% threshold (p Conclusion: This study reveals missed diagnostic opportunities for bacilliferous pulmonary mycobacteriosis, statistically significant with optical microscopy than GeneXpert. The GeneXpert/optical microscopy couple could be a good contribution to the strategies for the elimination of pulmonary tuberculosis in sub-Saharan Africa.

Smoothed Empirical Likelihood Inference for Nonlinear Quantile Regression Models with Missing Response

In this paper, three smoothed empirical log-likelihood ratio functions for the parameters of nonlinear models with missing response are suggested. Under some regular conditions, the corresponding Wilks phenomena are obtained and the confidence regions for the parameter can be constructed easily.