Efficient Electromagnetic Wave Absorption and Thermal Infrared Stealth in PVTMS@MWCNT Nano‑Aerogel via Abundant Nano‑Sized Cavities and Attenuation Interfaces

Pre-polymerized vinyl trimethoxy silane(PVTMS)@MWCNT nano-aerogel system was constructed via radical polymerization,sol-gel transition and supercritical CO_(2)drying.The fabricated organic-inorganic hybrid PVTMS@MWCNT aerogel structure shows nano-pore size(30-40 nm),high specific surface area(559 m^(2)g^(−1)),high void fraction(91.7%)and enhanced mechanical property:(1)the nano-pore size is beneficial for efficiently blocking thermal conduction and thermal convection via Knudsen effect(beneficial for infrared(IR)stealth);(2)the heterogeneous interface was beneficial for IR reflection(beneficial for IR stealth)and MWCNT polarization loss(beneficial for electromagnetic wave(EMW)attenuation);(3)the high void fraction was beneficial for enhancing thermal insulation(beneficial for IR stealth)and EMW impedance match(beneficial for EMW attenuation).Guided by the above theoretical design strategy,PVTMS@MWCNT nano-aerogel shows superior EMW absorption property(cover all Ku-band)and thermal IR stealth property(ΔT reached 60.7℃).Followed by a facial combination of the above nano-aerogel with graphene film of high electrical conductivity,an extremely high electromagnetic interference shielding material(66.5 dB,2.06 mm thickness)with superior absorption performance of an average absorption-to-reflection(A/R)coefficient ratio of 25.4 and a low reflection bandwidth of 4.1 GHz(A/R ratio more than 10)was experimentally obtained in this work.

In situ infrared, Raman and X-ray spectroscopy for the mechanistic understanding of hydrogen evolution reaction

Hydrogen production by water reduction reactions has received considerable attention because hydrogen is considered a clean-energy carrier,key for a sustainable energy future.Computational methods have been widely used to study the reaction mechanism of the hydrogen evolution reaction(HER),but the calculation results need to be supported by experimental results and direct evidence to confirm the mechanistic insights.In this review,we discuss the fundamental principles of the in situ spectroscopic strategy and a theoretical model for a mechanistic understanding of the HER.In addition,we investigate recent studies by in situ Fourier transform infrared(FTIR),Raman spectroscopy,and X-ray absorption spectroscopy(XAS) and cover new findings that occur at the catalyst-electrolyte interface during HER.These spectroscopic strategies provide practical ways to elucidate catalyst phase,reaction intermediate,catalyst-electrolyte interface,intermediate binding energy,metal valency state,and coordination environment during HER.

Ni Flower/MXene-Melamine Foam Derived 3D Magnetic/Conductive Networks for Ultra-Efficient Microwave Absorption and Infrared Stealth

The development of multifunctional and efficient electromagnetic wave absorbing materials is a challenging research hotspot.Here,the magnetized Ni flower/MXene hybrids are successfully assembled on the surface of melamine foam(MF)through electrostatic self-assembly and dip-coating adsorption process,realizing the integration of microwave absorption,infrared stealth,and flame retardant.Remarkably,the Ni/MXene-MF achieves a minimum reflection loss(RLmin)of−62.7 dB with a corresponding effective absorption bandwidth(EAB)of 6.24 GHz at 2 mm and an EAB of 6.88 GHz at 1.8 mm.Strong electromagnetic wave absorption is attributed to the three-dimensional magnetic/conductive networks,which provided excellent impedance matching,dielectric loss,magnetic loss,interface polarization,and multiple attenuations.In addition,the Ni/MXene-MF endows low density,excellent heat insulation,infrared stealth,and flame-retardant functions.This work provided a new development strategy for the design of multifunctional and efficient electromagnetic wave absorbing materials.

Crystal microstructure, infrared absorption, and microwave electromagnetic properties of (La_(1-x)Dy_x)_(2/3)Sr_(1/3)MnO_3

The manganite perovskite polycrystal samples of （La1-xDyx）2/3Sr1/3MnO3 （x = 0, 0.1, 0.2, 0.35, and 0.5） doped with Dy were prepared by solid state reaction in atmosphere to measure their X-ray diffraction （XRD） patterns, scanning electric microscope （SEM） images, infrared absorption spectra, and microwave electromagnetic properties. The displacement of the XRD peaks of the samples was found, and the 2θ increases from 0.05o to 0.5o. The grains of undoped La2/3Sr1/3MnO3 not only have the greatest size, but also the most regular shape. The size of the grains decreases as the Dy doping content increases from 0 to 0.5. The infrared absorption spectra of all samples were measured at room temperature. An absorption peak corresponding to the stretching vibration mode of Mn-O bonds appears within the range of 591-629 cm-1. The absorption peak shifts from a higher frequency to a lower one with the decrease of the average ionic radius of A-site. The frequency de- pendence of microwave-absorbing properties, imaginary components of the complex magnetic permeability μ＂ and dielectric permeability ε＂ for all samples was measured at room temperature from 8 to 13 GHz. The results show that the loss of microwave absorption can be attrib- uted to both the magnetic and electric losses. The increase of Dy content not only enhances the microwave absorption but also causes the displacement of the absorption peaks.

Cross-interference correction and simultaneous multi-gas analysis based on infrared absorption

In this paper, we present simultaneous multiple pollutant gases （CO2, CO, and NO） measurements by using the non-dispersive infrared （NDIR） technique. A cross-correlation correction method is proposed and used to correct the cross-interferences among the target gases. The calculation of calibration curves is based on least-square fittings with third-order polynomials, and the interference functions are approximated by linear curves. The pure absorbance of each gas is obtained by solving three simultaneous equations using the fitted interference functions. Through the interference correction, the signal created at each filter channel only depends on the absorption of the intended gas. Gas mixture samples with different concentrations of CO2, CO, and NO are pumped into the sample cell for analysis. The results show that the measurement error of each gas is less than 4.5%.

Deposition of hexagonal boron nitride thin films on silver nanoparticle substrates and surface enhanced infrared absorption

Silver nanoparticle thin films with different average particle diameters are grown on silicon substrates. Boron nitride thin films are then deposited on the silver nanoparticle interlayers by radio frequency （RF） magnetron sputtering. The boron nitride thin films are characterized by Fourier transform infrared spectra. The average particle diameters of silver nanoparticle thin films are 126.6, 78.4, and 178.8 nm. The results show that the sizes of the silver nanoparticles have effects on the intensities of infrared spectra of boron nitride thin films. An enhanced infrared absorption is detected for boron nitride thin film grown on silver nanoparticle thin film. This result is helpful to study the growth mechanism of boron nitride thin film.

Novel infrared differential optical absorption spectroscopy remote sensing system to measure carbon dioxide emission

A CO_2 infrared remote sensing system based on the algorithm of weighting function modified differential optical absorption spectroscopy(WFM-DOAS) is developed for measuring CO_2 emissions from pollution sources. The system is composed of a spectrometer with band from 900 nm to 1700 nm, a telescope with a field of view of 1.12?, a silica optical fiber, an automatic position adjuster, and the data acquisition and processing module. The performance is discussed,including the electronic noise of the charge-coupled device(CCD), the spectral shift, and detection limits. The resolution of the spectrometer is 0.4 nm, the detection limit is 8.5 × 10^(20)molecules·cm^(-2), and the relative retrieval error is < 1.5%.On May 26, 2018, a field experiment was performed to measure CO_2 emissions from the Feng-tai power plant, and a twodimensional distribution of CO_2 from the plume was obtained. The retrieved differential slant column densities(dSCDs)of CO_2 are around 2 × 10^(21) molecules·cm^(-2) in the unpolluted areas, 5.5 × 10^(21)molecules·cm^(-2) in the plume locations most strongly affected by local CO_2 emissions, and the fitting error is less than 2 × 10^(20)molecules·cm^(-2), which proves that the infrared remote sensing system has the characteristics of fast response and high precision, suitable for measuring CO_2 emission from the sources.

Optical Absorption of the Nanostructured SiO_(2) in Ultraviolet-Near Infrared Light Range

The electronic struc ture of nanostructured SiO_(2) was studied by means of ultraviolet-near infrared,absorption spectra.A strong and broad absorption band was observed in the wavelength range of ultraviolet-near infrared light.This band is caused by the electronic transition from the valence band to the defect energy level in the bandgap which was theoretically calculated by using molecular orbital approach.With increasing the annealing temperature,the red shift of this band was observed.The mechanism of this band is discussed.

Improved Visible Transparency of SiO_2/ZnO:Al/CeO_2-TiO_2/SiO_2 Multilayer Films with High UV Absorption and Infrared Reflection Rate

New visible transparent, UV absorption, and high infrared reflection properties have been realized by depositing multilayer Si O2/Zn O: Al/Ce O2-Ti O2/Si O2 films onto glass substrates at low temperature by radio frequency magnetron sputtering. Optimum thickness of Si O2, Zn O: Al(ZAO) and Ce O2-Ti O2(CTO) films were designed with the aid of thin film design software. The degree of antireflection can be controlled by adjusting the thickness and refractive index. The outer Si O2 film can diminish the interference coloring and increase the transparency; the inner Si O2 film improves the adhesion of the coating on the glass substrate and prevents Ca2+, Na+ in the glass substrate from entering the ZAO film. The average transmittance in the visible light range increases by nearly 18%-20%, as compared to double layer ZAO/CTO films. And the films display high infrared reflection rate of above 75% in the wavelength range of 10-25 μm and good UV absorption(> 98%) properties. These systems are easy to produce on a large scale at low cost and exhibit high mechanical and chemical durability. The triple functional films with high UV absorption, antireflective and high infrared reflection rate will adapt to application in flat panel display and architectural coating glass, automotive glass, with diminishing light pollution as well as decreasing eye fatigue and increasing comfort.

MODIFICATION OF ABSORPTION SPECTRUM OF GaAs/AlGaAs QUANTUM WELL INFRARED PHOTODETECTOR BY POSTGROWTH ADJUSTMENT

Quantum well intermixing techniques modify the geometric shape of quantum wells to allow postgrowth adjustments.The tuning effect on the optical response property of a GaAs/AlGaAs quantum well infrared photodetector(QWIP) induced by the interdifussion of Al atoms was studied theoretically.By assuming an improvement of the heterointerface quality and an enhanced Al interdiffusion caused by postgrowth intermixings,the photoluminescence spectrum shows a blue-shifted,narrower and enhanced photoluminescence peak.The infrared optical absorption spectrum also shows the expected redshift of the response wavelength.However,the variation in the absorption peak intensity depends on the boundary conditions of the photo generated carriers.For high-quality QWIP samples,the mean free path of photocarriers is long so that the photocarriers are largely coherent when they transport across quantum wells.In this case,the enhanced Al interdiffusion can significantly degrade the infrared absorption property of the QWIP.Special effects are therefore needed to maintain and/or improve the optical properties of the QWIP device during postgrowth treatments.

Magnetism, Electronic Transport and Infrared Absorption Spectra in Perovskite Manganite La_(0.67-x)Dy_xCa_(0.33)MnO_3 (x=0～0.6)

Polycrystalline samples La0.67-xDyxCa0.3MnO3 (x=0～0.6) were prepared by traditional solid-state reaction method. The magnetization and resistivity of the samples were measured by PPMS (Quantum Design). The infrared absorption spectra (temperature scope: 20～300 K, frequency: 400～4400 cm-1) were collected by WQF-410 Fourier Transform Spectrophotometer. The substitution of Dy on La sites results in a decrease of the Curie temperature Tc and the magnetization, and also induces cluster-glass behaviors. The resistivity of the compounds is enhanced by Dy doped. Infrared absorption spectra provide the evidence of the variety of Mn-O-Mn bond length due to the Dy substitution and temperature changing. These results suggest that all of the magnetic coupling between Dy and Mn sublattice and La-Dy average ionic radius contribute to the magnetic and electronic character.

Residual compressive stress and intensity of infrared absorption of cubic BN films prepared by plasma enhanced chemical vapor deposition

Theoretical and experimental investigations on the dependence of the intensity of infrared （IR） absorption of poly- crystalline cubic boron nitride thin films under the residual compressive stress conditions have been performed. Our results indicate that the intensity of the IR absorption is proportional to the total degree of freedom of all the ions in the ordered regions. The reduction of interstitial Ar atom concentration, which causes the increase in the ordered regions of cubic boron nitride （cBN） crystallites, could be one cause for the increase in the intensity of IR absorption after residual compressive stress relaxation. Theoretical derivation is in good agreement with the experimental results concerning the IR absorption intensity and the Ar interstitial atom concentration in cubic boron nitride films measured by energy dispersion X-ray spec- troscopy. Our results also suggest that the interstitial Ar is the origin of residual compressive stress accumulation in plasma enhanced cBN film deposition.

DETERMINATION OF TOTAL EL2 AND NET ACCEPTOR CONCENTRATION IN UNDOPED SI GaAs BY MULTI-WAVELENGTH INFRARED ABSORPTION METHOD

Total EL2 concentration distribution and net acceptor concentration distribution in uncloped semi-insulating(SI) LEC GaAs have been measured by multi-wavelength infrared absorption method. The experimental results indicate that total EL2 concentration radial distribution is W-shaped and net acceptor concentration radial distribution is sample-dependent, it can present a n shape, a A shape, or a W shape corresponding to different samples.

Investigation of a Hot Filament Diamond Deposition by in situ Infrared Absorption

In situ infrared absorption spectroscopy has been measured for a hot filament diamondgrowth process.Absorption of CH4 and C2H2 species at 3050cm-1and 730cm-1were detectedrespectively.The absorption intensity of CH4 decreases while that of C2H2 increases as fila-ment temperature is raised.The correlation between infrared absorption intensity and dia-mond growth rate or diamond film quality was found.High C2H2 or low CH4 concentration inthe reaction region leads to high quality diamond film growth and high growth rate.

Infrared Absorption Spectra of Serpentine Cat's Eye from Sichuan Province of China

Infrared （IR） absorption spectra and X-ray powder diffraction （XRD） patterrns of sexpenfine cat＇s eye from Sichuan Province have been investigated, and infrared absorption bands of the serpentine have been assigned in this paper. The results indicate that the bands near 3 600 - 3 700 cm^-1 belong to the stretching absorption band VOH, the bands in 948 - 1 100 cm^-1 axe assigned to the stretching vibraling band Usvo, and the bands at 600 570 and 440 cm^-1 respectively belong to the bending vibration band VOH, δMg-O and δSi-O. The serpentine cat＇ s eye includes two types： chrysotile and antigorite. Chrysotile has a sharp and intensive band at 3 688 cm^-1 and a weak band at 3 643 cm^-1 , while antigorite has only one intensive band in the region. At vibration band VSi-O, chrysotile and antigorite have a similar feature at 1 071 cm^-1, but the band at 980 cm^-1 in anfigorite has been split into two bands in chrysotile - a strong one at 1 027 cm^-1 and a weak one at 949 cm^-1. In addition, antigorite has a characteristic bending vibrating band δMg-O at 570 cm^-1. Based on the analysis of the feature of crystal structure, their IR differences axe well explained.

Laser-induced fabrication of highly branched CuS nanocrystals with excellent near-infrared absorption properties

We report on the successful fabrication of highly branched Cu S nanocrystals by laser-induced photochemical reaction.Surprisingly, the single-crystalline nature with preferential alignment of the（107） orientation can be well improved during the moderate growth process. The branch length drastically increases from about 5 nm to 6 μm with an increase of photochemical reaction time（0-40 min）. The absorption spectra of as-prepared Cu S nanodendrites show that localized surface plasmon resonance（LSPR） peaks can be modulated from about 1037 nm to 1700 nm with an increase of branch length. Our results have a promising potential for photodynamic therapy and biological imaging application.

Analytical Research on Rotation-Vibration Multiphoton Absorption of Diatomic Molecules in Infrared Laser Fields

The multiphoton rotation-vibration energy absorption of diatomic molecules in infrared laser fields is analytically studied using the algebraic approach.The analytical expression of the rotation-vibration transition probability is given.The long-time average absorbed energy spectra and the average number of photons absorbed by the molecule are discussed.The results show that both molecular orientation and molecular anharmonicity are important factors in the rotation-vibration multiphoton absorption.

Tuning infrared absorption in hyperbolic polaritons coated silk fibril composite

Advanced textiles for thermal management give rise to many functional applications and unveil a new frontier for the study of human thermal comfort.Manipulating the coated quasi-particles between the composite components offers a platform to study the advanced thermoregulatory textiles.Here,we propose that coating the hyperbolic polariton can be an effective tool to tune infrared absorption in hexagonal boron nitride-coated silk composite.Remarkably,we achieve significant tuning of the infrared absorption efficiency of silk fibrils through the designed hexagonal boron nitride film.The underlying mechanism is related to resonance coupling between hyperbolic phonon polaritons.We find a notably high infrared absorption efficiency,nearly 3 orders larger than that without hBN coating,which can be achieved in our composite system.Our results indicate the promising future of advanced polariton-coated textiles and open a pathway to guide the artificial-intelligence design of advanced functional textiles.

Calculation of the Infrared Absorption for MX Compounds

In the theory calculation of lattice vibration, one acoustic and three optical branches were found to compose the phonon vibrating spectrum.Some isolated modes with frequencies lying outside the continuum branches will arise under the defect states.These local model results in the sharp peaks in the infrared absorption and Raman spectra.From calculation of the infrared absorption,the local mode with the infrared activity is obtained in the infrared absorption spectrum of MX compounds.