Relationship between groundwater cadmium and vicinity resident urine cadmium levels in the non-ferrous metal smelting area,China

Cadmium(Cd)has received widespread attention owing to its persistent toxicity and non-degradability.Cd in the human body is mainly absorbed from the external environment and is usually assessed using urinary Cd.Hunan Province is the heartland of the Chinese non-ferrous mining area,where several serious Cd pollution events have occurred,including high levels of Cd in the urine of residents.However,the environmental factors influencing high urinary Cd levels(UCLs)in nearby residents remain unclear.Therefore,211 nearby residents’UCLs and the corresponding sociological characteristics from nine groundwater samples in this area were analyzed using statistical analysis models.Groundwater Cd concentration ranged from 0.02 to 1.15μg/L,aligning with class III of the national standard;the range of UCL of nearby residents was 0.37–36.60μg/L,exceeding the national guideline of 0–2.5μg/L.Groundwater Cd levels were positively correlated with the UCL(P<0.001,correlation coefficient 95%CI=9.68,R^(2)=0.06).In addition,sociological characteristics,such as smoking status and education level,also affect UCL.All results indicate that local governments should strengthen the prevention and abatement of groundwater Cd pollution.This study is the first to systematically evaluate the relationship between groundwater Cd and UCL using internal and external environmental exposure data.These findings provide essential bases for relevant departments to reduce Cd exposure in regions where the heavy metal industry is globally prevalent.

Hierarchical Ag-SiO_2@Fe_3O_4magnetic composites for elemental mercury removal from non-ferrous metal smelting flue gas

Hierarchical Ag-SiO_2@Fe_3O_4 magnetic composites were selected for elemental mercury(Hg^0) removal from non-ferrous metal smelting flue gas in this study. Results showed that the hierarchical Ag-SiO_2@Fe_3O_4 magnetic composites had favorable Hg^0 removal ability at low temperature. Moreover, the adsorption capacity of hierarchical magnetic composite is much larger than that of pure Fe_3O_4 and SiO_2@Fe_3O_4. The Hg^0 removal efficiency reached the highest value as approximately 92% under the reaction temperature of 150°C, while the removal efficiency sharply reduced in the absence of O_2. The characterization results indicated that Ag nanoparticles grew on the surface of SiO_2@Fe_3O_4 support. The large surface area of SiO_2 supplied efficient reaction room for Hg and Ag atoms. Ag–Hg amalgam is generated on the surface of the composites. In addition, this magnetic material could be easily separated from fly ashes when adopted for treating real flue gas, and the spent materials could be regenerated using a simple thermal-desorption method.

Preparation and Microstructural Analysis of Smelting Waste Non-ferrous Metal Slag Geopolymer

The geopolymer samples were prepared with smelting waste slag of non-ferrous metal as the raw material and water glass as the activator. The effect of modulus of water glass and water binder ratio on the compressive strength was studied. The results show that the strength of the geopolymer activated by water glass with modulus of 1.1 and water binder ratio of 0.28 can maintain an increasing trend in the 90 curing days. Through the analyses with XRD, SEM（EDS）, and FTIR, the main reaction products are found to be geopolymer gels, which bond the crystalline minerals to provide strength. The molecular chains of amorphous phase in slag become shorter after depolymerization-polycondensation.

Application and Development Trends of Spectral Analysis in Draft of Non-Ferrous Metal Standards in China

Spectral analysis was a method of identifying substances, determining their chemical composition and calculating their content based on their spectral characteristics. This paper mainly discussed the application of various spectroscopic techniques, mainly including atomic absorption spectrometry (AAS) inductively coupled plasma emission spectrometry (ICP-AES) X-ray fluorescence spectroscopy (XRF) atomic fluorescence spectroscopy (AFS) direct reading spectroscopy (OES) glow discharge emission spectroscopy (GD-OSE) laser-induced breakdown spectroscopy (LIBS), in the formulation of non-ferrous metal standards in China. The AAS method was the most widely used single-element microanalysis method among the non-ferrous metal standards. The ICP-AES method was good at significant advantages in the simultaneous detection of multiple elements. The XRF method was increasingly used in the determination of primary and secondary trace elements due to its simple sample preparation and high efficiency. The AFS was mostly detected by single-element trace analysis. OES GD-OES and LIBS were playing an increasingly important role in the new demand area for non-ferrous metals. This paper discussed matrix elimination, sample digestion, sample preparation, instrument categories and other aspects of some standards, and summarized the advantages of spectral analysis and traditional chemical analysis methods. The new methods of future spectroscopic technology had been illustrated in the process of developing non-ferrous metal standards.

Risk assessment of heavy metals in soils and vegetables around nonferrous metals mining and smelting sites,Baiyin,China

A field survey was conducted to investigate the metal and arsenic contamination in soils and vegetables on four villages （Shuichuan （SCH）, Beiwan （BWA）, Dongwan （DWA） and Wufe （WFE）） located along, Baiyin, China, and to evaluate the possible health risks to local population through foodchain. Results show that the most significantly contaminated soils occurred upstream at SCH where Cd, Cu and As concentrations exceeded maximum allowable concentrations for Chinese agricultural soil. Further downstream the degree of contamination semi-systematically decreased in concentrations of metal. Generally, the leafy vegetables were more heavily contaminated than non-leafy vegetables. Chinese cabbage is the most severely contaminated, the concentrations of Cd exceeded the maximum permit levels （0.05 mg/kg） by 4.5 times. Bio-accumulate factor also shows that an entry of Cd to food chain plants is the greatest potential. Furthermore, the estimated daily intake amounts of the considered toxic elements （Cd, Pb and Cu） from the vegetables grown at SCH and BWA and DWA have exceeded the recommended dietary allowance levels. Thus, the vegetables grown in three villages above, which affected by Baiyin mining and smelting have a health hazard for human consumption.

Effects of smelting parameters on the slag/metal separation behaviors of Hongge vanadium-bearing titanomagnetite metallized pellets obtained from the gas-based direct reduction process

Smelting separations of Hongge vanadium-bearing titanomagnetite metallized pellets（HVTMP）prepared by gas-based direct reduction were investigated,and the effects of smelting parameters on the slag/metal separation behaviors were analyzed.Relevant mechanisms were elucidated using X-ray diffraction analysis,FACTSAGE 7.0 calculations,and scanning electron microscopy observations.The results show that,when the smelting temperature,time,and C/O ratio are increased,the recoveries of V and Cr of HVTMP in pig iron are improved,the recovery of Fe initially increases and subsequently decreases,and the recovery of Ti O_2 in slag decreases.When the smelting Ca O/Si O_2 ratio is increased,the recoveries of Fe,V,and Cr in pig iron increase and the recovery of Ti O_2 in slag initially increases and subsequently decreases.The appropriate smelting separation parameters for HVTMP are as follows：smelting temperature of 1873 K;smelting time of 30–50 min;C/O ratio of 1.25;and Ca O/Si O_2 ratio of 0.50.With these optimized parameters（smelting time：30 min）,the recoveries of Fe,V,Cr,and Ti O_2 are 99.5%,91.24%,92.41%,and 94.86%,respectively.

Optimization of low-temperature alkaline smelting process of crushed metal enrichment originated from waste printed circuit boards

A novel low-temperature alkaline smelting process is proposed to convert and separate amphoteric metals in crushed metal enrichment originated from waste printed circuit boards. The central composite design was used to optimize the operating parameters,in which mass ratio of Na OH-to-CME, smelting temperature and smelting time were chosen as the variables, and the conversions of amphoteric metals tin, lead, aluminum and zinc were response parameters. Second-order polynomial models of high significance and3 D response surface plots were constructed to show the relationship between the responses and the variables. Optimum area of80%-85% Pb conversion and over 95% Sn conversion was obtained by the overlaid contours at mass ratio of Na OH-to-CME of4.5-5.0, smelting temperature of 653-723 K, smelting time of 90-120 min. The models were validated experimentally in the optimum area, and the results demonstrate that these models are reliable and accurate in predicting the smelting process.

Heavy Metal Distribution in Soils near the Almalyk Mining and Smelting Industrial Area,Uzbekistan

The present study demonstrates distribution and chemical forms of heavy metals in soils of the AImalyk mining and smelting industrial area along five transects. The study area is located in Almalyk, Uzbekistan, where the intensification of industrial enterprises negatively impacts the environment. The distribution of 17 heavy metals （Cu, Zn, Pb, Sc, V, Cr, Co, Ni, Ga, Rb, Sr, Y, Zr, Nb, Ba, Th, and U） were studied in 21 sampling locations （21×3=63 soil samples） along five radial transects with a total length of 60 km downwind deposition gradient. Soil samples were collected from the upper layer （0-10 cm） at 4-6 km intervals. As a result of X-ray fluorescence spectrometry analyses by using X -ray fluorescence spectroscopy （XRF, Philips Analytical Ink, USA ）, a significant decrease in heavy metal （Cu, Zn, Pb） deposition was found going from the source in a downwind direction. Soil samples taken from the first location （near the pollution sources） showed higher concentrations of Cu, Zn and Pb, and lower concentrations with increasing distance from the source. Obtained data showed different impact of pollution sources to heavy metal deposition and distribution in soils. The Almalyk mining and smelting complex is the major source of Pb, Zn and Cu enrichment in soils. Distribution of other trace elements does not exceed background content and suggests lithogenic background. This allowed us to divide these elements into two groups： （1） technogenic （Cu, Zn and Pb）; and （2） lithogenic （Sc, V, Cr, Co, Ni, Ga, Rb, Sr, Y, Zr, Nb, Ba, Th and U） origins.

Cross-Lingual Non-Ferrous Metals Related News Recognition Method Based on CNN with A Limited Bi-Lingual Dictionary

To acquire non-ferrous metals related news from different countries’internet,we proposed a cross-lingual non-ferrous metals related news recognition method based on CNN with a limited bilingual dictionary.Firstly,considering the lack of related language resources of non-ferrous metals,we use a limited bilingual dictionary and CCA to learn cross-lingual word vector and to represent news in different languages uniformly.Then,to improve the effect of recognition,we use a variant of the CNN to learn recognition features and construct the recognition model.The experimental results show that our proposed method acquires better results.

Optimizing Non-Ferrous Metal Value from MSWI Bottom Ashes

The bottom ashes resulted annually from the incineration of municipal solid waste in Europe contain about 400,000 tonnes of metallic aluminium and 200,000 tonnes of heavy non-ferrous metals, such as copper and zinc. Efficient recovery of this non-ferrous metal resource requires state-of-the-art separation technologies and a continuous feedback of laboratory analyses of the metal products and the depleted bottom ash to the operators of the bottom ash treatment plants. A methodology is presented for the optimization of the production of non-ferrous metal value from Municipal Solid Waste Incinerator bottom ash. Results for an incineration plant in the Netherlands show that efficient recycling can have a significant impact on value recovery as well as on non-ferrous metal recycling rates, producing up to 8% more revenue and 25% more metals from the ash.

Environmental Geochemistry of Heavy Metal Contaminants in Soil and Stream Sediment in Panzhihua Mining and Smelting Area,Southwestern China

Mining and smelting activities are the main causes for the in creasing pollution of heavy metals in soil, water body and stream sediment. An e nvironmental geochemical investigation was carried out in and around the Panzhih ua mining and smelting area to determine the extent of chemical contamination in soil and sediment. The main objective of this study was to investigate the envi ronmental geochemistry of Ti, V, Cr, Mn, Cu, Pb, Zn and As in soil and sediment and to assess the degree of pollution in the study area. The data of heavy metal concentrations reveal that soils and sediments in the area have been slightly c ontaminated. Geochemical maps of I\-\{geo\} of each heavy metal show that the co ntaminated sites are located in V-Ti-magnetite sloping and smelting, gangues d am. The pollution sources of the selected elements come mainly from dusts result ant from mining activities and other three-waste-effluents. The area needs to be monitored regularly for trace metal, especially heavy metal enrichment.

Extraction of metals from a zinc smelting slag using two-step procedure combining acid and ethylene diaminetetraacetic acid disodium

A two-step leaching method in combination of acid and ethylene diaminetetraacetic acid disodium (EDTA-Na2) was applied to extract metals such as Cd,Cu,Fe,Pb and Zn from a zinc smelting slag. The results show that the extraction rates of Cd,Cu,Fe and Zn in slag reach 88.3%,54.1%,69.6% and 54.7%,respectively,while the extraction rate of Pb is only 0.05% leached with 1.25 mol/L sulfuric acid under the conditions of the ratio of slag to liquid of 100 g/L,65 °C and 120 r/min for 2 h. However,Pb extraction rate from 1.25 mol/L sulfuric acid leached residue reaches as high as 66.5% by using 0.1 mol/L EDTA-Na2 solution. The results indicate that two-step sequential extraction procedure combining 1.25 mol/L sulfuric acid and 0.1 mol/L EDTA-Na2 solution can extensively extract Cd,Cu,Fe,Pb and Zn from zinc smelting slag.

Heavy Metal Distribution in Soils near the Almalyk Mining and Smelting Industrial Area,Uzbekistan

The present study demonstrates the distribution of heavy metals in soils of Almalyk mining and smelting industrial area along the 5 transects.The study area is located in Almalyk,Uzbekistan,where the intensification of industrial enterprises negatively impact on the environment.The distribution of 17 heavy metals (Cu,Zn,Pb,Sc,V,Cr,Co,Ni,Ga,Rb,Sr,Y,Zr,Nb, Ba,Th,and U)were studied in 21 sampling locations (21×3=63 soil samples)along the 5 radial transects with the total length of 60 km downwind

Suggestions on Refractories in Nonferrous Metal Smelting Furnaces/Kilns

This paper introduces the refractories used in various nonferrous metal smelting equipment in China and the existing problems, and puts forward suggestions on the material of refractories, application of new technologies and production management of refractories, etc.

Non-ferrous Metal Industry in Hunan Province

In the last ten years (1982～1991) 2.26 Mt of 10 kinds of nonferrous metals had been pro-duced in Hunan Province. Up to date the mining capacity achieves 6.52 Mt, ore-dressing capacity--7.25 Mt, smelt capacity--334 kt and the processing capacity--113 kt. In 1991 the output of10 kinds of nonferrous metals amounted to 292.8 kt. At present Hunan Province produces alloys,oxides and other compounds for copper, aluminium, lead, zinc, antimony and mercury. Species ofrare-earth metals and its alloys produced in Hunan Province amount to 160 and more. In this

A Brief Introduction to the Rare Earths Research Institute,General Research Institute for Non-Ferrous Metals

The Rare Earths Research Institute(the former Rare Earths Research Laboratory)under the GRINM,the first institute to conduct R&D for rare earths(RE)industry in China,was founded in 1958.The Institutewas mainly engaged in the research work of comprehensive utilization of the mine at Baiyun-ebo,the largest

A Brief Introduction to the Rare Earths Research Institute,General Research Institute for Non-Ferrous Metals

The Rare Earths Research Institute(the former Rare Earths Research Laboratory)under the GRINM,the first institute to conduct R&D for rare earths(RE)industry in China,was founded in 1958.The Institutewas mainly engaged in the research work of comprehensive utilization of the mine at Baiyun-ebo,the largestRE mine in the world,and the ion adsorption type RE mineral in southern China.The ore decomposition,

Series Statistics Data of Non-ferrous Metals of China──Ⅰ Surveying

ＳｅｒｉｅｓＳｔａｔｉｓｔｉｃｓＤａｔａｏｆＮｏｎ－ｆｅｒｒｏｕｓＭｅｔａｌｓｏｆＣｈｉｎａⅠ２ＡＳｕｒｖｅｙｉｎｇｏｆＴｈｅＣｈｉｎａＮａｔｉｏｎａｌＮｏｎ－ｆｅｒｒｏｕｓＭｅｔａｌｓＩｎｄｕｓｔｒｙＣｏｒｐｃｒａｔｉｏｎ（ＣＮＮＣ）Ｂｙｃｏｕｒｔ...