Cure Kinetics of DGEBA with Hyperbranched Poly(3-hydroxyphenyl) Phosphate as Curing Agent Studied by Non-isothermal DSC

The cure kinetics of diglycidyl ether of bisphenol A （DGEBA） with hyperbranched poly （3-hydroxyphenyl） phosphate（HHPP） as the curing agent was investigated by means of non-isothermal differential scanning calorimetry （DSC） at various heating rates. The results were compared with the corresponding results by using 1,3-dihydroxybenzene（DHB） as a model compound. The results show that HHPP can enhance the cure reaction of DGEBA, resulting in the decrease of the peak temperature of the curing curve as well as the decrease of the activation energy because of the flexible --P--O-- groups in the backbone of HHPP. However, both the activation energy of the cured polymer and the peak temperature of the curing curve are increased with DHB as a curing agent. The cure kinetics of the DGEBA/HHPP system was calculated by using the isoconversional method given by Malek. It was found that the two-parameter autocatalytic model（Sestak-Berggren equation） is the most adequate one to describe the cure kinetics of the studied System at various heating rates. The obtained non-isothermal DSC curves from the experimental data show the results being accordant with those theoretically calculated.

Estimation of Critical Temperature of Thermal Explosion for Trinitromethyl Explosives by Non-isothermal DSC

Two general expressions and their six derived formulae for estimating the critical temperature（Tb） of thermal explosion for energetic materials（EMs） were derived from the Semenov＇s thermal explosion theory and eight non-isothermal kinetic equations via reasonable hypothesis. We can easily obtain the values of the initial temperature（T0i） at which DSC curve deviates from the baseline of the non-isothermal DSC curve of EMs, the onset temperature（Tei）, the exothermic decomposition reaction kinetic parameters and the values of Too and Te0 from the equation Toiorei=Tooore0＋α1β1＋α2β2＋...＋αL-2βi^L-2, i=1, 2, …, L and then calculate the values of Tb by means of the six derived formulae. The results obtained with the six derived calculating methods for six trinitromethyl explosives： bis（2,2,2- trinitroethyl-N-nitro） ethylene diamine（BTNEDA）, 2,2,2-trinitroethyl-4,4,4-trinitrobutyrate（TNETB）, bis（2,2,2- trinitroethyl） formal（BNTF）, bis（2,2,2-trinitroethyl-nitramine）（BTNNA）, 2,2,2-trinitroethyl-2,2,2-trinitroethyl-N- nitroamino acetate（TNTNNA） and tetrakis [2,2,2-trinitroethyl] orthoester（TTNOE） agree well with each other.

ESTIMATION OF THE CRITICAL RATE OF TEMPERATURE INCREASE OF THERMAL EXPLOSION OF NITROCELLULOSE USING NON-ISOTHERMAL DSC

A method of estimating the critical rate of temperature increase of thermal explosion for the first orderautocatalytic decomposition reaction system using non-isothermal DSC is presented. Information is obtained on theincreasing rate of temperature in nitrocellulose containing 13.54% of nitrogen when the first order autocatalytic decomposition converts into thermal explosion.

Estimation of Critical Rate of Temperature Rise for Thermal Explosion of First Order Autocatalytic Decomposition Reaction Systems by Using Non-isothermal DSC

A method of estimating the critical rate of temperature rise for the thermal explosion of first order autocatalytic decomposition reaction systems by using non-isothermal DSC is presented. The information was obtained on the increasing rate of temperature for the first order autocatalytic decomposition of nitrocellulose containing 13.86% nitrogen converting into the thermal explosion.

Evolution of mechanical properties,localized corrosion resistance and microstructure of a high purity Al-Zn-Mg-Cu alloy during non-isothermal aging

The evolution of mechanical properties,localized corrosion resistance of a high purity Al-Zn-Mg-Cu alloy during non-isothermal aging(NIA)was investigated by hardness test,electrical conductivity test,tensile test,intergranular corrosion test,exfoliation corrosion test,slow strain rate tensile test and electrochemical test,and the mechanism has been discussed based on microstructure examination by optical microscopy,electron back scattered diffraction,scanning electron microscopy and scanning transmission electron microscopy.The NIA treatment includes a heating stage from 40℃to 180℃with a rate of 20℃/h and a cooling stage from 180℃to 40℃with a rate of 10℃/h.The results show that the hardness and strength increase rapidly during the heating stage of NIA since the increasing temperature favors the nucleation and the growth of strengthening precipitates and promotes the transformation of Guinier-Preston(GPI)zones toη'phase.During the cooling stage,the sizes ofη'phase increase with a little change in the number density,leading to a further slight increase of the hardness and strength.As NIA proceeds,the corroded morphology in the alloy changes from a layering feature to a wavy feature,the maximum corrosion depth decreases,and the reason has been analyzed based on the microstructural and microchemical feature of precipitates at grain boundaries and subgrain boundaries.

Exploring the effect of cooling rate on non-isothermal crystallization of copolymer polypropylene by fast scanning calorimetry

Polypropylene is commonly used as a binder for ceramic injection molding,and rapid cooling is often encountered during processing.However,the crystallization behavior of polypropylene shows a strong dependence on cooling rate due to its semi-crystalline characteristics.Therefore,the influence of cooling rate on the quality of final product cannot be ignored.In this study,the fast differential scanning calorimetry(FSC)test was performed to study the influence of cooling rate on the non-isothermal crystallization behavior and non-isothermal crystallization kinetics of a copolymer polypropylene(PP BC03B).The results show that the crystallization temperatures and crystallinity decrease as the cooling rate increases.In addition,two exothermic peaks occur when cooling rate ranges from 30 to 300 K·s^(-1),indicating the formation of another crystal phase.Avrami,Ozawa and Mo equations were used to explore the non-isothermal crystallization kinetics,and it can be concluded that the Mo method is suitable for this study.

基于YOLOv7-tiny改进的口罩佩戴检测算法YOLOv7-DSC

针对密集人群下口罩佩戴检测实时性差、难以部署到移动端的问题,提出基于YOLOv7-tiny改进的口罩佩戴检测算法YOLOv7-DSC。该算法结合深度可分离卷积改进的SE注意力机制设计了一种轻量化特征提取模块,并结合BiFPN设计了一种加权特征融合模块。经实验验证,YOLOv7-DSC算法在口罩数据集上mAP为96.9%,与YOLOv7-tiny算法相比仅降低了0.5%;相比于YOLOv3-tiny、YOLOv4-tiny、YOLOv5s、MobileNetV3、ShuffleNetV2、GhostNet和Swin-Transformer算法在mAP上分别高出13.4%、11.2%、4.5%、5.7%、5.8%、4.2%和5.1%;在检测精度与YOLOv7-tiny算法相当的情况下,参数量和计算量分别减少了60%和55%,仅为2.4 M和6.0 G,极大地降低了硬件成本。

A New Method Based on the Non-isothermal Kinetic Equation to Estimate the Critical Temperature of Thermal Explosion for Energetic Materials Using Non-isothermal DSC

A method for estimating the critical temperature of thermal explosion for energetic materials using differential scanning calorimetry (DSC) measurement is derived from the Semenov's thermal explosion theory and the non-isothermal kinetic equation based on Harcourt-Esson's kinetic equation.The result obtained from this method coincides completely with that of the Hu-Yang-Liang-Wu method.

Restraining effect of nitrogen on coal oxidation in different stages:Non-isothermal TG-DSC and EPR research

Nitrogen is widely used to prevent the spontaneous combustion of coal in underground coal mines. A spontaneous combustion-prone coal seam was studied to investigate the restraining effect of nitrogen on coal oxidation in different oxidation stages, based on non-isothermal thermogravimetry-differential scanning calorimetry(TG-DSC) and electron paramagnetic resonance(EPR) experiments. We found that the key feature temperatures grow steadily with increasing nitrogen in the oxidation environment,resulting in longer oxidation stages. The most significant finding is that there is a stagnation of the inhibitory effect of nitrogen on coal oxidation in the range of 85.0–95.0% nitrogen in the slow and the rapid oxidation stages, owing to the competitive adsorption of coal by nitrogen and oxygen. However, the restraining effect cannot be reflected by the kinetic parameters of the coal before it reaches the thermal decomposition and combustion stage. Nitrogen can also affect free radical types and free radical concentrations during coal oxidation: the higher the concentration of nitrogen in the oxidation environment, the greater the number of free radical types and the lower the free radical concentration. This experimental study improves the understanding of the restraining effect of nitrogen on coal oxidation in different oxidation stages and provides an important reference for coal fire prevention in spontaneous combustionprone coal seams.

Non-isothermal dehydration kinetic study of aspartame hemihydrate using DSC, TGA and DSC-FTIR microspectroscopy

Three thermal analytical techniques such as differential scanning calorimetry(DSC), thermal gravimetric analysis(TGA) using five heating rates, and DSC-Fourier Transform Infrared(DSCFTIR) microspectroscopy using one heating rate, were used to determine the thermal characteristics and the dehydration process of aspartame(APM) hemihydrate in the solid state.The intramolecular cyclization process of APM anhydrate was also examined. One exothermic and four endothermic peaks were observed in the DSC thermogram of APM hemihydrate,in which the exothermic peak was due to the crystallization of some amorphous APM caused by dehydration process from hemihydrate to anhydride. While four endothermic peaks were corresponded to the evaporation of absorbed water, the dehydration of hemihydrate, the diketopiperazines(DKP) formation via intramolecular cyclization, and the melting of DKP, respectively. The weight loss measured in TGA curve of APM hemihydrate was associated with these endothermic peaks in the DSC thermogram. According to the Flynn–Wall–Ozawa(FWO)model, the activation energy of dehydration process within 100–150 °C was about 218 ± 11 kJ/mol determined by TGA technique. Both the dehydration and DKP formation processes for solid-state APM hemihydrate were markedly evidenced from the thermal-responsive changes in several specific FTIR bands by a single-step DSC-FTIR microspectroscopy.

Three dimensional phase-field simulation for non-isothermal binary alloy solidification: Comparison with LKT theory

Using the advanced algorithm combining parallel computing,adaptive mesh re-griding and multigrid methods,quantitative 3D phase-field simulations of non-isothermal solidification of binary alloy were carried out.The 3D phase-field simulation results were compared with the analytical LKT(Lipton,Kurz and Trivedi)theory.For comparison,the simulation and analytical results for 2D cases were also given.The 3D phase-field simulation results support the transport portion of the LKT theory.However,the tip radius and tip velocity predicted by the simulations are not in good agreement with the LKT theory over the whole range of undercooling.The stability parameter calculated from phase-field simulations varies significantly with the Peclet number,indicating that the stability criterion,which assumes that the stability parameter is constant,is invalid.

Reaction behavior and non-isothermal kinetics of suspension magnetization roasting of limonite and siderite

In order to develop limonite and decrease CO_(2) emissions,siderite is proposed as a clean reductant for suspension magnetization roasting(SMR) of limonite.An iron concentrate(iron grade:65.92wt%,iron recovery:98.54wt%) was obtained by magnetic separation under the optimum SMR conditions:siderite dosage 40wt%,roasting temperature 700℃,roasting time 10 min.According to the magnetic analysis,SMR achieved the conversion of weak magnetic minerals to strong magnetic minerals,thus enabling the recovery of iron via magnetic separation.Based on the phase transformation analysis,during the SMR process,limonite was first dehydrated and converted to hematite,and then siderite decomposed to generate magnetite and CO,where CO reduced the freshly formed hematite to magnetite.The microstructure evolution analysis indicated that the magnetite particles were loose and porous with a destroyed structure,making them easier to be ground.The non-isothermal kinetic results show that the main reaction between limonite and siderite conformed to the two-dimension diffusion mechanism,suggesting that the diffusion of CO controlled the reaction.These results encourage the application of siderite as a reductant in SMR.

质量平衡法与DSC法测定正十六烷纯度

通过质量平衡法与DSC(差示扫描量热)法对正十六烷进行了纯度分析。质量平衡法中,采用气相色谱FID检测器面积归一化法测定正十六烷主成分及有机杂质,热重和卡尔费休法分析试剂无机组分和水分含量;DSC法通过测定试剂熔融吸热曲线,根据范特霍夫方程计算正十六烷纯度。质量平衡法测定正十六烷纯度为99.30%,不确定度为0.26%;DSC法测定正十六烷纯度为99.35%,不确定度为0.50%。两种正十六烷纯度测定方法一致性良好,其中质量平衡法考察因素较多,适用范围较广,不确定度较小;DSC法操作简单,试剂消耗较小,但其测量不确定度较高,需使用精确度较高的仪器。

DSC法升温速率对再生聚酯纤维鉴别的影响研究

由于固有特性,聚酯纤维PET在服装以及其他多种行业有着重要运用。为了提高资源利用率、实现绿色低碳化发展,已有多种方法用于PET再生合成。再生PET与原生PET有相同的分子结构,采用传统方法难以鉴别,而现有的标准方法过于复杂。考虑到再生PET与原生PET存在低聚物含量的差别,可以使用差示扫描量热仪(DSC)测试法鉴别是否为再生PET。文章重点研究了在DSC测试中,升温速率对于再生PET鉴别的影响。结果表明,在样品质量约为5 mg及氮气吹扫速率为50 mL/min的情况下,升温速率为10℃/min是最佳的测试条件,通过此方法可以鉴别PET是否为再生,为后续类似研究提供参考。

DSC法测定PET/PTT混纺产品中PTT纤维含量的不确定度评定

文中以差式扫描量热法(DSC)测定PTT(聚对苯二甲酸丙二醇酯)纤维含量为实验依据,分析实验过程中的不确定度来源并进行具体量化,得出差式扫描量热仪系统误差和热量求积是不确定度主要来源的结论。DSC法测定PTT纤维含量的相对扩展不确定度为3.58%(k=2)。根据笔者在实验室长期检测的经验,给出提高检测结果准确性的建议。

DSC单峰法分析有机结晶物质纯度的评述

对测定有机结晶物质纯度的DSC单峰法进行了评述,从原理层面阐述了DSC法测定时被测样品的基本条件,分析了动态DSC测定法和上述基本条件衔接中存在的问题及在实践中DSC测定法的可靠性,探讨了在数据处理过程中存在的问题。陈群-顾浩经验公式综合考虑了样品整体熔化过程中热效应重叠的熔融吸热峰面积的再分配问题,避免了传统方法对熔化早期阶段无法确认而进行面积补偿带来的结果不准确性,可用于快速、准确测定有机结晶物质的纯度。

Estimation of Critical Temperature of Thermal Explosion for Energetic Materials Based on Non-isothermal Kinetic Equation dα/dt =A_0 exp(bT)[1+(T–T_0 )b]f(α)

Critical temperature（Tb） of thermal explosion for energetic materials is estimated from Semenov＇s thermal explosion theory and the non-isothermal kinetic equation da/dt=Aoexp（bT）[1＋（T-T0）b][（a） deduced via reasonable hypotheses, where To is the initial point of the deviation from the baseline of DSC curve. The final formula is （Tb-Te0）{ 1＋1/[1＋（ Tb-T00）b]}=1. We can easily obtain the initial temperature（T0/） and onset temperature（Tci） from the non-isothermal DSC curves, the values of Too and Tc0 from the equation TOi or ei=T00 or c0＋α1βi＋a2βi^2＋…＋aL-2L-2βiL-2, i=1,2,…L, the value of b from the equation： In[β/（Tei-T0i）]=ln[A0/G（a）]＋bTei, so as to calculate the value of Tb. The result obtained with this method coincides completely with the value of Tb obtained by Hu-Yang-Liang-Wu method.

Non-isothermal kinetics of styrene-butadiene-styrene asphalt combustion

The combustion characteristics of styrene-butadiene-styrene （SBS） asphalt are studied by thermogravimetric analysis （TG/DTG） at four different heating rates. According to the saturates/aromatics/resins/asphaltenes （SARA） fractionation method, the combustion process of SBS asphalt can be divided by Gaussian peak fitting into three main stages： oil content release, resin pyrolysis, and asphaltene and char combustion. When the heating rate increases, the mass losses of the oil content and resin pyrolysis increase, and less asphaltenes are formed at a higher temperature. The activation energy values are calculated by the Coats-Redfern method to be in the range 61.6 kJ/mol-142.9 kJ/mol. The Popescu method is used for the kinetic analysis, and the result shows that the three stages of asphalt combustion can be explained by the sphere phase boundary reaction model, the second order chemical reaction model, nucleation, and its subsequent growth model, respectively.

KINETICS OF NON-ISOTHERMAL CRYSTALLIZATION

A kinetic equation of non-isothermal crystamzation was derived by extending Avrami's equation to the non-isothermal situation. More crystallization information can be obtained from this kinetic equation. The curves of non-isothermal and isothermal crystallizations were analysed and compared for poly (ethylene terephthalate) (PET), and the results were discussed.

GLOBAL EXISTENCE OF WEAK SOLUTIONS TO THE NON-ISOTHERMAL NEMATIC LIQUID CRYSTALS IN 2D

In this article, we prove the global existence of weak solutions to the non- isothermal nematic liquid crystal system on T2, on the basis of a new approximate system which is different from the classical Ginzburg-Landau approximation. Local in space energy inequalities are employed to recover the estimates on the second order spatial derivatives of the director fields locally in time, which cannot be derived from the basic energy balance. It is shown that these weak solutions satisfy the temperature equation, and also the total energy equation but away from at most finite many ＂singular＂ times, at which the energy concentration occurs and the director field losses its second order derivatives.