A kinetic equation of non-isothermal crystamzation was derived by extending Avrami's equation to the non-isothermal situation. More crystallization information can be obtained from this kinetic equation. The curve...A kinetic equation of non-isothermal crystamzation was derived by extending Avrami's equation to the non-isothermal situation. More crystallization information can be obtained from this kinetic equation. The curves of non-isothermal and isothermal crystallizations were analysed and compared for poly (ethylene terephthalate) (PET), and the results were discussed.展开更多
The non-isothermal crystallization kinetics of poly(ethylene terephthalate) (PET) modified by poly (ethlene glycol) (PEG) were determined by DSC. The dual linear regression method was used to evaluate the relationship...The non-isothermal crystallization kinetics of poly(ethylene terephthalate) (PET) modified by poly (ethlene glycol) (PEG) were determined by DSC. The dual linear regression method was used to evaluate the relationship between the reciprocal of t 1/2 ( the half life of crystallization) and the appropriate temperature variable. The parameters such as the activation energy (Ed) for transport, the equilibrium melting temperature (T_m^0),the nucleation parameter (ψ),themaximum crystallization temperature (T_(e, max)), and the kinetic crystallizability (G) for the copolyesters were obtained. The influence of the PEG content in PET chains on the parameters characterizing crystallization kinetics and crystallization thermodynamics was discussed.展开更多
The microstructure characteristics of AlSiCuMg cast alloys were studied withdifferent Cu content and the gradual solution treatment by DSC, SEM, TEM and mechanical method. Themelting point of alpha (Al) + Si decreases...The microstructure characteristics of AlSiCuMg cast alloys were studied withdifferent Cu content and the gradual solution treatment by DSC, SEM, TEM and mechanical method. Themelting point of alpha (Al) + Si decreases and polynary eutectic phases with low melting point formwith increase of Cu content. Gradual solution treatment includes two steps: solution treating nearthe melting point of polynary eutectic phase to take it dissolve first, and then increasing solutiontemperature to take the remainder copper intermetallics dissolved into alpha (Al). Grain boundariesmelting can be avoided by gradual solution treatment, even the maximum solution temperature isabove final solidification point, and the age hardening response increases correspondingly展开更多
A method for estimating the critical temperature of thermal explosion for energetic materials using differential scanning calorimetry (DSC) measurement is derived from the Semenov's thermal explosion theory and th...A method for estimating the critical temperature of thermal explosion for energetic materials using differential scanning calorimetry (DSC) measurement is derived from the Semenov's thermal explosion theory and the non-isothermal kinetic equation based on Harcourt-Esson's kinetic equation.The result obtained from this method coincides completely with that of the Hu-Yang-Liang-Wu method.展开更多
The thermal behaviour of aloe-emodin, chrysophanol and physcion and their kinetics have been investigated under non-isothermal conditions by means of differential thermal analysis （DTA） and thermogravimetry （TG）. ...The thermal behaviour of aloe-emodin, chrysophanol and physcion and their kinetics have been investigated under non-isothermal conditions by means of differential thermal analysis （DTA） and thermogravimetry （TG）. The thermal characteristics have been determined using the DTA and TG-DTG curves. The non-isothermal kinetic data were analyzed by means of the Achar method and the Madhusudanan-Krishnan-Ninan （MKN） method. The possible reaction mechanisms have been investigated by comparing the kinetic parameters. The kinetic equation for aloe-emodin, chrysophanol and physcion can be expressed as dα/dt=Aexp（-E/RT）1/3（1-α）[-In（1-α]2. The activation energy E （kJ mol^-1） of the three free anthraquinones are 78.09, 89.54, and 107.5 and their InA/s^-1 are 22.98, 36.85 and 43.60, respectively.展开更多
The precipitation behaviour during quenching of cast Al-7Si-0.3Mg aluminium alloy was investigated by DSC in the cooling rate range of 0.01 K/s to 3 K/s and by quenching dilatometry for higher rates. Two main precipit...The precipitation behaviour during quenching of cast Al-7Si-0.3Mg aluminium alloy was investigated by DSC in the cooling rate range of 0.01 K/s to 3 K/s and by quenching dilatometry for higher rates. Two main precipitation reactions were observed during cooling, a high temperature reaction starting almost directly with quenching from 540℃ and a low temperature reaction starting at about 400℃. Quenching with 3 K/s already significantly suppresses precipitation during quenching. Hardness after T6 ageing increases with increasing quenching rate, due to the increasing content of supersaturated solid solution. By dilatometry and hardness results the critical cooling rate can be estimated as about 60 K/s. Quenched Al-7Si-0.3Mg microstructures have been investigated by light microscopy. The microstructures consist of an aluminium-silicon eutectic structure, aluminium solid solution dendrites and precipitates inside the aluminium dendrites, depending on quenching rate.展开更多
文摘A kinetic equation of non-isothermal crystamzation was derived by extending Avrami's equation to the non-isothermal situation. More crystallization information can be obtained from this kinetic equation. The curves of non-isothermal and isothermal crystallizations were analysed and compared for poly (ethylene terephthalate) (PET), and the results were discussed.
文摘The non-isothermal crystallization kinetics of poly(ethylene terephthalate) (PET) modified by poly (ethlene glycol) (PEG) were determined by DSC. The dual linear regression method was used to evaluate the relationship between the reciprocal of t 1/2 ( the half life of crystallization) and the appropriate temperature variable. The parameters such as the activation energy (Ed) for transport, the equilibrium melting temperature (T_m^0),the nucleation parameter (ψ),themaximum crystallization temperature (T_(e, max)), and the kinetic crystallizability (G) for the copolyesters were obtained. The influence of the PEG content in PET chains on the parameters characterizing crystallization kinetics and crystallization thermodynamics was discussed.
基金This work is financially supported by the National Natural Science Foundation of China(No.50071028)the Shandong Natural Science Foundation of China (No.Z2001F02)
文摘The microstructure characteristics of AlSiCuMg cast alloys were studied withdifferent Cu content and the gradual solution treatment by DSC, SEM, TEM and mechanical method. Themelting point of alpha (Al) + Si decreases and polynary eutectic phases with low melting point formwith increase of Cu content. Gradual solution treatment includes two steps: solution treating nearthe melting point of polynary eutectic phase to take it dissolve first, and then increasing solutiontemperature to take the remainder copper intermetallics dissolved into alpha (Al). Grain boundariesmelting can be avoided by gradual solution treatment, even the maximum solution temperature isabove final solidification point, and the age hardening response increases correspondingly
基金the National Natural Science Foundation of China (60975036)
文摘A method for estimating the critical temperature of thermal explosion for energetic materials using differential scanning calorimetry (DSC) measurement is derived from the Semenov's thermal explosion theory and the non-isothermal kinetic equation based on Harcourt-Esson's kinetic equation.The result obtained from this method coincides completely with that of the Hu-Yang-Liang-Wu method.
文摘The thermal behaviour of aloe-emodin, chrysophanol and physcion and their kinetics have been investigated under non-isothermal conditions by means of differential thermal analysis （DTA） and thermogravimetry （TG）. The thermal characteristics have been determined using the DTA and TG-DTG curves. The non-isothermal kinetic data were analyzed by means of the Achar method and the Madhusudanan-Krishnan-Ninan （MKN） method. The possible reaction mechanisms have been investigated by comparing the kinetic parameters. The kinetic equation for aloe-emodin, chrysophanol and physcion can be expressed as dα/dt=Aexp（-E/RT）1/3（1-α）[-In（1-α]2. The activation energy E （kJ mol^-1） of the three free anthraquinones are 78.09, 89.54, and 107.5 and their InA/s^-1 are 22.98, 36.85 and 43.60, respectively.
文摘The precipitation behaviour during quenching of cast Al-7Si-0.3Mg aluminium alloy was investigated by DSC in the cooling rate range of 0.01 K/s to 3 K/s and by quenching dilatometry for higher rates. Two main precipitation reactions were observed during cooling, a high temperature reaction starting almost directly with quenching from 540℃ and a low temperature reaction starting at about 400℃. Quenching with 3 K/s already significantly suppresses precipitation during quenching. Hardness after T6 ageing increases with increasing quenching rate, due to the increasing content of supersaturated solid solution. By dilatometry and hardness results the critical cooling rate can be estimated as about 60 K/s. Quenched Al-7Si-0.3Mg microstructures have been investigated by light microscopy. The microstructures consist of an aluminium-silicon eutectic structure, aluminium solid solution dendrites and precipitates inside the aluminium dendrites, depending on quenching rate.
