3D Road Network Modeling and Road Structure Recognition in Internet of Vehicles

Internet of Vehicles (IoV) is a new system that enables individual vehicles to connect with nearby vehicles,people, transportation infrastructure, and networks, thereby realizing amore intelligent and efficient transportationsystem. The movement of vehicles and the three-dimensional (3D) nature of the road network cause the topologicalstructure of IoV to have the high space and time complexity.Network modeling and structure recognition for 3Droads can benefit the description of topological changes for IoV. This paper proposes a 3Dgeneral roadmodel basedon discrete points of roads obtained from GIS. First, the constraints imposed by 3D roads on moving vehicles areanalyzed. Then the effects of road curvature radius (Ra), longitudinal slope (Slo), and length (Len) on speed andacceleration are studied. Finally, a general 3D road network model based on road section features is established.This paper also presents intersection and road section recognition methods based on the structural features ofthe 3D road network model and the road features. Real GIS data from a specific region of Beijing is adopted tocreate the simulation scenario, and the simulation results validate the general 3D road network model and therecognitionmethod. Therefore, thiswork makes contributions to the field of intelligent transportation by providinga comprehensive approach tomodeling the 3Droad network and its topological changes in achieving efficient trafficflowand improved road safety.

Vehicle Head and Tail Recognition Algorithm for Lightweight DCDSNet

In the model of the vehicle recognition algorithm implemented by the convolutional neural network,the model needs to compute and store a lot of parameters.Too many parameters occupy a lot of computational resources making it difficult to run on computers with poor performance.Therefore,obtaining more efficient feature information of target image or video with better accuracy on computers with limited arithmetic power becomes the main goal of this research.In this paper,a lightweight densely connected,and deeply separable convolutional network(DCDSNet)algorithmis proposed to achieve this goal.Visual Geometry Group(VGG)model is improved by utilizing the convolution instead of the fully connected module,the deeply separable convolution module,and the densely connected network module,with the first two modules reducing the parameters and the third module allowing the algorithm to have more features in a limited number of parameters.The algorithm achieves better results in the mine vehicle recognition dataset.Experiments show that the recognition accuracy is improved by 4.41% compared to VGG19 and the amount of parameters is reduced by 71% compared to VGG19.

Adaptive Multi-Feature Fusion for Vehicle Micro-Motor Noise Recognition Considering Auditory Perception

The deployment of vehicle micro-motors has witnessed an expansion owing to the progression in electrification and intelligent technologies.However,some micro-motors may exhibit design deficiencies,component wear,assembly errors,and other imperfections that may arise during the design or manufacturing phases.Conse-quently,these micro-motors might generate anomalous noises during their operation,consequently exerting a substantial adverse influence on the overall comfort of drivers and passengers.Automobile micro-motors exhibit a diverse array of structural variations,consequently leading to the manifestation of a multitude of distinctive auditory irregularities.To address the identification of diverse forms of abnormal noise,this research presents a novel approach rooted in the utilization of vibro-acoustic fusion-convolutional neural network(VAF-CNN).This method entails the deployment of distinct network branches,each serving to capture disparate features from the multi-sensor data,all the while considering the auditory perception traits inherent in the human auditory sys-tem.The intermediary layer integrates the concept of adaptive weighting of multi-sensor features,thus affording a calibration mechanism for the features hailing from multiple sensors,thereby enabling a further refinement of features within the branch network.For optimal model efficacy,a feature fusion mechanism is implemented in the concluding layer.To substantiate the efficacy of the proposed approach,this paper initially employs an augmented data methodology inspired by modified SpecAugment,applied to the dataset of abnormal noise sam-ples,encompassing scenarios both with and without in-vehicle interior noise.This serves to mitigate the issue of limited sample availability.Subsequent comparative evaluations are executed,contrasting the performance of the model founded upon single-sensor data against other feature fusion models reliant on multi-sensor data.The experimental results substantiate that the suggested methodology yields heightened recognition accuracy and greater resilience against interference.Moreover,it holds notable practical significance in the engineering domain,as it furnishes valuable support for the targeted management of noise emanating from vehicle micro-motors.

Vehicle recognition and tracking based on simulated annealing chaotic particle swarm optimization-Gauss particle filter algorithm

Target recognition and tracking is an important research filed in the surveillance industry.Traditional target recognition and tracking is to track moving objects, however, for the detected moving objects the specific content can not be determined.In this paper, a multi-target vehicle recognition and tracking algorithm based on YOLO v5 network architecture is proposed.The specific content of moving objects are identified by the network architecture, furthermore, the simulated annealing chaotic mechanism is embedded in particle swarm optimization-Gauss particle filter algorithm.The proposed simulated annealing chaotic particle swarm optimization-Gauss particle filter algorithm(SA-CPSO-GPF) is used to track moving objects.The experiment shows that the algorithm has a good tracking effect for the vehicle in the monitoring range.The root mean square error(RMSE), running time and accuracy of the proposed method are superior to traditional methods.The proposed algorithm has very good application value.

Traffic light detection and recognition in intersections based on intelligent vehicle

To ensure revulsive driving of intelligent vehicles at intersections, a method is presented to detect and recognize the traffic lights. First, the stabling siding at intersections is detected by applying Hough transformation. Then, the colors of traffic lights are detected with color space transformation. Finally, self-associative memory is used to recognize the countdown characters of the traffic lights. Test results at 20 real intersections show that the ratio of correct stabling siding recognition reaches up to 90%;and the ratios of recognition of traffic lights and divided characters are 85% and 97%, respectively. The research proves that the method is efficient for the detection of stabling siding and is robust enough to recognize the characters from images with noise and broken edges.

Neural Network-Powered License Plate Recognition System Design

The development of scientific inquiry and research has yielded numerous benefits in the realm of intelligent traffic control systems, particularly in the realm of automatic license plate recognition for vehicles. The design of license plate recognition algorithms has undergone digitalization through the utilization of neural networks. In contemporary times, there is a growing demand for vehicle surveillance due to the need for efficient vehicle processing and traffic management. The design, development, and implementation of a license plate recognition system hold significant social, economic, and academic importance. The study aims to present contemporary methodologies and empirical findings pertaining to automated license plate recognition. The primary focus of the automatic license plate recognition algorithm was on image extraction, character segmentation, and recognition. The task of character segmentation has been identified as the most challenging function based on my observations. The license plate recognition project that we designed demonstrated the effectiveness of this method across various observed conditions. Particularly in low-light environments, such as during periods of limited illumination or inclement weather characterized by precipitation. The method has been subjected to testing using a sample size of fifty images, resulting in a 100% accuracy rate. The findings of this study demonstrate the project’s ability to effectively determine the optimal outcomes of simulations.

Intelligent Vehicle Auxiliary Handling System Based on the Internet of Things Technology

This paper proposes an intelligent vehicle auxiliary handling system based on Internet of Things(IoT)technology,featuring an innovative holding mechanism design that adjusts to the length and width of various vehicles.The system combines precise positioning using satellite tracking technology,intelligent recognition via OpenCV,and the interconnectivity of IoT.This intelligent vehicle auxiliary handling system can independently identify vehicle positions and plan optimal handling paths,eliminating the traditional reliance on manual operation.It offers efficient and accurate handling,setting a new trend in the handling industry.Additionally,the system integrates seamlessly with parking lot management systems,providing real-time updates on vehicle locations and statuses.This allows managers to monitor the parking lot operations clearly and efficiently.This intelligent coordination greatly enhances overall work efficiency and streamlines parking management.Overall,the innovative design of the intelligent vehicle auxiliary handling system represents a significant breakthrough in both function and performance,gaining user favor with its smooth operation.Looking ahead,continued technological advancements and the expansion of application fields will bring even more vitality and intelligence to societal development.

A Two-Stage Vehicle Type Recognition Method Combining the Most Effective Gabor Features

Vehicle type recognition(VTR)is an important research topic due to its significance in intelligent transportation systems.However,recognizing vehicle type on the real-world images is challenging due to the illumination change,partial occlusion under real traffic environment.These difficulties limit the performance of current state-of-art methods,which are typically based on single-stage classification without considering feature availability.To address such difficulties,this paper proposes a two-stage vehicle type recognition method combining the most effective Gabor features.The first stage leverages edge features to classify vehicles by size into big or small via a similarity k-nearest neighbor classifier(SKNNC).Further the more specific vehicle type such as bus,truck,sedan or van is recognized by the second stage classification,which leverages the most effective Gabor features extracted by a set of Gabor wavelet kernels on the partitioned key patches via a kernel sparse representation-based classifier(KSRC).A verification and correction step based on minimum residual analysis is proposed to enhance the reliability of the VTR.To improve VTR efficiency,the most effective Gabor features are selected through gray relational analysis that leverages the correlation between Gabor feature image and the original image.Experimental results demonstrate that the proposed method not only improves the accuracy of VTR but also enhances the recognition robustness to illumination change and partial occlusion.

Adaptive key SURF feature extraction and application in unmanned vehicle dynamic object recognition

A new method based on adaptive Hessian matrix threshold of finding key SRUF （ speeded up robust features） features is proposed and is applied to an unmanned vehicle for its dynamic object recognition and guided navigation. First, the object recognition algorithm based on SURF feature matching for unmanned vehicle guided navigation is introduced. Then, the standard local invariant feature extraction algorithm SRUF is analyzed, the Hessian Metrix is especially discussed, and a method of adaptive Hessian threshold is proposed which is based on correct matching point pairs threshold feedback under a close loop frame. At last, different dynamic object recognition experi- ments under different weather light conditions are discussed. The experimental result shows that the key SURF feature abstract algorithm and the dynamic object recognition method can be used for un- manned vehicle systems.

Markov chain-based platoon recognition model in mixed traffic with human-driven and connected and autonomous vehicles

Many vehicle platoons are interrupted while traveling on roads,especially at urban signalized intersections.One reason for such interruptions is the inability to exchange real-time information between traditional human-driven vehicles and intersection infrastructure.Thus,this paper develops a Markov chain-based model to recognize platoons.A simulation experiment is performed in Vissim based on field data extracted from video recordings to prove the model’s applicability.The videos,recorded with a high-definition camera,contain field driving data from three Tesla vehicles,which can achieve Level 2 autonomous driving.The simulation results show that the recognition rate exceeds 80%when the connected and autonomous vehicle penetration rate is higher than 0.7.Whether a vehicle is upstream or downstream of an intersection also affects the performance of platoon recognition.The platoon recognition model developed in this paper can be used as a signal control input at intersections to reduce the unnecessary interruption of vehicle platoons and improve traffic efficiency.

Cold Start Problem of Vehicle Model Recognition under Cross-Scenario Based on Transfer Learning

As a major function of smart transportation in smart cities,vehicle model recognition plays an important role in intelligent transportation.Due to the difference among different vehicle models recognition datasets,the accuracy of network model training in one scene will be greatly reduced in another one.However,if you don’t have a lot of vehicle model datasets for the current scene,you cannot properly train a model.To address this problem,we study the problem of cold start of vehicle model recognition under cross-scenario.Under the condition of small amount of datasets,combined with the method of transfer learning,load the DAN(Deep Adaptation Networks)and JAN(Joint Adaptation Networks)domain adaptation modules into the convolutional neural network AlexNet and ResNet,and get four models:AlexNet-JAN,AlexNet-DAN,ResNet-JAN,and ResNet-DAN which can achieve a higher accuracy at the beginning.Through experiments,transfer the vehicle model recognition from the network image dataset(source domain)to the surveillance-nature dataset(target domain),both Top-1 and Top-5 accuracy have been improved by at least 20%.

Recognition algorithm for turn light of front vehicle

Intelligent vehicle needs the turn light information of front vehicles to make decisions in autonomous navigation. A recognition algorithm was designed to get information of turn light. Approximated center segmentation method was designed to divide the front vehicle image into two parts by using geometry information. The number of remained pixels of vehicle image which was filtered by the morphologic feaatres was got by adaptive threshold method, and it was applied to recognizing the lights flashing. The experimental results show that the algorithm can not only distinguish the two turn lights of vehicle but also recognize the information of them. The algorithm is quiet effective, robust and satisfactory in real-time performance.

Automatic Vehicle License Recognition Based on Video Vehicular Detection System

Traditional methods of license character extraction cannot meet the requirements of recognition accuracy and speed rendered by the video vehicular detection system. Therefore, a license plate localization method based on multi-scale edge detection and a character segmentation algorithm based on Markov random field model is presented. Results of experiments demonstrate that the method yields more accurate license character extraction in contrast to traditional localization method based on edge detection by difference operator and character segmentation based on threshold. The accuracy increases from 90% to 94% under preferable illumination, while under poor condition, it increases more than 5%. When the two improved algorithms are used, the accuracy and speed of automatic license recognition meet the system＇s requirement even under the noisy circumstance or uneven illumination.

Indoor versus outdoor scene recognition for navigation of a micro aerial vehicle using spatial color gist wavelet descriptors

In the context of improved navigation for micro aerial vehicles,a new scene recognition visual descriptor,called spatial color gist wavelet descriptor(SCGWD),is proposed.SCGWD was developed by combining proposed Ohta color-GIST wavelet descriptors with census transform histogram(CENTRIST)spatial pyramid representation descriptors for categorizing indoor versus outdoor scenes.A binary and multiclass support vector machine(SVM)classifier with linear and non-linear kernels was used to classify indoor versus outdoor scenes and indoor scenes,respectively.In this paper,we have also discussed the feature extraction methodology of several,state-of-the-art visual descriptors,and four proposed visual descriptors(Ohta color-GIST descriptors,Ohta color-GIST wavelet descriptors,enhanced Ohta color histogram descriptors,and SCGWDs),in terms of experimental perspectives.The proposed enhanced Ohta color histogram descriptors,Ohta color-GIST descriptors,Ohta color-GIST wavelet descriptors,SCGWD,and state-of-the-art visual descriptors were evaluated,using the Indian Institute of Technology Madras Scene Classification Image Database two,an Indoor-Outdoor Dataset,and the Massachusetts Institute of Technology indoor scene classification dataset[(MIT)-67].Experimental results showed that the indoor versus outdoor scene recognition algorithm,employing SVM with SCGWDs,produced the highest classification rates(CRs)—95.48%and 99.82%using radial basis function kernel(RBF)kernel and 95.29%and 99.45%using linear kernel for the IITM SCID2 and Indoor-Outdoor datasets,respectively.The lowest CRs—2.08%and 4.92%,respectively—were obtained when RBF and linear kernels were used with the MIT-67 dataset.In addition,higher CRs,precision,recall,and area under the receiver operating characteristic curve values were obtained for the proposed SCGWDs,in comparison with state-of-the-art visual descriptors.

Factors Influence Hanoians’ Choice of Non-Motorized Transport Mode to Access Bus Stations

Hanoi’s rapid urbanization has led to a surge in private vehicle ownership, particularly motorcycles, amidst inadequate public transportation infrastructure. Despite government efforts, many still prefer motorized transport, citing mobility and safety concerns, exacerbated by insufficient pedestrian infrastructure. This study examines the motivations behind this reliance on motorized vehicles, particularly motorcycles, in Hanoi. Findings reveal safety and convenience as primary factors driving motorized transport use, especially for accessing bus stations. Economic incentives could promote non-motorized travel and public transport adoption. Policy implications highlight the importance of addressing economic factors and improving access infrastructure to manage motorized vehicle reliance and foster sustainable urban mobility in Hanoi.

Investigation and Optimization of Priority for Non-motor Vehicles in the Old Urban Area of Nanchang

Under the background of"people-oriented"thought and"green transportation",the idea of"priority for non-motor vehicles"came into being,which can improve the riding environment of non-motor vehicle riders to a certain extent.According to the current situation of priority for non-motor vehicles in the old urban area of Nanchang,through field investigation,questionnaire investigation and interview,this study summarized the existing problems,and put forward optimization suggestions for these problems,in order to provide reference for areas with similar conditions.

Connected and Autonomous Vehicles (CAVs) Challenges with Non-motorized Amenities Environments

With the deployment of Connected and Automated Vehicles in the coming decades,road transportation will experience a significant upheaval.CAVs(Connected and Autonomous Vehicles)have been a main emphasis of Transportation and the automotive sector,and the future of transportation system analysis is widely anticipated.The examination and future devel­opment of CAVs technology has been the subject of numerous researches.However,as three essential kinds of road users,pedestrians,bicyclists,and motorcyclists have experienced little to no handling.We explored the influ­ence of CAVs on non-motorized mobility in this article and seven various issues that CAVs face in the environment.

A Probabilistic Architecture of Long-Term Vehicle Trajectory Prediction for Autonomous Driving

In mixed and dynamic traffic environments,accurate long-term trajectory forecasting of surrounding vehicles is one of the indispensable preconditions for autonomous vehicles to accomplish reasonable behavioral decisions and guarantee driving safety.In this paper,we propose an integrated probabilistic architecture for long-term vehicle trajectory prediction,which consists of a driving inference model(DIM)and a trajectory prediction model(TPM).The DIM is designed and employed to accurately infer the potential driving intention based on a dynamic Bayesian network.The proposed DIM incorporates the basic traffic rules and multivariate vehicle motion information.To further improve the prediction accuracy and realize uncertainty estimation,we develop a Gaussian process-based TPM,considering both the short-term prediction results of the vehicle model and the driving motion characteristics.Afterward,the effectiveness of our novel approach is demonstrated by conducting experiments on a public naturalistic driving dataset under lane-changing scenarios.The superior performance on the task of long-term trajectory prediction is presented and verified by comparing with other advanced methods.

Deep Learning Based License Plate Number Recognition for Smart Cities

Smart city-aspiring urban areas should have a number of necessary elements in place to achieve the intended objective.Precise controlling and management of traffic conditions,increased safety and surveillance,and enhanced incident avoidance and management should be top priorities in smart city management.At the same time,Vehicle License Plate Number Recognition(VLPNR)has become a hot research topic,owing to several real-time applications like automated toll fee processing,traffic law enforcement,private space access control,and road traffic surveillance.Automated VLPNR is a computer vision-based technique which is employed in the recognition of automobiles based on vehicle number plates.The current research paper presents an effective Deep Learning(DL)-based VLPNR called DLVLPNR model to identify and recognize the alphanumeric characters present in license plate.The proposed model involves two main stages namely,license plate detection and Tesseract-based character recognition.The detection of alphanumeric characters present in license plate takes place with the help of fast RCNN with Inception V2 model.Then,the characters in the detected number plate are extracted using Tesseract Optical Character Recognition(OCR)model.The performance of DL-VLPNR model was tested in this paper using two benchmark databases,and the experimental outcome established the superior performance of the model compared to other methods.

Vehicle Real-time Location Based on Visual Perception Model

Vehicle recognition system (VRS) plays a very important role in the field of intelligent transportation systems.A novel and intuitive method is proposed for vehicle location.The method we provide for vehicle location is based on human visual perception model technique. The perception color space HSI in this algorithm is adopted.Three color components of a color image and more potential edge patterns are integrated for solving the feature extraction problem.A fast and automatic threshold technique based on human visual perception model is also developed.The vertical edge projection and horizontal edge projection are adopted for locating left-right boundary of vehicle and top-bottom boundary of vehicle, respectively. Very promising experimental results are obtained using real-time vehicle image sequences, which have confirmed that this proposed location vehicle method is efficient and reliable, and its calculation speed meets the needs of the VRS.