Clarifying China’s position in the global system is an important logical basis for developing national diplomacy.Although much research has been done on China’s development status,most studies have been based on cou...Clarifying China’s position in the global system is an important logical basis for developing national diplomacy.Although much research has been done on China’s development status,most studies have been based on country comparisons or institutional en-vironment.In today’s networked era in which the global economy,trade,personnel,and information are closely connected,studies on China’s global position and its status changes and influencing factors in multiple contact networks are still insufficient.In this study,from the perspective of diverse global contact networks,we constructed economic,cultural,and political influence indices to explore the changes and influencing factors on China’s status in the global system from 2005 to 2018.The results show that during the study period,China’s global influence in the fields of economic ties,cultural exchanges,and political contacts increased significantly,but its influ-ence in the fields of cultural exchanges and political contacts lagged far economic ties.The pattern of China’s economic influence on various economies around the world has shown a transformation from an‘upright pyramid’to an‘inverted pyramid’structure.The proportion of these economies in low-influence zones has decreased from more than 60%in 2005 to less than 20%in 2018.China’s cultural and political influence on various economies around the world has increased significantly;however,for the former,the percentage of high-influence areas is still less than 20%,whereas for the latter the percentage of these economies in medium-and high-influence areas is still less than 50%.Analyses such as a scatter plot matrix show that geographical proximity,economic globalization,close cooperation with developing countries,and a proactive and peaceful foreign policy are important factors in improving China’s status in the diverse global network system.展开更多
Taking the Paleogene Shahejie Formation in Nanpu sag of Bohai Bay Basin as an example,this study comprehensively utilizes seismic,mud logging,well logging,physical property analysis and core thin section data to inves...Taking the Paleogene Shahejie Formation in Nanpu sag of Bohai Bay Basin as an example,this study comprehensively utilizes seismic,mud logging,well logging,physical property analysis and core thin section data to investigate the metamorphic reservoir formed by contact metamorphism after igneous rock intrusion.(1)A geological model of the igneous intrusion contact met amorphic system is proposed,which can be divided into five structural layers vertically:the intrusion,upper metamorphic aureole,lower metamorphic aureole,normal sedimentary layers on the roof and floor.(2)The intrusion is characterized by xenoliths indicating intrusive facies at the top,regular changes in rock texture and mineral crystallization from the center to the edge on a microscopic scale,and low-angle oblique penetrations of the intrusion through sedimentary strata on a macroscopic scale.The metamorphic aureole has characteristics such as sedimentary rocks as the host rock,typical palimpsest textures developed,various low-temperature thermal metamorphic minerals developed,and medium-low grade thermal metamorphic rocks as the lithology.(3)The reservoir in contact metamorphic aureole has two types of reservoir spaces:matrix pores and fractures.The matrix pores are secondary"intergranular pores"distributed around metamorphic minerals after thermal metamorphic transformation in metasandstones.The fractures are mainly structural fractures and intrusive compressive fractures in metamudstones.The reservoirs generally have three spatial distribution characteristics:layered,porphyritic and hydrocarbon impregnation along fracture.(4)The distribution of reservoirs in the metamorphic aureole is mainly controlled by the intensity of thermal baking.Furthermore,the distribution of favorable reservoirs is controlled by the coupling of favorable lithofacies and thermal contact metamorphism,intrusive compression and hydrothermal dissolution.The proposal and application of the geological model of the intrusion contact metamorphic system are expected to promote the discovery of exploration targets of contact metamorphic rock in Nanpu sag,and provide a reference for the study and exploration of deep contact metamorphic rock reservoirs in the Bohai Bay Basin.展开更多
The triboelectric nanogenerator(TENG)can effectively collect energy based on contact electrification(CE)at diverse interfaces,including solid–solid,liquid–solid,liquid–liquid,gas–solid,and gas–liquid.This enables...The triboelectric nanogenerator(TENG)can effectively collect energy based on contact electrification(CE)at diverse interfaces,including solid–solid,liquid–solid,liquid–liquid,gas–solid,and gas–liquid.This enables energy harvesting from sources such as water,wind,and sound.In this review,we provide an overview of the coexistence of electron and ion transfer in the CE process.We elucidate the diverse dominant mechanisms observed at different interfaces and emphasize the interconnectedness and complementary nature of interface studies.The review also offers a comprehensive summary of the factors influencing charge transfer and the advancements in interfacial modification techniques.Additionally,we highlight the wide range of applications stemming from the distinctive characteristics of charge transfer at various interfaces.Finally,this review elucidates the future opportunities and challenges that interface CE may encounter.We anticipate that this review can offer valuable insights for future research on interface CE and facilitate the continued development and industrialization of TENG.展开更多
Tan's contact C is an important quantity measuring the two-body correlations at short distances in a dilute system.Here we make use of the technique of exactly solved models to study the thermal-contact capacity K...Tan's contact C is an important quantity measuring the two-body correlations at short distances in a dilute system.Here we make use of the technique of exactly solved models to study the thermal-contact capacity K_(T),i.e.,the derivative of C with respect to temperature in the attractive Gaudin-Yang model.It is found that K_(T) is useful in identifying the low temperature phase diagram,and using the obtained analytical expression of K_(T),we study its critical behavior and the scaling law.Especially,we show K_(T) versus temperature and thus the non-monotonic tendency of C in a tiny interval,for both spin-balanced and imbalanced phases.Such a phenomenon is merely observed in multi-component systems such as SU(2)Fermi gases and spinor bosons,indicating the crossover from the Tomonaga-Luttinger liquid to the spin-coherent liquid.展开更多
BACKGROUND The four components that make up the current dual-mobility artificial hip joint design are the femoral head,the inner liner,the outer liner as a metal cover to prevent wear,and the acetabular cup.The acetab...BACKGROUND The four components that make up the current dual-mobility artificial hip joint design are the femoral head,the inner liner,the outer liner as a metal cover to prevent wear,and the acetabular cup.The acetabular cup and the outer liner were constructed of 316L stainless steel.At the same time,the inner liner was made of ultra-high-molecular-weight polyethylene(UHMWPE).As this new dual-mobility artificial hip joint has not been researched extensively,more tribological research is needed to predict wear.The thickness of the inner liner is a significant component to consider when calculating the contact pressure.AIM To make use of finite element analysis to gain a better understanding of the contact behavior in various inner liner thicknesses on a new model of a dual-mobility artificial hip joint,with the ultimate objective of determining the inner liner thickness that was most suitable for this particular type of dual-mobility artificial hip joint.METHODS In this study,the size of the femoral head was compared between two diameters(28 mm and 36 mm)and eight inner liner thicknesses ranging from 5 mm to 12 mm.Using the finite element method,the contact parameters,including the maximum contact pressure and contact area,have been evaluated in light of the Hertzian contact theory.The simulation was performed statically with dissipated energy and asymmetric behavior.The types of interaction were surface-to-surface contact and normal contact behavior.RESULTS The maximum contact pressures in the inner liner(UHMWPE)at a head diameter of 28 mm and 36 mm are between 3.7-13.5 MPa and 2.7-10.4 MPa,respectively.The maximum von Mises of the inner liner,outer liner,and acetabular cup are 2.4–11.4 MPa,15.7–44.3 MPa,and 3.7–12.6 MPa,respectively,for 28 mm head.Then the maximum von Mises stresses of the 36 mm head are 1.9-8.9 MPa for the inner liner,9.9-32.8 MPa for the outer liner,and 2.6-9.9 MPa for the acetabular cup.A head with a diameter of 28 mm should have an inner liner with a thickness of 12 mm.Whereas the head diameter was 36 mm,an inner liner thickness of 8 mm was suitable.CONCLUSION The contact pressures and von Mises stresses generated during this research can potentially be exploited in estimating the wear of dual-mobility artificial hip joints in general.Contact pressure and von Mises stress reduce with an increasing head diameter and inner liner’s thickness.Present findings would become one of the references for orthopedic surgery for choosing suitable bearing geometric parameter of hip implant.展开更多
The ohmic contact interface between diamond and metal is essential for the application of diamond detectors.Surface modification can significantly affect the contact performance and eliminate the interface polarizatio...The ohmic contact interface between diamond and metal is essential for the application of diamond detectors.Surface modification can significantly affect the contact performance and eliminate the interface polarization effect.However,the radiation stability of a diamond detector is also sensitive to surface modification.In this work,the influence of surface modification technology on a diamond ohmic contact under high-energy radiation was investigated.Before radiation,the specific contact resistivities(ρc)between Ti/Pt/Au-hydrogen-terminated diamond(H-diamond)and Ti/Pt/Au-oxygenterminated diamond(O-diamond)were 2.0×10^(-4)W·cm^(2) and 4.3×10^(-3)Wcm^(2),respectively.After 10 MeV electron radiation,the ρc of Ti/Pt/Au H-diamond and Ti/Pt/Au O-diamond were 5.3×10^(-3)W·cm^(2)and 9.1×10^(-3)W·cm^(2),respectively.The rates of change of ρc of H-diamond and O-diamond after radiation were 2550%and 112%,respectively.The electron radiation promotes bond reconstruction of the diamond surface,resulting in an increase in ρc.展开更多
In this study,the effects of stacked nanosheets and the surrounding interphase zone on the resistance of the contact region between nanosheets and the tunneling conductivity of samples are evaluated with developed equ...In this study,the effects of stacked nanosheets and the surrounding interphase zone on the resistance of the contact region between nanosheets and the tunneling conductivity of samples are evaluated with developed equations superior to those previously reported.The contact resistance and nanocomposite conductivity are modeled by several influencing factors,including stack properties,interphase depth,tunneling size,and contact diameter.The developed model's accuracy is verified through numerous experimental measurements.To further validate the models and establish correlations between parameters,the effects of all the variables on contact resistance and nanocomposite conductivity are analyzed.Notably,the contact resistance is primarily dependent on the polymer tunnel resistivity,contact area,and tunneling size.The dimensions of the graphene nanosheets significantly influence the conductivity,which ranges from 0 S/m to90 S/m.An increased number of nanosheets in stacks and a larger gap between them enhance the nanocomposite's conductivity.Furthermore,the thicker interphase and smaller tunneling size can lead to higher sample conductivity due to their optimistic effects on the percolation threshold and network efficacy.展开更多
The grid-based multi-velocity field technique has become increasingly popular for simulating the Material Point Method(MPM)in contact problems.However,this traditional technique has some shortcomings,such as(1)early c...The grid-based multi-velocity field technique has become increasingly popular for simulating the Material Point Method(MPM)in contact problems.However,this traditional technique has some shortcomings,such as(1)early contact and contact penetration can occur when the contact conditions are unsuitable,and(2)the method is not available for contact problems involving rigid-nonrigid materials,which can cause numerical instability.This study presents a new hybrid contact approach for the MPM to address these limitations to simulate the soil and structure interactions.The approach combines the advantages of point-point and point-segment contacts to implement contact detection,satisfying the impenetrability condition and smoothing the corner contact problem.The proposed approach is first validated through a disk test on an inclined slope.Then,several typical cases,such as granular collapse,bearing capacity,and deformation of a flexible retaining wall,are simulated to demonstrate the robustness of the proposed approach compared with FEM or analytical solutions.Finally,the proposed method is used to simulate the impact of sand flow on a deformable structure.The results show that the proposed contact approach can well describe the phenomenon of soil-structure interaction problems.展开更多
Gears are pivotal in mechanical drives,and gear contact analysis is a typically difficult problem to solve.Emerging isogeometric analysis(IGA)methods have developed new ideas to solve this problem.In this paper,a thre...Gears are pivotal in mechanical drives,and gear contact analysis is a typically difficult problem to solve.Emerging isogeometric analysis(IGA)methods have developed new ideas to solve this problem.In this paper,a threedimensional body parametric gear model of IGA is established,and a theoretical formula is derived to realize single-tooth contact analysis.Results were benchmarked against those obtained from commercial software utilizing the finite element analysis(FEA)method to validate the accuracy of our approach.Our findings indicate that the IGA-based contact algorithmsuccessfullymet theHertz contact test.When juxtaposed with the FEA approach,the IGAmethod demonstrated fewer node degrees of freedomand reduced computational units,all whilemaintaining comparable accuracy.Notably,the IGA method appeared to exhibit consistency in analysis accuracy irrespective of computational unit density,and also significantlymitigated non-physical oscillations in contact stress across the tooth width.This underscores the prowess of IGA in contact analysis.In conclusion,IGA emerges as a potent tool for addressing contact analysis challenges and holds significant promise for 3D gear modeling,simulation,and optimization of various mechanical components.展开更多
Although there is currently no unified standard theoretical formula for calculating the contact stress of cylindrical gears with a circular arc tooth trace(referred to as CATT gear),a mathematical model for determinin...Although there is currently no unified standard theoretical formula for calculating the contact stress of cylindrical gears with a circular arc tooth trace(referred to as CATT gear),a mathematical model for determining the contact stress of CATT gear is essential for studying how parameters affect its contact stress and building the contact stress limit state equation for contact stress reliability analysis.In this study,a mathematical relationship between design parameters and contact stress is formulated using the KrigingMetamodel.To enhance the model’s accuracy,we propose a new hybrid algorithm that merges the genetic algorithm with the Quantum Particle Swarm optimization algorithm,leveraging the strengths of each.Additionally,the“parental inheritance+self-learning”optimization model is used to fine-tune the KrigingMetamodel’s parameters.Following this,amathematicalmodel for calculating the contact stress of Variable Hyperbolic Circular-Arc-Tooth-Trace(VH-CATT)gears using the optimized Kriging model was developed.We then examined how different gear parameters affect the VH-CATT gears’contact stress.Our simulation results show:(1)Improvements in R2,RMSE,and RMAE.R2 rose from0.9852 to 0.9974(a 1.22%increase),nearing 1,suggesting the optimized Kriging Metamodel’s global error is minimized.Meanwhile,RMSE dropped from3.9210 to 1.6492,a decline of 57.94%.The global error of the GA-IQPSO-Kriging algorithm was also reduced,with RMAE decreasing by 58.69%from 0.1823 to 0.0753,showing the algorithm’s enhanced precision.In a comparison of ten experimental groups selected randomly,the GA-IQPSO-Kriging and FEM-based contact analysis methods were used to measure contact stress.Results revealed a maximum error of 12.11667 MPA,which represents 2.85%of the real value.(2)Several factors,including the pressure angle,tooth width,modulus,and tooth line radius,are inversely related to contact stress.The descending order of their impact on the contact stress is:tooth line radius>modulus>pressure angle>tooth width.(3)Complex interactions are noted among various parameters.Specifically,when the tooth line radius interacts with parameters such as pressure angle,tooth width,and modulus,the resulting stress contour is nonlinear,showcasing amultifaceted contour plane.However,when tooth width,modulus,and pressure angle interact,the stress contour is nearly linear,and the contour plane is simpler,indicating a weaker coupling among these factors.展开更多
Due to a complex geological and biotic history,the Isthmus of Tehuantepec(IT),has been long recognized as a driver for the evolutionary divergence of numerous lowland and highland taxa.Widely distributed in the lowlan...Due to a complex geological and biotic history,the Isthmus of Tehuantepec(IT),has been long recognized as a driver for the evolutionary divergence of numerous lowland and highland taxa.Widely distributed in the lowlands of the American continent,the White-Tipped Dove(Leptotila verreauxi)is a polytypic species with 13 recognized subspecies.Four of these have been recorded in Mexico,and the distribution of three abuts at the IT,suggesting a contact zone.To estimate phylogenetic patterns,divergence times and genetic differentiation,we examined two mt DNA(ND2 and COI)and one n DNA(β-fibint 7)markers.We also used correlative ecological niche models(ENM)to assess whether ecological differences across the IT may have acted as a biogeographical boundary.We estimated paleodistributions during the Middle Holocene,Last Glacial Maximum and Last Interglacial,to evaluate the influence of climate changes on the distribution and demographic changes.Our results showed genetically distinct lineages that diverged approximately 2.5 million years ago.Climatic and ecological factors may have played a dual role in promoting differentiation,but also in the formation of a secondary contact zone in the southern IT.Our ecological niche comparisons indicated that the ecological niche of sympatric lineages at the IT are not identical,suggesting niches divergence;in addition,environmental niche models across the region indicated no abrupt biogeographic barriers,but the presence of regions with low suitability.These results suggest that genetic differentiation originated by a vicariant event probably related to environmental factors,favored the evolution of different ecological niches.Also,the absence of a biogeographic barrier but the presence of less suitable areas in the contact regions,suggest that secondary contact zones may be also maintained by climatic factors for the eastern group,but also by biotic interactions for the western group.展开更多
Detumbling operation toward a rotating target with nutation is meaningful for debris removal but challenging. In this study, a deformable end-effector is first designed based on the requirements for contacting the nut...Detumbling operation toward a rotating target with nutation is meaningful for debris removal but challenging. In this study, a deformable end-effector is first designed based on the requirements for contacting the nutating target. A dual-arm robotic system installed with the deformable end-effectors is modeled and the movement of the end-tips is analyzed. The complex operation of the contact toward a nutating target places strict requirements on control accuracy and controller robustness. Thus, an improvement of the tracking error transformation is proposed and an adaptive sliding mode controller with prescribed performance is designed to guarantee the fast and precise motion of the effector during the contact detumbling.Finally, by employing the proposed effector and the controller,numerical simulations are carried out to verify the effectiveness and efficiency of the contact detumbling toward a nutating target.展开更多
Understanding and characterizing rough contact and wavy surfaces are essential for developing effective strategies to mitigate wear,optimize lubrication,and enhance the overall performance and durability of mechanical...Understanding and characterizing rough contact and wavy surfaces are essential for developing effective strategies to mitigate wear,optimize lubrication,and enhance the overall performance and durability of mechanical systems.The sliding friction contact problem between a thermoelectric(TE)half-plane and a rigid solid with a periodic wavy surface is the focus of this investigation.To simplify the problem,we utilize mixed boundary conditions,leading to a set of singular integral equations(SIEs)with the Hilbert kernels.The analytical solutions for the energy flux and electric current density are obtained by the variable transform method in the context of the electric and temperature field.The contact problem for the elastic field is transformed into the second-kind SIE and solved by the Jacobi polynomials.Notably,the smoothness of the wavy contact surface ensures that there are no singularities in the surface contact stress,and ensures that it remains free at the contact edge.Based on the plane strain theory of elasticity,the analysis primarily examines the correlation between the applied load and the effective contact area.The distribution of the normal stress on the surface with or without TE loads is discussed in detail for various friction coefficients.Furthermore,the obtained results indicate that the in-plane stress decreases behind the trailing edge,while it increases ahead of the trailing edge when subjected to TE loads.展开更多
The formation of low-resistance Ohmic contacts in Ga_(2)O_(3) is crucial for high-performance electronic devices. Conventionally, a titanium/gold(Ti/Au) electrode is rapidly annealed to achieve Ohmic contacts, resulti...The formation of low-resistance Ohmic contacts in Ga_(2)O_(3) is crucial for high-performance electronic devices. Conventionally, a titanium/gold(Ti/Au) electrode is rapidly annealed to achieve Ohmic contacts, resulting in mutual diffusion of atoms at the interface. However, the specific role of diffusing elements in Ohmic contact formation remains unclear.In this work, we investigate the contribution of oxygen atom diffusion to the formation of Ohmic contacts in Ga_(2)O_(3). We prepare a Ti/Au electrode on a single crystal substrate and conduct a series of electrical and structural characterizations.Using density functional theory, we construct a model of the interface and calculate the charge density, partial density of states, planar electrostatic potential energy, and I–V characteristics. Our results demonstrate that the oxygen atom diffusion effectively reduces the interface barrier, leading to low-resistance Ohmic contacts in Ga_(2)O_(3). These findings provide valuable insights into the underlying mechanisms of Ohmic contact formation and highlight the importance of considering the oxygen atom diffusion in the design of Ga_(2)O_(3)-based electronic devices.展开更多
In this paper,a frictional contact problem between an electro-elastic body and an electrically conductive foundation is studied.The contact is modeled by normal compliance with finite penetration and a version of Coul...In this paper,a frictional contact problem between an electro-elastic body and an electrically conductive foundation is studied.The contact is modeled by normal compliance with finite penetration and a version of Coulomb’s law of dry friction in which the coefficient of friction depends on the slip.In addition,the effects of the electrical conductivity of the foundation are taken into account.This model leads to a coupled system of the quasi-variational inequality of the elliptic type for the displacement and the nonlinear variational equation for the electric potential.The existence of a weak solution is proved by using an abstract result for elliptic variational inequalities and a fixed point argument.Then,a finite element approximation of the problem is presented.Under some regularity conditions,an optimal order error estimate of the approximate solution is derived.Finally,a successive iteration technique is used to solve the problem numerically and a convergence result is established.展开更多
The utilization of solid-state electrolytes(SSEs)presents a promising solution to the issues of safety concern and shuttle effect in Li–S batteries,which has garnered significant interest recently.However,the high in...The utilization of solid-state electrolytes(SSEs)presents a promising solution to the issues of safety concern and shuttle effect in Li–S batteries,which has garnered significant interest recently.However,the high interfacial impedances existing between the SSEs and the electrodes(both lithium anodes and sulfur cathodes)hinder the charge transfer and intensify the uneven deposition of lithium,which ultimately result in insufficient capacity utilization and poor cycling stability.Hence,the reduction of interfacial resistance between SSEs and electrodes is of paramount importance in the pursuit of efficacious solid-state batteries.In this review,we focus on the experimental strategies employed to enhance the interfacial contact between SSEs and electrodes,and summarize recent progresses of their applications in solidstate Li–S batteries.Moreover,the challenges and perspectives of rational interfacial design in practical solid-state Li–S batteries are outlined as well.We expect that this review will provide new insights into the further technique development and practical applications of solid-state lithium batteries.展开更多
Purpose-Under the high-speed operating conditions,the effects of wheelset elastic deformation on the wheel rail dynamic forces will become more notable compared to the low-speed condition.In order to meet different an...Purpose-Under the high-speed operating conditions,the effects of wheelset elastic deformation on the wheel rail dynamic forces will become more notable compared to the low-speed condition.In order to meet different analysis requirements and selecting appropriate models to analyzing the wheel rail interaction,it is crucial to understand the influence of wheelset flexibility on the wheel-rail dynamics under different speeds and track excitations condition.Design/methodology/approach-The wheel rail contact points solving method and vehicle dynamics equations considering wheelset flexibility in the trajectory body coordinate system were investigated in this paper.As for the wheel-rail contact forces,which is a particular force element in vehicle multibody system,a method for calculating the Jacobian matrix of the wheel-rail contact force is proposed to better couple the wheel-rail contact force calculation with the vehicle dynamics response calculation.Based on the flexible wheelset modeling approach in this paper,two vehicle dynamic models considering the wheelset as both elastic and rigid bodies are established,two kinds of track excitations,namely normal measured track irregularities and short-wave irregularities are used,wheel-rail geometric contact characteristic and wheel-rail contact forces in both time and frequency domains are compared with the two models in order to study the influence of flexible wheelset rotation effect on wheel rail contact force.Findings-Under normal track irregularity excitations,the amplitudes of vertical,longitudinal and lateral forces computed by the flexible wheelset model are smaller than those of the rigid wheelset model,and the virtual penetration and equivalent contact patch are also slightly smaller.For the flexible wheelset model,the wheel rail longitudinal and lateral creepages will also decrease.The higher the vehicle speed,the larger the differences in wheel-rail forces computed by the flexible and rigid wheelset model.Under track short-wave irregularity excitations,the vertical force amplitude computed by the flexible wheelset is also smaller than that of the rigid wheelset.However,unlike the excitation case of measured track irregularity,under short-wave excitations,for the speed within the range of 200 to 350 km/h,the difference in the amplitude of the vertical force between the flexible and rigid wheelset models gradually decreases as the speed increase.This is partly due to the contribution of wheelset's elastic vibration under short-wave excitations.For low-frequency wheel-rail force analysis problems at speeds of 350 km/h and above,as well as high-frequency wheel-rail interaction analysis problems under various speed conditions,the flexible wheelset model will give results agrees better with the reality.Originality/value-This study provides reference for the modeling method of the flexible wheelset and the coupling method of wheel-rail contact force to the vehicle multibody dynamics system.Furthermore,by comparative research,the influence of wheelset flexibility and rotation on wheel-rail dynamic behavior are obtained,which is useful to the application scope of rigid and flexible wheelset models.展开更多
Aero engine seal coatings can effectively improve the air tightness of aircraft engines and increase fuel efficiency.However,due to the frictional forces between the blades and the coating,the coating often flakes off...Aero engine seal coatings can effectively improve the air tightness of aircraft engines and increase fuel efficiency.However,due to the frictional forces between the blades and the coating,the coating often flakes off,resulting in damage to the blades and causing eco-nomic losses.Therefore,it is necessary to analyze the friction between the blades and the coating.In this paper,three ceramic-based high-temperature seal coatings with different polyphenylene ester contents and a pure Yttria-stabilised zirconia coating were prepared by atmo-spheric plasma spraying(APS).The hardness and modulus of elasticity of the coated surfaces were obtained by hardness and modulus of elasticity tests,and the coatings were subjected to high-speed touch abrasion tests.The Hertzian contact model was used to calculate the maximum normal contact load on the coating during the process.The test values were compared with the theoretical values and it was found that the calculated values were always greater than the test values.In order to make the Hertzian contact model more accurate in calculating the touching and abrasion forces,the contact coefficients in the Hertzian contact model were optimized.Substituting the optimized coeffi-cients into the Hertzian contact model,the results show that the calculated results after optimizing the coefficients are much closer to the test values,with deviations from the test values ranging from 1%to 38%.展开更多
Objective: To explore the pre-treatment and efficacy analysis of comprehensive anti-inflammatory treatment for lymphedema in patients with irritating contact dermatitis. Method: Convenience sampling method was used to...Objective: To explore the pre-treatment and efficacy analysis of comprehensive anti-inflammatory treatment for lymphedema in patients with irritating contact dermatitis. Method: Convenience sampling method was used to observe the skin of 160 patients with upper limb lymphedema admitted to the lymphedema outpatient department of our hospital. They were divided into an observation group (80 cases) and a control group (80 cases), and both groups received a course of comprehensive anti-inflammatory treatment (20 treatments). The control group received routine skin care;On the basis of the control group, the observation group received pre-treatment of the affected limb skin: Laofuzi herbal ointment was applied externally to the prone areas of irritating contact dermatitis (such as the upper arm, inner forearm, and cubital fossa). Result: The incidence of irritating contact dermatitis in the observation group was significantly lower than that in the control group (P 0.05). Patients in the observation group felt significantly better in terms of comfort, skin moisture, and itching relief after being wrapped with low elasticity bandages than those in the control group (P Conclusion: Preventive treatment can effectively reduce the incidence of irritating contact dermatitis, prolong the time of stress treatment, thereby increasing efficacy and improving patient compliance.展开更多
Objective:Based on the theory of“Knowledge,Attitude,Practice,”health education was carried out for close contact with tuberculosis(TB)at a university in Beijing,and its impact on the students’awareness of TB was st...Objective:Based on the theory of“Knowledge,Attitude,Practice,”health education was carried out for close contact with tuberculosis(TB)at a university in Beijing,and its impact on the students’awareness of TB was studied.This study could provide a reference for effective health education interventions among close contacts of TB in undergraduates.Methods:102 undergraduates who had close contact with one confirmed case of pulmonary TB in April 2021 at a university were randomly divided into a control group and an intervention group.The intervention group was given the“Knowledge,Attitude,Practice”health education intervention by professionally trained doctors,and were asked to complete a self-designed TB-related questionnaire before and after the intervention.Both groups performed the Tuberculin Skin Test(TST)and chest X-ray(CR)examination.Results:The rate of the TST test was 18.6%,and CR examination showed 0 cases of pulmonary TB.The survey results showed that the TB awareness rate(96.1%,49/51)in the intervention group was significantly higher than that of the control group(51.0%,26/51),and the differences in awareness rate between the two groups were statistically significant(P<0.05).Regarding the attitude/skills toward TB,the prevalence rate of tuberculosis-related attitude/behavior in the intervention group(94.1%,47/51)was significantly higher than that of the control group(60.8%,31/51),and the differences between the two groups were statistically significant(P<0.05).Conclusion:Both self-controlled and parallel-controlled studies showed that the health education intervention of“Knowledge,Attitude,Practice”improved the awareness of TB among close contacts of TB in undergraduates.展开更多
基金Under the auspices of National Natural Science Foundation of China(No.42201181,42171181)Fundamental Research Funds for the Central Universities(No.2412022QD002)The Medium and Long-term Major Training Foundation of Philosophy and Social Sciences of Northeast Normal University(No.22FR006)。
文摘Clarifying China’s position in the global system is an important logical basis for developing national diplomacy.Although much research has been done on China’s development status,most studies have been based on country comparisons or institutional en-vironment.In today’s networked era in which the global economy,trade,personnel,and information are closely connected,studies on China’s global position and its status changes and influencing factors in multiple contact networks are still insufficient.In this study,from the perspective of diverse global contact networks,we constructed economic,cultural,and political influence indices to explore the changes and influencing factors on China’s status in the global system from 2005 to 2018.The results show that during the study period,China’s global influence in the fields of economic ties,cultural exchanges,and political contacts increased significantly,but its influ-ence in the fields of cultural exchanges and political contacts lagged far economic ties.The pattern of China’s economic influence on various economies around the world has shown a transformation from an‘upright pyramid’to an‘inverted pyramid’structure.The proportion of these economies in low-influence zones has decreased from more than 60%in 2005 to less than 20%in 2018.China’s cultural and political influence on various economies around the world has increased significantly;however,for the former,the percentage of high-influence areas is still less than 20%,whereas for the latter the percentage of these economies in medium-and high-influence areas is still less than 50%.Analyses such as a scatter plot matrix show that geographical proximity,economic globalization,close cooperation with developing countries,and a proactive and peaceful foreign policy are important factors in improving China’s status in the diverse global network system.
基金Supported by the Basic Science Research Fund Project of PetroChina Affiliated Institute(2020D-5008-06)。
文摘Taking the Paleogene Shahejie Formation in Nanpu sag of Bohai Bay Basin as an example,this study comprehensively utilizes seismic,mud logging,well logging,physical property analysis and core thin section data to investigate the metamorphic reservoir formed by contact metamorphism after igneous rock intrusion.(1)A geological model of the igneous intrusion contact met amorphic system is proposed,which can be divided into five structural layers vertically:the intrusion,upper metamorphic aureole,lower metamorphic aureole,normal sedimentary layers on the roof and floor.(2)The intrusion is characterized by xenoliths indicating intrusive facies at the top,regular changes in rock texture and mineral crystallization from the center to the edge on a microscopic scale,and low-angle oblique penetrations of the intrusion through sedimentary strata on a macroscopic scale.The metamorphic aureole has characteristics such as sedimentary rocks as the host rock,typical palimpsest textures developed,various low-temperature thermal metamorphic minerals developed,and medium-low grade thermal metamorphic rocks as the lithology.(3)The reservoir in contact metamorphic aureole has two types of reservoir spaces:matrix pores and fractures.The matrix pores are secondary"intergranular pores"distributed around metamorphic minerals after thermal metamorphic transformation in metasandstones.The fractures are mainly structural fractures and intrusive compressive fractures in metamudstones.The reservoirs generally have three spatial distribution characteristics:layered,porphyritic and hydrocarbon impregnation along fracture.(4)The distribution of reservoirs in the metamorphic aureole is mainly controlled by the intensity of thermal baking.Furthermore,the distribution of favorable reservoirs is controlled by the coupling of favorable lithofacies and thermal contact metamorphism,intrusive compression and hydrothermal dissolution.The proposal and application of the geological model of the intrusion contact metamorphic system are expected to promote the discovery of exploration targets of contact metamorphic rock in Nanpu sag,and provide a reference for the study and exploration of deep contact metamorphic rock reservoirs in the Bohai Bay Basin.
基金the National Natural Science Foundation of China for Excellent Young Scholar(Grant No.52322313)National Key R&D Project from Minister of Science and Technology(2021YFA1201601)+6 种基金National Science Fund of China(62174014)Beijing Nova program(Z201100006820063)Youth Innovation Promotion Association CAS(2021165)Innovation Project of Ocean Science and Technology(22-3-3-hygg-18-hy)State Key Laboratory of New Ceramic and Fine Processing Tsinghua University(KFZD202202)Fundamental Research Funds for the Central Universities(292022000337)Young Top-Notch Talents Program of Beijing Excellent Talents Funding(2017000021223ZK03).
文摘The triboelectric nanogenerator(TENG)can effectively collect energy based on contact electrification(CE)at diverse interfaces,including solid–solid,liquid–solid,liquid–liquid,gas–solid,and gas–liquid.This enables energy harvesting from sources such as water,wind,and sound.In this review,we provide an overview of the coexistence of electron and ion transfer in the CE process.We elucidate the diverse dominant mechanisms observed at different interfaces and emphasize the interconnectedness and complementary nature of interface studies.The review also offers a comprehensive summary of the factors influencing charge transfer and the advancements in interfacial modification techniques.Additionally,we highlight the wide range of applications stemming from the distinctive characteristics of charge transfer at various interfaces.Finally,this review elucidates the future opportunities and challenges that interface CE may encounter.We anticipate that this review can offer valuable insights for future research on interface CE and facilitate the continued development and industrialization of TENG.
基金Project supported by the National Natural Science Foundation of China (Grant Nos.12104372,12047511,and 12247103)the Youth Innovation Team of Shaanxi Universities。
文摘Tan's contact C is an important quantity measuring the two-body correlations at short distances in a dilute system.Here we make use of the technique of exactly solved models to study the thermal-contact capacity K_(T),i.e.,the derivative of C with respect to temperature in the attractive Gaudin-Yang model.It is found that K_(T) is useful in identifying the low temperature phase diagram,and using the obtained analytical expression of K_(T),we study its critical behavior and the scaling law.Especially,we show K_(T) versus temperature and thus the non-monotonic tendency of C in a tiny interval,for both spin-balanced and imbalanced phases.Such a phenomenon is merely observed in multi-component systems such as SU(2)Fermi gases and spinor bosons,indicating the crossover from the Tomonaga-Luttinger liquid to the spin-coherent liquid.
基金Supported by World Class Research Universitas Diponegoro,No.118-23/UN7.6.1/PP/2021Penelitian Fundamental–Reguler,No.449A-32/UN7.D2/PP/VI/2023.
文摘BACKGROUND The four components that make up the current dual-mobility artificial hip joint design are the femoral head,the inner liner,the outer liner as a metal cover to prevent wear,and the acetabular cup.The acetabular cup and the outer liner were constructed of 316L stainless steel.At the same time,the inner liner was made of ultra-high-molecular-weight polyethylene(UHMWPE).As this new dual-mobility artificial hip joint has not been researched extensively,more tribological research is needed to predict wear.The thickness of the inner liner is a significant component to consider when calculating the contact pressure.AIM To make use of finite element analysis to gain a better understanding of the contact behavior in various inner liner thicknesses on a new model of a dual-mobility artificial hip joint,with the ultimate objective of determining the inner liner thickness that was most suitable for this particular type of dual-mobility artificial hip joint.METHODS In this study,the size of the femoral head was compared between two diameters(28 mm and 36 mm)and eight inner liner thicknesses ranging from 5 mm to 12 mm.Using the finite element method,the contact parameters,including the maximum contact pressure and contact area,have been evaluated in light of the Hertzian contact theory.The simulation was performed statically with dissipated energy and asymmetric behavior.The types of interaction were surface-to-surface contact and normal contact behavior.RESULTS The maximum contact pressures in the inner liner(UHMWPE)at a head diameter of 28 mm and 36 mm are between 3.7-13.5 MPa and 2.7-10.4 MPa,respectively.The maximum von Mises of the inner liner,outer liner,and acetabular cup are 2.4–11.4 MPa,15.7–44.3 MPa,and 3.7–12.6 MPa,respectively,for 28 mm head.Then the maximum von Mises stresses of the 36 mm head are 1.9-8.9 MPa for the inner liner,9.9-32.8 MPa for the outer liner,and 2.6-9.9 MPa for the acetabular cup.A head with a diameter of 28 mm should have an inner liner with a thickness of 12 mm.Whereas the head diameter was 36 mm,an inner liner thickness of 8 mm was suitable.CONCLUSION The contact pressures and von Mises stresses generated during this research can potentially be exploited in estimating the wear of dual-mobility artificial hip joints in general.Contact pressure and von Mises stress reduce with an increasing head diameter and inner liner’s thickness.Present findings would become one of the references for orthopedic surgery for choosing suitable bearing geometric parameter of hip implant.
基金Project supported by the National Key Research and Development Program of China(Grant No.2022YFB3608601).
文摘The ohmic contact interface between diamond and metal is essential for the application of diamond detectors.Surface modification can significantly affect the contact performance and eliminate the interface polarization effect.However,the radiation stability of a diamond detector is also sensitive to surface modification.In this work,the influence of surface modification technology on a diamond ohmic contact under high-energy radiation was investigated.Before radiation,the specific contact resistivities(ρc)between Ti/Pt/Au-hydrogen-terminated diamond(H-diamond)and Ti/Pt/Au-oxygenterminated diamond(O-diamond)were 2.0×10^(-4)W·cm^(2) and 4.3×10^(-3)Wcm^(2),respectively.After 10 MeV electron radiation,the ρc of Ti/Pt/Au H-diamond and Ti/Pt/Au O-diamond were 5.3×10^(-3)W·cm^(2)and 9.1×10^(-3)W·cm^(2),respectively.The rates of change of ρc of H-diamond and O-diamond after radiation were 2550%and 112%,respectively.The electron radiation promotes bond reconstruction of the diamond surface,resulting in an increase in ρc.
基金the Basic Science Research Program through the National Research Foundation(NRF)of Korea funded by the Ministry of Education,Science,and Technology(No.2022R1A2C1004437)the Ministry of Science and ICT(MSIT)of Korea Government(No.2022M3J7A1062940)。
文摘In this study,the effects of stacked nanosheets and the surrounding interphase zone on the resistance of the contact region between nanosheets and the tunneling conductivity of samples are evaluated with developed equations superior to those previously reported.The contact resistance and nanocomposite conductivity are modeled by several influencing factors,including stack properties,interphase depth,tunneling size,and contact diameter.The developed model's accuracy is verified through numerous experimental measurements.To further validate the models and establish correlations between parameters,the effects of all the variables on contact resistance and nanocomposite conductivity are analyzed.Notably,the contact resistance is primarily dependent on the polymer tunnel resistivity,contact area,and tunneling size.The dimensions of the graphene nanosheets significantly influence the conductivity,which ranges from 0 S/m to90 S/m.An increased number of nanosheets in stacks and a larger gap between them enhance the nanocomposite's conductivity.Furthermore,the thicker interphase and smaller tunneling size can lead to higher sample conductivity due to their optimistic effects on the percolation threshold and network efficacy.
基金funding support from the National Nature Science Foundation of China(Grant No.52022060)the Key Laboratory of Impact and Safety Engineering(Ningbo University).
文摘The grid-based multi-velocity field technique has become increasingly popular for simulating the Material Point Method(MPM)in contact problems.However,this traditional technique has some shortcomings,such as(1)early contact and contact penetration can occur when the contact conditions are unsuitable,and(2)the method is not available for contact problems involving rigid-nonrigid materials,which can cause numerical instability.This study presents a new hybrid contact approach for the MPM to address these limitations to simulate the soil and structure interactions.The approach combines the advantages of point-point and point-segment contacts to implement contact detection,satisfying the impenetrability condition and smoothing the corner contact problem.The proposed approach is first validated through a disk test on an inclined slope.Then,several typical cases,such as granular collapse,bearing capacity,and deformation of a flexible retaining wall,are simulated to demonstrate the robustness of the proposed approach compared with FEM or analytical solutions.Finally,the proposed method is used to simulate the impact of sand flow on a deformable structure.The results show that the proposed contact approach can well describe the phenomenon of soil-structure interaction problems.
基金support provided by the National Nature Science Foundation of China (Grant Nos.52075340,51875360)Project of Science and Technology Commission of Shanghai Municipality (No.19060502300).
文摘Gears are pivotal in mechanical drives,and gear contact analysis is a typically difficult problem to solve.Emerging isogeometric analysis(IGA)methods have developed new ideas to solve this problem.In this paper,a threedimensional body parametric gear model of IGA is established,and a theoretical formula is derived to realize single-tooth contact analysis.Results were benchmarked against those obtained from commercial software utilizing the finite element analysis(FEA)method to validate the accuracy of our approach.Our findings indicate that the IGA-based contact algorithmsuccessfullymet theHertz contact test.When juxtaposed with the FEA approach,the IGAmethod demonstrated fewer node degrees of freedomand reduced computational units,all whilemaintaining comparable accuracy.Notably,the IGA method appeared to exhibit consistency in analysis accuracy irrespective of computational unit density,and also significantlymitigated non-physical oscillations in contact stress across the tooth width.This underscores the prowess of IGA in contact analysis.In conclusion,IGA emerges as a potent tool for addressing contact analysis challenges and holds significant promise for 3D gear modeling,simulation,and optimization of various mechanical components.
基金supported by the National Natural Science Foundation of China(Project No.51875370)the Natural Science Foundation of Sichuan Province(Project Nos.2022NSFSC0454,2022NSFSC1975)+2 种基金Sichuan Science and Technology Program(Project No.2023ZYD0139)the University Key Laboratory of Sichuan in Process Equipment and Control Engineering(No.GK201905)Key Laboratory of Fluid and Power Machinery,Ministry of Education(No.LTDL2020-006).
文摘Although there is currently no unified standard theoretical formula for calculating the contact stress of cylindrical gears with a circular arc tooth trace(referred to as CATT gear),a mathematical model for determining the contact stress of CATT gear is essential for studying how parameters affect its contact stress and building the contact stress limit state equation for contact stress reliability analysis.In this study,a mathematical relationship between design parameters and contact stress is formulated using the KrigingMetamodel.To enhance the model’s accuracy,we propose a new hybrid algorithm that merges the genetic algorithm with the Quantum Particle Swarm optimization algorithm,leveraging the strengths of each.Additionally,the“parental inheritance+self-learning”optimization model is used to fine-tune the KrigingMetamodel’s parameters.Following this,amathematicalmodel for calculating the contact stress of Variable Hyperbolic Circular-Arc-Tooth-Trace(VH-CATT)gears using the optimized Kriging model was developed.We then examined how different gear parameters affect the VH-CATT gears’contact stress.Our simulation results show:(1)Improvements in R2,RMSE,and RMAE.R2 rose from0.9852 to 0.9974(a 1.22%increase),nearing 1,suggesting the optimized Kriging Metamodel’s global error is minimized.Meanwhile,RMSE dropped from3.9210 to 1.6492,a decline of 57.94%.The global error of the GA-IQPSO-Kriging algorithm was also reduced,with RMAE decreasing by 58.69%from 0.1823 to 0.0753,showing the algorithm’s enhanced precision.In a comparison of ten experimental groups selected randomly,the GA-IQPSO-Kriging and FEM-based contact analysis methods were used to measure contact stress.Results revealed a maximum error of 12.11667 MPA,which represents 2.85%of the real value.(2)Several factors,including the pressure angle,tooth width,modulus,and tooth line radius,are inversely related to contact stress.The descending order of their impact on the contact stress is:tooth line radius>modulus>pressure angle>tooth width.(3)Complex interactions are noted among various parameters.Specifically,when the tooth line radius interacts with parameters such as pressure angle,tooth width,and modulus,the resulting stress contour is nonlinear,showcasing amultifaceted contour plane.However,when tooth width,modulus,and pressure angle interact,the stress contour is nearly linear,and the contour plane is simpler,indicating a weaker coupling among these factors.
基金the financial support for this study by PAPIIT-UNAM grant(IN222817)to LAS-Gthe Fran?ois Vuilleumier Fund for Neotropical Bird Research from the Neotropical Ornithological Society(NOS)awarded to OJE-C。
文摘Due to a complex geological and biotic history,the Isthmus of Tehuantepec(IT),has been long recognized as a driver for the evolutionary divergence of numerous lowland and highland taxa.Widely distributed in the lowlands of the American continent,the White-Tipped Dove(Leptotila verreauxi)is a polytypic species with 13 recognized subspecies.Four of these have been recorded in Mexico,and the distribution of three abuts at the IT,suggesting a contact zone.To estimate phylogenetic patterns,divergence times and genetic differentiation,we examined two mt DNA(ND2 and COI)and one n DNA(β-fibint 7)markers.We also used correlative ecological niche models(ENM)to assess whether ecological differences across the IT may have acted as a biogeographical boundary.We estimated paleodistributions during the Middle Holocene,Last Glacial Maximum and Last Interglacial,to evaluate the influence of climate changes on the distribution and demographic changes.Our results showed genetically distinct lineages that diverged approximately 2.5 million years ago.Climatic and ecological factors may have played a dual role in promoting differentiation,but also in the formation of a secondary contact zone in the southern IT.Our ecological niche comparisons indicated that the ecological niche of sympatric lineages at the IT are not identical,suggesting niches divergence;in addition,environmental niche models across the region indicated no abrupt biogeographic barriers,but the presence of regions with low suitability.These results suggest that genetic differentiation originated by a vicariant event probably related to environmental factors,favored the evolution of different ecological niches.Also,the absence of a biogeographic barrier but the presence of less suitable areas in the contact regions,suggest that secondary contact zones may be also maintained by climatic factors for the eastern group,but also by biotic interactions for the western group.
基金supported by the National Natural Science Foundation of China(11972077,11672035)。
文摘Detumbling operation toward a rotating target with nutation is meaningful for debris removal but challenging. In this study, a deformable end-effector is first designed based on the requirements for contacting the nutating target. A dual-arm robotic system installed with the deformable end-effectors is modeled and the movement of the end-tips is analyzed. The complex operation of the contact toward a nutating target places strict requirements on control accuracy and controller robustness. Thus, an improvement of the tracking error transformation is proposed and an adaptive sliding mode controller with prescribed performance is designed to guarantee the fast and precise motion of the effector during the contact detumbling.Finally, by employing the proposed effector and the controller,numerical simulations are carried out to verify the effectiveness and efficiency of the contact detumbling toward a nutating target.
基金Project supported by the National Natural Science Foundation of China(Nos.12262033,12272269,12062021,and 12062022)Ningxia Hui Autonomous Region Science and Technology Innovation Leading Talent Training Project of China(No.2020GKLRLX01)the Natural Science Foundation of Ningxia of China(Nos.2023AAC02003 and 2022AAC03001)。
文摘Understanding and characterizing rough contact and wavy surfaces are essential for developing effective strategies to mitigate wear,optimize lubrication,and enhance the overall performance and durability of mechanical systems.The sliding friction contact problem between a thermoelectric(TE)half-plane and a rigid solid with a periodic wavy surface is the focus of this investigation.To simplify the problem,we utilize mixed boundary conditions,leading to a set of singular integral equations(SIEs)with the Hilbert kernels.The analytical solutions for the energy flux and electric current density are obtained by the variable transform method in the context of the electric and temperature field.The contact problem for the elastic field is transformed into the second-kind SIE and solved by the Jacobi polynomials.Notably,the smoothness of the wavy contact surface ensures that there are no singularities in the surface contact stress,and ensures that it remains free at the contact edge.Based on the plane strain theory of elasticity,the analysis primarily examines the correlation between the applied load and the effective contact area.The distribution of the normal stress on the surface with or without TE loads is discussed in detail for various friction coefficients.Furthermore,the obtained results indicate that the in-plane stress decreases behind the trailing edge,while it increases ahead of the trailing edge when subjected to TE loads.
基金Projects supported by the National Natural Science Foundation of China (Grant Nos.61874084,61974119,and U21A20501)。
文摘The formation of low-resistance Ohmic contacts in Ga_(2)O_(3) is crucial for high-performance electronic devices. Conventionally, a titanium/gold(Ti/Au) electrode is rapidly annealed to achieve Ohmic contacts, resulting in mutual diffusion of atoms at the interface. However, the specific role of diffusing elements in Ohmic contact formation remains unclear.In this work, we investigate the contribution of oxygen atom diffusion to the formation of Ohmic contacts in Ga_(2)O_(3). We prepare a Ti/Au electrode on a single crystal substrate and conduct a series of electrical and structural characterizations.Using density functional theory, we construct a model of the interface and calculate the charge density, partial density of states, planar electrostatic potential energy, and I–V characteristics. Our results demonstrate that the oxygen atom diffusion effectively reduces the interface barrier, leading to low-resistance Ohmic contacts in Ga_(2)O_(3). These findings provide valuable insights into the underlying mechanisms of Ohmic contact formation and highlight the importance of considering the oxygen atom diffusion in the design of Ga_(2)O_(3)-based electronic devices.
文摘In this paper,a frictional contact problem between an electro-elastic body and an electrically conductive foundation is studied.The contact is modeled by normal compliance with finite penetration and a version of Coulomb’s law of dry friction in which the coefficient of friction depends on the slip.In addition,the effects of the electrical conductivity of the foundation are taken into account.This model leads to a coupled system of the quasi-variational inequality of the elliptic type for the displacement and the nonlinear variational equation for the electric potential.The existence of a weak solution is proved by using an abstract result for elliptic variational inequalities and a fixed point argument.Then,a finite element approximation of the problem is presented.Under some regularity conditions,an optimal order error estimate of the approximate solution is derived.Finally,a successive iteration technique is used to solve the problem numerically and a convergence result is established.
基金the funding support from the National Natural Science Foundation of China(22222902,22209062)the Natural Science Foundation of Jiangsu Province(BK20200047)+2 种基金the Natural Science Foundation of the Jiangsu Higher Education Institutions of China(22KJB150004)the Youth Talent Promotion Project of Jiangsu Association for Science and Technology of China(JSTJ-2022-023)Undergraduate Innovation and Entrepreneurship Training Program(202310320066Z)。
文摘The utilization of solid-state electrolytes(SSEs)presents a promising solution to the issues of safety concern and shuttle effect in Li–S batteries,which has garnered significant interest recently.However,the high interfacial impedances existing between the SSEs and the electrodes(both lithium anodes and sulfur cathodes)hinder the charge transfer and intensify the uneven deposition of lithium,which ultimately result in insufficient capacity utilization and poor cycling stability.Hence,the reduction of interfacial resistance between SSEs and electrodes is of paramount importance in the pursuit of efficacious solid-state batteries.In this review,we focus on the experimental strategies employed to enhance the interfacial contact between SSEs and electrodes,and summarize recent progresses of their applications in solidstate Li–S batteries.Moreover,the challenges and perspectives of rational interfacial design in practical solid-state Li–S batteries are outlined as well.We expect that this review will provide new insights into the further technique development and practical applications of solid-state lithium batteries.
基金China National Railway Group Science and Technology Program(N2022J009)China Academy of Railway Sciences Group Co.,Ltd.Program(2021YJ036).
文摘Purpose-Under the high-speed operating conditions,the effects of wheelset elastic deformation on the wheel rail dynamic forces will become more notable compared to the low-speed condition.In order to meet different analysis requirements and selecting appropriate models to analyzing the wheel rail interaction,it is crucial to understand the influence of wheelset flexibility on the wheel-rail dynamics under different speeds and track excitations condition.Design/methodology/approach-The wheel rail contact points solving method and vehicle dynamics equations considering wheelset flexibility in the trajectory body coordinate system were investigated in this paper.As for the wheel-rail contact forces,which is a particular force element in vehicle multibody system,a method for calculating the Jacobian matrix of the wheel-rail contact force is proposed to better couple the wheel-rail contact force calculation with the vehicle dynamics response calculation.Based on the flexible wheelset modeling approach in this paper,two vehicle dynamic models considering the wheelset as both elastic and rigid bodies are established,two kinds of track excitations,namely normal measured track irregularities and short-wave irregularities are used,wheel-rail geometric contact characteristic and wheel-rail contact forces in both time and frequency domains are compared with the two models in order to study the influence of flexible wheelset rotation effect on wheel rail contact force.Findings-Under normal track irregularity excitations,the amplitudes of vertical,longitudinal and lateral forces computed by the flexible wheelset model are smaller than those of the rigid wheelset model,and the virtual penetration and equivalent contact patch are also slightly smaller.For the flexible wheelset model,the wheel rail longitudinal and lateral creepages will also decrease.The higher the vehicle speed,the larger the differences in wheel-rail forces computed by the flexible and rigid wheelset model.Under track short-wave irregularity excitations,the vertical force amplitude computed by the flexible wheelset is also smaller than that of the rigid wheelset.However,unlike the excitation case of measured track irregularity,under short-wave excitations,for the speed within the range of 200 to 350 km/h,the difference in the amplitude of the vertical force between the flexible and rigid wheelset models gradually decreases as the speed increase.This is partly due to the contribution of wheelset's elastic vibration under short-wave excitations.For low-frequency wheel-rail force analysis problems at speeds of 350 km/h and above,as well as high-frequency wheel-rail interaction analysis problems under various speed conditions,the flexible wheelset model will give results agrees better with the reality.Originality/value-This study provides reference for the modeling method of the flexible wheelset and the coupling method of wheel-rail contact force to the vehicle multibody dynamics system.Furthermore,by comparative research,the influence of wheelset flexibility and rotation on wheel-rail dynamic behavior are obtained,which is useful to the application scope of rigid and flexible wheelset models.
基金supported by Basic Research Funds for Central Universities(3122019189).
文摘Aero engine seal coatings can effectively improve the air tightness of aircraft engines and increase fuel efficiency.However,due to the frictional forces between the blades and the coating,the coating often flakes off,resulting in damage to the blades and causing eco-nomic losses.Therefore,it is necessary to analyze the friction between the blades and the coating.In this paper,three ceramic-based high-temperature seal coatings with different polyphenylene ester contents and a pure Yttria-stabilised zirconia coating were prepared by atmo-spheric plasma spraying(APS).The hardness and modulus of elasticity of the coated surfaces were obtained by hardness and modulus of elasticity tests,and the coatings were subjected to high-speed touch abrasion tests.The Hertzian contact model was used to calculate the maximum normal contact load on the coating during the process.The test values were compared with the theoretical values and it was found that the calculated values were always greater than the test values.In order to make the Hertzian contact model more accurate in calculating the touching and abrasion forces,the contact coefficients in the Hertzian contact model were optimized.Substituting the optimized coeffi-cients into the Hertzian contact model,the results show that the calculated results after optimizing the coefficients are much closer to the test values,with deviations from the test values ranging from 1%to 38%.
文摘Objective: To explore the pre-treatment and efficacy analysis of comprehensive anti-inflammatory treatment for lymphedema in patients with irritating contact dermatitis. Method: Convenience sampling method was used to observe the skin of 160 patients with upper limb lymphedema admitted to the lymphedema outpatient department of our hospital. They were divided into an observation group (80 cases) and a control group (80 cases), and both groups received a course of comprehensive anti-inflammatory treatment (20 treatments). The control group received routine skin care;On the basis of the control group, the observation group received pre-treatment of the affected limb skin: Laofuzi herbal ointment was applied externally to the prone areas of irritating contact dermatitis (such as the upper arm, inner forearm, and cubital fossa). Result: The incidence of irritating contact dermatitis in the observation group was significantly lower than that in the control group (P 0.05). Patients in the observation group felt significantly better in terms of comfort, skin moisture, and itching relief after being wrapped with low elasticity bandages than those in the control group (P Conclusion: Preventive treatment can effectively reduce the incidence of irritating contact dermatitis, prolong the time of stress treatment, thereby increasing efficacy and improving patient compliance.
文摘Objective:Based on the theory of“Knowledge,Attitude,Practice,”health education was carried out for close contact with tuberculosis(TB)at a university in Beijing,and its impact on the students’awareness of TB was studied.This study could provide a reference for effective health education interventions among close contacts of TB in undergraduates.Methods:102 undergraduates who had close contact with one confirmed case of pulmonary TB in April 2021 at a university were randomly divided into a control group and an intervention group.The intervention group was given the“Knowledge,Attitude,Practice”health education intervention by professionally trained doctors,and were asked to complete a self-designed TB-related questionnaire before and after the intervention.Both groups performed the Tuberculin Skin Test(TST)and chest X-ray(CR)examination.Results:The rate of the TST test was 18.6%,and CR examination showed 0 cases of pulmonary TB.The survey results showed that the TB awareness rate(96.1%,49/51)in the intervention group was significantly higher than that of the control group(51.0%,26/51),and the differences in awareness rate between the two groups were statistically significant(P<0.05).Regarding the attitude/skills toward TB,the prevalence rate of tuberculosis-related attitude/behavior in the intervention group(94.1%,47/51)was significantly higher than that of the control group(60.8%,31/51),and the differences between the two groups were statistically significant(P<0.05).Conclusion:Both self-controlled and parallel-controlled studies showed that the health education intervention of“Knowledge,Attitude,Practice”improved the awareness of TB among close contacts of TB in undergraduates.