The highly dispersed supported ruthenium-yttrium (Ru-Y) bimetallic catalysts were prepared by impregnation method and their catalytic performance for hydrogenation of ester was fully investigated. The catalyst was cha...The highly dispersed supported ruthenium-yttrium (Ru-Y) bimetallic catalysts were prepared by impregnation method and their catalytic performance for hydrogenation of ester was fully investigated. The catalyst was characterized by X-ray diffraction and field emission scanning electron microscopy. The results show that the average particle diameter of the bimetallic crystallites was less than 10 nm. The effects of the reaction temperature, the hydrogen pressure, the amount of catalyst and the proportion of yttrium in catalyst on the hydrogenation of ester were studied. The experimental results show that the introduction of yttrium not only changed the chemical and textural properties of ruthenium-based catalyst but also controlled the formation of Ru-Y alloy. The Ru-Y catalyst (Ru-2%Y/TiO2) exhibited high catalytic activity and good selectivity towards the higher alcohols. Under optimal reaction conditions of 240°C and 5 MPa hydrogen pressure, the conversion of palm oil esters was above 93.4% while the selectivity towards alcohol was above 99.0%.展开更多
New thermoplastic norbornene polymers containing ester groups were prepared byvinylic polymerization of norbornene-carboxylic acid esters by Pd(Ⅱ)-based catalysts. Themonomers were obtained by Diels-Alder reaction of...New thermoplastic norbornene polymers containing ester groups were prepared byvinylic polymerization of norbornene-carboxylic acid esters by Pd(Ⅱ)-based catalysts. Themonomers were obtained by Diels-Alder reaction of cyclopentadiene with acrylic acid esters(methyl and butyl) as mixtures of endo/exo (ratio 40/60)-isomers and were converted topolymers in 60%～70% conversion. The endo-isomer was less reactive than the exo-isomer.To obtain higher molecular weight the more reactive pure exo-isomer was prepared andpolymerized with the Pd (Ⅱ)-catalysts, tetrakis (acetonitrile) Pd (Ⅱ) bis (tetrafluoroborate)and (η3-allyl)Pd(Ⅱ)SbF6, in high conversion. These polymers showed high glass transitiontemperatures, high transparency and good solubility in common solvents.展开更多
This article presents a novel catalytic method by combining phase-transfer catalyst, benzyltriethylammonium chloride, with 4-dimethylaminopyridine for the syntheses of glycosyl esters from substituted phenoxyaeetie ac...This article presents a novel catalytic method by combining phase-transfer catalyst, benzyltriethylammonium chloride, with 4-dimethylaminopyridine for the syntheses of glycosyl esters from substituted phenoxyaeetie acids and the peracetate of α-D-l-bromosugars to produee eight novel β-glyeosyl esters in high yields. The struetures of the syn-thesized eompounds were established by IR, MS, ^1H NMR, and ^13C NMR speetra and elemental analyses.展开更多
Biolubricant was synthesized from Cameroon palm kernel oil (PKO) by double transesterification, producing methyl esters in the first stage which were then transesterified with trimethylolpropane (TMP) to give the PKO ...Biolubricant was synthesized from Cameroon palm kernel oil (PKO) by double transesterification, producing methyl esters in the first stage which were then transesterified with trimethylolpropane (TMP) to give the PKO biolubricant in the presence of a base catalyst obtained from plantain peelings (municipal waste). The yields from both catalysts were significantly similar (48% for the locally produced and 51% for the conventional) showing that the locally produced catalyst could be valorized. The synthesized biolubricant was characterized by measuring its physical and chemical properties. The specific gravity of 1.2, ASTM color of 1.5, cloud point of 0°C, pour point of -9°C, viscosities at 40°C of 509.80 cSt and at 100°C of 30.80 cSt, viscosity index of 120, flash point greater than 210°C and a fire point greater than 220°C were obtained. This synthesized biolubricant was found to be comparable to commercial T-46 petroleum lubricant sample produced industrially from mineral sources. We have therefore used local materials to produce a biolubricant using a cheap base catalyst produced from municipal waste.展开更多
Furfural is directly converted to levulinate esters（isopropyl levulinate and furan-2-ylmethyl-levulinate） as potential biofuel feedstocks, through a combined catalytic strategy. Nb;O;-ZrO;mixed oxide microspheres ar...Furfural is directly converted to levulinate esters（isopropyl levulinate and furan-2-ylmethyl-levulinate） as potential biofuel feedstocks, through a combined catalytic strategy. Nb;O;-ZrO;mixed oxide microspheres are used as bifunctional catalysts for hydrogen-transfer hydrogenation and acid-catalyzed alcoholysis in isopropanol. Bifunctional catalysts improve sustainability of furfural conversion through process intensification. Hydrogen transfer hydrogenation from isopropanol avoids dangerous hydrogen gas, and abates process and environmental costs. Isopropyl levulinate and furan-2-ylmethyl-levulinate are the main products that can be applied as blending components in biodiesel or hydrocarbon fuels.展开更多
This article reports a high yielding technique of synthesizing zirconium dodecyl sulphate (“ZDS”) for in situ transesterification of Nannochloropsis occulata and Chlorella vulgaris for fatty acid methyl ester (FAME)...This article reports a high yielding technique of synthesizing zirconium dodecyl sulphate (“ZDS”) for in situ transesterification of Nannochloropsis occulata and Chlorella vulgaris for fatty acid methyl ester (FAME) production. ZDS produced a significantly higher FAME yield in N. occulata than in C. vulgaris (p = 0.008). The varying performance of ZDS in the two species could be due to their different cell wall chemistries. Sodium dodecyl sulphate (SDS) in H2SO4 for FAME enhancement from the two species was also studied. Treatment with SDS in H2SO4 increased the FAME production rate in both species. Residual protein content after the in situ transesterification in C. vulgaris and N. occulata reduced respectively by 6.5% and 10%. The carbohydrate content was reduced by 71% in C. vulgaris and 65% in N. occulata. The water tolerance of the process when using H2SO4, with or without SDS, was evaluated by hydrating the two species with 10% - 30% distilled water (w/w dry algae). The FAME concentration began to diminish only at 30% water content in both species. Furthermore, the presence of a small amount of water in the biomass or methanol increased the lipid extraction efficiency, improving the FAME yield, rather than inhibiting the reaction.展开更多
Native amino-directed palladium-catalyzed C(sp^(3))-H activation/functionalization has been developed for modification ofα-amino acids and peptides.Herein a palladium(Ⅱ)-catalyzed C(sp^(2))-H arylation ofα-amino-β...Native amino-directed palladium-catalyzed C(sp^(3))-H activation/functionalization has been developed for modification ofα-amino acids and peptides.Herein a palladium(Ⅱ)-catalyzed C(sp^(2))-H arylation ofα-amino-β-aryl esters has been disclosed,using the native amino as the directing group.A variety of chiralα-amino-β-aryl esters can be functionalized to give the corresponding ortho-substituted mono-and di-arylated products.展开更多
文摘The highly dispersed supported ruthenium-yttrium (Ru-Y) bimetallic catalysts were prepared by impregnation method and their catalytic performance for hydrogenation of ester was fully investigated. The catalyst was characterized by X-ray diffraction and field emission scanning electron microscopy. The results show that the average particle diameter of the bimetallic crystallites was less than 10 nm. The effects of the reaction temperature, the hydrogen pressure, the amount of catalyst and the proportion of yttrium in catalyst on the hydrogenation of ester were studied. The experimental results show that the introduction of yttrium not only changed the chemical and textural properties of ruthenium-based catalyst but also controlled the formation of Ru-Y alloy. The Ru-Y catalyst (Ru-2%Y/TiO2) exhibited high catalytic activity and good selectivity towards the higher alcohols. Under optimal reaction conditions of 240°C and 5 MPa hydrogen pressure, the conversion of palm oil esters was above 93.4% while the selectivity towards alcohol was above 99.0%.
文摘New thermoplastic norbornene polymers containing ester groups were prepared byvinylic polymerization of norbornene-carboxylic acid esters by Pd(Ⅱ)-based catalysts. Themonomers were obtained by Diels-Alder reaction of cyclopentadiene with acrylic acid esters(methyl and butyl) as mixtures of endo/exo (ratio 40/60)-isomers and were converted topolymers in 60%～70% conversion. The endo-isomer was less reactive than the exo-isomer.To obtain higher molecular weight the more reactive pure exo-isomer was prepared andpolymerized with the Pd (Ⅱ)-catalysts, tetrakis (acetonitrile) Pd (Ⅱ) bis (tetrafluoroborate)and (η3-allyl)Pd(Ⅱ)SbF6, in high conversion. These polymers showed high glass transitiontemperatures, high transparency and good solubility in common solvents.
基金Supported by the National Natural Science Foundation of China(No.20674023).
文摘This article presents a novel catalytic method by combining phase-transfer catalyst, benzyltriethylammonium chloride, with 4-dimethylaminopyridine for the syntheses of glycosyl esters from substituted phenoxyaeetie acids and the peracetate of α-D-l-bromosugars to produee eight novel β-glyeosyl esters in high yields. The struetures of the syn-thesized eompounds were established by IR, MS, ^1H NMR, and ^13C NMR speetra and elemental analyses.
文摘Biolubricant was synthesized from Cameroon palm kernel oil (PKO) by double transesterification, producing methyl esters in the first stage which were then transesterified with trimethylolpropane (TMP) to give the PKO biolubricant in the presence of a base catalyst obtained from plantain peelings (municipal waste). The yields from both catalysts were significantly similar (48% for the locally produced and 51% for the conventional) showing that the locally produced catalyst could be valorized. The synthesized biolubricant was characterized by measuring its physical and chemical properties. The specific gravity of 1.2, ASTM color of 1.5, cloud point of 0°C, pour point of -9°C, viscosities at 40°C of 509.80 cSt and at 100°C of 30.80 cSt, viscosity index of 120, flash point greater than 210°C and a fire point greater than 220°C were obtained. This synthesized biolubricant was found to be comparable to commercial T-46 petroleum lubricant sample produced industrially from mineral sources. We have therefore used local materials to produce a biolubricant using a cheap base catalyst produced from municipal waste.
基金supported by the National Natural Science Foundation of China (21403248, 21174148, 21101161, and 21304101)
文摘Furfural is directly converted to levulinate esters（isopropyl levulinate and furan-2-ylmethyl-levulinate） as potential biofuel feedstocks, through a combined catalytic strategy. Nb;O;-ZrO;mixed oxide microspheres are used as bifunctional catalysts for hydrogen-transfer hydrogenation and acid-catalyzed alcoholysis in isopropanol. Bifunctional catalysts improve sustainability of furfural conversion through process intensification. Hydrogen transfer hydrogenation from isopropanol avoids dangerous hydrogen gas, and abates process and environmental costs. Isopropyl levulinate and furan-2-ylmethyl-levulinate are the main products that can be applied as blending components in biodiesel or hydrocarbon fuels.
文摘This article reports a high yielding technique of synthesizing zirconium dodecyl sulphate (“ZDS”) for in situ transesterification of Nannochloropsis occulata and Chlorella vulgaris for fatty acid methyl ester (FAME) production. ZDS produced a significantly higher FAME yield in N. occulata than in C. vulgaris (p = 0.008). The varying performance of ZDS in the two species could be due to their different cell wall chemistries. Sodium dodecyl sulphate (SDS) in H2SO4 for FAME enhancement from the two species was also studied. Treatment with SDS in H2SO4 increased the FAME production rate in both species. Residual protein content after the in situ transesterification in C. vulgaris and N. occulata reduced respectively by 6.5% and 10%. The carbohydrate content was reduced by 71% in C. vulgaris and 65% in N. occulata. The water tolerance of the process when using H2SO4, with or without SDS, was evaluated by hydrating the two species with 10% - 30% distilled water (w/w dry algae). The FAME concentration began to diminish only at 30% water content in both species. Furthermore, the presence of a small amount of water in the biomass or methanol increased the lipid extraction efficiency, improving the FAME yield, rather than inhibiting the reaction.
基金supported by the National Key Research and Development Program of China(No.2018YFA0704502)the National Natural Science Foundation of China(Nos.21871261,21931011)Fujian Science&Technology Innovation Laboratory for Optoelectronic Information of China(No.2021ZZ105).
文摘Native amino-directed palladium-catalyzed C(sp^(3))-H activation/functionalization has been developed for modification ofα-amino acids and peptides.Herein a palladium(Ⅱ)-catalyzed C(sp^(2))-H arylation ofα-amino-β-aryl esters has been disclosed,using the native amino as the directing group.A variety of chiralα-amino-β-aryl esters can be functionalized to give the corresponding ortho-substituted mono-and di-arylated products.
