Influence of railway wheel tread damage on wheel-rail impact loads and the durability of wheelsets

Dynamic wheel-rail contact forces induced by a severe form of wheel tread damage have been measured by a wheel impact load detector during full-scale field tests at different vehicle speeds.Based on laser scanning,the measured three-dimensional damage geometry is employed in simulations of dynamic vehicle-track interaction to calibrate and verify a simulation model.The relation between the magnitude of the impact load and various operational parameters,such as vehicle speed,lateral position of wheel-rail contact,track stiffness and position of impact within a sleeper bay,is investigated.The calibrated model is later employed in simulations featuring other forms of tread damage;their effects on impact load and subsequent fatigue impact on bearings,wheel webs and subsurface initiated rolling contact fatigue of the wheel tread are assessed.The results quantify the effects of wheel tread defects and are valuable in a shift towards condition-based maintenance of running gear,and for general assessment of the severity of different types of railway wheel tread damage.

Research on the influence of flexible wheelset rotation effect on wheel rail contact force

Purpose-Under the high-speed operating conditions,the effects of wheelset elastic deformation on the wheel rail dynamic forces will become more notable compared to the low-speed condition.In order to meet different analysis requirements and selecting appropriate models to analyzing the wheel rail interaction,it is crucial to understand the influence of wheelset flexibility on the wheel-rail dynamics under different speeds and track excitations condition.Design/methodology/approach-The wheel rail contact points solving method and vehicle dynamics equations considering wheelset flexibility in the trajectory body coordinate system were investigated in this paper.As for the wheel-rail contact forces,which is a particular force element in vehicle multibody system,a method for calculating the Jacobian matrix of the wheel-rail contact force is proposed to better couple the wheel-rail contact force calculation with the vehicle dynamics response calculation.Based on the flexible wheelset modeling approach in this paper,two vehicle dynamic models considering the wheelset as both elastic and rigid bodies are established,two kinds of track excitations,namely normal measured track irregularities and short-wave irregularities are used,wheel-rail geometric contact characteristic and wheel-rail contact forces in both time and frequency domains are compared with the two models in order to study the influence of flexible wheelset rotation effect on wheel rail contact force.Findings-Under normal track irregularity excitations,the amplitudes of vertical,longitudinal and lateral forces computed by the flexible wheelset model are smaller than those of the rigid wheelset model,and the virtual penetration and equivalent contact patch are also slightly smaller.For the flexible wheelset model,the wheel rail longitudinal and lateral creepages will also decrease.The higher the vehicle speed,the larger the differences in wheel-rail forces computed by the flexible and rigid wheelset model.Under track short-wave irregularity excitations,the vertical force amplitude computed by the flexible wheelset is also smaller than that of the rigid wheelset.However,unlike the excitation case of measured track irregularity,under short-wave excitations,for the speed within the range of 200 to 350 km/h,the difference in the amplitude of the vertical force between the flexible and rigid wheelset models gradually decreases as the speed increase.This is partly due to the contribution of wheelset's elastic vibration under short-wave excitations.For low-frequency wheel-rail force analysis problems at speeds of 350 km/h and above,as well as high-frequency wheel-rail interaction analysis problems under various speed conditions,the flexible wheelset model will give results agrees better with the reality.Originality/value-This study provides reference for the modeling method of the flexible wheelset and the coupling method of wheel-rail contact force to the vehicle multibody dynamics system.Furthermore,by comparative research,the influence of wheelset flexibility and rotation on wheel-rail dynamic behavior are obtained,which is useful to the application scope of rigid and flexible wheelset models.

Modeling and Simulation on the Underwater Trajectory of Non-Powered Vehicle Discharged from the Broadside

In order to study the underwater trajectory of the non-powered vehicle discharged from the broadside of the underwater platform,the simulation on the ascent process of non-powered vehicle was realized based on the mathematical model including the movement of the vehicle on the slope plate and in the seawater,the air chamber underwater working process etc. The simulation results show that the outlet speed and attitude of the vehicle meet the requirements of missile launching,the non-powered vehicle discharged from the broadside of the underwater platform is feasible. The simulation results with varying parameters show that the negative buoyancy of the vehicle imposes great impacts on the security of its discharge and the floating process,and the vehicle discharge depth is proportional to the floating time. The models and simulation result can be used in further research on the broadside discharging technology of the underwater platform.

FPGA Implementation of Extended Kalman Filter for Parameters Estimation of Railway Wheelset

It is necessary to know the status of adhesion conditions between wheel and rail for efficient accelerating and decelerating of railroad vehicle.The proper estimation of adhesion conditions and their real-time implementation is considered a challenge for scholars.In this paper,the development of simulation model of extended Kalman filter(EKF)in MATLAB/Simulink is presented to estimate various railway wheelset parameters in different contact conditions of track.Due to concurrent in nature,the Xilinx®System-on-Chip Zynq Field Programmable Gate Array(FPGA)device is chosen to check the onboard estimation ofwheel-rail interaction parameters by using the National Instruments(NI)myRIO®development board.The NImyRIO®development board is flexible to deal with nonlinearities,uncertain changes,and fastchanging dynamics in real-time occurring in wheel-rail contact conditions during vehicle operation.The simulated dataset of the railway nonlinear wheelsetmodel is tested on FPGA-based EKF with different track conditions and with accelerating and decelerating operations of the vehicle.The proposed model-based estimation of railway wheelset parameters is synthesized on FPGA and its simulation is carried out for functional verification on FPGA.The obtained simulation results are aligned with the simulation results obtained through MATLAB.To the best of our knowledge,this is the first time study that presents the implementation of a model-based estimation of railway wheelset parameters on FPGA and its functional verification.The functional behavior of the FPGA-based estimator shows that these results are the addition of current knowledge in the field of the railway.

Influence of unsupported sleepers on the dynamic stability of ballasted bed based on wheelset impact tests

The unsupported sleeper can change the load characteristics of ballast particles and thus affect the dynamic stability of a ballasted bed.In this work,a laboratory test was constructed on a ballasted track containing unsupported sleepers.The ballasted track was excited by a wheelset,and the influence of unsupported sleepers on the dynamic stability of a ballasted bed was studied.The results show that the main frequency of the sleeper vibration appeared at 670 Hz,and the first-order rigid vibration mode at the frequency of 101 Hz had a significant effect on the condition without the unsupported sleeper.When the sleepers were continuously unsupported,the vibration damping effect of ballasted bed within the frequency range of 0–450 Hz was better than that at higher frequencies.Within the frequency range of 70–250 Hz,the vibration damping effect of the ballasted bed with unsupported sleepers was better than that without the unsupported sleeper.Owing to the excitation from the wheelset impact,the lateral resistance of the ballasted bed with unsupported sleepers whose hanging heights were 30,60,and 90 mm increased by 37.43%,12.25%,and 18.23%,respectively,while the lateral resistance of the ballasted bed without the unsupported sleeper remained basically unchanged.The unsupported sleeper could increase the difference in the quality of the ballasted bed between two adjacent sleepers.In addition,test results show that the hanging height of the unsupported sleeper had little effect on the lateral resistance of a ballasted bed without external excitation,but had an obvious effect on the rate of change of the lateral resistance of a ballasted bed and the acceleration amplitude of the sleeper vibration under the wheelset impact.

Research on hunting stability and bifurcation characteristics of nonlinear stochastic wheelset system

A stochastic wheelset model with a nonlinear wheel-rail contact relationship is established to investigate the stochastic stability and stochastic bifurcation of the wheelset system with the consideration of the stochastic parametric excitations of equivalent conicity and suspension stiffness.The wheelset is systematized into a onedimensional(1D)diffusion process by using the stochastic average method,the behavior of the singular boundary is analyzed to determine the hunting stability condition of the wheelset system,and the critical speed of stochastic bifurcation is obtained.The stationary probability density and joint probability density are derived theoretically.Based on the topological structure change of the probability density function,the stochastic Hopf bifurcation form and bifurcation condition of the wheelset system are determined.The effects of stochastic factors on the hunting stability and bifurcation characteristics are analyzed,and the simulation results verify the correctness of the theoretical analysis.The results reveal that the boundary behavior of the diffusion process determines the hunting stability of the stochastic wheelset system,and the left boundary characteristic value cL=1 is the critical state of hunting stability.Besides,stochastic D-bifurcation and P-bifurcation will appear in the wheelset system,and the critical speeds of the two kinds of stochastic bifurcation decrease with the increase in the stochastic parametric excitation intensity.

列车轮对简化模型重力刚度与滚动半径的计算方法

在建立列车轮对简化模型动力学方程中,如果假设侧移和摇头角是微小量,及质心高度保持不变,可以较简便地求出重力刚度和滚动半径等量的近似表达式。本文用几何方法给出了轮对质心高度和滚动半径与侧向位移之间的函数关系,从而可以获得这些量的解析表达式;另外还通过运动学方法,证明了重力刚度和滚动半径等量的简便计算方法是正确的。

采用弹性车轮的独立轮对有轨电车曲线通过动力学性能研究

采用动力学仿真软件SIMPACK,利用离散刚度阻尼单元模拟弹性车轮的弹性变形特性,建立了三编组现代有轨电车列车动力学计算模型,对比分析了曲线半径R400 m线路条件下弹性车轮在时域和频域内的减振性能,讨论了50~400 m不同半径的曲线线路条件下不同轮对形式的弹性车轮对中间拖车曲线通过性能的影响。计算结果显示:弹性车轮能够减小20~40 Hz、50~70 Hz和180~300 Hz频率范围内的车体垂向振动以及20~550 Hz范围内的车体横向振动。从轮对横移量和轮重减载率看,曲线半径R200 m左右是弹性车轮传统轮对和弹性车轮独立轮对曲线导向能力的分界点;从轮轨横向蠕滑率、轮对摇头角、脱轨系数和轮轴横向力看,曲线半径R100 m左右是分界点。

变转速工况下基于快速谱平均峭度图的列车轮对轴承故障诊断

由于受到轮轨激励的干扰,轮对轴承故障特征易被背景噪声所淹没,且在变转速模式下故障特征具有时变性,进一步加剧了提取难度。为此,提出一种基于快速谱平均峭度图的列车轮对轴承故障特征提取方法。根据频谱趋势将频谱划分为若干子带,采用Meyer小波构造带通滤波器,计算每个窄带滤波信号的平均峭度并构造快速谱平均峭度图;选取最优频带进行解调,消除背景噪声的影响;通过相位函数对滤波信号进行迭代广义解调,解决时变故障冲击间隔带来的频谱模糊问题。仿真和试验分析结果表明所提方法有效克服了强背景噪声和时变故障特征的干扰,为变转速工况下轮对轴承故障特征提取提供了新的解决策略。

高铁轮对高精度测量系统设计与实现

针对国内轮对尺寸测量手段落后、精度不高、测量效率以及自动化水平低的问题,设计并实现了一种接触式轮对外形尺寸自动化测量系统。该系统利用接触式触发测头以及位移传感器实现了轮对外形尺寸自动化测量,并通过相对测量原理以及温度补偿算法实现了包括内侧距离、轮位、轴颈直径等长度尺寸及径向尺寸的高精度测量。通过在高铁轮对生产组装现场实际试验及试用验证,该系统的测量结果具有高精度和高一致性,满足高铁轮对各个尺寸的测量精度要求。

VMD引导的轮对与轴承复合故障诊断方法

针对列车轮对轴承系统复合故障难以辨识与诊断问题,提出一种变分模态分解(variational mode decomposition,VMD)引导的多故障特征提取匹配方法.首先,为避免预定义模式数在运行过程中对先验知识依赖从而对诊断结果造成影响,对原始轴箱振动数据进行逐阶VMD分解,模式数为2~N;其次,对VMD分解获取的本征模态函数(VMD intrinsic mode functions,VIMF)进行相关峭度计算,提取相关峭度最大的VIMF;然后,将相关峭度最大的VIMF进行平方包络分析,提取故障特征频率;最后,将所提方法与快速峭度谱、相关峭度谱方法进行对比.仿真信号和试验数据分析表明:所提方法完全规避了VMD模型中关键参数K的选择问题,可以准确、有效地分别提取出轮对和轴承的故障特征;与快速谱峭度与相关谱峭度方法相比,获取的故障特征谐波分量在数量和信噪比上均具有明显优势.

轨道交通车辆轮对表面处理技术专利分析

随着国家铁道运输和轨道交通行业的快速发展,四川省以培育轨道交通车辆装备产业集群为目标。轮对作为轨道交通车辆的关键装备,在服役中表面极易产生损伤和失效,通过不同表面处理技术可改善其表面性能。本文以产业技术应用和专利视角,分析国内外轨道交通车辆轮对用表面处理技术专利,得到该领域的国内外发展状况、趋势和方向,为四川省轨道交通装备相关技术人员在轮对表面处理技术领域研究、决策提供技术支撑和客观依据。

城轨列车轮对磨耗预测计算方法研究

为研究城轨列车轮对磨耗预测的计算方法,实现轮对尺寸预测,以国内某地铁线路轮对尺寸实测数据为研究对象,分别提取轮径、轮缘厚度、轮径差及车轮位置四项特征参数,并分析特征参数对轮对磨耗率的影响规律,利用XGBoost算法建立轮径、轮缘厚度磨耗率的仿真模型,模型的测试结果显示平均计算误差在允许范围以内,表明本模型具备良好的磨耗率仿真计算效果。在此基础上,进一步建立轮径、轮缘厚度的预测模型,利用某节车半年实测数据对预测模型进行实用性验证,对比结果表明,基于XGBoost的轮对尺寸磨耗预测模型对走行里程8万公里内的轮径值、轮缘厚度值预测的平均误差分别不超过0.175mm、0.3125mm,具有较好的预测效果。

基于机器视觉的轮对磁粉探伤裂纹检测方法研究

为实现火车轮对荧光磁粉探伤裂纹的自动检测,提出一种基于机器视觉的裂纹识别和测量算法。基于工业相机分区采集的轮对荧光磁粉探伤图像,首先通过G通道分离处理、G通道阈值处理和高斯滤波处理等操作,降低图像噪点,提高裂纹特征对比度;然后在图像二值化和形态学处理初步提取目标区域的基础上,提出基于连通域的裂纹特征分割算法,进一步精确提取裂纹目标,并根据连通域信息完成裂纹分类和识别;最后,采用裂纹分割图像骨架细化拟合曲线的方法进行裂纹长度测量。实验表明,提出的方法可以有效精准地对轮对裂纹进行检测,查全率为98.56%,查准率为91.12%,识别速度为每幅48.5 ms。

基于GA-LSTM的轮轨力连续测量研究

为降低连续测力轮对在横向力和垂向力解耦过程中产生的系统误差,基于神经网络的原理,提出一种基于GA-LSTM的轮轨力连续测量方法。研究表明:相比于GB/T 5599—2019中的轮轨力测量方法,本轮轨力连续测量方法具有更高的精度和效率。将本轮轨力连续测量方法运用于国内某运营地铁线路的轮轨力信号实测,测试数据验证了其有效性。

基于张量分解的地铁车轮健康指数构建

地铁在运行过程中,车轮踏面、轮缘与轨道持续磨损会导致车轮性能退化。对车轮退化过程中的不同状态进行识别和评估是车辆故障预测与健康管理的关键环节。近年来,基于振动信号和机器学习的地铁车轮退化状态智能识别技术在降低人工依赖、优化镟修策略方面作用显著。但由于在实际运行过程中,地铁轮对通常受载荷、路况等因素影响,振动信号易受强噪声干扰,导致退化趋势不显著,难以直接识别其状态变化。为解决这一问题,文章提出一种基于张量重构的健康指标构建方法。该方法首先基于张量分解可有效挖掘信号高维本质信息的优点,利用张量Tucker分解获得原始信号的核心张量;其次,采用张量重构和Savitzky-Golay滤波方法对信号进行降噪处理;最后,在此基础上,利用深度自动编码器网络提取深度退化特征,建立车轮退化过程的健康指标。依托北京地铁某线路实际运行的车轮振动信号数据所进行的实验结果表明,采用该方法构建的健康指标具有良好的趋势性和单调性,能够准确描述轮对整个退化过程,所得到的异常预警位置与轮径值磨损变化和实际镟修记录准确对应。该方法的提出为地铁轮对健康管理提供一种智能化的解决方案,具有良好的实用价值。

柔性轮对高速列车通过道岔的动力学响应

为研究高速列车在柔性轮对条件下通过道岔时的动力响应,采用刚柔耦合动力学仿真方法,基于CRH380高速列车模型建立柔性轮对结构条件下的车辆—道岔刚柔耦合动力学模型。以柔性轮对高速列车模型为研究对象,通过18号高速道岔,分析轮对柔性与全刚体结构条件下的车辆模型的安全性、轮轨动态相互作用、车体振动加速度及轮轨接触位置分布指标。仿真结果表明,柔性轮对高速列车模型对车辆的轮轨动态相互作用影响较大,对安全性、车体振动加速度及轮轨接触位置分布等动力学指标影响较小。

Research on the strain gauge mounting scheme of track wheel force measurement system based on high-speed wheel/rail relationship test rig

Purpose-This paper aims to analyze the stress and strain distribution on the track wheel web surface and study the optimal strain gauge location for force measurement system of the track wheel.Design/methodology/approach-Finite element method was employed to analyze the stress and strain distribution on the track wheel web surface under varying wheel-rail forces.Locations with minimal coupling interference between vertical and lateral forces were identified as suitable for strain gauge installation.Findings-The results show that due to the track wheel web’s unique curved shape and wheel-rail force loading mechanism,both tensile and compressive states exit on the surface of the web.When vertical force is applied,Mises stress and strain are relatively high near the inner radius of 710 mm and the outer radius of 1110mmof the web.Under lateral force,high Mises stress and strain are observed near the radius of 670mmon the inner and outer sides of the web.As the wheel-rail force application point shifts laterally toward the outer side,the Mises stress and strain near the inner radius of 710 mm of the web gradually decrease under vertical force while gradually increasing near the outer radius of 1110 mm of the web.Under lateral force,the Mises stress and strain on the surface of the web remain relatively unchanged regardless of the wheel-rail force application point.Based on the analysis of stress and strain on the surface of the web under different wheel-rail forces,the inner radius of 870 mm is recommended as the optimal mounting location of strain gauges for measuring vertical force,while the inner radius of 1143 mm is suitable for measuring lateral force.Originality/value-The research findings provide valuable insights for determining optimal strain gauge locations and designing an effective track wheel force measurement system.

柔性轮对的地铁曲线段内轨波磨迁移特性研究

为预防波磨从一侧钢轨迁移至另一侧,建立了柔性轮对的车辆-轨道曲线通过刚柔耦合动力学模型,再现了地铁车辆曲线段时的轮轨接触行为,分析了曲线内轨不同特征波长波磨产生的振动响应和磨耗功率。相比传统多刚体模型,车辆-轨道刚柔耦合模型能将轮对弯曲、扭转和高频振动考虑在内。针对波长极短的40 mm短波、80 mm短波、150 mm中波和200 mm长波波磨四种工况进行仿真,结果表明:随着波长增加,波磨迁移现象越容易产生。对于波长较短的短波引起单侧高频轮轨冲击但波磨不易迁移至另一侧;80 mm短波引起的振动较小,也不易发生迁移;当波长增加至150 mm中长波和200 mm长波后,外轨轮轨力振动开始加剧,150 mm工况外轨纵向轮轨力振荡明显增加,200 mm工况纵向和垂向轮轨力已接近波磨所在侧的振荡幅值,此时很可能发生波磨迁移的现象。

基于信息交互的牵引系统控制策略研究

采用独立轮对的有轨电车可最大程度降低低地板车辆的地板高度,无需高站台设计且方便乘客上下车,发展前景十分广阔。但是独立轮对理论上不存在纵向蠕滑力,曲线导向能力下降,因此对列车牵引制动过程中的出力及控制策略提出更高要求,针对独立轮对有轨电车的特点,本文介绍了一种牵引变流器的设计方案及控制策略,从主电路设计、工作原理、硬件结构等方面进行阐述,基于双功率模块的信息交互,从顶层给出牵引力的优化施加目标,基于分段同步调制及矢量控制策略,实现列车牵引力输出的优化控制。最后,通过现场牵引制动试验及极端恶劣线路空转滑行试验验证了所提设计方案的有效性,对独立轮对牵引系统及类似应用场合的牵引系统硬件设计及控制策略具有一定的指导意义。