Viability of all-solid-state lithium metal battery coupled with oxide solid-state electrolyte and high-capacity cathode

Owing to the utilization of lithium metal as anode with the ultrahigh theoretical capacity density of 3860 mA h g^(-1)and oxide-based ceramic solid-state electrolytes(SE),e.g.,garnet-type Li7La_(3)Zr_(2)O_(12)(LLZO),all-state-state lithium metal batteries(ASLMBs)have been widely accepted as the promising alternatives for providing the satisfactory energy density and safety.However,its applications are still challenged by plenty of technical and scientific issues.In this contribution,the co-sintering temperature at 500℃is proved as a compromise method to fabricate the composite cathode with structural integrity and declined capacity fading of LiNi_(0.5)Co_(0.2)Mn_(0.3)O_(2)(NCM).On the other hand,it tends to form weaker grain boundary(GB)inside polycrystalline LLZO at inadequate sintering temperature for LLZO,which can induce the intergranular failure of SE during the growth of Li filament inside the unavoidable defect on the interface of SE.Therefore,increasing the strength of GB,refining the grain to 0.4μm,and precluding the interfacial defect are suggested to postpone the electro-chemo-mechanical failure of SE with weak GB.Moreover,the advanced sintering techniques to lower the co-sintering temperature for both NCM-LLZO composite cathode and LLZO SE can be posted out to realize the viability of state-of-the-art ASLMBs with higher energy density as well as the guaranteed safety.

Regulating non-precious transition metal nitrides bifunctional electrocatalysts through surface/interface nanoengineering for air-cathodes of Zn-air batteries

Zn-air batteries(ZABs),especially the secondary batteries,have engrossed a great interest because of its high specific energy,economical and high safety.However,due to the insufficient activity and stability of bifunctional electrocatalysts for air-cathode oxygen reduction reaction(ORR)and oxygen evolution reaction(OER)processes,the practical application of rechargeable ZABs is seriously hindered.In the effort of developing high active,stable and cost-effective electrocatalysts,transition metal nitrides(TMNs)have been regarded as the candidates due to their high conductivity,strong corrosion-resistance,and bifunctional catalytic performance.In this paper,the research progress in TMNs-based material as ORR and OER electrocatalysts for ZABs is discussed with respect to their synthesis,chemical/physical characterization,and performance validation/optimization.The surface/interface nanoengineering strategies such as defect engineering,support binding,heteroatom introduction,crystal plane orientation,interface construction and small size effect,the physical and chemical properties of TMNs-based electrocatalysts are emphasized with respect to their structures/morphologies,composition,electrical conductivity,specific surface area,chemical stability and corrosion resistance.The challenges of TMNs-based materials as bifunctional air-cathode electrocatalysts in practical application are evaluated,and numerous research guidelines to solve these problems are put forward for facilitating further research and development.

Stabilizing High-Nickel Cathodes via Interfacial Hydrogen Bonding Effects Using a Hydrofluoric Acid-Scavenging Separator

Nickel-rich layered Li transition metal oxides are the most promising cathode materials for high-energydensity Li-ion batteries.However,they exhibit rapid capacity degradation induced by transition metal dissolution and structural reconstruction,which are associated with hydrofluoric acid(HF)generation from lithium hexafluorophosphate decomposition.The potential for thermal runaway during the working process poses another challenge.Separators are promising components to alleviate the aforementioned obstacles.Herein,an ultrathin double-layered separator with a 10 lm polyimide(PI)basement and a 2 lm polyvinylidene difluoride(PVDF)coating layer is designed and fabricated by combining a nonsolvent induced phase inversion process and coating method.The PI skeleton provides good stability against potential thermal shrinkage,and the strong PI-PVDF bonding endows the composite separator with robust structural integrity;these characteristics jointly contribute to the extraordinary mechanical tolerance of the separator at elevated temperatures.Additionally,unique HF-scavenging effects are achieved with the formation of-CO…H-F hydrogen bonds for the abundant HF coordination sites provided by the imide ring;hence,the layered Ni-rich cathodes are protected from HF attack,which ultimately reduces transition metal dissolution and facilitates long-term cyclability of the Ni-rich cathodes.Li||NCM811 batteries(where“NCM”indicates LiNi_(x)Co_(y)Mn_(1-x-y)O_(2))with the proposed composite separator exhibit a 90.6%capacity retention after 400 cycles at room temperature and remain sustainable at 60℃with a 91.4%capacity retention after 200 cycles.By adopting a new perspective on separators,this study presents a feasible and promising strategy for suppressing capacity degradation and enabling the safe operation of Ni-rich cathode materials.

Progress in doping and crystal deformation for polyanions cathode based lithium-ion batteries

Polyanion-based materials are considered one of the most attractive and promising cathode materials for lithiumion batteries(LIBs)due to their good stability,safety,cost-effectiveness,suitable voltages,and minimal environmental impact.However,these materials suffer from poor rate capability and low-temperature performance owing to limited electronic and ionic conductivity,which restricts their practical applicability.Recent developments,such as coating material particles with carbon or a conductive polymer,crystal deformation through the doping of foreign metal ions,and the production of nanostructured materials,have significantly enhanced the electrochemical performances of these materials.The successful applications of polyanion-based materials,especially in lithium-ion batteries,have been extensively reported.This comprehensive review discusses the current progress in crystal deformation in polyanion-based cathode materials,including phosphates,fluorophosphates,pyrophosphates,borates,silicates,sulfates,fluorosilicates,and oxalates.Therefore,this review provides detailed discussions on their synthesis strategies,electrochemical performance,and the doping of various ions.

A stable anthraquinone-derivative cathode to develop sodium metal batteries: The role of ammoniates as electrolytes

Rechargeable sodium metal batteries constitute a cost-effective option for energy storage although sodium shows some drawbacks in terms of reactivity with organic solvents and dendritic growth.Here we demonstrate that an organic dye,indanthrone blue,behaves as an efficient cathode material for the development of secondary sodium metal batteries when combined with novel inorganic electrolytes.These electrolytes are ammonia solvates,known as liquid ammoniates,which can be formulated as NaI·3.3NH_(3) and NaBF_(4)·2.5NH_(3).They impart excellent stability to sodium metal,and they favor sodium non-dendritic growth linked to their exceedingly high sodium ion concentration.This advantage is complemented by a high specific conductivity.The battery described here can last hundreds of cycles at 10 C while keeping a Coulombic efficiency of 99%from the first cycle.Because of the high capacity of the cathode and the superior physicochemical properties of the electrolytes,the battery can reach a specific energy value as high as 210 W h kgIB^(-1),and a high specific power of 2.2 kW kgIB^(-1),even at below room temperature(4℃).Importantly,the battery is based on abundant and cost-effective materials,bearing promise for its application in large-scale energy storage.

Sb-Cu alloy cathode with a novel lithiation mechanism of ternary intermetallic formation: Enabling high energy density and superior rate capability of liquid metal battery

Antimony(Sb) is an attractive cathode for liquid metal batteries(LMBs) because of its high theoretical voltage and low cost.The main obstacles associated with the Sb-based cathodes are unsatisfactory energy density and poor rate-capability.Herein,we propose a novel Sb_(64)Cu_(36)cathode that effectively tackles these issues.The Sb_(64)Cu_(36)(melting point:525℃) cathode presents a novel lithiation mechanism involving sequentially the generation of Li_(2)CuSb,the formation of Li_(3)Sb,and the conversion reaction of Li_(2)CuSb to Li_(3)Sb and Cu.The generated intermetallic compounds show a unique microstructure of the upper floated Li_(2)CuSb layer and the below cross-linked structure with interpenetrated Li_(2)CuSb and Li_(3)Sb phases.Compared with Li_(3)Sb,the lower Li migration energy barrier(0.188 eV) of Li_(2)CuSb significantly facilitates the lithium diffusion across the intermediate compounds and accelerates the reaction kinetics.Consequently,the Li‖Sb_(64)Cu_(36)cell delivers a more excellent electrochemical performance(energy density:353 W h kg^(-1)at 0.4 A cm^(-2);rate capability:0.59 V at 2.0 A cm^(-2)),and a much lower energy storage cost of only 38.45 $ kW h^(-1)than other previously reported Sb-based LMBs.This work provides a novel cathode design concept for the development of high-performance LMBs in applications for large-scale energy storage.

Penetrative and migratory behavior of alkali metal in different binder based TiB_2-C composite cathodes

In electrolyte melts containing K at low temperature, the penetrative and migratory path of alkali metals （K and Na） in pitch, furan, phenolic aldehyde and epoxy based TiB2-C composite cathodes during the electrolysis process were studied by EDS and self-made modified Rapoport apparatus. The electrolysis expansion rates, the diffusion coefficients of the alkali metals and the corrosion rates of the composite cathode were also calculated and discussed. The results show that no matter what kind of binder is used, alkali metals have the same penetrative path in composite cathodes：firstly in pore, then in binder and finally in carbonaceous aggregates. K and Na penetrate into both binder and carbonaceous aggregates, which leads to the expansion of composite cathodes, and K has stronger penetration ability than Na. Electrolysis expansion rate of resin based composite cathode is smaller than that of pitch based composite cathodes, and so do the diffusion coefficient and corrosion rate. Resin based composite cathode has better resistance ability to the penetration of alkali metals than pith based composite cathode, and phenolic aldehyde based composite cathode exhibits the strongest resistance ability. The penetration rate, the diffusion coefficient of alkali metals in phenolic aldehyde based TiB2-C composite cathode and the corresponding corrosion rate are 4.72 mm/h, 2.24×10^-5 cm^2/s and 2.31 mm/a, respectively.

Synthesis of high-capacity LiNi_(0.8)Co_(0.1)Mn_(0.1)O_2 cathode by transition metal acetates

LiNi0.8Co0.1Mn0.1O2 cathode was synthesized using transition metal acetates under different synthesis conditions. Simultaneous thermogravimetric–differential scanning calorimetry–derivative thermogravimetric analysis was applied to investigating the mixture of transition metal acetates. X-ray powder diffraction and charge–discharge test were adopted to characterize the as-prepared LiNi0.8Co0.1Mn0.1O2. The mixture of transition metal acetates undergoes dehydration and decomposition during heating. All the examined LiNi0.8Co0.1Mn0.1O2 samples have a layered structure with R3 m space group. LiNi0.8Co0.1Mn0.1O2 samples prepared with different lithium sources under different synthesis conditions exhibit very different charge–discharge performances. The sample synthesized via the procedure of sintering at 800 °C after heating lithium carbonate and transition metal acetates at 550 °C achieves a highest capacity of 200.8 m A·h/g and an average capacity of 188.1 mA ·h/g in the first 20 cycles at 0.2C.

Influence of counter electrode material during accelerated durability test of non-precious metal electrocatalysts in acidic medium

Significant progress has been made in the development of non-precious metal electrocatalysts （NPMEs） during the past decade. Correspondingly, there is an urgent demand for an appropriate measurement method to be established for the reliable evaluation of NPMEs. In this study, platinum and graphite counter electrodes were used to investigate the impact of counter electrode material on the accelerated durability testing （ADT） of NPMEs in acidic medium. Platinum used as the coun- ter electrode in a traditional three-electrode electrochemical cell was found to dissolve in acidic medium and re-deposit on NPME coated on the working electrode during ADT. Such re-deposition causes the oxygen reduction reaction （ORR） performance of NPMEs to remarkably improve, and thus will seriously mislead our judgment of NPMEs if we are unaware of it. The phenomenon can be avoided using a graphite counter electrode.

Cocoon-shaped P3-type K0.5Mn0.7Ni0.3O2 as an advanced cathode material for potassium-ion batteries

Potassium ion batteries(PIBs)are emerging as potential next-generation energy storage systems on account of their low cost and high theoretical energy density.Nevertheless,they also face challenges of low specific capacity and suboptimal cycling stability.Herein,we synthesize a cocoon-like P3-type K_(0.5)Mn_(0.7)Ni_(0.3)O_(2)(KMNO)cathode material by a self-template method.The KMNO cocoons possess a hierarchical layered architecture composed of nanoparticle stacking,which can accelerate the transport kinetics of potassium ions,mitigate the stress caused by K^(+)intercalation and deintercalation,and improve structural stability.In addition,Ni can not only alleviate the Jahn-Teller distortion and suppress the phase transition to stabilize the structure,but also act as an electrochemically active element,providing the capacity of two electrons from Ni2+to Ni4+.Combining the advantages of structure and nickel substitution,the P3-type KMNO cocoons are used for electrochemical performance testing of PIB cathodes,delivering an excellent rate capability of 57.1 m A h g^(-1)at 500 m A g^(-1)and a remarkable cycling stability of 77.0%over 300 cycles at 100 m A g^(-1).Impressively,the KMNO cocoons//pitch-derived soft carbon assembled full battery exhibits superior electrochemical performance with a reversible capacity of 79.7 m A h g^(-1)at 50 m A g^(-1).Moreover,ex-situ XRD also further reveals a solid solution phase reaction with a volume change of only 1.46%.This work furnishes a suitable approach to fabricating highperformance layered oxide cathodes for PIBs with outstanding cycling stability and rate capability.

Unique double-layer solid electrolyte interphase formed with fluorinated ether-based electrolytes for high-voltage lithium metal batteries

Li metal batteries using high-voltage layered oxides cathodes are of particular interest due to their high energy density.However,they suffer from short lifespan and extreme safety concerns,which are attributed to the degradation of layered oxides and the decomposition of electrolyte at high voltage,as well as the high reactivity of metallic Li.The key is the development of stable electrolytes against both highvoltage cathodes and Li with the formation of robust interphase films on the surfaces.Herein,we report a highly fluorinated ether,1,1,1-trifluoro-2-[(2,2,2-trifluoroethoxy)methoxy]ethane(TTME),as a cosolvent,which not only functions as a diluent forming a localized high concentration electrolyte(LHCE),but also participates in the construction of the inner solvation structure.The TTME-based electrolyte is stable itself at high voltage and induces the formation of a unique double-layer solid electrolyte interphase(SEI)film,which is embodied as one layer rich in crystalline structural components for enhanced mechanical strength and another amorphous layer with a higher concentration of organic components for enhanced flexibility.The Li||Cu cells display a noticeably high Coulombic efficiency of 99.28%after 300 cycles and Li symmetric cells maintain stable cycling more than 3200 h at 0.5 mA/cm^(2) and 1.0m Ah/cm^(2).In addition,lithium metal cells using LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) and Li CoO_(2) cathodes(both loadings~3.0 m Ah/cm^(2))realize capacity retentions of>85%over 240 cycles with a charge cut-off voltage of 4.4 V and 90%for 170 cycles with a charge cut-off voltage of 4.5 V,respectively.This study offers a bifunctional ether-based electrolyte solvent beneficial for high-voltage Li metal batteries.

A review on liquid metals as cathodes for molten salt/oxide electrolysis

Compared with solid metals,liquid metals are considered more promising cathodes for molten slat/oxide electrolysis due to their fascinating advantages,which include strong depolarization effect,strong alloying effect,excellent selective separation,and low operating temperature.In this review,we briefly introduce the properties of the liquid metal cathodes and their selection rules,and then summarize development in liquid metal cathodes for molten salt electrolysis,specifically the extraction of Ti and separation of actinides and rare-earth metals in halide melts.We also review recent attractive progress in the preparation of liquid Ti alloys via molten oxide electrolysis by using liquid metal cathodes.Problems related to high-quality alloy production and large-scale applications are cited,and several research directions to further improve the quality of alloys are also discussed to realize the industrial applications of liquid metal cathodes.

Enhanced electrodeposition and separation of metallic Cr from soluble K2CrO4 on a liquid Zn cathode

Carbon contamination and the formation of low-valence oxides limit the preparation of refractory metals by molten salt electrolysis.In this paper,a liquid Zn cathode is adopted for the electrochemical reduction of soluble K2CrO4 to metallic Cr in CaCl2-KCl molten salt.It is found that CrO4^2-can be directly electrochemically reduced to Cr via a six-electron-transfer step and low-valence Cr oxides is hardly produced.The reduction rate is obviously increased from 16.7 mgCrh^-1cm^-2 on the solid Mo cathode to58.7 mgCrh-1cm-2on liquid Zn cathode.The electrodeposited Cr is distributed in liquid Zn cathode.Carbon contamination is effectively avoided due to the negligible solubility of carbon in the liquid Zn cathode.Furthermore,Cr can be effectively separated and enriched to the bottom of liquid Zn under supergravity field,realizing the efficient acquisition of metallic Cr and recycling of liquid Zn.The method herein provides a promising route for the preparation of refractory metals with high-purity by molten salt electrolysis.

Nanocarbon-based metal-free and non-precious metal bifunctional electrocatalysts for oxygen reduction and oxygen evolution reactions

The oxygen reduction/evolution reactions(ORR/OER) are a key electrode process in the development of electrochemical energy conversion and storage devices,such as metal-air batteries and reversible fuel cells.The search for low-cost high-performance nanocarbon-based metal-free and non-precious metal bifunctional electrocatalysts for ORR/OER alternatives to the widely-used noble metal-based catalysts is a research focus.This review aims to outline the opportunities and available options for these nanocarbon-based bifunctional electrocatalysts.Through discussion of some current scientific issues,we summarize the development and breakthroughs of these electrocatalysts.Then we provide our perspectives on these issues and suggestions for some areas in the further work.We hope that this review can improve the interest in nanocarbon-based metal-free and non-precious metal bifunctional electrocatalysts for ORR/OER.

Electrocatalytic activity of non-precious metal catalyst Co-N/C toward oxygen reduction reaction

Metallic cobalt was deposited on acetylene black to synthesize a composite Co/C by chemical reduction method.A platinumfree electrocatalyst Co-N/C（800） for oxygen reduction reaction（ORR） was synthesized by mixing the composite Co/C with urea and heat-treating at 800℃.The results from linear sweep voltammograms indicated that the Co-N/C（800） is active to ORR.Theβ-Co and cobalt oxides are not the active site of the catalyst Co-N/C.However,the existence of cobalt facilitated the modification of nitrogen to carbon black and led to the formation of active site of catalyst Co-N/C（800）.

Metal phosphides and borides as the catalytic host of sulfur cathode for lithium–sulfur batteries

Lithium−sulfur batteries are one of the most competitive high-energy batteries due to their high theoretical energy density of _(2)600 W·h·kg^(−1).However,their commercialization is limited by poor cycle stability mainly due to the low intrinsic electrical conductivity of sulfur and its discharged products(Li_(2)S_(2)/Li_(2)S),the sluggish reaction kinetics of sulfur cathode,and the“shuttle effect”of soluble intermediate lithi-um polysulfides in ether-based electrolyte.To address these challenges,catalytic hosts have recently been introduced in sulfur cathodes to en-hance the conversion of soluble polysulfides to the final solid products and thus prevent the dissolution and loss of active-sulfur material.In this review,we summarize the recent progress on the use of metal phosphides and borides of different dimensions as the catalytic host of sulfur cathodes and demonstrate the catalytic conversion mechanism of sulfur cathodes with the help of metal phosphides and borides for high-en-ergy and long-life lithium-sulfur batteries.Finally,future outlooks are proposed on developing advanced catalytic host materials to improve battery performance.

Facile construction of a multilayered interface for a durable lithium‐rich cathode

Layered lithium-rich manganese-based oxide(LRMO)has the limitation of inevitable evolution of lattice oxygen release and layered structure transformation.Herein,a multilayer reconstruction strategy is applied to LRMO via facile pyrolysis of potassium Prussian blue.The multilayer interface is visually observed using an atomic-resolution scanning transmission electron microscope and a high-resolution transmission electron microscope.Combined with the electrochemical characterization,the redox of lattice oxygen is suppressed during the initial charging.In situ X-ray diffraction and the high-resolution transmission electron microscope demonstrate that the suppressed evolution of lattice oxygen eliminates the variation in the unit cell parameters during initial(de)lithiation,which further prevents lattice distortion during long cycling.As a result,the initial Coulombic efficiency of the modified LRMO is up to 87.31%,and the rate capacity and long-term cycle stability also improved considerably.In this work,a facile surface reconstruction strategy is used to suppress vigorous anionic redox,which is expected to stimulate material design in high-performance lithium ion batteries.

Carbon-based derivatives from metal-organic frameworks as cathode hosts for Li–S batteries

Lithium-sulfur batteries(Li–S batteries) are promising candidates for the next generation high-energy rechargeable Li batteries due to their high theoretical specific capacity(1672 m Ahg-1) and energy density(2500 Wh kg-1). The commercialization of Li–S batteries is impeded by several key challenges at cathode side, e.g. the insulating nature of sulfur and discharged products(Li2S 2 and Li2S), the solubility of long-chain polysulfides and volume variation of sulfur cathode upon cycling. Recently, the carbonbased derivatives from metal-organic frameworks(MOFs) has emerged talent in their utilization as cathode hosts for Li–S batteries. They are not only highly conductive and porous to enable the acceleration of Li +/e-transfer and accommodation of volumetric expansion of sulfur cathode during cycling, but also enriched by controllable chemical active sites to enable the adsorption of polysulfides and promotion of their conversion reaction kinetics. In this review, based on the types of MOFs(e.g. ZIF-8, ZIF-67, Prussian blue, Al-MOF, MOF-5, Cu-MOF, Ni-MOF), the synthetic methods, formation process and morphology, structural superiority of MOFs-derived carbon frameworks along with their electrochemical performance as cathode host in Li–S batteries are summarized and discussed.

UiO-66 type metal-organic framework as a multifunctional additive to enhance the interfacial stability of Ni-rich layered cathode material

To effectively alleviate the surface structure degradation caused by electrolyte corrosion and transition metal(TM) dissolution for Ni-rich(Ni content > 0.6) cathode materials, porous Zirconium based metalorganic frameworks(Zr-MOFs, UiO-66) material is utilized herein as a positive electrode additive. UiO-66 owns tunable attachment sites and strong binding affinity, making itself an efficient defluorination agent to suppress the undesirable reactions caused by fluorine species. Besides, it can also relieve TMs dissolution and block the migration of TMs toward anode side since it’s a multifarious metal ions adsorbent,realizing both cathode and anode interface protection. Benefiting from these advantages, the UiO-66 assistant Ni-rich cathode achieves superior cycling stability. Particularly in full cell, the positive effects of this multifunctional additive are more pronounced than in the half-cell, that is after 400 cycles at 2 C,the capacity retention has doubled with the addition of UiO-66. More broadly, this unique application of functional additive provides new insight into the degradation mechanism of layered cathode materials and offers a new avenue to develop high-energy density batteries.

Two-dimensional organic cathode materials for alkali-metal-ion batteries

With the increasing demand for large-scale battery systems in electric vehicles（EVs） and smart renewable energy grids, organic materials including small molecules and polymers utilized as electrodes in rechargeable batteries have received increasing attraction. In recent years, two-dimensional（2D） organic materials possessing planar layered architecture exhibit optional chemical modification, high specific surface area as well as unique electrical/magnetic properties, which have been emerging as the promising functional materials for wide applications in optoelectronics, catalysis, sensing, etc. Integrating with high-density redox-active sites and hierarchical porous structure, significant achievements in 2D organic materials as cathode materials for alkali-metal-ion batteries have been witnessed. In this review, the recent progress in synthetic approaches, structure analyses, electrochemical characterizations of 2D organic materials as well as their application in alkali-metal-ion batteries containing lithium ion battery（LIB）, lithium sulfur battery（LSB）, lithium air battery（LAB） and sodium ion battery（SIB） are summarized systematically,and their current challenges including cycling stability and electron conductivity for cathode materials in battery fields are also discussed.