According to site-specific environments such as high water pressures, high in-situ stresses and strong rockbursts, the design scheme of the long and deep diversion tunnels at Jinping II hydropower station was optimize...According to site-specific environments such as high water pressures, high in-situ stresses and strong rockbursts, the design scheme of the long and deep diversion tunnels at Jinping II hydropower station was optimized to ensure construction safety. New drainage tunnels were considered. Furthermore, lining structures and grouting pressures were modified during the excavation of tunnels. The construction scheme was updated dynamically based on the complex geological conditions. For instances, the diversion tunnels were first excavated by drilling and blasting method at the first stage of construction, and then by the combination method of tunnel boring machine （TBM） and drilling and blasting, and finally by drilling and blasting method. Through optimized scheme and updated construction scheme, the excavation of diversion tunnel #1 was successfully completed in June, 2011. This paper summarizes the key issues in rock mechanics associated with the construction of the long and deep diversion tunnels at Jinping II hydropower station. The experiences of design and construction obtained from this project could provide reference to similar projects.展开更多
In most studies of tunnel boring machine(TBM)tunnelling, the groundwater pressure was not considered, or was simplified and exerted on the boundary of lining structure. Meanwhile, the leakage, which mainly occurs in t...In most studies of tunnel boring machine(TBM)tunnelling, the groundwater pressure was not considered, or was simplified and exerted on the boundary of lining structure. Meanwhile, the leakage, which mainly occurs in the segment joints, was often ignored in the relevant studies of TBM tunnelling. Additionally, the geological models in these studies were simplified to different extents, and mostly were simplified as homogenous bodies. Considering the deficiencies above, a 3D refined model of the surrounding rock of a tunnel is firstly established using NURBS-TIN-BRe P hybrid data structure in this paper. Then the seepage field of the surrounding rock considering the leakage in the segment joints is simulated. Finally, the stability of TBM water diversion tunnel is studied coupled with the seepage simulation, to analyze the stress-strain conditions, the axial force and the bending moment of tunnel segment considering the leakage in the segment joints. The results illustrate that the maximum radial displacement, the minimum principal stress, the maximum principal stress and the axial force of segment lining considering the seepage effect are all larger than those disregarding the seepage effect.展开更多
Based on water inrush accident of 1841 working face of Desheng Coal Mine in Wu'an, Hebei province, China, an evaluation model of hydrodynamic characteristics of the project is set up and simulated using Matlab. It...Based on water inrush accident of 1841 working face of Desheng Coal Mine in Wu'an, Hebei province, China, an evaluation model of hydrodynamic characteristics of the project is set up and simulated using Matlab. It is assumed that the pipe flow would transform into seepage flow when the aggregates are plugged into the water inrush channel and the seepage flow would disappear along with grouting process. The simulation results show that the flow velocity will increase with an increase in height of aggregates accumulation body during the aggregates filling process; the maximum seepage velocity occurs on the top of plugging zone; and the water flow decreases with increasing plugging height of water inrush channel. Finally, the field construction results show that the water inrush channel can be plugged effectively by the compacted body prepared with aggregate and cement slurry.展开更多
Firstly,the common design principles for diversion tunnel plug are generalized,and two kinds of numerical analysis methods are discussed.Then the strength reduction FEM is introduced in numerical model analysis and th...Firstly,the common design principles for diversion tunnel plug are generalized,and two kinds of numerical analysis methods are discussed.Then the strength reduction FEM is introduced in numerical model analysis and the design steps of the plug's length are illustrated.During the progress to determine the plug's length,the equivalent plastic strain on the potential slip surface is assumed as the flag to tell the failure against sliding,and the plug stability is overall estimated from the plastic zone range and connectivity.展开更多
On-site monitoring and numerical simulation have been combined to analyze the stability of the jointed surrounding rock and the stress inside the lining structure of a sample deeply buried hydraulic tunnel.We show tha...On-site monitoring and numerical simulation have been combined to analyze the stability of the jointed surrounding rock and the stress inside the lining structure of a sample deeply buried hydraulic tunnel.We show that the deformation around the tunnel was mainly concentrated in the range 51.37 mm∼66.73 mm,the tunnel circumference was dominated by shear failure,and the maximum plastic zone was about 3.90 m.When the shotcrete treatment was performed immediately after the excavation,the deformation of the surrounding rock was reduced by 58.94%∼76.31%,and the extension of the plastic zone was relatively limited,thereby leading to improvements in terms of the stability of surrounding rock.When the support was provided at different time points,the stress of the surrounding rock in the shallow part of the tunnel was improved everywhere.In the tunnel section with high ground stress and joint development,when 10 cm steel fiber concrete spray layer and 40 cm C25 concrete secondary lining were used,the maximum tensile stress on the lining structure was 0.89 MPa,i.e.,it was less than the tensile strength of concrete,which indicates that the internal force of the lining can meet the overall requirements.展开更多
文摘According to site-specific environments such as high water pressures, high in-situ stresses and strong rockbursts, the design scheme of the long and deep diversion tunnels at Jinping II hydropower station was optimized to ensure construction safety. New drainage tunnels were considered. Furthermore, lining structures and grouting pressures were modified during the excavation of tunnels. The construction scheme was updated dynamically based on the complex geological conditions. For instances, the diversion tunnels were first excavated by drilling and blasting method at the first stage of construction, and then by the combination method of tunnel boring machine （TBM） and drilling and blasting, and finally by drilling and blasting method. Through optimized scheme and updated construction scheme, the excavation of diversion tunnel #1 was successfully completed in June, 2011. This paper summarizes the key issues in rock mechanics associated with the construction of the long and deep diversion tunnels at Jinping II hydropower station. The experiences of design and construction obtained from this project could provide reference to similar projects.
基金Supported by the Foundation for Innovation Research Groups of the National Natural Science Foundation of China(No.51321065)Tianjin Research Program of Application Foundation and Advanced Technology(No.12JCZDJC29200)Tianjin Natural Science Foundation(No.13JCYBJC19500)
文摘In most studies of tunnel boring machine(TBM)tunnelling, the groundwater pressure was not considered, or was simplified and exerted on the boundary of lining structure. Meanwhile, the leakage, which mainly occurs in the segment joints, was often ignored in the relevant studies of TBM tunnelling. Additionally, the geological models in these studies were simplified to different extents, and mostly were simplified as homogenous bodies. Considering the deficiencies above, a 3D refined model of the surrounding rock of a tunnel is firstly established using NURBS-TIN-BRe P hybrid data structure in this paper. Then the seepage field of the surrounding rock considering the leakage in the segment joints is simulated. Finally, the stability of TBM water diversion tunnel is studied coupled with the seepage simulation, to analyze the stress-strain conditions, the axial force and the bending moment of tunnel segment considering the leakage in the segment joints. The results illustrate that the maximum radial displacement, the minimum principal stress, the maximum principal stress and the axial force of segment lining considering the seepage effect are all larger than those disregarding the seepage effect.
基金Financial support for this work, provided by the National Natural Science Foundation of China (Nos. 41072031, 40172119)the Natural Science Foundation of Hebei Province of China(No. D2012402008)
文摘Based on water inrush accident of 1841 working face of Desheng Coal Mine in Wu'an, Hebei province, China, an evaluation model of hydrodynamic characteristics of the project is set up and simulated using Matlab. It is assumed that the pipe flow would transform into seepage flow when the aggregates are plugged into the water inrush channel and the seepage flow would disappear along with grouting process. The simulation results show that the flow velocity will increase with an increase in height of aggregates accumulation body during the aggregates filling process; the maximum seepage velocity occurs on the top of plugging zone; and the water flow decreases with increasing plugging height of water inrush channel. Finally, the field construction results show that the water inrush channel can be plugged effectively by the compacted body prepared with aggregate and cement slurry.
基金National Natural Science Foundation of China(No.50809051)
文摘Firstly,the common design principles for diversion tunnel plug are generalized,and two kinds of numerical analysis methods are discussed.Then the strength reduction FEM is introduced in numerical model analysis and the design steps of the plug's length are illustrated.During the progress to determine the plug's length,the equivalent plastic strain on the potential slip surface is assumed as the flag to tell the failure against sliding,and the plug stability is overall estimated from the plastic zone range and connectivity.
基金This work was financially supported by the National Natural Science Foundation of China(Grant No.51769031)Regional Innovation Guidance Plan Project of the XPCC(Grant No.2021BB004).
文摘On-site monitoring and numerical simulation have been combined to analyze the stability of the jointed surrounding rock and the stress inside the lining structure of a sample deeply buried hydraulic tunnel.We show that the deformation around the tunnel was mainly concentrated in the range 51.37 mm∼66.73 mm,the tunnel circumference was dominated by shear failure,and the maximum plastic zone was about 3.90 m.When the shotcrete treatment was performed immediately after the excavation,the deformation of the surrounding rock was reduced by 58.94%∼76.31%,and the extension of the plastic zone was relatively limited,thereby leading to improvements in terms of the stability of surrounding rock.When the support was provided at different time points,the stress of the surrounding rock in the shallow part of the tunnel was improved everywhere.In the tunnel section with high ground stress and joint development,when 10 cm steel fiber concrete spray layer and 40 cm C25 concrete secondary lining were used,the maximum tensile stress on the lining structure was 0.89 MPa,i.e.,it was less than the tensile strength of concrete,which indicates that the internal force of the lining can meet the overall requirements.
