Failure mechanism and safety control technology of a composite strata roadway in deep and soft rock masses:a case study

The construction of coal mines often encounters deep composite soft rock roadways,which is characterized by significant deformation and poor stability.To deeply study the failure mechanism and large deformation challenges of a composite strata roadway in deep and soft rock masses,a numerical model of 3DEC tetrahedral blocks was established based on the method of rock quality designation(RQD).The results showed that original support cannot prevent asymmetric failure and large deformation due to the adverse geological environment and unsuitable support design.According to the failure characteristics,a coupling support of“NPR bolt/cable+mesh+shotcrete+steel pipe”was proposed to control the stability of the surrounding rock.The excellent mechanical properties of large deformation(approximately 400 mm)and high constant resistance force(bolt with 180 k N;cable with 350 k N)were evaluated by the tensile tests.The numerical results showed that the maximum deformation was minimized to 243 mm,and the bearing capacity of the surrounding rock of the roadway was enhanced.The field test results showed that the maximum deformation of the surrounding rock was 210 mm,and the forces of the NPR bolt and cable were stable at approximately 180 k N and 350 k N,respectively.This demonstrated the effectiveness of the coupling support with the NPR bolt and cable,which could be a guiding significance for the safety control of large deformation and failure in deep composite soft rock roadways.

Mechanism of rock burst caused by fracture of key strata during irregular working face mining and its prevention methods

To study the occurrence mechanism of rock burst during mining the irregular working face,the study took irregular panel 7447 near fault tectonic as an engineering background.The spatial fracture characteristic of overlying strata was analyzed by Winkler elastic foundation beam theory.Furthermore,the influence law of panel width to suspended width and limit breaking span of key strata were also analyzed by thin plate theory.Through micro-seismic monitoring,theoretical analysis,numerical simulation and working resistance of support of field measurement,this study investigated the fracture characteristic of overlying strata and mechanism of rock burst in irregular working face.The results show that the fracture characteristic of overlying strata shows a spatial trapezoid structure,with the main roof being as an undersurface.The fracture form changes from vertical‘‘O-X"type to transverse‘‘O-X"type with the increase of trapezoidal height.From the narrow mining face to the wide mining face,the suspended width of key strata is greater than its limit breaking width,and a strong dynamic load is produced by the fracture of key strata.The numerical simulation and micro-seismic monitoring results show that the initial fracture position of key strata is close to tailgate 7447.Also there is a high static load caused by fault tectonic.The dynamic and static combined load induce rock burst.Accordingly,a cooperative control technology was proposed,which can weaken dynamic load by hard roof directional hydraulic fracture and enhance surrounding rock by supporting system.

Investigation on fracture models and ground pressure distribution of thick hard rock strata including weak interlayer

Dynamic disasters,such as rock burst due to the breaking of large area stiff roof strata,are known to occur in the hard rock strata of coal mines.In this paper,mechanical models of the fracturing processes of thick hard rock strata were established based on the thick plate theory and numerical simulations.The results demonstrated that,based on the fracture characteristics of the thick hard rock strata,four fracture models could be analyzed in detail,and the corresponding theoretical failure criteria were determined in detail.In addition,the influence of weak interlayer position on the fracture models and ground pressure of rock strata is deeply analyzed,and six numerical simulation schemes have been implemented.The results showed that the working face pressure caused by the independent movement of the lower layer is relatively low.The different fracture type of the thick hard rock strata had different demands on the working resistance of the hydraulic powered supports.The working resistance of the hydraulic powered supports required by the stratified movements was lower than that of the non-stratified movements.

Time-dependent safety of lining structures of circular tunnels in weak rock strata

Following tunnel excavation and lining completion,fractured surrounding rock deforms gradually over time;this results in a time-dependent evolution of the pressure applied to the lining structure by the surrounding rock.Thus,the safety of the tunnel lining in weak strata is strongly correlated with time.In this study,we developed an analytical method for determining the time-dependent pressure in the surrounding rock and lining structure of a circular tunnel under a hydrostatic stress field.Under the proposed method,the stress–strain relationship of the fractured surrounding rock is assumed to conform to that of the Burgers viscoelastic component,and the lining structure is assumed to be an elastomer.Based on these assumptions,the viscoelastic deformation of the surrounding rock,the elastic deformation of the lining structure,and the coordinated deformation between the surrounding rock and lining structure were derived.The proposed analytical method,which employs a time-dependent safety coefficient,was subsequently used to estimate the durability of the lining structure of the Foling Tunnel in China.The derived attenuation curve of the safety coefficient with respect to time can assist engineers in predicting the remaining viable life of the lining structure.Unlike existing analytical methods,the method derived in this study considers the time dependency of the interaction between the surrounding rock and tunnel lining;hence,it is more suitable for the evaluation of lining lifetime.

Study on strata control by delay grouting in soft rock roadway

The properties of broken rock before and after grouting reinforcement are studied. Testing results show that grouting can raise the residual strength of broken rock, and the broken rockness by grouting can keep the steady supporting capacity within a relatively large deformation range. Revealing of the characteristics of stage deformation and damage process comes to the conclusion that the supporting of soft rock roadway should be analyzed in a dynamic view, and the grouting should be delayed at a proper occasion. Based on the above, the stepwise reinforcement technology characterized by immediate shotcreting, timely bolting and delay grouting is put forward and illustrated with a successful engineering practice.

Experimental investigation on behaviors of bolt-supported rock strata surrounding an entry in large dip coal seam

In order to investigate the behaviors and stability of rock strata surrounding an entry with bolt supporting in large dip coal seams (LDCSs) dipping from 25° to 45°, a self-developed rotatable experimental frame for similar material simulation test was used to build the model with the dip of 30°, based on analyses of geological and technological conditions in Huainan mine area, Anhui, China. The strata behaviors, such as extracting- and mining-induced stresses development, deformation and failure modes, were synthetically integrated during working face advancing. Results show that the development characteristics of mining-induced stress and deformation are asymmetrical in the roadway. The strata behaviors are totally different in different sections of the roadway. Because of asymmetrically geometrical structure influenced by increasing dip, strata dislocating, rock falling and breaking occur in roof. Then, squeezing, collapsing and caving of coal happen in upper- and lower-rib due to shearing action caused by asymmetrical roof bending and dislocating. Owing to the absence of supporting, floor heaving is very violent and usually the zone of floor heaving develops from the lower-rib to upper-rib. Engineering practices show that, due to the asymmetrical characteristics of rock pressure and roadway configuration, it is more difficult to implement bolt supporting system to control rock stability of roadways in LDCSs. The upper-rib and roof of entries are the key sections. Consequently, it is reliable to use asymmetrical bolt-mesh-cable supporting system to control rock stability of roadways based on the asymmetrical characteristics of roadway configuration and strata behaviors.

Research on the relation between rock burst and movement of strata and surface

Large-scale bed separation in bending strip upside cranny strip was brought by un-consistency of overlying strata subsidence movement due to under surface mining. Different characteristic of movement and deformation of overlying strata and surface include periodic caving of bed separation interspaced along with work face mining. Conglomerate rock layer movement is the main power fountain of rock burst on the basis of locale observation. And rock burst moves periodically adapted to movement of deep conglomerate rock layer which had similar characteristic with main roof. Practice indicates this method that forecasting and prediction using correlation information of movement of strata and surface is feasible and has reference meaning for similar stope.

Rock Pressure on Tunnel with Shallow Depth in Geologically Inclined Bedding Strata

The method to calculate rock pressure to which the lining structure of tunnel with shallow depth is subjected in geologically inclined bedding strata is analyzed and put forward. Both the inclination angle of bedding strata as well as the internal friction angle of bedding plane and its cohesion all exert an influence upon the magnitude of the asymmetric rock pressure applied to tunnel. The feature that rock pressure applied to tunnel structure varies with the incUnation angle of bedding strata is discussed, At last, the safety factor, which is utilized to evaluate the working state of tunnel lining structure, is calculated for both symmetric and asymmetric lining structures. The calculation results elucidate that the asymmetric tunnel structure can be more superior to bear rock pressure in comparison with the symmetric one and should be adopted in engineering as far as possible.

Evaluation and prediction of earth pressure balance shield performance in complex rock strata:A case study in Dalian,China

This research explores the potential for the evaluation and prediction of earth pressure balance shield performance based on a gray system model.The research focuses on a shield tunnel excavated for Metro Line 2 in Dalian,China.Due to the large error between the initial geological exploration data and real strata,the project construction is extremely difficult.In view of the current situation regarding the project,a quantitative method for evaluating the tunneling efficiency was proposed using cutterhead rotation(R),advance speed(S),total thrust(F)and torque(T).A total of 80 datasets with three input parameters and one output variable(F or T)were collected from this project,and a prediction framework based gray system model was established.Based on the prediction model,five prediction schemes were set up.Through error analysis,the optimal prediction scheme was obtained from the five schemes.The parametric investigation performed indicates that the relationships between F and the three input variables in the gray system model harmonize with the theoretical explanation.The case shows that the shield tunneling performance and efficiency are improved by the tunneling parameter prediction model based on the gray system model.

Clay Mineralogical and Geochemical Studies of Detrital Rocks of the Upper Cretaceous Salt-bearing Strata,Simao Basin,SW China:Implication for Provenance and Source Weathering

1 Introduction Geological studies established on several sections in Lanping-Simao basin have shown that the salt-bearing strata of Mengyejing formation(Yunlong Fm.in Lanping basin)are constituted by an alternation of salt layers and interbedded facies.The latter consists mainly of mudstones,and mudstone-rich conglomerate.The mineralogy and geochemistry of salt-bearing beds and

Study on the distribution of strata rock temperature around a driving head with auxiliary ventilation

The distributions of strata rock temperature around a driving head with auxil- iary ventilation were analyzed theoretically based on a program which was developed by the authors to predict the thermal environmental conditions in a development heading with forcing auxiliary ventilation. The influences of wetness of the airway surface were dis- cussed on the cooled zone of the strata rock and on the temperature distribution in the surrounding rock. It is shown that the advancing speed and driving time have little influ- ence on the temperature profile in front of the working face of a driving airway, and the rock temperature 1.5 m ahead of the working face can be taken as the virgin rock tem- perature.

Stability of High Slope Interbedded Strata with Low Dip Angle Constituted by Soft and Hard Rock Mass

Slopes consisting of interbedded strata of soft and hard rock mass, such as purplish red mudstone and grey brown arkosic sandstone of Jurassic age, are very common in Sichuan basin of China. The mudstone is soft while the sandstone is hard and contains many opening or closing joints with a high dip angle. Some are nearly parallel and the others are nearly decussated with the trend of the slopes. Many natural slopes are in deformation or sliding because of those reasons. The stability of cutting slopes and supporting method to be taken for their stability in civil engineering are important. In this paper, the stability and deformation of the slopes are studied. The methods of analysis and support design principle are analyzed also. Finally, the method put forward is applied to study Fengdian high cutting slope in Sichuan section of the express way from Chengdu to Shanghai. The results indicate that the method is effective.

A semi-infinite beam theoretical model on predicting rock slope subsidence induced by underground mining

When the mining goaf is close to the cliff,rock slope subsidence induced by underground mining is significantly affected by its boundary conditions.In this study,an analytical method is proposed by considering the key strata as a semi-infinite Euler-Bernoulli beam rested on a Winkler foundation with a local subsidence area.The analytical solutions of deflection are derived by analyzing the boundary and continuity conditions of the cliff.Then,the analytical solutions are verified by the results from experimental tests,FEM and InSAR,respectively.After that,the influence of changing parameters on deflections is studied with sensitivity analysis.The results show that the distance between goaf and cliff significantly affects the deflection of semi-infinite beam.The response of semi-infinite beam is obviously determined by the length of goaf and the bending stiffness of beam.The comparisons between semi-infinite beam and infinite beam illustrate the ascendancy of the improved model in such problems.

RESEARCH ON THE SEROSITY DURING INJECTING CLAY GROUTS INTO THE OVERLYING ROCK STRATA

On the basis of the mechanism study of injecting clay grouts into overlying strata, the clay grouts are researched in greater detail from three aspects. The flowing state of clay grouts in the strata——the pattern of different direction flowing around a point source is advanced and the flowing equation is put forward which is correspond with experiment result, and the corresponding mechanical model is set up which has its formulistic study, and the function of clay grouts is also discussed after the water in it has been lost, at the same time the concept of similar rock in effective supporting zone is given. It would draw great positive inspiration from what studied in this paper for studying on drawing down the surface subsidence by injecting.

Shield Excavation Analysis: Ground Settlement & Mechanical Responses in Complex Strata

This study delves into the effects of shield tunneling in complex coastal strata, focusing on how this constructionmethod impacts surface settlement, the mechanical properties of adjacent rock, and the deformation of tunnelsegments. It investigates the impact of shield construction on surface settlement, mechanical characteristics ofnearby rock, and segment deformation in complex coastal strata susceptible to construction disturbances. Utilizingthe Fuzhou Binhai express line as a case study, we developed a comprehensive numerical model using theABAQUS finite element software. The model incorporates factors such as face force, grouting pressure, jack force,and cutterhead torque. Its accuracy is validated against field monitoring data from engineering projects. Simulationswere conducted to analyze ground settlement and mechanical changes in adjacent rock and segments acrossfive soil layers. The results indicate that disturbances are most significant near the excavation zone of the shieldmachine, with a prominent settlement trough forming and stabilizing around 2.0–3.0 D from the excavation. Theexcavation face compresses the soil, inducing lateral expansion. As grouting pressure decreases, the segmentexperiences upward buoyancy. In mixed strata, softer layers witness increased cutting, intensifying disturbancesbut reducing segment floatation. These findings offer valuable insights for predicting settlements, ensuring segmentand rock safety, and optimizing tunneling parameters.

冲击载荷下叠合岩层巷道围岩的应力演化数值模拟研究——基于岩层运动并行计算系统StrataKing

煤系地层属于典型的层状沉积岩层,这在传统连续介质模型中不能被较好反映。为了探究冲击载荷下叠合岩层巷道围岩的应力演化规律,采用以拉格朗日元与离散元耦合连续-非连续方法为基础发展的岩层运动并行计算系统StrataKing,基于理想化模型分析了巷道上表面附近应力波的叠加。阐明了应力波叠加导致顶板开裂机理,并且探讨了冲击载荷幅值的影响规律。研究发现:在原始压应力波传至巷道上表面附近测点后,该测点的最大主应力刚开始呈下降-上升-下降的变化趋势,这是由原始压、拉应力波不同时刻的叠加不同导致的;由于次级应力波的波长较原始应力波的小,次级压、拉应力波的单独作用更明显,它们的叠加使巷道上表面附近测点能产生更低和更高的最大主应力,甚至导致顶板开裂;冲击载荷幅值越大,近似阶梯增长阶段中拉裂纹平均发展速度越快,巷道围岩最终开裂范围越大,巷道围岩平衡越困难。

Evaluation of load transfer mechanism under axial loads in a novel coupler of dual height rock bolts

The effective reinforcement of two or more overlying layers of mine openings in a single installation is usually done by coupling of two standard rock bolts mainly during the extraction of medium-thick coal seams.However,field observations show that the couplers of multiple bolts often degrade or break mostly at their connections.These types of failures can be avoided by strengthening the couplers of such multi-bolts assemblies.To achieve this,a novel threaded coupler system with an expansion shell was suggested in this paper.The newly designed coupler consists of a threaded tapered-plug-cumconnector with an expansion shell for connecting and tightening two standard rock bolts.An analytical model for evaluating the load distribution along the coupler subject to axial load was derived.Numerical analysis was performed to analyse the load transfer,deformation,and strains across the coupler including the factor of safety for the bolt-coupler-resin and bolt-coupler-expansion shell.The results validated the analytical model of the proposed coupler design,which provides better anchorage near the interface of the host rock mass.Thus,the developed coupler design would reduce the failures of the proposed coupler and stabilize laminated roof strata above the medium-thick coal seams in underground mines.

Three-Dimensional Collapse Analysis for a Shallow Cavity in Layered Strata Based on Upper Bound Theorem

Layered rock strata are observed to be common during the excavation of tunnels or cavities,and may significantly affect the deformation and failure characteristics of surrounding rock masses due to various complex forms and mechanical properties.In this paper,we propose a three-dimensional axisymmetric velocity field for roof collapse of shallow cavities in multi rock layers,by considering the influences of roof cross-section shapes,supporting pressure,ground overload,etc.The internal energy dissipation rate and work rates of external forces corresponding to the velocity field are computed by employing the Hoek-Brown strength criterion and its associated flow rule.Further,the equations of the collapse surfaces and the corresponding weight of collapsing rock masses are derived on the basis of upper bound theorem.Furthermore,we validate the proposed method by comparing the results of numerical calculations and existing research findings.The change laws of the collapse range under varying parameters are obtained for the presence of rectangular and spherical cavities.We also find that the three-dimensional mechanism is relatively safer for engineering designing actually,compared with the traditional two-dimensional mechanism.All these conclusions may provide workable guidelines for the support design of shallow cavities in layered rock strata practically.

Unsymmetrical load effect of geologically inclined bedding strata on tunnels of passenger dedicated lines

In order to study the unsymmetrical load effect in geological bedding strata for the Muzhailing tunnel on the Lanzhou-Chongqing passenger dedicated line in China, we investigated the deformation, mechanical response and pressure of the surrounding rock and the mechanical characteristics of bolts of the tunnel. The results suggest that open zones appear at arch and invert where joints open up, when layered stratum is horizontal, or when the dip angle of in- clined bedding is small. Open zones occur perpendicular to a joint. The failure mode is bending disjunction at the arch tain shear displacement, and lead to obvious geological bedding unsymmetrical load. The failure mode is shear damage. For the joint dip angle in the range of 75-90°, the failure mode is flexural crushing at the wall and vertical shear rup- ture above the arch. The restraining effect of two sides weakens for vertical dip. On the whole, shear failure instabilitytrend would occur and the tunnel collapses evenly. When the angle between the bolt and structure plane is greater than 23°, bolts can enhance the shearing stiffness of joint plane. Unfortunately, in the general purpose graph of tunnel for 250 km/h of passenger dedicated lines, the bolts have equal length and spacing. The rationale behind this is worthy offurther study. For inclined bedding, the surrounding rock pressure at the left wall is more than that at the right wall. In addition, lining is likely to be damaged at left shoulder and side wall. With the dip angle increasing, the unsymmetrical load gradually achieves symmetry. Asymmetry design for support is recommended to reduce the unsymmetrical load on lining disturbed by excavation.

Stratigraphic Correlation And Division of the Salite Strata

1 Introduction Stratigraphic correlation is the most important basic work in oil and gas exploration and development,Scientific and reasonable stratigraphic correlation is the premise of developing fine reservoir description,and it is