Here,the influence of grinding media with different shapes on the flotation performance of spodumene and its potential mechanism from microscale insights was investigated using a single mineral flotation experiment,X-...Here,the influence of grinding media with different shapes on the flotation performance of spodumene and its potential mechanism from microscale insights was investigated using a single mineral flotation experiment,X-ray diffraction(XRD)test,scanning electron microscopy combined with energy dispersive spectrometry(SEM-EDS),atomic force microscope(AFM)and X-ray photoelectron spectroscopy(XPS).The flotation data indicated that under anionic/cationic(sodium oleate(NaOL)/DDA)collectors system,the rod milled spodumene has a higher floatability than ball milled ones.XRD results confirmed that rod medium makes spodumene exposed more{110}and{100}planes,while ball medium makes spodumene exposed more{010}planes.The typical anisotropic surface of spodumene makes the surface of rod milled spodumene possess more Al sites,further confirmed by SEM-EDS and XPS results.Additionally,it was found that the rod milled spodumene presents a larger value of elongation and flatness,which are parameters closely related to bubble adhesion.AFM analysis indicated that rod milled products have a rougher surface,while ball milled products have a smoother surface.Consequently,the rod medium enhanced the adsorption of NaOL/DDA on the spodumene surfaces.This work provides theoretical guidance for optimizing the separation of spodumene from the perspective of grinding.展开更多
Ultra fine grinding of the plant tailings of a refractory silver ore was studied using a laboratory type vertical stirred media mill. Preliminary tests confirmed that ultra fine grinding substantially improves the ext...Ultra fine grinding of the plant tailings of a refractory silver ore was studied using a laboratory type vertical stirred media mill. Preliminary tests confirmed that ultra fine grinding substantially improves the extraction of silver from the tailings in cyanide leaching （i.e. 36% Ag extraction rate from the as-received tailings with d80 of 100 μm, c.f. 84% extraction rate after ultra fine grinding of the tailings with ds0 of 1.2 pro）. In the ultra fine grinding tests, the effects of ball diameter （2-4.5 mm）, stirring speed （200-800 r/m/n） and ball charge ratio （50%-80%） on the fineness of grind （ds0, ~tm） were investigated through a Box-Behnken design. Increasing stirrer speed and ball charge ratio decreased fineness of grind while larger balls resulted in the coarser products. The tests demonstrated that a fineness of grind less than 5 μm can be achieved under suitable conditions. Analysis of stress intensity indicated an optimum range of stress intensity of （0.8-2）× 10^- 3 μm for all power inputs.展开更多
This study has been done to determine the galvanic interaction between five types of grinding media (mild steel, cast iron, 10% chromium, 20% chromium, and ceramic media) and galena, in situ of the mill. The ceramic m...This study has been done to determine the galvanic interaction between five types of grinding media (mild steel, cast iron, 10% chromium, 20% chromium, and ceramic media) and galena, in situ of the mill. The ceramic media has a significantly not galvanic interaction with galena and high chromium media has a significantly weaker galvanic interaction with galena, and produces a very much lower amount of oxidize iron species in the mill discharge than mild steel medium. The investigation of the various reactions occurring on the galena surface was investigated by ethylene diamine-tetra acetic acid disodium salt (EDTA) extraction and X-ray photoelectron spectroscopy (XPS) measurements. The floatability of galena is dependent on the galvanic current between grinding media and galena during grinding because the current is relative to the amount of iron oxidation species and the reduction rate on galena. Iron oxidation species depressed galena flotation. The optimum galena flotation was achieved by selecting grinding conditions that enabled iron oxidation to be controlled.展开更多
基金supported by the National Natural Science Foundation of China(Nos.51922091,51674207,and 52004337)the Sichuan Science and Technology Program(Nos.2019YFS0453,2018JY0148 and SYZ202074).
文摘Here,the influence of grinding media with different shapes on the flotation performance of spodumene and its potential mechanism from microscale insights was investigated using a single mineral flotation experiment,X-ray diffraction(XRD)test,scanning electron microscopy combined with energy dispersive spectrometry(SEM-EDS),atomic force microscope(AFM)and X-ray photoelectron spectroscopy(XPS).The flotation data indicated that under anionic/cationic(sodium oleate(NaOL)/DDA)collectors system,the rod milled spodumene has a higher floatability than ball milled ones.XRD results confirmed that rod medium makes spodumene exposed more{110}and{100}planes,while ball medium makes spodumene exposed more{010}planes.The typical anisotropic surface of spodumene makes the surface of rod milled spodumene possess more Al sites,further confirmed by SEM-EDS and XPS results.Additionally,it was found that the rod milled spodumene presents a larger value of elongation and flatness,which are parameters closely related to bubble adhesion.AFM analysis indicated that rod milled products have a rougher surface,while ball milled products have a smoother surface.Consequently,the rod medium enhanced the adsorption of NaOL/DDA on the spodumene surfaces.This work provides theoretical guidance for optimizing the separation of spodumene from the perspective of grinding.
文摘Ultra fine grinding of the plant tailings of a refractory silver ore was studied using a laboratory type vertical stirred media mill. Preliminary tests confirmed that ultra fine grinding substantially improves the extraction of silver from the tailings in cyanide leaching （i.e. 36% Ag extraction rate from the as-received tailings with d80 of 100 μm, c.f. 84% extraction rate after ultra fine grinding of the tailings with ds0 of 1.2 pro）. In the ultra fine grinding tests, the effects of ball diameter （2-4.5 mm）, stirring speed （200-800 r/m/n） and ball charge ratio （50%-80%） on the fineness of grind （ds0, ~tm） were investigated through a Box-Behnken design. Increasing stirrer speed and ball charge ratio decreased fineness of grind while larger balls resulted in the coarser products. The tests demonstrated that a fineness of grind less than 5 μm can be achieved under suitable conditions. Analysis of stress intensity indicated an optimum range of stress intensity of （0.8-2）× 10^- 3 μm for all power inputs.
文摘This study has been done to determine the galvanic interaction between five types of grinding media (mild steel, cast iron, 10% chromium, 20% chromium, and ceramic media) and galena, in situ of the mill. The ceramic media has a significantly not galvanic interaction with galena and high chromium media has a significantly weaker galvanic interaction with galena, and produces a very much lower amount of oxidize iron species in the mill discharge than mild steel medium. The investigation of the various reactions occurring on the galena surface was investigated by ethylene diamine-tetra acetic acid disodium salt (EDTA) extraction and X-ray photoelectron spectroscopy (XPS) measurements. The floatability of galena is dependent on the galvanic current between grinding media and galena during grinding because the current is relative to the amount of iron oxidation species and the reduction rate on galena. Iron oxidation species depressed galena flotation. The optimum galena flotation was achieved by selecting grinding conditions that enabled iron oxidation to be controlled.
