Comparison of isotope-based linear and Bayesian mixing models in determining moisture recycling ratio

Stable water isotopes are natural tracers quantifying the contribution of moisture recycling to local precipitation,i.e.,the moisture recycling ratio,but various isotope-based models usually lead to different results,which affects the accuracy of local moisture recycling.In this study,a total of 18 stations from four typical areas in China were selected to compare the performance of isotope-based linear and Bayesian mixing models and to determine local moisture recycling ratio.Among the three vapor sources including advection,transpiration,and surface evaporation,the advection vapor usually played a dominant role,and the contribution of surface evaporation was less than that of transpiration.When the abnormal values were ignored,the arithmetic averages of differences between isotope-based linear and the Bayesian mixing models were 0.9%for transpiration,0.2%for surface evaporation,and–1.1%for advection,respectively,and the medians were 0.5%,0.2%,and–0.8%,respectively.The importance of transpiration was slightly less for most cases when the Bayesian mixing model was applied,and the contribution of advection was relatively larger.The Bayesian mixing model was found to perform better in determining an efficient solution since linear model sometimes resulted in negative contribution ratios.Sensitivity test with two isotope scenarios indicated that the Bayesian model had a relatively low sensitivity to the changes in isotope input,and it was important to accurately estimate the isotopes in precipitation vapor.Generally,the Bayesian mixing model should be recommended instead of a linear model.The findings are useful for understanding the performance of isotope-based linear and Bayesian mixing models under various climate backgrounds.

Efficient heavy metal recycling and water reuse from industrial wastewater using new reusable and inexpensive polyphenylene sulfide derivatives

Heavy metal(HM)pollution is a serious environment problem.Recovering HM from industrial wastewater by efficient adsorbents is a sustainable method due to recycling HM and acquiring reusable water.However,popular efficient adsorbents are usually expensive or non-reusable.In this paper,methods of efficient HM recycling and water reuse from industrial wastewater were developed using efficient adsorbents,new polyphenylene sulfide derivatives,which are recyclable and stable in an acidic,alkaline or oxidative aqueous solution.Moreover,they can efficiently and quickly adsorb HM ions.The maximum adsorption capacities of these adsorbents for HM ions are at the range from 51.3-184.2 mg·g^(-1).The adsorption equilibrium times of them for HM ions are at the range from 10 to 80 min.Therefore,this paper suggests sustainable methods of HM recovery and water reuse from industrial wastewater.

Effect of impurities in recycling water on Pb-Ag anode passivation in zinc electrowinning process

Effect of impurities in recycling water on Pb-Ag anode passivation in zinc electrowinning process was investigated by linear scan voltammetry.Results show that passivation process would be affected in the presence of Cl^-and F-in recycling water.It was highly advantageous to take H2SO4 concentration as 180g/L,Mn^2＋ concentration as 3-5 g/L and F-less than 42mg/L.However,passivation process would not be affected when Cl^-concentration was less than 13mg/L without any other ions,or when mass ratio of Mn^2＋ to Cl^-existing in electrolyte was 8,where Cl^-concentration could reach up to 625mg/L.

High-Throughput Pb Recycling for Perovskite Solar Cells Using Biomimetic Whitlockite

Pb contamination in aquatic environments causes severe pollution;therefore,harmless absorbents are required.In this study,we report a novel synthesis of whitlockite(WH,Ca_(18)Mg_(2)(HPO_(4))_(2)(PO_(4))_(12)),which is the second most abundant biomineral in human bone,and its application as a high-performing Pb^(2+)absorbent.Hydroxyapatite(HAP)and WH are prepared via a simple precipitation method.The Pb2+absorption performance and mechanism of the synthesized biominerals are investigated in aqueous solutions at neutral pH.The results demonstrate that WH exhibits an excellent Pb2+absorption capacity of 2339 mg g^(−1),which is 1.68 times higher than the recorded value for HAP.Furthermore,the absorbed Pb^(2+) ions are recycled into high-purity PbI_(2).This is employed as a precursor for the fabrication of perovskite solar cells(PSCs),resulting in a conversion efficiency of 19.00%comparable to that of commercial PbI2 powder(99.99%purity).Our approach provides an efficient way to remove Pb^(2+)ions from water and reuse them in the recycling of PSCs.

Recycling water glass from wet reclamation sewage of waste sodium silicate-bonded sand

Wet reclamation of waste sodium silicate-bonded sand produces much alkaline sewage and causes pollution. Recycling water glass from wet reclamation sewage of the waste sodium silicate-bonded sand can solve pollution issues and generate economic benefits. In this work, the wet reclamation sewage was filtered, and the filtrate was causticized with a quicklime powder to produce a lye. The effects of causticization temperature, causticization time, and the amount of quicklime powder on the causticization rate were studied. The lye was used to dissolve the silica in the filtration residue to prepare a sodium silicate solution. The effects of the mass of filtration residue, dissolution temperature, and dissolution time on sodium silicate modulus were studied. Finally, the recycled water glass was obtained by concentrating the sodium silicate solution, and the bonding strength of the recycled water glass was tested. The results showed that the causticization rate could be improved by increasing the amount of quicklime powder, causticization temperature, and causticization time, and the highest causticization rate was above 92%. Amorphous silica in the filtration residue dissolved in the lye. Increasing the amount of the filtration residue, dissolution temperature, and dissolution time could improve the sodium silicate modulus. The bonding strength of the recycled water glass was close to that of commercial water glass. The recycled water glass could be used as a substitute for the commercial water glass.

Analysis on the Interaction of Parameters of Single-contaminant Regeneration Recycling Water Systems

Method for constructing the optimal water supply line and formulas for calculating the targets for single-contaminant regeneration recycling water systems are improved to apply to the situation of variational pararneters in this article. Based on these extending methods, the effect of varying freshwater consumption and regenerated water flow rate on the optimizing results are investigated. The interactions of parameters of regeneration recycling systems are summarized. Finally, all the conclusions are illustrated from the results of mathematical programming through an example.

Monte Carlo Simulation-based Decision-making Model for the Water Conservation and Intermediate Water Recycling of Conservationminded Buildings

Through analyzing the life cycle cost of the water conservation and intermediate water application project of conservation-minded buildings,net present value(NPV) was applied as the index to establish the life cycle economic decision-making model.Monte Carlo simulation was used in demonstration cases,modeling analysis of water-saving projects in conservation-minded and traditional buildings verified rationality and practicability of this model and simulation method.It was to provide a referential and operable method for the decision-making of conservation-minded construction projects,as well as a scientific approach and theoretic basis for the precise decision-making of government organs,decision-making departments and developers.

Performance of recycling abrasives in rock cutting by abrasive water jet

Rock cutting performance of recycling abrasives was investigated in terms of cutting depth, kerf width, kerf taper angle and surface roughness. Gravity separation technique was employed to separate the abrasives and the rock particles. The recycling abrasive particles were then dried and sieved for determination of their disintegration behaviors. Before each cutting with recycling abrasives, the abrasive particles less than 106 ?m were screened out. It is revealed that a considerable amount of used abrasives can be effectively reused in the rock cutting. The reusabilities of abrasives are determined as 81.77%, 57.50%, 34.37% and 17.72% after the first, second, third and fourth cuttings, respectively. Additionally, it is determined that recycling must be restricted three times due to the excessive disintegration of abrasives with further recycling. Moreover, it is concluded that cutting depth, kerf width and surface roughness decreases with recycling. No clear trend is found between the kerf taper angle and recycling. Particle size distribution is determined as an important parameter for improving the cutting performance of recycling abrasives.

Analysis of Gray Water Recycling by Reuse of Industrial Waste Water for Agricultural and Irrigation Purposes

Isfahan industrial province with its numerous industrial estates in its area and consequently the amount of wastewater produced by these settlements is very difficult to deal with.Therefore,the need for proper wastewater treatment and efficient management of industrial waste water from the industrial estates of this province should be seriously addressed and followed up by the authorities.The purpose of this study is the feasibility of reuse of wastewater from industrial settlements for agricultural and irrigation purposes.The present study is a descriptive cross-sectional study.In this study,the average values obtained from the sampling and the results of the experiments on waste water from the industrial waste water treatment plant in Isfahan,2017,have been used.Average values of BOD5,COD,TSS and so on were compared with the standards set by the Environmental Protection Agency and analyzed in Excel software.According to the results,the average values of COD,BOD5,TSS,SO4,pH and catalyst quality parameters were determined from wastewater effluents of 315,162,93,164(mg/L),8.3 and 32.5(NTU)respectively.The results of the study show that the average values of the quality parameters examined from the effluent of the treatment plant other than BOD5 and COD are within the standard range and the limit for agricultural and irrigation purposes,which may lead to undesirable environmental performance of these two parameters.

Modelling the water diversion of a sustainable cover system under humid climates

Extreme rainfall significantly threatens the safety of the landfill cover system,especially under humid climates.This study aims to provide design recommendations for a sustainable landfill cover system consisting of a low-permeability soil layer underlying a two-layer capillary barrier for humid climates.First,the numerical back-analysis was conducted for verification against a series of flume model tests.Then,a parametric study was performed to investigate the effects of inclination angle,particle size and layer thickness on the lateral diversion length(DL)of the three-layer cover system under the 100-year return period rainfall of humid climates.The results show that the water lateral DL of the cover system can be greatly enhanced by increasing the inclination angle from 3°to 18°.Moreover,the bottom layer of the cover system with a coarser d10 was more susceptible to the impact of the heavy rainfall,while this can be alleviated by increasing the thickness of the bottom layer.A dimensionless number,defined as the ratio of thickness and d_(10) of the bottom layer,is proposed for designing lateral diversion of the three-layer cover system under humid climates.To preserve the maximum DL,it is suggested that the proposed dimensionless number should be larger than 95 and 110 for the design of rainfall events with 50-year and 100-year return periods for humid climates,respectively.

Implications of de Facto Reuse on Future Regulatory Developments for Beaufort-Jasper Water & Sewer Authority in Okatie, South Carolina, USA

A significant portion of the national water supply can be attributed to de facto or unplanned potable reuse, though the extent of its contribution is difficult to estimate. Fortunately, the contribution of Water Resource Recovery Facility (WRRF) effluent to waters that supply drinking water treatment plants has been documented by some communities. In the United States (US), among the top 25 most impacted drinking water treatment plants by upstream WRRF, 16% of the influent flow to the drinking water treatment plant under average streamflow and up to 100% under low-flow conditions is WRRF effluent. Currently, the full extent of de facto reuse in the US may be much higher because of population growth. The scenario is no different for Beaufort-Jasper Water and Sewer Authority (BJWSA) in South Carolina, US, with contributions to the Savannah River originating from numerous WRRF and other upstream dischargers. South Carolina coastal utilities such as BJSWA are considering direct and indirect potable reuse options, driven by disposal limitations and challenges. Currently, South Carolina does not have a framework, guidelines, or regulations for reuse, but discussions have started among the regulated community. In addition to understanding the extent of de facto reuse, the state will need to develop standards and best practices to enable future adoption of planned potable reuse solutions to water resources challenges. Such guidance should address human health risk management and technical considerations regarding treatment in addition to other factors, including source control, storage, fail-safe operation, monitoring, non-cost factors, and public acceptance. This study conducted a mapping assessment specific to BJWSA, sampled at four locations on Savannah River, and observed that de facto reuse is approximately 4.6% to 5.9% during low-flow months and is within the range generally observed nationwide. When coupled with evidence that planned potable reuse can improve human health and environmental risks, this practice is a meaningful option in the water supply portfolio for many utilities.

Influence of Wetland Self-purification Capacity on the Utilization of Water Resources——A Case Study of the Project for Recycling Yanshan River Water

[ Objective] The study aims to resolve water resource problem availably. [ Method] On the basis of wetland self-purification capacity, Yanshan River water was purified by Xixi Wetland, and the feasibility of using treated Yanshan River water for urban greening and watering road was analyzed. [Result] Compared with direct utilization of tap water, it is more economic to recycle Yanshan River water purified by Xixi Wetland for urban greening and watering read, with obvious economic, ecological and social benefits, so it is an effective method to address shortage of water resources and is worth spreading. [ Conclusion] It is feasible to use Yanshan River water purified by Xixi Wetland for urban greening and watering read.

The Effects of Water Recycling on Flotation at a North American Concentrator—Part 1

Water chemistry and its impact on mineral processing operations are not well understood and often not adequately monitored. CanmetMINING, as part of its water management research program, has been involved in a project initiated to identify opportunities for improving water recovery, water treatment, and recycling in the mining and mineral processing operations. One of the main objectives of this work is to evaluate and assess water chemistry and identify factors that impact mineral recovery, concentrate grade, and metal extraction efficiencies in order to understand and mitigate negative impacts of water recycling and improve process efficiency. In collaboration with a North American concentrator, CanmetMINING has been involved in assessing the water chemistry in the mill and evaluating water recycling options for select process streams to reduce fresh water intake and maximize recycling. The overall goal of the project is to investigate options for water recycling (increase the thickener overflow recirculation from thickener overflow tank) without affecting nickel and copper metallurgy. The results of the sampling campaigns showed that the water chemistry of the streams was fairly consistent throughout the year with no significant seasonal variations. The laboratory tests illustrated that when higher quantities of thickener overflow from thickener overflow were used, the nickel + copper grade versus nickel recovery curves shifted towards lower values. These observations were observed for the plant water samples obtained in April, June and August 2019.

Innovative Technologies for Large-Scale Water Production in Arid Regions: Strategies for Sustainable Development

Water scarcity in arid regions poses significant challenges to sustainable development and human well-being. This article explores both existing and innovative technologies and methods to produce large amounts of water to address these challenges effectively. Key approaches include atmospheric water generation, advanced desalination techniques, innovative water collection methods such as fog nets and dew harvesting, geothermal water extraction, and water recycling and reuse. Each method is evaluated for its feasibility with existing technology, potential time of implementation, required investments, and specific challenges. By leveraging these technologies and combining them into a multifaceted water management strategy, it is possible to enhance water security, support agricultural and industrial activities, and improve living conditions in arid regions. Collaborative efforts between governments, private sector entities, and research institutions are crucial to advancing these technologies and ensuring their sustainable implementation. The article provides a comprehensive overview of the current state of these technologies, their potential for large-scale application, and recommendations for future research and development.

Recycling valuable cobalt from spent lithium ion batteries for controllably designing a novel sea-urchin-like cobalt nitride-graphene hybrid catalyst: Towards efficient overall water splitting

Along with the continuous consumption in lithium-ion batteries (LIBs), the price of cobalt is inevitably going up in recent years. Therefore, recycling valuable Co element from spent devices, and boosting its service efficiency are becoming two indispensable approaches to promote the utilization of Co in various energy conversion/storage devices. Herein, we realize the recovery of Co from spent LIBs and synthesize a three–dimensional (3D) sea-urchin-like cobalt nitride composite material (labeled as CoN-Gr-2), which is used as a bi-functional catalyst for water splitting. Benefiting from the intrinsic high conductivity, larger surface area and unique 3D sea–urchin–like architecture, CoN-Gr-2 shows an excellent electron transfer efficiency, highly exposed active sites as well as the superior mass transport capacity. The CoN-Gr-2 catalyst exhibits low overpotentials of 128.9 mV and 280 mV for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), which are comparable to the commercial 20 wt% Pt/C and RuO_(2) catalysts. Moreover, when adopting CoN-Gr-2 as both anode and cathode materials for overall water splitting (in 1.0 M KOH electrolyte), the assembled cell achieves a current density of 10 mA cm^(−2) at 1.61 V, which almost close to that of Pt/C||RuO_(2) benchmark (1.60 V), demonstrating its superior water-splitting efficiency. Meanwhile, the CoN catalysts exhibit strong chemical interaction with the Gr support, suppressing the aggregation of CoN catalysts and maintains their high activity during HER and OER reactions. So, the cell exhibits a high current retention of 97.3% after 40 h. This work successfully develops an industrial chain from recycling Co wastes in spent energy devices to controllably designing 3D sea-urchin-like CoN-Gr with high water splitting efficiency. Therefore, it could further promote the efficient utilization of valuable Co element in various energy devices.

A Preliminary Study on Cactus as Flocculants in Water Recycling from Moroccan Phosphates Schlamms

In this work we used a new organic biodegradable flocculants which is the cactus cladodes juice in order to recycle water from phosphate schlamms. This flocculants has enabled us to increase the settling velocity of the schlamms so consequently the water recycled degree. The study was conducted on an industrial sample of phosphates schlamms from Khouribga phosphates washing plant. The study was about the influence of concentration, pH, and velocity gradient with cactus extract leads to satisfactory results in term of settling decantation, and in water recycling degree which is 93%.

Synthesis and Scheduling of Optimal Batch Water-recycle Networks

This work develops an optimization-based methodology for the design and scheduling of batch water recycle networks. This task requires the identification of network configuration, fresh-water usage, recycle assignments from sources to sinks, wastewater discharge, and a scheduling scheme. A new source-tank-sink representation is developed to allow for storage and dispatch tanks. The problem is solved in stages by first eliminating scheduling constraints and determining minimum usage of fresh water and wastewater discharge. An iterative procedure is formulated to minimize the total annual cost of the system by trading off capital versus operating costs. The work overcomes limitations in previous literature work including restricted recycle within the same cycle, lumped balances that may not lead to feasible solutions, and unrealistic objective functions. A case study is solved to illustrate the usefulness of the devised procedure.

Modelling and development of recycled water conditioning of copper-molybdenum ores processing

Current use of enrichment and processing technologies of ores requires the introduction of closed circuits of water treatment. A decrease in technological properties is caused by accumulations of ion-molecular components in the circulating water. The objective of the simulation is to determine the maximum allowable concentrations of ions and molecules as well as the choice of conditions for deposition or adsorption.First of all, our examinations decrease the concentration of copper ions and fatty acids in the circulating water. By pre-mixing water with the highest concentration of these ions, a reduction of copper ion and fatty acid concentrations in the recycled water occurs. The results do not only ensure the achievement of the maximum permitted concentration(MPC) of copper and iron, significantly reducing the amount of oxidized copper, they also make it possible to use the united sewage as current water for the flotation process. Mixing and adding filtrate of tailings, discharges of urban wastewater treatment and effluent of ash pit of thermal power stations(TPS) to recycled water causes an increase in the capacity of the enrichment plant by 15–17%.

Enhanced treatment of water with low turbidity:Combined effects of permanganate, PAM and recycled sludge

The effectiveness of enhancing treatment of water with low turbidity through combined effects of permanganate oxidation, PAM aiding coagulation and sludge recycling was investigated through continuous bench scale studies. In comparing with ferric chloride coagulation, only recycling sedimentation sludge was ineffective in enhancing treatment of water with low turbidity. PAM with recycled sludge showed positive effects, and the additional permanganate dosing exhibited the best potential of favoring coagulation, which leaded to much lower effluent turbidity and CODMa. Additionally, it was observed that the optimal permanganate dosage was 0. 4 mg/ L and the higher permanganate dosage exhibited inhibiting effects for pollutants removal. SEM analysis indicated that the floes were loosely formed and the particle diameter was critically low for ferric chloride coagulation process. Comparatively, the addition of PAM and permanganate with recycled sludge facilitated the aggregation of tinny particles onto compact PAM polymer chains, therefore contributing to the formation of compact floes with high particle diameter. The combined employment of recycled sludge, PAM and permanganate showed the best potential of favoring coagulation, mainly through synergistic effects between seeding, polymer bridging and increasing effective collision in mechanism. Additionally, the variation of Fe and Mn concentration after recycling and sedimentating units was studied for the processes, and the main species was also investigated for elements Fe and Mn. Sludge recycling and permanganate addition did not increase Fe and Mn concentration in the sedimented water.

Additional water use influencing strength and fluidity of recycled concrete

Through adding different additional water use,the compressive strength,splitting tensile strength and fluidity of recycled concrete of three aggregate combination forms were studied by experiment respectively.The experimental results show that with the increase of adding additional water use,the compressive strength and splitting tensile strength of recycled coarse aggregate concrete decrease,but that of recycled fine aggregate concrete and recycled all aggregate concrete increase firstly then decrease.When additional water use is added more 15% or 20% than that of basic ordinary concrete,the recycled coarse aggregate concrete and fine one can get pretty good fluidity.When it is added more 30%,the recycled all aggregate concrete has fluidity that is just satisfied.