Synthesis and Characterization of Nonionic Waterborne Polyurethane and Application to Wool Fabric Finishing

A nonionic waterborne polyurethane(WPU) was synthesized by the self-emulsification method using polyether diol(N220),isophorone diisocyanate(IPDI),trimethylolpropane poly(ethylene glycol monomethyl ether)(N120),1,4-butanediol(BDO) and trimethylolpropane(TMP) as the main materials.The effects of the NCO/OH ratio on the emulsion and film properties of NWPU were explored.The experimental results show that the NWPU prepared at an NCO/OH ratio of 1.1 has good emulsion stability and easy film formation,and the resultant film was elastic,soft,and transparent.The sample was used for wool finishing and the application performance was evaluated.When the NWPU dosage reached 40 g·L^(-1),the fabric area felt shrinkage rate reduced from 8.97% to 4.75%,the pilling rating raised from grade 2-3 to grade 4,and the whiteness value only decreased by 3.87%.

Remediation of oily soil using acidic sophorolipids micro-emulsion

A sophorolipids(SLs)micro-emulsion in Winsor type Ⅰ form was used for crude oil contaminated soil washing treatment.The micro-emulsion shows higher oil removal rate than SLs aqueous solution and diesel oil.The type Ⅰ micro-emulsion with w(SLs)=6%,w(NaCl)=1%,w(diesel)=13.36% gave a high oil removal rate of 95.6% and the eluate remained in type Ⅰ state.The recovered oil showed lower viscosity,mainly caused by the entering of diesel from the micro-emulsion phase into the oil phase and the lower removal rate of the heavier components,such as the resin and asphaltene.The initial heavily saline-alkaline soil changed into mildly saline-alkaline state after washing treatment,favoring the germination and growth of plants,with ryegrass showing better germination and growth effect than alfalfa.The ryegrass showed good phytoremediation effect on the contaminated soil after SLs micro-emulsion washing.The combination process of SL micro-emulsion washing and ryegrass phytoremediation is prospective for oily soil treatment.

Influence of nonionic surfactant on the solubilization and biodegradation of phenanthrene

Phenanthrene was solubilized in two different nonionic surfactants, Tween80 and Triton X-100. The bioavailability of phenanthrene to the bacteria isolated from the petroleum contaminated soils was studied based on the rotary flasks experiments. The results showed that the concentration of nonionic surfactants above the critical micelle concentration(CMC) can increase the solubility of phenanthrene in water and were innoxious to the phenanthrene-degrading bacteria; phenanthrene solubilized in the micelles of Tween80 was bioavailable and biodegradable. The research demonstrated the potential of surfactant-enhanced bioremediation of soils contaminated by hydrophobic organic compounds(HOCs).

Estimation and Prediction of Bioconcentration Factors of Nonionic Organic Chemicals in Fish by Electrotopological State Indices and Structural Parameter

Based on the characteristics of atom types, Hall＇s electrotopological state indices （En） are calculated for 165 nonionic organic compounds. On the basis of the characteristics of substituent and conjugated matrix, a novel molecular structure parameter （G） is defined and calculated for 165 molecules in this paper. En and G show good structural selectivity for organic molecules. G, a satisfactory relationship between bioconcentration factor （BCF） and En, is expressed as： 1gBCF = -0.283 ＋ 1.246G ＋ 0.079E42 ＋ 0.351E9- 0.063E17 （n＇ = 122, R = 0.967, F = 425.636, s = 0.394）, which could provide estimation and prediction for the lgBCF of nonionic organic chemicals. Furthermore, the model is examined to validate overall robustness with Jackknife tests, and the independent variables in model do not exist cross correlation with VIF. All these regression results show that the new parameter G and electrotopological state index have good rationality and efficiency. It is concluded that the En and G will be used widely in quantitative structure-property/activity relationship （QSPR/QSAR） research.

Effect of nonionic surfactants in release media on accelerated in-vitro release profile of sirolimus eluting stents with biodegradable polymeric coating

It is a well-known fact that sirolimus(SRL) undergoes degradation process via hydrolysis in aqueous media, leading to incorrect assessment of drug amount and thus release characteristics of formulations.The main objective of the present study was to evaluate the effect of nonionic surfactants in media on invitro release profiles for sirolimus eluting stents(SES) coated with biodegradable polymeric matrix.Phosphate buffer and acetate buffer incorporating nonionic surfactants with varying concentrations were examined for adequate solubility and stability(by RP-HPLC). Good sink condition was achieved in phosphate buffer(at pH 4.0) with 1.0% Tween 20, 1.0% Brij 35% and 0.5% Brij 58. Hydrodynamic size(by DLS) and the micelle-water partition coefficient(P) with standard free energy of solubilization(ΔGs°) of drug were evaluated to get some understanding about the solubilization phenomena. About 80% of drug release during the period of 48 h was achieved in optimized drug release media which was 1.0% Tween20 in phosphate buffer pH 4.0. The obtained accelerated SRL release profile in optimized medium correlated well with the real time in-vitro release in phosphate buffer(pH 7.4). Surface morphology changes(by SEM), changes in gravimetric weights and molecular weight change(by GPC) were examined before and after drug release to understand the drug release mechanism which explains that the polymer did not undergo degradation during the drug release.

Effect of monovalent anions on cationic Gemini micro-emulsion

Micro-emulsion usually consists of water, oil, surfactants and co-surfactants, and each component has an effect on the phase behavior and solubilization of the micro-emulsion. When the surfactant in the micro-emulsion system is quaternary ammonium cationic Gemini surfactant, the surfactant mainly combines with the anions in the salt. With the increase of salt concentration, the phase transformation of Winsor I → Winsor III → Winsor II occurred, but the optimum salinity and salt width are different because of the type of salt. The effects of 5 different kinds of monovalent anions, including C_6H_5SO_3^-, I-, Br-, NO_3^- and Cl-, on the phase behavior and solubilization of quaternary ammonium cationic Gemini micro-emulsion are researched by Winsor phase diagram. It is found that the effects of organic anions C_6H_5SO_3-and I-on the phase behavior and solubilization of quaternary ammonium cationic Gemini micro-emulsion are most significant, and the effects of Br-, NO_3^- and Cl-are less significant. Meanwhile, when the optimum solubilization is achieved, the amount of sodium benzoate is the least, indicating that the organic anion has stronger self-organization behavior with quaternary ammonium cationic Gemini surfactants.

Remediation of diesel oil contaminated sand by micro-emulsion

Micro-emulsion has unique advantages in repairing diesel oil contaminated sand due to its low interfacial tension and strong solubility.By Winsor phase diagram,it was found that with the increase of salinity,the phase of microemulsion transformed from WinsorⅠto WinsorⅢto WinsorⅡ.Under cryogenic electron microscope,it was observed that WinsorⅠwas O/W type,WinsorⅡwas W/O type,and WinsorⅢtype was bi-continuous type.The effect of inorganic salts,alcohol and temperature on the oil removal rate of diesel oil contaminated sand was investigated by static recovery of micro-emulsion precursor.The results showed that for the anionic microemulsion system,with the increase of salinity and alcohols,the oil yield of the upper phase increased first and then decreased,and the two components had a certain compensation effect.For non-ionic micro-emulsion system,with the increase of temperature,the oil yield in the upper phase rose first and then decreased.At the same time,the influence of leaching conditions on oil removal rate was investigated by one-dimensional sand column leaching experiment.It was found that for diesel oil contaminated sand with 15%oil content,when the formulation was 2.00 wt%SDBS,4.05 wt%n-butanol and 0.40 wt%sodium chloride,the optimum leaching conditions were leaching rate of 4 ml·min-1 and leaching amount of 400 ml.Under such conditions,the oil removal rate was up to 82.84%,that is,the oil content of the sand was reduced to 2.57%.Moreover,the micro-emulsion has good cyclicity,and it can still achieve high oil yield after six cycles.

Nonionic Polymerizable Emulsifier in High-Solids-Content Acrylate Emulsion Polymerization

Stable high-solids-content acrylate emulsion were obtained with a nonionic polymerizable emulsifier allyloxy nonylphenoxy poly （ethyleneoxy） （10） ether （ANPEO10）, and a conventional emulsifier OP-10 as a reference sample. 1H NMR proves that the polymerizable emulsifier ANPEO10 has been incorporated into the resulted acrylate polymers. TEM demonstrates that there are some differences in the particle morphologies. AFM proves that the polymerizable emulsifier ANPEO10 migrating to the surface of the emulsion film was much less than the conventional emulsifier OP-10. The polymerizable emulsifier ANPEO10 can enhance the adhesion with glass plate compared to the conventional emulsifier. Furthermore, with increasing amount of emulsifier, the surface free energy of the films first decreased and then increased, and the adhesion with glass plate is initially enhanced and then attenuated. The water-resistance and solvent-resistance of the films prepared by the polymerizable emulsifier ANPEO10 are superior to those prepared by the conventional emulsifier OP-10.

Interaction of nonionic surfactant AEO_9 with ionic surfactants

The interaction in two mixtures of a nonionic surfactant AEO9 (C12H25O(CH2CH2O)9H) and different ionic surfactants was investigated. The two mixtures were AEO9/sodium dodecyl sulfate (SDS) and AEO9/cetyltrimethylammonium bromide (CTAB) at molar fraction of AEO9, A EO9 α =0.5. The surface properties of the surfactants, critical micelle concentration (CMC), effectiveness of surface tension reduction (γCMC), maximum surface excess concentration (Γmax) and minimum area per molecule at the air/solution interface (Amin) were determined for both individual surfactants and their mixtures. The significant deviations from ideal behavior (attractive interactions) of the nonionic/ionic surfactant mixtures were determined. Mixtures of both AEO9/SDS and AEO9/CTAB exhibited synergism in surface tension reduction efficiency and mixed micelle formation, but neither exhibited synergism in surface tension reduction effectiveness.

Influence of Nonionic Surfactant Addition on Drag Reduction of Water Based Nanofluid in a Small Diameter Pipe

The goal of this research was to determine the impact of nonionic surfactants on drag reduction effect in water and metal oxide nanofluid. Two nonionic surfactants （Rokacet 07 and Rokanol KT） and copper（II） oxide wa- ter-based nanofluid were examined. Friction factors in a 4 mm diameter pipe for the Reynolds number between 8000 and 50000 were determined. Results showed that addition of nonionic surfactants caused the decrease of fric- tion factor in water and nanofluid. The drag reduction effect was similar in both cases. Presence of nanoparticles in the system has no great influence on drag reduction effect.

CALORIMETRIC STUDIES ON THE STRUCTURE OF MICROEMULSION WITH NONIONIC SURFACTANT

Enthalpic studies on the state of water in hex-adecane/hexanol/ AEO8/water system have been conducted. The results show that water exists in three states such as bound water,trap water and free water. The enthalpic effect of condition that water to oil ratio is in the abnormal rheology region, the negative thixotropy of the system is directly proportional to the enthalpy.

Studies on the Cloud Points of Nonionic Surfactants with QSPR

With quantum chemical parameters, topological indexes, and physical chemistry parameters as descriptors, a quantitative structure-property relationship（QSPR） has been found for the cloud points of four series of nonionic surfactants（ a total of 65 surfactants）. The best-regressed model includes six descriptors, and the correlation coefficient of multiple determination is as high as 0. 962.

Quantitative Structure-Property Relationship on Prediction of Surface Tension of Nonionic Surfactants

A quantitative structure-property relationship (QSPR) study has been made for the prediction of the surface tension of nonionic surfactants in aqueous solution. The regressed model includes a topological descriptor, the Kier & Hall index of zero order (KH0) of the hydrophobic segment of surfactant and a quantum chemical one, the heat of formation (fHD) of surfactant molecules. The established general QSPR between the surface tension and the descriptors produces a correlation coefficient of multiple determination, 2r=0.9877, for 30 studied nonionic surfactants.

Formation of macroporous gel morphology by phase separation in the silica sol-gel system containing nonionic surfactant

The phase separation and gel formation behavior in an alkoxy-derived silica sol-gel system containing C16EO15 has been investigated. Various gel morphologies similar to other sol-gel systems containing organic additives were obtained by changing the preparation conditions. Micrometer-range interconnected porous gels were obtained by freezing transitional structures of phase separation in the sol-gel process. The dependence of the resulting gel morphology on several important reaction parameters such as the starting composition, reaction temperature and acid catalyst concentration was studied in detail. The experimental results indicate that the gel morphology is mainly determined by the time relation between the onset of phase separation and gel formation.

Synthesis of Nonionic Oligomeric Manganese(Ⅱ) Complexes and Investigation of Their Toxicity andΤ_1-Relaxation Enhancement

Six nonionic oligomeric manganese （ Ⅱ ） complexes with oligomeric phosphate-polyglycol-EDTA ester ligands were synthesized and characterized. The longitudinal relaxivities of these complexes were measured. One of these complexes, which showed the highest relaxivity, was chosen to be used in the acute toxicity test and the T1-weighted imaging experiment. It has been found that compared to Gd-DTPA, this nonionic oligomeric Mn（ Ⅱ ） complex exhibits no acute toxicity, generates highly enhanced MRI signals and increases the intention time in the rat liver tissue.

Hydrodynamics and Mass Transfer of Oily Micro-emulsions in An External Loop Airlift Reactor

This study reports an experimental investigation on hydrodynamics and mass transfer characteristics in a 15.6x10-3 m3 external loop airlift reactor for oil-in-water micro-emulsions with oil to water volume ratio （φ） rang- ing from 3% to 7% （by volume）. For comparative purposes, experiments were also carried out with water. Increase in φ of micro-emulsion systems results in an increment in the gas holdup and a decrease in the volumetric gas-liquid oxygen transfer coefficient and liquid circulation velocity, attributed to the escalation in the viscosity of mi- cro-emulsions. The gas holdup and volumetric mass transfer coefficient for micro-emulsion systems are signifi- cantly higher than that of water system. Two correlations are developed to predict the gas holdup and oxygen trans- fer coefficient

Preparation and Field Application of a Novel Micro-emulsion as Heavy Oil Displacement Agent

A novel micro-emulsion was prepared by mixing an oil-soluble viscosity reducer,which was screened to aim at improving the heavy oil properties of Shengli oilfield with water-soluble surfactant and co-surfactant.The static viscosity reduction and oil washing performance of the micro-emulsion were investigated,and the field application of the microemulsion used as heavy oil displacement agent was also reported.Results showed that the micro-emulsion exhibited excellent viscosity reduction performance for the studied heavy oil samples.When heavy oil was mixed with 0.5%of the micro-emulsion,a stable oil-in-water heavy oil emulsion could be formed.After the content of the micro-emulsion was increased to 3.0%,the oil removing rate reached up to 80%.Field application of the micro-emulsion to the Pai-601-Ping-115 well and the Pai-601-Ping-123 well was shown to be effective by increasing the periodic oil production up to 203 tons.

Synthesis and Characterization of Copper Nanoparticles by Bis-(Acetylacetonato)-Copper (II) Using Nonionic Surfactants and the Effect of Their Structures on Nanoparticles Size and Yield

Between all precursors of copper complex, bis-(acetylacetonato)-copper (II) and bis-oxalate copper (II) with very close structures are two of the best representatives for copper nanoparticles synthesis. In this research, only bis-(acetylacetonato)-copper (II) in presence of some effective non-ionic surfactants such as Triton X-100, Dodecylamine, Tween 80 and also triphenylphosphine as a reducing agent via thermal decomposition process was used for copper nanopaticles synthesis. Two shif-base E19 and E22 complexes were also used for the investigation of these kinds of shif-base complexes capabilities by this method as precursors and all results were compared with each other. Between all surfactants, Triton X-100 gave the best yield with the largest grains. The techniques used for characterization of copper nanoparticles were TEM, EDX, FT-IR and XRD. TG-DTA and CV were used for characterization of bis-(acetylacetonato)-copper (II) complex.

PREPARATION AND STUDY ON SILICONE ACRYLATE MICRO-EMULSION OF MULTIPOLYMER

A silicone acrylate micro-emulsion of multipolymer was prepared by seed emulsion polymerization. The effects of polymerization process, emulsifier rate and amount, initiator rate and amount, polymerization temperature, functional monomers, titration time on performances of emulsion have been discussed in detail.

Synthesis and Surface Activity of Cashew-Based Anion-Nonionic Surfactants

Four novel anion-nonionic surfactants were synthesized using cashew phenol as raw material. The four structures were characterized by IR and elemental analysis. Their surface activities were investigated. Their critical micelle concentrations (CMC) are 9.30 × 10 –3 mol/L, 8.50 × 10–3 mol/L, 8.10 × 10–3 mol/L and 7.71 ×–3 mol/L respectively, and the corresponding surface tensions at CMC are 28.38 mN/m, 28.60 mN/m, 30.40 mN/m and 30.00 mN/m respectively. The contact angles of the solutions on sheet galsses were measured to observe their surface wettabilities. The effects of their concentrations, the concentrations of NaCl and temperature on their foaming capacity and foam stability were studied.