Nonlinear Dynamics Behaviors of a Rotor Roller Bearing System with Radial Clearances and Waviness Considered

A rotor system supported by roller beatings displays very complicated nonlinear behaviors due to nonlinear Hertzian contact forces, radial clearances and bearing waviness. This paper presents nonlinear bearing forces of a roller bearing under four-dimensional loads and establishes 4-DOF dynamics equations of a rotor roller bearing system. The methods of Newmark-β and of Newton-Laphson are used to solve the nonlinear equations. The dynamics behaviors of a rigid rotor system are studied through the bifurcation, the Poincar è maps, the spectrum diagrams and the axis orbit of responses of the system. The results show that the system is liable to undergo instability caused by the quasi-periodic bifurcation, the periodic-doubling bifurcation and chaos routes as the rotational speed increases. Clearances, outer race waviness, inner race waviness, roller waviness, damping, radial forces and unbalanced forces-all these bring a significant influence to bear on the system stability. As the clearance increases, the dynamics behaviors become complicated with the number and the scale of instable regions becoming larger. The vibration frequencies induced by the roller bearing waviness and the orders of the waviness might cause severe vibrations. The system is able to eliminate non-periodic vibration by reasonable choice and optimization of the parameters.

Effectof Film Force Nonlinearity on Unbalance Responseof a Jeffcot RotorJournal Bearing System

The effect of oil film force nonlinearity on unbalance response of Jeffcot rotor elliptical bearing system is studied. Linear analysis is done by linearizing the bearing oil film dynamic forces and expressing them with stiffness and damping constants. Nonlinear dynamic simulation is done by taking the nonlinearity of bearing oil film dynamic force into full consideration, with the latter being expressed by a special database which is generated beforehand, and based on non stationary Reynolds equation and Reynolds boundary condition of film rupture. The linear and nonlinear unbalance responses of a Jeffcot rotor supported on a pair of elliptical bearings is studied. The resulting dynamic characteristics and rotor and journal whirling orbits are compared. While good consistancy between nonlinear and linear predictions is found under very small unbalance, significant or even drastic differences are found whenever the unbalance is not small, indicating the necessity of including the nonlinearity of oil film dynamic forces, especially when response to large unbalance is to be predicted.

Nonlinear dynamic behaviors of ball bearing rotor system

Nonlinear forces and moments caused by ball bearing were calculated based on relationship of displacement and deflection and quasi-dynamic model of bearing.Five-DOF dynamic equations of rotor supported by ball bearings were estimated.The Newmark-β method and Newton-Laphson method were used to solve the equations.The dynamic characteristics of rotor system were studied through the time response,the phase portrait,the Poincar?maps and the bifurcation diagrams.The results show that the system goes through the quasi-periodic bifurcation route to chaos as rotate speed increases and there are several quasi-periodic regions and chaos regions.The amplitude decreases and the dynamic behaviors change as the axial load of ball bearing increases;the initial contact angle of ball bearing affects dynamic behaviors of the system obviously.The system can avoid non-periodic vibration by choosing structural parameters and operating parameters reasonably.

Nonlinear Vibration Induced by the Water-film Whirl and Whip in a Sliding Bearing Rotor System

Many industrial applications and experiments have shown that sliding bearings often experience fluid film whip due to nonlinear fluid film forces which can cause rotor-stator rub-impact failures. The oil-film whips have attracted many studies while the water-film whips in the water lubricated sliding bearing have been little researched with the mechanism still an open problem. The dynamic fluid film forces in a water sliding bearing are investigated numerically with rotational, whirling and squeezing motions of the journal using a nonlinear model to identify the relationships between the three motions. Rotor speed-up and slow-down experiments are then conducted with the rotor system supported by a water lubricated sliding bearing to induce the water-film whirl/whip and verify the relationship. The experimental results show that the vibrations of the journal alternated between increasing and decreasing rather than continuously increasing as the rotational speed increased to twice the first critical speed, which can be explained well by the nonlinear model. The radial growth rate of the whirl motion greatly affects the whirl frequency of the journal and is responsible for the frequency lock in the water-film whip. Further analysis shows that increasing the lubricating water flow rate changes the water-film whirl/whip characteristics, reduces the first critical speed, advances the time when significant water-film whirling motion occurs, and also increases the vibration amplitude at the bearing center which may lead to the rotor-stator rub-impact. The study gives the insight into the water-film whirl and whip in the water lubricated sliding bearing.

Parametric sensitivity analysis of bearing characteristics of single DOF autonomous system of magnetic-liquid double suspension bearing

The mathematical model of single degree of freedom(DOF)nonlinear autonomous bearing system under constant flow supporting model is deduced.The single DOF nonlinear autonomous bearing system is transformed with the method of linear and nonlinear treatment,the mathematical expression and parameters sensitivity of relative error of stiffness and damping are presented.Finally,the main factors of magnetic-liquid double suspension bearing(MLDSB)are analyzed,and the influence on bearing performance indicators of single DOF nonlinear autonomous bearing system of main factors is revealed.The results show that linear stiffness/damping is the first part of equivalent stiffness/damping,and the second and third parts are high order minor term of Tayor series transform.The film thickness,the magnetic-liquid proportionality coefficient,the mass of rotor are the major influence factor of the bearing performance.The research can provide the theoretical reference for the design and nonlinear analysis of MLDSB.

Progressive collapse resisting capacity of reinforced concrete load bearing wall structures

Reinforced concrete(RC) load bearing wall is widely used in high-rise and mid-rise buildings. Due to the number of walls in plan and reduction in lateral force portion, this system is not only stronger against earthquakes, but also more economical. The effect of progressive collapse caused by removal of load bearing elements, in various positions in plan and stories of the RC load bearing wall system was evaluated by nonlinear dynamic and static analyses. For this purpose, three-dimensional model of 10-story structure was selected. The analysis results indicated stability, strength and stiffness of the RC load-bearing wall system against progressive collapse. It was observed that the most critical condition for removal of load bearing walls was the instantaneous removal of the surrounding walls located at the corners of the building where the sections of the load bearing elements were changed. In this case, the maximum vertical displacement was limited to 6.3 mm and the structure failed after applying the load of 10 times the axial load bored by removed elements. Comparison between the results of the nonlinear dynamic and static analyses demonstrated that the "load factor" parameter was a reasonable criterion to evaluate the progressive collapse potential of the structure.

Modelling and Vibration of Gear Drive Systems Influenced by Real Face Width

Gear drives are one of the most common parts in many rotating machinery. If the gear drive runs under lower torque load, nonlinear effects like gear mesh interruption can occur and vibration is accompanied by impact motions of the gears, This paper presents an original method of the mathematical modelling of gear drive nonlinear vibrations by using the modal synthesis method with degrees of freedom number reduction. The model respects nonlinearities caused by gear mesh interruption, parametric gearing excitation caused by time-varying meshing stiffness and nonlinear contact forces acting between journals of the rolling-element bearings and the outer housing. The nonlinear model is then used for investigation of gear drive vibration, especially for constant gear mesh determination. The theoretical method is applied for investigating of test gear drive nonlinear vibration.

Effects of AMB Parameters on the Dynamic Stability of the Rotor

The motion equation of the rotor suspended by active magnetic bearing (AMB)is given in this paper after considering the nonlinear characteristics of the force.Fromthe response equation resulted from this Eq.we gained the functions of the jump ra-nge,and examined the effects of the A MB's parameters.

Nonlinear identification of electro-magnetic force model

Conventional attractive magnetic force models (proportional to the coil current squared and inversely proportional to the gap squared) cannot simulate the nonlinear responses of magnetic bearings in the presence of electromagnetic losses,flux leakage or saturation of iron.In this paper,based on results from an experimental set-up designed to study magnetic force,a novel parametric model is presented in the form of a nonlinear polynomial with unknown coefficients.The parameters of the proposed model are identified using the weighted residual method.Validations of the model identified were performed by comparing the results in time and frequency domains.The results show a good correlation between experiments and numerical simulations.