This paper present an experimental study on the RC slab-column connections with nonrectangular columns, namely cross-shaped column, T-shaped column and L-shaped column. The punching shear deformation and strength char...This paper present an experimental study on the RC slab-column connections with nonrectangular columns, namely cross-shaped column, T-shaped column and L-shaped column. The punching shear deformation and strength characteristics of slab-column connections with nonrectangular columns under punching shear load are investigated. Nine specimens with the three kinds of nonrectangular columns and two reference specimens with square columns are tested. The tested ultimate loads, deformations, and failure modes of specimens are presented and discussed. Test results reveal that the punching shear strength and ductility of the connections with nonrectangular columns are higher than those of the corresponding connections with square columns, and also prove that the application of nonrectangular columns to flat-plate structure was feasible. Based on the test results, one method of calculating punching shear strength of connections with nonrectangular columns is proposed, which conforms with the current design practice of China. The test results on the punching shear strength are compared with the predictions of the formulas proposed by codes of several different countrie; and the predictions given by ACI code and China code are found to be conservative as the reinforcement ratio is increased.展开更多
For coupled system of multilayer dynamics of fluids in porous media, the characteristic alternating-direction finite element methods for nourectangular regions applicable to parallel arithmetic are put forward and two...For coupled system of multilayer dynamics of fluids in porous media, the characteristic alternating-direction finite element methods for nourectangular regions applicable to parallel arithmetic are put forward and two-dimensional and three-dimensional schemes are used to form a complete set. Some techniques, such as calculus of variations, isoparametric transformation, patch approximation, operator-splitting, characteristic method, negative norm estimate, energy method, the theory of prior estimates and techniques are used. For the nourectangular regions case, optimal order estimates in L^2 norm are derived for the error in the approximation solution. Thus the well-known theoretical problem has been thoroughly and completely solved. These methods have been successfully used in multilayer oil resources migration-accumulation numerical simulation.展开更多
For the transient behavior of a semiconductor device, the modified method of characteristics with alternating-direction finite element procedures for nonrectangular region is put forward. Some techniques, such as calc...For the transient behavior of a semiconductor device, the modified method of characteristics with alternating-direction finite element procedures for nonrectangular region is put forward. Some techniques, such as calculus of variations, isoparametric transformation，patch approximation, operator-splitting, characteristic method, symmetrical reflection,energy method, negative norm estimate and a prior estimates and techniques, are employed. In the nonrectangular region case, optimal order estimates in L^2 norm are derived for the error in the approximation solution. Thus the well-known theoretical problem has been thoroughly and completely solved.展开更多
A novel kind of SC（superconducting） solenoid coil is designed to satisfy the homogencity requirement of the magnetic field.In this paper,we first calculate the current density distribution of the solenoid coil secti...A novel kind of SC（superconducting） solenoid coil is designed to satisfy the homogencity requirement of the magnetic field.In this paper,we first calculate the current density distribution of the solenoid coil section through the linear programming method.Then a traditional solenoid and a nonrectangular section solenoid are designed to produce a central field up to 7 T with a homogencity to the greatest extent.After comparision of the two solenoid coils designed in magnet field quality,fabrication cost and other aspects,the new design of the nonrectangular section of a solenoid coil can be realized through improving the techniques of framework fabrication and winding.Finally,the outlook and error analysis of this kind of SC magnet coil are also discussed briefly.展开更多
文摘This paper present an experimental study on the RC slab-column connections with nonrectangular columns, namely cross-shaped column, T-shaped column and L-shaped column. The punching shear deformation and strength characteristics of slab-column connections with nonrectangular columns under punching shear load are investigated. Nine specimens with the three kinds of nonrectangular columns and two reference specimens with square columns are tested. The tested ultimate loads, deformations, and failure modes of specimens are presented and discussed. Test results reveal that the punching shear strength and ductility of the connections with nonrectangular columns are higher than those of the corresponding connections with square columns, and also prove that the application of nonrectangular columns to flat-plate structure was feasible. Based on the test results, one method of calculating punching shear strength of connections with nonrectangular columns is proposed, which conforms with the current design practice of China. The test results on the punching shear strength are compared with the predictions of the formulas proposed by codes of several different countrie; and the predictions given by ACI code and China code are found to be conservative as the reinforcement ratio is increased.
基金This research is supported by the Major State Basic Research of China, the National Foundation of China and the National Key-Problems-Tackling Program of China.
文摘For coupled system of multilayer dynamics of fluids in porous media, the characteristic alternating-direction finite element methods for nourectangular regions applicable to parallel arithmetic are put forward and two-dimensional and three-dimensional schemes are used to form a complete set. Some techniques, such as calculus of variations, isoparametric transformation, patch approximation, operator-splitting, characteristic method, negative norm estimate, energy method, the theory of prior estimates and techniques are used. For the nourectangular regions case, optimal order estimates in L^2 norm are derived for the error in the approximation solution. Thus the well-known theoretical problem has been thoroughly and completely solved. These methods have been successfully used in multilayer oil resources migration-accumulation numerical simulation.
基金This research is supported by the Major State Basic Research Program of China (Grant No. 19990328), the National Tackling Key Problem Program, the National Science Foundation of China (Grant Nos. 10271066 and 10372052), the Doctorate Foundation of th
文摘For the transient behavior of a semiconductor device, the modified method of characteristics with alternating-direction finite element procedures for nonrectangular region is put forward. Some techniques, such as calculus of variations, isoparametric transformation，patch approximation, operator-splitting, characteristic method, symmetrical reflection,energy method, negative norm estimate and a prior estimates and techniques, are employed. In the nonrectangular region case, optimal order estimates in L^2 norm are derived for the error in the approximation solution. Thus the well-known theoretical problem has been thoroughly and completely solved.
基金Supported hy National Natural Science Foundation of China(91026001)High-tech Projects
文摘A novel kind of SC（superconducting） solenoid coil is designed to satisfy the homogencity requirement of the magnetic field.In this paper,we first calculate the current density distribution of the solenoid coil section through the linear programming method.Then a traditional solenoid and a nonrectangular section solenoid are designed to produce a central field up to 7 T with a homogencity to the greatest extent.After comparision of the two solenoid coils designed in magnet field quality,fabrication cost and other aspects,the new design of the nonrectangular section of a solenoid coil can be realized through improving the techniques of framework fabrication and winding.Finally,the outlook and error analysis of this kind of SC magnet coil are also discussed briefly.
