This paper uses deep seismic sounding (DSS) data to contrast and analyze the crustal structures of three plateau basins (Songpan-Garze, Qaidam, Longzhong) in the northeastern margin of the Qinghai-Xizang (Tibetan...This paper uses deep seismic sounding (DSS) data to contrast and analyze the crustal structures of three plateau basins (Songpan-Garze, Qaidam, Longzhong) in the northeastern margin of the Qinghai-Xizang (Tibetan) plateau, as well as two stable cratonic basins (Ordos, Sichuan) in its peripheral areas. Plateau basin crustal structures, lithological variations and crustal thickening mechanisms were investigated. The results show that, compared to the peripheral stable cratonic basins, the crystalline crusts of plateau basins in the northeastern margin are up to 10 15 km thicker, and the relative medium velocity difference is about 5% less. The medium velocity change in crustal layers of plateau basin indicates that the upper crust undergoes brittle deformation, whereas the lower crust deforms plastically with low velocity. The middle crust shows a brittle-to-plastic transition zone in this region. Thickening in the lower crust (about 5 10 km), and rheological characteristics that show low- medium velocity (relatively reduced by 7%), suggest that crustal thickening mainly takes place in lower crust in the northeastern margin of the Tibetan plateau. The crust along the northeastern margin shows evidence of wholesale block movement, and crustal shortening and thickening seem to be the main deformation features of this region. The GPS data show that the block motion modes and crustal thickening in the Tibetan plateau is closely related to the peripheral tectonic stress field and motion direction of the Indian plate. The Mani-Yushu- Xianshuihe fold belt along the boundary between the Qiangtang block and the Bayan Har block divides the different plateau thickening tectonic environments into the middle-western plateau, the northeastern margin and the southeastern plateau.展开更多
The equation for determining cross-fault representative value is calculated based on hanging wall and foot wall reference level surfaces. The cross-fault data reliability are analyzed base on the stability of referenc...The equation for determining cross-fault representative value is calculated based on hanging wall and foot wall reference level surfaces. The cross-fault data reliability are analyzed base on the stability of reference datum and observation points, thereby facili- tating plotting of the representative value curves after removing interference. The spatial and temporal characteristics of fault deformation abnormalities before the 2016 Menyuan Ms6.4 earthquake, as well as the fault-movement characteristics reflected by representa- tive value, are summarized. The results show that many site trends had changed 1-3 years before the Menyuan Ms6.4 earthquake in the Qilian Fault, reflecting certain background abnormalities. The short-term abnormalities centrally had appeared in the 6 months to 1 year period before the earthquake near and in the neighborhood of the source region, demonstrating a significantly increased number of short-term abnormalities. Many sites near and in the neighborhood of the source region had strengthened inverse activities or had changed from positive to inverse activities in the most recent 2-3 years, which reflect stress-field enhancements or adjustment features.展开更多
The geological structure background, the crustal structure and the shape of Moho in the northeastern margin of the Qinghai-Tibetan plateau are studied. Based on artificial seismic sounding profile as well as geologica...The geological structure background, the crustal structure and the shape of Moho in the northeastern margin of the Qinghai-Tibetan plateau are studied. Based on artificial seismic sounding profile as well as geological data. The main results are summarized as follows: (1) The geotectonic subdivisions and the characteristics of main deep and large faults in the northeastern margin of the Qinghai-Tibetan plateau are presented; (2) The general features of the Moho are obtained mainly based on artificial seismic sounding data; (3) There exists well corresponding relation between surface faults and some features of the Moho, which suggests that such complex crustal structure might be the preparation environment of strong earthquakes.展开更多
The amalgamation and breakup mechanisms of the Rodinia supercontinent during the Meso- and Neoproterozoic have been the focus of much research. However, few studies have examined the response of Neoproterozoic tectoni...The amalgamation and breakup mechanisms of the Rodinia supercontinent during the Meso- and Neoproterozoic have been the focus of much research. However, few studies have examined the response of Neoproterozoic tectonics and magmatism along the northeastern margin of the Yangtze Plate to synchronous global events. The Qianliyan Uplift is located on the eastern margin of the Sulu orogenic belt in the ocean, but the tectonic affinity of the uplift and its relationship to the Sulu orogenic belt remains unclear. In this study, we investigated the formation age, geochemical characteristics, genesis type, and affinity of the granitic gneiss on Chaolian Island of the Qianliyan uplift and its tectonic significance.展开更多
Fold-thrust belts are common structural styles under the background of long-term regional tectonic shortening.The northern and northeastern margins of the Qinghai-Tibetan Plateau are located on the edge of the growth ...Fold-thrust belts are common structural styles under the background of long-term regional tectonic shortening.The northern and northeastern margins of the Qinghai-Tibetan Plateau are located on the edge of the growth and expansion of the Qinghai-Tibetan Plateau.Since nearly 10 Ma,some significant and typical fold thrust belt have been formed.The spatial-temporal evolution of these fold-thrust belts and the characteristics of surface deformations are significant issues in geodynamics.In this paper,we use the elastoplastic finite element model with considering the contact nonlinearity to study the spatialtemporal evolution of the fold-thrust belts in the northern and northeastern margins of the Qinghai-Tibetan Plateau,with particular attention to the details of the relationship between the depth and the shallow,the spatialtemporal order,and the characteristics of the surface deformation,etc.,in order to make a relatively complete mechanical interpretation of the spatial-temporal evolution of the foldthrust belts in the northern and northeastern margins of the Qinghai-Tibetan Plateau from the perspective of geodynamics.展开更多
Based on leveling data in 1972 -2011 and relative-gravity data in 1993 -2011, we obtained a longterm vertical crustal-deformation rate of 1.62mm/a and a relative-gravity variation rate of 0.62 × 10^-8 ms^-2a^-1 f...Based on leveling data in 1972 -2011 and relative-gravity data in 1993 -2011, we obtained a longterm vertical crustal-deformation rate of 1.62mm/a and a relative-gravity variation rate of 0.62 × 10^-8 ms^-2a^-1 for the northeastern margin area of Qinghai-Tibet plateau. After removing the contributions from the observed vertical movement and inferred surface denudation, we obtain a gravity-variation rate of 0.73 × 10^-8 ms^-2a^-1 attributable to the mass changes beneath the crust. This positive change suggests that the total mass under the observation stations was gradually increasing. We consider this result to be the gravitational evidence of underplating beneath the study area, and propose that the underplating was caused by collision betwen the Indian plate and Tibetan plateau and by gravitation-potential induced deviatoric stress.展开更多
The Middle Triassic Ladinian-Upper Triassic Norian series in the Mesozoic-Cenozoic Ruo’ergai basin of Songpan area is characterized of large thick shallow marine-deep marine fine grained clastic.The strata are region...The Middle Triassic Ladinian-Upper Triassic Norian series in the Mesozoic-Cenozoic Ruo’ergai basin of Songpan area is characterized of large thick shallow marine-deep marine fine grained clastic.The strata are regionally unconformable between each adjacent two of the Middle-Late Triassic fine grained clastic,the Jurassic coal-containing clastic,the Cretaceous-Paleogene variegated coarse clastic。展开更多
On the basis of Discontinuous Deformation Analysis (DDA), and considering the moderate intrusion of specific block boundaries to different extents, the first-order block motion model is established for the northeaster...On the basis of Discontinuous Deformation Analysis (DDA), and considering the moderate intrusion of specific block boundaries to different extents, the first-order block motion model is established for the northeastern margin of Qinghai-Xizang(Tibet) block and the kinematical model for depicting deformation of small regions as well by using GPS observations of three periods (1991, 1999 and 2001). By simulating, we obtained the motion features of the first-order blocks between the large WWN faults on the sides of the studied region, the distribution features of the principal strain rate field and the inhomogeneous motion features with space-time of the faults in the northern boundary of the Qinghai-Xizang (Tibet) block.展开更多
In this paper, the spatial-temporal gravity variation patterns of the northeastern margin of Qinghai-Xizang (Tibet) Plateau in 1992~2001 are modeled using bicubic spline interpolation functions and the relations of g...In this paper, the spatial-temporal gravity variation patterns of the northeastern margin of Qinghai-Xizang (Tibet) Plateau in 1992~2001 are modeled using bicubic spline interpolation functions and the relations of gravity change with seismicity and tectonic movement are discussed preliminarily. The results show as follows: ① Regional gravitational field changes regularly and the gravity abnormity zone or gravity concentration zone appears in the earthquake preparation process; ② In the significant time period, the gravity variation shows different features in the northwest, southeast and northeast parts of the surveyed region respectively, with Lanzhou as its boundary; ③ The gravity variation distribution is basically identical to the strike of tectonic fault zone of the region, and the contour of gravity variation is closely related to the fault distribution.展开更多
A series of large strike-slip and thrust faults have developed in the northeastern margin of the Tibetan Plateau since the Late Cenozoic,with strong and active tectonic activity and frequent occurrences of large earth...A series of large strike-slip and thrust faults have developed in the northeastern margin of the Tibetan Plateau since the Late Cenozoic,with strong and active tectonic activity and frequent occurrences of large earthquakes.Modulation of regional tectonic stress distribution,strain fields,and seismic hazards has not been well studied.This study introduces a three-dimensional viscoelastic finite element numerical model to calculate crustal stress and strain rate fields under current tectonic loading.The preliminary results show that the direction of the horizontal principal compressive stress rate and compressive horizontal principal strain rate in the northeastern margin of the Tibetan Plateau rotate clockwise as a whole,and this rotation is more significant in the southeast direction because of the block of the Alxa and the Ordos blocks.The NE-SW horizontal principal compressive stress rate and SE horizontal tensile stress rate dominate the entire study region.The maximum value of the horizontal principal compressive strain rate at a depth of 0 km in the model is approximately 4×10^(-8)yr^(-1)near the East Kunlun fault and is smaller in the stable Alxa and Ordos blocks at approximately 1×10^(-8)yr^(-1).The calculated regional stress state is in good agreement with the actual focal mechanism solution,indicating that strike-slip and thrust stress fields dominate the northeastern margin of the Tibetan Plateau.The Altyn Tagh,East Kunlun,and Haiyuan faults demonstrate that the maximum shear strain rate gradually decreases eastward,and the decrease in the maximum shear strain rate value is absorbed by orogenic uplift and crustal shortening at its boundaries.The western section of the Altyn Tagh fault,west-to-middle sections of the East Kunlun fault,and west-to-middle sections of the Haiyuan fault will have high seismic hazards in the future.展开更多
Using seismic data of about one year recorded by 18 broadband stations of ASCENT project,we obtained 2547 receiver functions in the northeastern Tibetan Plateau.The Moho depths under 14 stations were calculated by app...Using seismic data of about one year recorded by 18 broadband stations of ASCENT project,we obtained 2547 receiver functions in the northeastern Tibetan Plateau.The Moho depths under 14 stations were calculated by applying the H-κ domain search algorithm.The Moho depths under the stations with lower signal-noise ratio(SNR) were estimated by the time delay of the PS conversion.Results show that the Moho depth varies in a range of ~40–60 km.The Moho near the Haiyuan fault is vague,and its depth is larger than those on its two sides.In the Qinling-Qilian Block,the Moho becomes shallower gradually from west to east.To the east of 105°E,the average depth of the Moho is 45 km,whereas the west is 50 km or even deeper.Combining our results with surface wave research,we suggest a boundary between the Qinling and the Qilian Mountains at around 105°E.S wave velocities beneath 15 stations have been obtained through a linear inversion by using Crust2.0 as an initial model,and the crustal thickness that was derived by H-κ domain search algorithm was also taken into account.The results are very similar to the results of previous active source studies.The resulting figure indicates that low velocity layers developed in the middle and lower crust beneath the transition zone of the Tibet Block and western Qinling,which may be related to regional faults and deep earth dynamics.The velocity of the middle and lower crust increases from the Songpan Block to the northeastern margin of Tibetan Plateau.Based on the velocity of the crust,the distribution of the low velocity zone and the composition of the curst(Poisson's ratio),we infer that the crust thickening results from the crust shortening along the direction of compression.展开更多
U-Pb ages of Devonian detrital zircons from Tabei Uplift have been determined through LA-ICP-MS test technology.The results revealed that most zircon ages concentrate on 460-414 Ma,especially around 436-423 Ma,indicat...U-Pb ages of Devonian detrital zircons from Tabei Uplift have been determined through LA-ICP-MS test technology.The results revealed that most zircon ages concentrate on 460-414 Ma,especially around 436-423 Ma,indicating possible occurrences of strong tectonic events at the northern margin of Tarim Basin during that period.Combined with previous researches on the basin marginal orogenic belts,intense tectonic activities developed at the northeast margin of Tarim Basin and its obvious sedimentary responses in basin during the end of Ordovician to Early-Middle Silurian are discussed.These include(1) several unconformities within the Late Ordovician-Silurian,showing truncation,erosion,and onlap characteristics,which reflected the local uplift formed during the surrounding extrusion process;(2) the Silurian fluvial delta system from northeast to southwest in Keping,Yingmaili,Hade,and Caohu areas,which reflected the partial uplift at the northeast margin and provided clastic supply to basin;and(3) as indicated by heavy mineral analysis,the Silurian sediments came mainly from the recycles of orogenic belts provenance,which indicated the compress tectonic setting.In addition,a wide range of red mudstone layer distribution in the upper part of the Silurian may be closely related to the surrounding tectonic uplift and the rapid decline of sea levels.展开更多
Based on the recent observations about the movement and rheological structure of the lithosphere and deformation pattern of the crust, we developed a three-dimensional finite element model for the northeastern margin ...Based on the recent observations about the movement and rheological structure of the lithosphere and deformation pattern of the crust, we developed a three-dimensional finite element model for the northeastern margin of the Tibetan Plateau.The model considered the impacts of both external and internal conditions, including mantle convection, gravitational potential energy and block interactions. We compared the simulated surface movement rates to the observed GPS velocities, and the results revealed that crustal movement gradually decreased toward the edge of the plateau. The factors controlling this pattern are the interactions of adjacent blocks, gravitational potential energy of the plateau, and also mantle convection as well. Additionally,according to the observation that there was an apparent difference between the horizontal movement rate of the lithosphere and convective velocity of the underlying mantle, and also based on the results of seismic anisotropy studies that suggest different strengths and deformation regimes of the lithosphere in different tectonic blocks, we proposed that the impact of mantle convection on the lithosphere may have varied in space, and introduced a parameter named mantle convection intensity factor in numerical simulations. Our simulation results show consistent surface movement rates with GPS observations, which further supports the viewpoint of seismic anisotropy studies, i.e., the degree of coupling between the crust and mantle varies significantly among different blocks.展开更多
The transitional area between the northeastern margin of the Qinghai-Tibetan Plateau, Ordos Block and Alxa Block,also being the northern segment of the North-South Seismic Belt, is characterized by considerably high s...The transitional area between the northeastern margin of the Qinghai-Tibetan Plateau, Ordos Block and Alxa Block,also being the northern segment of the North-South Seismic Belt, is characterized by considerably high seismicity level and high risk of strong earthquakes. In view of the special tectonic environment and deep tectonic setting in this area, this study used two seismic wide-angle reflection/refraction cross profiles for double constraining, so as to more reliably obtain the fine-scale velocity structure characteristics in both the shallow and deep crust of individual blocks and their boundaries in the study area,and further discuss the seismogenic environment in seismic zones with strong historical earthquakes. In this paper, the P-wave data from the two profiles are processed and interpreted, and two-dimensional crustal velocity structure models along the two profiles are constructed by travel time forward modeling. The results show that there are great differences in velocity structure,shape of intra-crustal interfaces and crustal thickness among different blocks sampled by the two seismic profiles. The crustal thickness along the Lanzhou-Huianbu-Yulin seismic sounding profile(L1) increases from ~43 km in the western margin of Ordos Block to ~56 km in the Qilian Block to the west. In the Ordos Block, the velocity contours vary gently, and the average velocity of the crust is about 6.30 km s-1; On the other hand, the velocity structures in the crust of the Qilian Block and the arclike tectonic zone vary dramatically, and the average crustal velocities in these areas are about 0.10 km s-1 lower than that of the Ordos Block. In addition, discontinuous low-velocity bodies(LVZ1 and LVZ2) are identified in the crust of the Qilian Block and the arc-like tectonic zone, the velocity of which is 0.10–0.20 km s-1 lower than that of the surroundings. The average crustal thickness of the Ordos Block is consistently estimated to be around 43 km along both Profile L2(Tongchuan-Huianbu-Alashan left banner seismic sounding profile) and Profile L1. In contrast to the gently varying intra-crustal interfaces and velocity contours in the Ordos Block along Profile L1, which is a typical structure characteristic of stable cratons, the crustal structure in the Ordos Block along Profile L2 exhibits rather complex variations. This indicates the presence of significant structural differences in the crust within the Ordos Block. The crustal structure of the Helan Mountain Qilian Block and the Yinchuan Basin is featured by "uplift and depression" undulations, showing the characteristics of localized compressional deformation.Moreover, there are low-velocity zones with alternative high and low velocities in the middle and lower crust beneath the Helan Mountain, where the velocity is about 0.15–0.25 km s-1 lower than that of the surrounding areas. The crustal thickness of the Alxa Block is about 49 km, and the velocity contours in the upper and middle-lower crust of the block vary significantly. The complex crustal velocity structure images along the two seismic sounding profiles L1 and L2 reveal considerable structural differences among different tectonic blocks, their coupling relationships and velocity structural features in the seismic zones where strong historical earthquakes occurred. The imaging result of this study provides fine-scale crustal structure information for further understanding the seismogenic environment and mechanism in the study area.展开更多
基金supported by the project Active Fault Survey in Chinese mainl and-DSS profile in the central Longmen-shan from CEA (2010)National Natural Science Foundation of China (No. 40974033)
文摘This paper uses deep seismic sounding (DSS) data to contrast and analyze the crustal structures of three plateau basins (Songpan-Garze, Qaidam, Longzhong) in the northeastern margin of the Qinghai-Xizang (Tibetan) plateau, as well as two stable cratonic basins (Ordos, Sichuan) in its peripheral areas. Plateau basin crustal structures, lithological variations and crustal thickening mechanisms were investigated. The results show that, compared to the peripheral stable cratonic basins, the crystalline crusts of plateau basins in the northeastern margin are up to 10 15 km thicker, and the relative medium velocity difference is about 5% less. The medium velocity change in crustal layers of plateau basin indicates that the upper crust undergoes brittle deformation, whereas the lower crust deforms plastically with low velocity. The middle crust shows a brittle-to-plastic transition zone in this region. Thickening in the lower crust (about 5 10 km), and rheological characteristics that show low- medium velocity (relatively reduced by 7%), suggest that crustal thickening mainly takes place in lower crust in the northeastern margin of the Tibetan plateau. The crust along the northeastern margin shows evidence of wholesale block movement, and crustal shortening and thickening seem to be the main deformation features of this region. The GPS data show that the block motion modes and crustal thickening in the Tibetan plateau is closely related to the peripheral tectonic stress field and motion direction of the Indian plate. The Mani-Yushu- Xianshuihe fold belt along the boundary between the Qiangtang block and the Bayan Har block divides the different plateau thickening tectonic environments into the middle-western plateau, the northeastern margin and the southeastern plateau.
基金supported by the Seismic Regime Tracking Project in the Year of 2016,China Earthquake Administration(2016010205 and 2016020204)
文摘The equation for determining cross-fault representative value is calculated based on hanging wall and foot wall reference level surfaces. The cross-fault data reliability are analyzed base on the stability of reference datum and observation points, thereby facili- tating plotting of the representative value curves after removing interference. The spatial and temporal characteristics of fault deformation abnormalities before the 2016 Menyuan Ms6.4 earthquake, as well as the fault-movement characteristics reflected by representa- tive value, are summarized. The results show that many site trends had changed 1-3 years before the Menyuan Ms6.4 earthquake in the Qilian Fault, reflecting certain background abnormalities. The short-term abnormalities centrally had appeared in the 6 months to 1 year period before the earthquake near and in the neighborhood of the source region, demonstrating a significantly increased number of short-term abnormalities. Many sites near and in the neighborhood of the source region had strengthened inverse activities or had changed from positive to inverse activities in the most recent 2-3 years, which reflect stress-field enhancements or adjustment features.
基金National Key Research Development Project(95-13-02-02).Contribution No.LC2000052,Lanzhou Institute of Seismology,China SeismologicalBureau.
文摘The geological structure background, the crustal structure and the shape of Moho in the northeastern margin of the Qinghai-Tibetan plateau are studied. Based on artificial seismic sounding profile as well as geological data. The main results are summarized as follows: (1) The geotectonic subdivisions and the characteristics of main deep and large faults in the northeastern margin of the Qinghai-Tibetan plateau are presented; (2) The general features of the Moho are obtained mainly based on artificial seismic sounding data; (3) There exists well corresponding relation between surface faults and some features of the Moho, which suggests that such complex crustal structure might be the preparation environment of strong earthquakes.
基金funded by the National Natural Science Foundation of China(grants No.41406080,41273066 and 41106060)China Geological Survey(grant No.DD20160155)
文摘The amalgamation and breakup mechanisms of the Rodinia supercontinent during the Meso- and Neoproterozoic have been the focus of much research. However, few studies have examined the response of Neoproterozoic tectonics and magmatism along the northeastern margin of the Yangtze Plate to synchronous global events. The Qianliyan Uplift is located on the eastern margin of the Sulu orogenic belt in the ocean, but the tectonic affinity of the uplift and its relationship to the Sulu orogenic belt remains unclear. In this study, we investigated the formation age, geochemical characteristics, genesis type, and affinity of the granitic gneiss on Chaolian Island of the Qianliyan uplift and its tectonic significance.
基金financially supported by the National Science Foundation of China (42074117)supported by the Fundamental Research Funds for the Central Universities。
文摘Fold-thrust belts are common structural styles under the background of long-term regional tectonic shortening.The northern and northeastern margins of the Qinghai-Tibetan Plateau are located on the edge of the growth and expansion of the Qinghai-Tibetan Plateau.Since nearly 10 Ma,some significant and typical fold thrust belt have been formed.The spatial-temporal evolution of these fold-thrust belts and the characteristics of surface deformations are significant issues in geodynamics.In this paper,we use the elastoplastic finite element model with considering the contact nonlinearity to study the spatialtemporal evolution of the fold-thrust belts in the northern and northeastern margins of the Qinghai-Tibetan Plateau,with particular attention to the details of the relationship between the depth and the shallow,the spatialtemporal order,and the characteristics of the surface deformation,etc.,in order to make a relatively complete mechanical interpretation of the spatial-temporal evolution of the foldthrust belts in the northern and northeastern margins of the Qinghai-Tibetan Plateau from the perspective of geodynamics.
基金supported by the National Natural Science Foundation of China(40874035)
文摘Based on leveling data in 1972 -2011 and relative-gravity data in 1993 -2011, we obtained a longterm vertical crustal-deformation rate of 1.62mm/a and a relative-gravity variation rate of 0.62 × 10^-8 ms^-2a^-1 for the northeastern margin area of Qinghai-Tibet plateau. After removing the contributions from the observed vertical movement and inferred surface denudation, we obtain a gravity-variation rate of 0.73 × 10^-8 ms^-2a^-1 attributable to the mass changes beneath the crust. This positive change suggests that the total mass under the observation stations was gradually increasing. We consider this result to be the gravitational evidence of underplating beneath the study area, and propose that the underplating was caused by collision betwen the Indian plate and Tibetan plateau and by gravitation-potential induced deviatoric stress.
文摘The Middle Triassic Ladinian-Upper Triassic Norian series in the Mesozoic-Cenozoic Ruo’ergai basin of Songpan area is characterized of large thick shallow marine-deep marine fine grained clastic.The strata are regionally unconformable between each adjacent two of the Middle-Late Triassic fine grained clastic,the Jurassic coal-containing clastic,the Cretaceous-Paleogene variegated coarse clastic。
文摘On the basis of Discontinuous Deformation Analysis (DDA), and considering the moderate intrusion of specific block boundaries to different extents, the first-order block motion model is established for the northeastern margin of Qinghai-Xizang(Tibet) block and the kinematical model for depicting deformation of small regions as well by using GPS observations of three periods (1991, 1999 and 2001). By simulating, we obtained the motion features of the first-order blocks between the large WWN faults on the sides of the studied region, the distribution features of the principal strain rate field and the inhomogeneous motion features with space-time of the faults in the northern boundary of the Qinghai-Xizang (Tibet) block.
文摘In this paper, the spatial-temporal gravity variation patterns of the northeastern margin of Qinghai-Xizang (Tibet) Plateau in 1992~2001 are modeled using bicubic spline interpolation functions and the relations of gravity change with seismicity and tectonic movement are discussed preliminarily. The results show as follows: ① Regional gravitational field changes regularly and the gravity abnormity zone or gravity concentration zone appears in the earthquake preparation process; ② In the significant time period, the gravity variation shows different features in the northwest, southeast and northeast parts of the surveyed region respectively, with Lanzhou as its boundary; ③ The gravity variation distribution is basically identical to the strike of tectonic fault zone of the region, and the contour of gravity variation is closely related to the fault distribution.
基金supported by the National Natural Science Foundation of China for Distinguished Young Scholars(Grant Nos.U2239205,41725017)the National Key Scientific and Technological Infrastructure Project。
文摘A series of large strike-slip and thrust faults have developed in the northeastern margin of the Tibetan Plateau since the Late Cenozoic,with strong and active tectonic activity and frequent occurrences of large earthquakes.Modulation of regional tectonic stress distribution,strain fields,and seismic hazards has not been well studied.This study introduces a three-dimensional viscoelastic finite element numerical model to calculate crustal stress and strain rate fields under current tectonic loading.The preliminary results show that the direction of the horizontal principal compressive stress rate and compressive horizontal principal strain rate in the northeastern margin of the Tibetan Plateau rotate clockwise as a whole,and this rotation is more significant in the southeast direction because of the block of the Alxa and the Ordos blocks.The NE-SW horizontal principal compressive stress rate and SE horizontal tensile stress rate dominate the entire study region.The maximum value of the horizontal principal compressive strain rate at a depth of 0 km in the model is approximately 4×10^(-8)yr^(-1)near the East Kunlun fault and is smaller in the stable Alxa and Ordos blocks at approximately 1×10^(-8)yr^(-1).The calculated regional stress state is in good agreement with the actual focal mechanism solution,indicating that strike-slip and thrust stress fields dominate the northeastern margin of the Tibetan Plateau.The Altyn Tagh,East Kunlun,and Haiyuan faults demonstrate that the maximum shear strain rate gradually decreases eastward,and the decrease in the maximum shear strain rate value is absorbed by orogenic uplift and crustal shortening at its boundaries.The western section of the Altyn Tagh fault,west-to-middle sections of the East Kunlun fault,and west-to-middle sections of the Haiyuan fault will have high seismic hazards in the future.
基金financially supported by National Natural Science Foundation of China(Grant No.40930317)CHINARE2012-02-02+1 种基金Project SinoProbe-02-03the NSFC Innovation Research Group Fund(Grant No.41021001)
文摘Using seismic data of about one year recorded by 18 broadband stations of ASCENT project,we obtained 2547 receiver functions in the northeastern Tibetan Plateau.The Moho depths under 14 stations were calculated by applying the H-κ domain search algorithm.The Moho depths under the stations with lower signal-noise ratio(SNR) were estimated by the time delay of the PS conversion.Results show that the Moho depth varies in a range of ~40–60 km.The Moho near the Haiyuan fault is vague,and its depth is larger than those on its two sides.In the Qinling-Qilian Block,the Moho becomes shallower gradually from west to east.To the east of 105°E,the average depth of the Moho is 45 km,whereas the west is 50 km or even deeper.Combining our results with surface wave research,we suggest a boundary between the Qinling and the Qilian Mountains at around 105°E.S wave velocities beneath 15 stations have been obtained through a linear inversion by using Crust2.0 as an initial model,and the crustal thickness that was derived by H-κ domain search algorithm was also taken into account.The results are very similar to the results of previous active source studies.The resulting figure indicates that low velocity layers developed in the middle and lower crust beneath the transition zone of the Tibet Block and western Qinling,which may be related to regional faults and deep earth dynamics.The velocity of the middle and lower crust increases from the Songpan Block to the northeastern margin of Tibetan Plateau.Based on the velocity of the crust,the distribution of the low velocity zone and the composition of the curst(Poisson's ratio),we infer that the crust thickening results from the crust shortening along the direction of compression.
基金supported by the Fundamental Research Funds in Institute of Geology, China Earthquake Administration (Grant No. IGCEA1220)Special Project on Earthquake Research (Grant No. 201308012)+1 种基金National Natural Science Foundation of China (Grant Nos. 41202158, 41372220 & 41590861)Science for Earthquake Resilience (Grant No. XH14052)
基金supported by National Natural Science Foundation of China (Grant No. 41130422)National Natural Science Foundation of China (Grant No.40372056)Fundamental Research Funds for the Central Universities (Grant No. 2010ZD07)
文摘U-Pb ages of Devonian detrital zircons from Tabei Uplift have been determined through LA-ICP-MS test technology.The results revealed that most zircon ages concentrate on 460-414 Ma,especially around 436-423 Ma,indicating possible occurrences of strong tectonic events at the northern margin of Tarim Basin during that period.Combined with previous researches on the basin marginal orogenic belts,intense tectonic activities developed at the northeast margin of Tarim Basin and its obvious sedimentary responses in basin during the end of Ordovician to Early-Middle Silurian are discussed.These include(1) several unconformities within the Late Ordovician-Silurian,showing truncation,erosion,and onlap characteristics,which reflected the local uplift formed during the surrounding extrusion process;(2) the Silurian fluvial delta system from northeast to southwest in Keping,Yingmaili,Hade,and Caohu areas,which reflected the partial uplift at the northeast margin and provided clastic supply to basin;and(3) as indicated by heavy mineral analysis,the Silurian sediments came mainly from the recycles of orogenic belts provenance,which indicated the compress tectonic setting.In addition,a wide range of red mudstone layer distribution in the upper part of the Silurian may be closely related to the surrounding tectonic uplift and the rapid decline of sea levels.
基金supported by the National Natural Science Foundation of China (Grant No. 41504079)the China National Special Fund for Earthquake Scientific Research in Public Interest (Grant No. 201308011)
文摘Based on the recent observations about the movement and rheological structure of the lithosphere and deformation pattern of the crust, we developed a three-dimensional finite element model for the northeastern margin of the Tibetan Plateau.The model considered the impacts of both external and internal conditions, including mantle convection, gravitational potential energy and block interactions. We compared the simulated surface movement rates to the observed GPS velocities, and the results revealed that crustal movement gradually decreased toward the edge of the plateau. The factors controlling this pattern are the interactions of adjacent blocks, gravitational potential energy of the plateau, and also mantle convection as well. Additionally,according to the observation that there was an apparent difference between the horizontal movement rate of the lithosphere and convective velocity of the underlying mantle, and also based on the results of seismic anisotropy studies that suggest different strengths and deformation regimes of the lithosphere in different tectonic blocks, we proposed that the impact of mantle convection on the lithosphere may have varied in space, and introduced a parameter named mantle convection intensity factor in numerical simulations. Our simulation results show consistent surface movement rates with GPS observations, which further supports the viewpoint of seismic anisotropy studies, i.e., the degree of coupling between the crust and mantle varies significantly among different blocks.
基金supported by the Special Projects of Scientific Research of the Earthquake Industry (Grant No. 201408023)the National Natural Science Foundation of China (Grant Nos. 41474076 & 41474077)
文摘The transitional area between the northeastern margin of the Qinghai-Tibetan Plateau, Ordos Block and Alxa Block,also being the northern segment of the North-South Seismic Belt, is characterized by considerably high seismicity level and high risk of strong earthquakes. In view of the special tectonic environment and deep tectonic setting in this area, this study used two seismic wide-angle reflection/refraction cross profiles for double constraining, so as to more reliably obtain the fine-scale velocity structure characteristics in both the shallow and deep crust of individual blocks and their boundaries in the study area,and further discuss the seismogenic environment in seismic zones with strong historical earthquakes. In this paper, the P-wave data from the two profiles are processed and interpreted, and two-dimensional crustal velocity structure models along the two profiles are constructed by travel time forward modeling. The results show that there are great differences in velocity structure,shape of intra-crustal interfaces and crustal thickness among different blocks sampled by the two seismic profiles. The crustal thickness along the Lanzhou-Huianbu-Yulin seismic sounding profile(L1) increases from ~43 km in the western margin of Ordos Block to ~56 km in the Qilian Block to the west. In the Ordos Block, the velocity contours vary gently, and the average velocity of the crust is about 6.30 km s-1; On the other hand, the velocity structures in the crust of the Qilian Block and the arclike tectonic zone vary dramatically, and the average crustal velocities in these areas are about 0.10 km s-1 lower than that of the Ordos Block. In addition, discontinuous low-velocity bodies(LVZ1 and LVZ2) are identified in the crust of the Qilian Block and the arc-like tectonic zone, the velocity of which is 0.10–0.20 km s-1 lower than that of the surroundings. The average crustal thickness of the Ordos Block is consistently estimated to be around 43 km along both Profile L2(Tongchuan-Huianbu-Alashan left banner seismic sounding profile) and Profile L1. In contrast to the gently varying intra-crustal interfaces and velocity contours in the Ordos Block along Profile L1, which is a typical structure characteristic of stable cratons, the crustal structure in the Ordos Block along Profile L2 exhibits rather complex variations. This indicates the presence of significant structural differences in the crust within the Ordos Block. The crustal structure of the Helan Mountain Qilian Block and the Yinchuan Basin is featured by "uplift and depression" undulations, showing the characteristics of localized compressional deformation.Moreover, there are low-velocity zones with alternative high and low velocities in the middle and lower crust beneath the Helan Mountain, where the velocity is about 0.15–0.25 km s-1 lower than that of the surrounding areas. The crustal thickness of the Alxa Block is about 49 km, and the velocity contours in the upper and middle-lower crust of the block vary significantly. The complex crustal velocity structure images along the two seismic sounding profiles L1 and L2 reveal considerable structural differences among different tectonic blocks, their coupling relationships and velocity structural features in the seismic zones where strong historical earthquakes occurred. The imaging result of this study provides fine-scale crustal structure information for further understanding the seismogenic environment and mechanism in the study area.