The kinematic characteristics of the Sanguankou-Niushoushan fault(SGK-NSSF) are of great significance to the understanding of the extension of the arc tectonic belt in the northeastern margin of the Tibet Plateau. U...The kinematic characteristics of the Sanguankou-Niushoushan fault(SGK-NSSF) are of great significance to the understanding of the extension of the arc tectonic belt in the northeastern margin of the Tibet Plateau. Using field surveys and various data collection methods, including large-scale geological mapping, measurement of typical topographies, and dating of sedimentary strata, it was determined that the SGK-NSSF exhibits obvious dextral strike-slip characteristics and thus is not a sinistral strike-slip fault, as believed by previous researchers. The results of this study show that the geological boundaries for the Paleozoic, Mesozoic, and Cenozoic eras were all dextrally dislocated by the fault, with the faulted displacements being similar. The maximum strike-slip displacement of the fault, after elimination of topographic effects, was found to be 961±6 m. The Sanguankou fault at the northern section exhibits obvious characteristics of more recent activities, with a series of small gullies having undergone synchronized dextral writhing after traversing the fault. The average horizontal slip rate of the fault since the late Quaternary was determined to be approximately 0.35 mm/a. The pre-existing fold structures formed during the late Pliocene were dislocated by the fault and became ex situ, indicating that dextral strike-slip of the fault could not have occurred prior to the late Pliocene. The maximum displacements and average slip rates were used to estimate the onset time of the dextral strike-slip activities of the fault as being after 2.7 Ma. In this study, the understanding of previous researchers concerning the extension in the northeastern margin of the Tibet Plateau was combined with analyses of the successive relationships between fold deformations and fault activities. This led to the finding that the extension in the northeastern margin of the Tibet Plateau reached the vicinity of the SGK-NSSF during the late Pliocene(~2.7 Ma), causing regional uplift and fold deformations of the strata there. During the early Quaternary, the northeastern compression of the Tibet Plateau and the counterclockwise rotation of the Ordos block collectively resulted in the dextral strike-slip activities of the SGK-NSSF. This then formed the foremost margin of the arc tectonic belt extension in the northeastern margin of the Tibet Plateau.展开更多
This paper uses deep seismic sounding (DSS) data to contrast and analyze the crustal structures of three plateau basins (Songpan-Garze, Qaidam, Longzhong) in the northeastern margin of the Qinghai-Xizang (Tibetan...This paper uses deep seismic sounding (DSS) data to contrast and analyze the crustal structures of three plateau basins (Songpan-Garze, Qaidam, Longzhong) in the northeastern margin of the Qinghai-Xizang (Tibetan) plateau, as well as two stable cratonic basins (Ordos, Sichuan) in its peripheral areas. Plateau basin crustal structures, lithological variations and crustal thickening mechanisms were investigated. The results show that, compared to the peripheral stable cratonic basins, the crystalline crusts of plateau basins in the northeastern margin are up to 10 15 km thicker, and the relative medium velocity difference is about 5% less. The medium velocity change in crustal layers of plateau basin indicates that the upper crust undergoes brittle deformation, whereas the lower crust deforms plastically with low velocity. The middle crust shows a brittle-to-plastic transition zone in this region. Thickening in the lower crust (about 5 10 km), and rheological characteristics that show low- medium velocity (relatively reduced by 7%), suggest that crustal thickening mainly takes place in lower crust in the northeastern margin of the Tibetan plateau. The crust along the northeastern margin shows evidence of wholesale block movement, and crustal shortening and thickening seem to be the main deformation features of this region. The GPS data show that the block motion modes and crustal thickening in the Tibetan plateau is closely related to the peripheral tectonic stress field and motion direction of the Indian plate. The Mani-Yushu- Xianshuihe fold belt along the boundary between the Qiangtang block and the Bayan Har block divides the different plateau thickening tectonic environments into the middle-western plateau, the northeastern margin and the southeastern plateau.展开更多
The geological structure background, the crustal structure and the shape of Moho in the northeastern margin of the Qinghai-Tibetan plateau are studied. Based on artificial seismic sounding profile as well as geologica...The geological structure background, the crustal structure and the shape of Moho in the northeastern margin of the Qinghai-Tibetan plateau are studied. Based on artificial seismic sounding profile as well as geological data. The main results are summarized as follows: (1) The geotectonic subdivisions and the characteristics of main deep and large faults in the northeastern margin of the Qinghai-Tibetan plateau are presented; (2) The general features of the Moho are obtained mainly based on artificial seismic sounding data; (3) There exists well corresponding relation between surface faults and some features of the Moho, which suggests that such complex crustal structure might be the preparation environment of strong earthquakes.展开更多
The Middle Triassic Ladinian-Upper Triassic Norian series in the Mesozoic-Cenozoic Ruo’ergai basin of Songpan area is characterized of large thick shallow marine-deep marine fine grained clastic.The strata are region...The Middle Triassic Ladinian-Upper Triassic Norian series in the Mesozoic-Cenozoic Ruo’ergai basin of Songpan area is characterized of large thick shallow marine-deep marine fine grained clastic.The strata are regionally unconformable between each adjacent two of the Middle-Late Triassic fine grained clastic,the Jurassic coal-containing clastic,the Cretaceous-Paleogene variegated coarse clastic。展开更多
Fold-thrust belts are common structural styles under the background of long-term regional tectonic shortening.The northern and northeastern margins of the Qinghai-Tibetan Plateau are located on the edge of the growth ...Fold-thrust belts are common structural styles under the background of long-term regional tectonic shortening.The northern and northeastern margins of the Qinghai-Tibetan Plateau are located on the edge of the growth and expansion of the Qinghai-Tibetan Plateau.Since nearly 10 Ma,some significant and typical fold thrust belt have been formed.The spatial-temporal evolution of these fold-thrust belts and the characteristics of surface deformations are significant issues in geodynamics.In this paper,we use the elastoplastic finite element model with considering the contact nonlinearity to study the spatialtemporal evolution of the fold-thrust belts in the northern and northeastern margins of the Qinghai-Tibetan Plateau,with particular attention to the details of the relationship between the depth and the shallow,the spatialtemporal order,and the characteristics of the surface deformation,etc.,in order to make a relatively complete mechanical interpretation of the spatial-temporal evolution of the foldthrust belts in the northern and northeastern margins of the Qinghai-Tibetan Plateau from the perspective of geodynamics.展开更多
In this paper, the spatial-temporal gravity variation patterns of the northeastern margin of Qinghal-Xizang (Tibet) Plateau in 1992 - 2001 are modeled using bicubic spline interpolation functions and the relations o...In this paper, the spatial-temporal gravity variation patterns of the northeastern margin of Qinghal-Xizang (Tibet) Plateau in 1992 - 2001 are modeled using bicubic spline interpolation functions and the relations of gravity change with seismicity and tectonic movement are discussed preliminarily. The results show as follows: ① Regional gravitational field changes regularly and the gravity abnormity zone or gravity concentration zone appears in the earthquake preparation process; ②In the significant time period, the gravity variation shows different features in the northwest, southeast and northeast parts of the surveyed region respectively, with Lanzhou as its boundary;③The gravity variation distribution is basically identical to the strike of tectonic fault zone of the region, and the contour of gravity variation is closely related to the fault distribution.展开更多
Based on leveling data in 1972 -2011 and relative-gravity data in 1993 -2011, we obtained a longterm vertical crustal-deformation rate of 1.62mm/a and a relative-gravity variation rate of 0.62 × 10^-8 ms^-2a^-1 f...Based on leveling data in 1972 -2011 and relative-gravity data in 1993 -2011, we obtained a longterm vertical crustal-deformation rate of 1.62mm/a and a relative-gravity variation rate of 0.62 × 10^-8 ms^-2a^-1 for the northeastern margin area of Qinghai-Tibet plateau. After removing the contributions from the observed vertical movement and inferred surface denudation, we obtain a gravity-variation rate of 0.73 × 10^-8 ms^-2a^-1 attributable to the mass changes beneath the crust. This positive change suggests that the total mass under the observation stations was gradually increasing. We consider this result to be the gravitational evidence of underplating beneath the study area, and propose that the underplating was caused by collision betwen the Indian plate and Tibetan plateau and by gravitation-potential induced deviatoric stress.展开更多
Fault deformation characteristics in the northern margin of the Tibetan Plateau before the Menyuan Ms6.4 earthquake are investigated through time-series and structural geological analysis based on cross-fault observat...Fault deformation characteristics in the northern margin of the Tibetan Plateau before the Menyuan Ms6.4 earthquake are investigated through time-series and structural geological analysis based on cross-fault observation data from the Qilian Mountain-Haiyuan Fault belt and the West Qinling Fault belt. The results indicate: 1) Group short-term abnormal variations appeared in the Qilian Mountain-Haiyuan Fault belt and the West Qinling Fault belt before the Menyuan Ms6.4 earthquake. 2) More medium and short-term anomalies appear in the middle-eastern segment of the Qilian Mountain Fault belt and the West Qinling Fault belt, suggesting that the faults' activities are strong in these areas. The faults' activities in the middle-eastern segment of the Qilian Fault belt result from extensional stress, as before the earthquake, whereas those in the West Qinling Fault belt are mainly compressional. 3) In recent years, moderate-strong earthquakes occurred in both the Kunlun Mountain and the Qilian Mountain Fault belts, and some energy was released. It is possible that the seismicity moved eastward under this regime. Therefore, we should pay attention to the West Qinling Mountain area where an Ms6-7 earthquake could occur in future.展开更多
The equation for determining cross-fault representative value is calculated based on hanging wall and foot wall reference level surfaces. The cross-fault data reliability are analyzed base on the stability of referenc...The equation for determining cross-fault representative value is calculated based on hanging wall and foot wall reference level surfaces. The cross-fault data reliability are analyzed base on the stability of reference datum and observation points, thereby facili- tating plotting of the representative value curves after removing interference. The spatial and temporal characteristics of fault deformation abnormalities before the 2016 Menyuan Ms6.4 earthquake, as well as the fault-movement characteristics reflected by representa- tive value, are summarized. The results show that many site trends had changed 1-3 years before the Menyuan Ms6.4 earthquake in the Qilian Fault, reflecting certain background abnormalities. The short-term abnormalities centrally had appeared in the 6 months to 1 year period before the earthquake near and in the neighborhood of the source region, demonstrating a significantly increased number of short-term abnormalities. Many sites near and in the neighborhood of the source region had strengthened inverse activities or had changed from positive to inverse activities in the most recent 2-3 years, which reflect stress-field enhancements or adjustment features.展开更多
A lot of new gold deposits have been found on the eastern margin of the Qinghai-Tibet Plateau during the past two decades. Among them, three main types of gold deposits have been recognized, including quartz-vein-type...A lot of new gold deposits have been found on the eastern margin of the Qinghai-Tibet Plateau during the past two decades. Among them, three main types of gold deposits have been recognized, including quartz-vein-type, shear- zone-type and porphyry-type. The former two types of gold deposits are mainly hosted within metamorphic rocks, while the latter is related to Cenozoic magmatism. Although all of these gold deposits are believed to have been formed during the uplift process of the Qinghai-Tibet Plateau in the Cenozoic era (Wang et al., 2002b), precise isotopic age constraints have still been lacking until quite recently. This paper presents new 40Ar/39Ar data of some gold deposits on the eastern margin of the Qinghai-Tibet Plateau, which indicate that gold mineralization in the region occurred in response to the episodic stages of the orogenies. Recently obtained 40Ar/39Ar data on quartz and feldspars from several gold deposits, such as the Sandiao deposit, the Baijintaizi deposit, the Pusagang deposits, provide new constraints on gold mineralization on the eastern margin of the Qinghai-Tibet Plateau. Geochronological studies of gold deposits along the Daduhe River indicate that there are three stages of gold mineralization. The early two stages occurred as early as 65.1 Ma in the Shuibaiyang deposit and 58.95 Ma in the Ruoji deposit, while the latter stage occurred as late as 25.35 Ma in Baijintaizi and 24.70 Ma in Sandiao. Isotopic dating of three plagioclases from the Beiya deposit, Zhifanggou deposit and Luobodi deposit and a K-feldspar from the Jinchangqing deposit in Yunnan Province indicates that these deposits were formed at two stages. The Zhifanggou and Jinchangqing deposits have early stage records as old as 58.82 Ma in Zhifanggou and 55.49 Ma in Jinchangqing, but all of the above four deposits in Yunnan have late stage records of 23.18 Ma in Jinchangqing, 24.54 Ma in Zhifanggou, 24.60 Ma in Luobodi and 24.56 Ma in Hongnitang. The above results suggest that the gold deposits on the eastern margin of the Qinghai-Tibet Plateau were formed concentratedly at two main episodes, i.e. the end of the Paleocene (about 58 Ma) and the boundary between the Paleogene and the Neogene (about 25 Ma). The later episode appears to be looks like more important and was coupled with the Sichuan movement, which was extensively activated at that period. The beginning of the Cenozoic Era (about 65 Ma) might be another episode of gold mineralization, but only one deposit (Shuibaiyang) in this study has been proved to have been be formed at this stage and might be earlier than the initial collision between the Indian Plate and the Eurasia Plate. In view of geology, the above three episodes of gold mineralization are associated with three events of tectonic- magmatism and/or fluid events. Even though the gold deposits (for example, the Shuibaiyang deposit, Ruoji deposit and Pusagang deposit) were formed at different episodes, all of them are genetically related to tectonic movements in large- scale shear zones. It looks like theat tectonic events (including large-scale strike-slip) between Paleogene and Neogene had a wide influence upon gold mineralization, with new deposits formed and old deposits enriched or superimposed to be a higher grade by new stage of mineralization. The above data suggest that gold deposits were not only concentrated in some areas, but also formed mainly at different boundaries of geological times, indicating that there existed some peak stages of gold mineralization (metallogenic episodes), and that the gold deposits were formed mainly by episodic mineralization.展开更多
The special seismic tectonic environment and frequent seismicity in the southeastern margin of the Qinghai-Tibet Plateau show that this area is an ideal location to study the present tectonic movement and background o...The special seismic tectonic environment and frequent seismicity in the southeastern margin of the Qinghai-Tibet Plateau show that this area is an ideal location to study the present tectonic movement and background of strong earthquakes in China's Mainland and to predict future strong earthquake risk zones. Studies of the structural environment and physical characteristics of the deep structure in this area are helpful to explore deep dynamic effects and deformation field characteristics, to strengthen our understanding of the roles of anisotropy and tectonic deformation and to study the deep tectonic background of the seismic origin of the block's interior. In this paper, the three-dimensional (3D) P-wave velocity structure of the crust and upper mantle under the southeastern margin of the Qinghai-Tibet Plateau is obtained via observational data from 224 permanent seismic stations in the regional digital seismic network of Yunnan and Sichuan Provinces and from 356 mobile China seismic arrays in the southern section of the north-south seismic belt using a joint inversion method of the regional earthquake and teleseismic data. The results indicate that the spatial distribution of the P-wave velocity anomalies in the shallow upper crust is closely related to the surface geological structure, terrain and lithology. Baoxing and Kangding, with their basic volcanic rocks and volcanic clastic rocks, present obvious high-velocity anomalies. The Chengdu Basin shows low-velocity anomalies associated with the Quaternary sediments. The Xichang Mesozoic Basin and the Butuo Basin are characterised by low- velocity anomalies related to very thick sedimentary layers. The upper and middle crust beneath the Chuan-Dian and Songpan-Ganzi Blocks has apparent lateral heterogeneities, including low-velocity zones of different sizes. There is a large range of low-velocity layers in the Songpan-Ganzi Block and the sub-block northwest of Sichuan Province, showing that the middle and lower crust is relatively weak. The Sichuan Basin, which is located in the western margin of the Yangtze platform, shows high-velocity characteristics. The results also reveal that there are continuous low-velocity layer distributions in the middle and lower crust of the Daliangshan Block and that the distribution direction of the low-velocity anomaly is nearly SN, which is consistent with the trend of the Daliangshan fault. The existence of the low-velocity layer in the crust also provides a deep source for the deep dynamic deformation and seismic activity of the Daliangshan Block and its boundary faults. The results of the 3D P-wave velocity structure show that an anomalous distribution of high-density, strong-magnetic and high-wave velocity exists inside the crust in the Panxi region. This is likely related to late Paleozoic mantle plume activity that led to a large number of mafic and ultra-mafic intrusions into the crust. In the crustal doming process, the massive intrusion of mantle-derived material enhanced the mechanical strength of the crustal medium. The P-wave velocity structure also revealed that the upper mantle contains a low-velocity layer at a depth of 80-120 km in the Panxi region. The existence of deep faults in the Panxi region, which provide conditions for transporting mantle thermal material into the crust, is the deep tectonic background for the area's strong earthquake activity.展开更多
The magnetotelluric (MT) survey along the Zhada (札达)-Quanshui (泉水) Lake profile on the western margin of the Qinghai (青海)-Tibet plateau shows that the study area is divided into three tectonic provinces ...The magnetotelluric (MT) survey along the Zhada (札达)-Quanshui (泉水) Lake profile on the western margin of the Qinghai (青海)-Tibet plateau shows that the study area is divided into three tectonic provinces by the Yalung Tsangpo and Bangong (班公)-Nujiang (怒江) sutures. From south to north these are the Himalayan terrane, Gangdise terrane, and Qiangtang (羌塘) terrane. For the study area, there are widespread high-conductivity layers in the mid and lower crust, the top layers of which fluctuate intensively. The high-conductivity layer within the Gangdise terrane is deeper than those within the Qiangtang terrane and the Himalaya terrane, and the deepest high-conductivity layer is to the south of the Bangong-Nujiang suture. The top surface of the high-conductivity layer in the south of the Bangong-Nujiang suture is about 20 km lower than that in the north of it. The high-conductivity layer within the Gangdise terrane dips toward north and there are two high-conductivity layers within the crust of the southern Qiangtang terrane. In the upper crust along the profile, there are groups of lateral electrical gradient zones or distortion zones of different scales and occurrence indicating the distribution of faults and sutures along the profile. According to the electrical structure, the structural characteristics and space distribution of the Yalung Tsangpo suture, Bangong.Nujiang suture, and the major faults of Longmucuo (龙木错) and Geerzangbu are inferred.展开更多
The Northeastern margin of Qinghai—Tibet plateau,here refers to the region bounded by Western Qinling fault zone and Longshoushan—Liupanshan tectonic zone, where obliquely compression deformation occurred with the N...The Northeastern margin of Qinghai—Tibet plateau,here refers to the region bounded by Western Qinling fault zone and Longshoushan—Liupanshan tectonic zone, where obliquely compression deformation occurred with the NE\|trending maximum principle axis of stress, with Ordos Massif to the east, Alaxa Block to the north, and Qinghai—Tibet plateau to the southwest. The main structure in this region is Haiyuan—Gulang transpression zone. It consists of a series of active faults: the Haiyuan fault zone, the Tianjingshan fault zone, the Yantongshan fault zone and the Niushoushan—Luoshan fault zone.展开更多
The Panxi Rift Zone is a famous metallogenic province in Southwest China. Continental rifting developed in Hercynian period (P 2, 260~250Ma) accompany with a series of basic\|ultrabasic rocks. Various in lithologies,...The Panxi Rift Zone is a famous metallogenic province in Southwest China. Continental rifting developed in Hercynian period (P 2, 260~250Ma) accompany with a series of basic\|ultrabasic rocks. Various in lithologies, such as layered intrusions (V\|Ti\|Fe formation), small\|sized mafic\|ultramafic bodies (stocks) and large\|scale basalt (Emeishan Basalt) are constituted of a complete melanocratic rock system.Most of Cu\|Ni\|PGE sulfide deposits are related to small\|sized ultramafic rock bodies. It is a perfect possibility for them to be an affinity of basic eruptive lava and for the neck facies. But in ① Panzhihua\|Center Yunnan Province, the Gaojiacun, also Jinbaoshan, as large stratiform basic\|ultrabasic complex used to be thought that is older one intruded to basement rocks in Precambrian. However, new evidences suggest it is similar with the small\|sized ultramafic rock bodies containing Cu\|Ni\|PGE, and also the both are affinity of the Emeishan Basalt; ② Miyi district, Cu\|Pt mineralization was discovered in the Xinjie bedded basic complex, and in where ophitic olivine\|pyroxenite\|peridotite facies are exactly Pt\|bearing layers; ③ Longzhoushan district, we have recently researched basic\|ultrabasic clusters which intruded into fracture zones, and Cu\|Ni\|Pt, Pd mineralization developed at the salbands.Generally, the basalt is poor in PGE and rich in Cu. It is suggested as the result of PGE dispersion\|concentration processing in the melanocratic rock system when rifting happened.展开更多
[Objective] The Doppler radar data about a super monomer hailstorms in the northeastern Qinghai-Tibet Plateau in the Zhongchuan Airport in the Lanzhou City on September 6,2010 was studied.[Method] By dint of routine d...[Objective] The Doppler radar data about a super monomer hailstorms in the northeastern Qinghai-Tibet Plateau in the Zhongchuan Airport in the Lanzhou City on September 6,2010 was studied.[Method] By dint of routine data and radar data,the low vortex shear line type and the super monomer hailstorm around the Zhongchuan Airport in the Lanzhou City on September 6,2010 were expounded.Basic product and secondary product of Doppler radar were used in this process to reflect the characteristics of strong convection weather.Some characteristics of this process shall be explored.[Result] A small gush of cold air from the cold vortex of 500 hPa in the middle and high layer provided impacts.The warm shear line provided water vapor and energy in the 700 hPa.There was strong convective weather in the upper air.Such 10 minutes of hailstorm was rarely seen in the drought land in the northwest.The characteristics of the strong convection were distinct and typical.The front showed no echo form.However,it can not be reflected in 'strong wedge' in another form.In this process,characteristics of BWER and middle scale cyclone were distinct.And this was a typical hailstorm process caused by super monomer.[Conclusion] The study provided some helpful references for the forecast of strong convection weather in the Zhongchuan Airport in Lanzhou City.展开更多
On the basis of Discontinuous Deformation Analysis (DDA), and considering the moderate intrusion of specific block boundaries to different extents, the first-order block motion model is established for the northeaster...On the basis of Discontinuous Deformation Analysis (DDA), and considering the moderate intrusion of specific block boundaries to different extents, the first-order block motion model is established for the northeastern margin of Qinghai-Xizang(Tibet) block and the kinematical model for depicting deformation of small regions as well by using GPS observations of three periods (1991, 1999 and 2001). By simulating, we obtained the motion features of the first-order blocks between the large WWN faults on the sides of the studied region, the distribution features of the principal strain rate field and the inhomogeneous motion features with space-time of the faults in the northern boundary of the Qinghai-Xizang (Tibet) block.展开更多
A series of large strike-slip and thrust faults have developed in the northeastern margin of the Tibetan Plateau since the Late Cenozoic,with strong and active tectonic activity and frequent occurrences of large earth...A series of large strike-slip and thrust faults have developed in the northeastern margin of the Tibetan Plateau since the Late Cenozoic,with strong and active tectonic activity and frequent occurrences of large earthquakes.Modulation of regional tectonic stress distribution,strain fields,and seismic hazards has not been well studied.This study introduces a three-dimensional viscoelastic finite element numerical model to calculate crustal stress and strain rate fields under current tectonic loading.The preliminary results show that the direction of the horizontal principal compressive stress rate and compressive horizontal principal strain rate in the northeastern margin of the Tibetan Plateau rotate clockwise as a whole,and this rotation is more significant in the southeast direction because of the block of the Alxa and the Ordos blocks.The NE-SW horizontal principal compressive stress rate and SE horizontal tensile stress rate dominate the entire study region.The maximum value of the horizontal principal compressive strain rate at a depth of 0 km in the model is approximately 4×10^(-8)yr^(-1)near the East Kunlun fault and is smaller in the stable Alxa and Ordos blocks at approximately 1×10^(-8)yr^(-1).The calculated regional stress state is in good agreement with the actual focal mechanism solution,indicating that strike-slip and thrust stress fields dominate the northeastern margin of the Tibetan Plateau.The Altyn Tagh,East Kunlun,and Haiyuan faults demonstrate that the maximum shear strain rate gradually decreases eastward,and the decrease in the maximum shear strain rate value is absorbed by orogenic uplift and crustal shortening at its boundaries.The western section of the Altyn Tagh fault,west-to-middle sections of the East Kunlun fault,and west-to-middle sections of the Haiyuan fault will have high seismic hazards in the future.展开更多
Decoding the variation laws of the deformation field before strong earthquakes has long been recognized as an essential issue in earthquake prediction research. In this paper, the temporal and spatial distribution cha...Decoding the variation laws of the deformation field before strong earthquakes has long been recognized as an essential issue in earthquake prediction research. In this paper, the temporal and spatial distribution characteristics of deformation anomalies in the northeastern margin of the Qinghai-Tibetan Plateau before and after the Menyuan M_(S)6.9 earthquake were studied by using the Fisher statistical test method. By analyzing the characteristics of these anomalies, we found that: 1) The deformation anomalies are mainly distributed in the marginal front area of the Qinghai-Tibetan Plateau, where short-term deformation anomalies are prone to occur due to a high gradient of gravity;2) The deformation anomalies along the northeastern margin of the Qinghai-Tibetan Plateau are characterized by spatial propagation, and the migration rate is about 2.4 km/d. The propagation pattern is counterclockwise, consistent with the migration direction of M_(S)≥ 6.0 earthquakes;3) The time and location of the Menyuan earthquake are related to the group migration of earthquakes with M_(S)≥ 6.0. Finally,based on the results of gravity field variation and the theory of crust stress wave, the law of deformation anomaly distribution was discussed. We suggest that both the deformation propagation along the northeastern margin of the Qinghai-Tibetan Plateau and the earthquake migration are possibly associated with the variation of the stress field caused by subsurface mass flow.展开更多
Using seismic data of about one year recorded by 18 broadband stations of ASCENT project, we obtained 2547 receiver func- tions in the northeastern Tibetan Plateau. The Moho depths under 14 stations were calculated by...Using seismic data of about one year recorded by 18 broadband stations of ASCENT project, we obtained 2547 receiver func- tions in the northeastern Tibetan Plateau. The Moho depths under 14 stations were calculated by applying the H-x domain search algorithm. The Moho depths under the stations with lower signal-noise ratio (SNR) were estimated by the time delay of the PS conversion. Results show that the Moho depth varies in a range of -40--60 kin. The Moho near the Haiyuan fault is vague, and its depth is larger than those on its two sides. In the Qinling-Qilian Block, the Moho becomes shallower gradually from west to east. To the east of 105~E, the average depth of the Moho is 45 km, whereas the west is 50 km or even deeper. Combining our results with surface wave research, we suggest a boundary between the Qinling and the Qilian Mountains at around 105~E. S wave velocities beneath 15 stations have been obtained through a linear inversion by using Crust2.0 as an ini- tial model, and the crustal thickness that was derived by H-x domain search algorithm was also taken into account. The results are very similar to the results of previous active source studies. The resulting figure indicates that low velocity layers devel- oped in the middle and lower crust beneath the transition zone of the Tibet Block and western Qinling, which may be related to regional faults and deep earth dynamics. The velocity of the middle and lower crust increases from the Songpan Block to the northeastern margin of Tibetan Plateau. Based on the velocity of the crust, the distribution of the low velocity zone and the composition of the curst (Poisson's ratio), we infer that the crust thickening results from the crust shortening along the direc- tion of compression.展开更多
Based on the recent observations about the movement and rheological structure of the lithosphere and deformation pattern of the crust, we developed a three-dimensional finite element model for the northeastern margin ...Based on the recent observations about the movement and rheological structure of the lithosphere and deformation pattern of the crust, we developed a three-dimensional finite element model for the northeastern margin of the Tibetan Plateau.The model considered the impacts of both external and internal conditions, including mantle convection, gravitational potential energy and block interactions. We compared the simulated surface movement rates to the observed GPS velocities, and the results revealed that crustal movement gradually decreased toward the edge of the plateau. The factors controlling this pattern are the interactions of adjacent blocks, gravitational potential energy of the plateau, and also mantle convection as well. Additionally,according to the observation that there was an apparent difference between the horizontal movement rate of the lithosphere and convective velocity of the underlying mantle, and also based on the results of seismic anisotropy studies that suggest different strengths and deformation regimes of the lithosphere in different tectonic blocks, we proposed that the impact of mantle convection on the lithosphere may have varied in space, and introduced a parameter named mantle convection intensity factor in numerical simulations. Our simulation results show consistent surface movement rates with GPS observations, which further supports the viewpoint of seismic anisotropy studies, i.e., the degree of coupling between the crust and mantle varies significantly among different blocks.展开更多
基金supported by the Fundamental Research Funds in Institute of Geology, China Earthquake Administration (Grant No. IGCEA1220)Special Project on Earthquake Research (Grant No. 201308012)+1 种基金National Natural Science Foundation of China (Grant Nos. 41202158, 41372220 & 41590861)Science for Earthquake Resilience (Grant No. XH14052)
文摘The kinematic characteristics of the Sanguankou-Niushoushan fault(SGK-NSSF) are of great significance to the understanding of the extension of the arc tectonic belt in the northeastern margin of the Tibet Plateau. Using field surveys and various data collection methods, including large-scale geological mapping, measurement of typical topographies, and dating of sedimentary strata, it was determined that the SGK-NSSF exhibits obvious dextral strike-slip characteristics and thus is not a sinistral strike-slip fault, as believed by previous researchers. The results of this study show that the geological boundaries for the Paleozoic, Mesozoic, and Cenozoic eras were all dextrally dislocated by the fault, with the faulted displacements being similar. The maximum strike-slip displacement of the fault, after elimination of topographic effects, was found to be 961±6 m. The Sanguankou fault at the northern section exhibits obvious characteristics of more recent activities, with a series of small gullies having undergone synchronized dextral writhing after traversing the fault. The average horizontal slip rate of the fault since the late Quaternary was determined to be approximately 0.35 mm/a. The pre-existing fold structures formed during the late Pliocene were dislocated by the fault and became ex situ, indicating that dextral strike-slip of the fault could not have occurred prior to the late Pliocene. The maximum displacements and average slip rates were used to estimate the onset time of the dextral strike-slip activities of the fault as being after 2.7 Ma. In this study, the understanding of previous researchers concerning the extension in the northeastern margin of the Tibet Plateau was combined with analyses of the successive relationships between fold deformations and fault activities. This led to the finding that the extension in the northeastern margin of the Tibet Plateau reached the vicinity of the SGK-NSSF during the late Pliocene(~2.7 Ma), causing regional uplift and fold deformations of the strata there. During the early Quaternary, the northeastern compression of the Tibet Plateau and the counterclockwise rotation of the Ordos block collectively resulted in the dextral strike-slip activities of the SGK-NSSF. This then formed the foremost margin of the arc tectonic belt extension in the northeastern margin of the Tibet Plateau.
基金supported by the project Active Fault Survey in Chinese mainl and-DSS profile in the central Longmen-shan from CEA (2010)National Natural Science Foundation of China (No. 40974033)
文摘This paper uses deep seismic sounding (DSS) data to contrast and analyze the crustal structures of three plateau basins (Songpan-Garze, Qaidam, Longzhong) in the northeastern margin of the Qinghai-Xizang (Tibetan) plateau, as well as two stable cratonic basins (Ordos, Sichuan) in its peripheral areas. Plateau basin crustal structures, lithological variations and crustal thickening mechanisms were investigated. The results show that, compared to the peripheral stable cratonic basins, the crystalline crusts of plateau basins in the northeastern margin are up to 10 15 km thicker, and the relative medium velocity difference is about 5% less. The medium velocity change in crustal layers of plateau basin indicates that the upper crust undergoes brittle deformation, whereas the lower crust deforms plastically with low velocity. The middle crust shows a brittle-to-plastic transition zone in this region. Thickening in the lower crust (about 5 10 km), and rheological characteristics that show low- medium velocity (relatively reduced by 7%), suggest that crustal thickening mainly takes place in lower crust in the northeastern margin of the Tibetan plateau. The crust along the northeastern margin shows evidence of wholesale block movement, and crustal shortening and thickening seem to be the main deformation features of this region. The GPS data show that the block motion modes and crustal thickening in the Tibetan plateau is closely related to the peripheral tectonic stress field and motion direction of the Indian plate. The Mani-Yushu- Xianshuihe fold belt along the boundary between the Qiangtang block and the Bayan Har block divides the different plateau thickening tectonic environments into the middle-western plateau, the northeastern margin and the southeastern plateau.
基金National Key Research Development Project(95-13-02-02).Contribution No.LC2000052,Lanzhou Institute of Seismology,China SeismologicalBureau.
文摘The geological structure background, the crustal structure and the shape of Moho in the northeastern margin of the Qinghai-Tibetan plateau are studied. Based on artificial seismic sounding profile as well as geological data. The main results are summarized as follows: (1) The geotectonic subdivisions and the characteristics of main deep and large faults in the northeastern margin of the Qinghai-Tibetan plateau are presented; (2) The general features of the Moho are obtained mainly based on artificial seismic sounding data; (3) There exists well corresponding relation between surface faults and some features of the Moho, which suggests that such complex crustal structure might be the preparation environment of strong earthquakes.
文摘The Middle Triassic Ladinian-Upper Triassic Norian series in the Mesozoic-Cenozoic Ruo’ergai basin of Songpan area is characterized of large thick shallow marine-deep marine fine grained clastic.The strata are regionally unconformable between each adjacent two of the Middle-Late Triassic fine grained clastic,the Jurassic coal-containing clastic,the Cretaceous-Paleogene variegated coarse clastic。
基金financially supported by the National Science Foundation of China (42074117)supported by the Fundamental Research Funds for the Central Universities。
文摘Fold-thrust belts are common structural styles under the background of long-term regional tectonic shortening.The northern and northeastern margins of the Qinghai-Tibetan Plateau are located on the edge of the growth and expansion of the Qinghai-Tibetan Plateau.Since nearly 10 Ma,some significant and typical fold thrust belt have been formed.The spatial-temporal evolution of these fold-thrust belts and the characteristics of surface deformations are significant issues in geodynamics.In this paper,we use the elastoplastic finite element model with considering the contact nonlinearity to study the spatialtemporal evolution of the fold-thrust belts in the northern and northeastern margins of the Qinghai-Tibetan Plateau,with particular attention to the details of the relationship between the depth and the shallow,the spatialtemporal order,and the characteristics of the surface deformation,etc.,in order to make a relatively complete mechanical interpretation of the spatial-temporal evolution of the foldthrust belts in the northern and northeastern margins of the Qinghai-Tibetan Plateau from the perspective of geodynamics.
文摘In this paper, the spatial-temporal gravity variation patterns of the northeastern margin of Qinghal-Xizang (Tibet) Plateau in 1992 - 2001 are modeled using bicubic spline interpolation functions and the relations of gravity change with seismicity and tectonic movement are discussed preliminarily. The results show as follows: ① Regional gravitational field changes regularly and the gravity abnormity zone or gravity concentration zone appears in the earthquake preparation process; ②In the significant time period, the gravity variation shows different features in the northwest, southeast and northeast parts of the surveyed region respectively, with Lanzhou as its boundary;③The gravity variation distribution is basically identical to the strike of tectonic fault zone of the region, and the contour of gravity variation is closely related to the fault distribution.
基金supported by the National Natural Science Foundation of China(40874035)
文摘Based on leveling data in 1972 -2011 and relative-gravity data in 1993 -2011, we obtained a longterm vertical crustal-deformation rate of 1.62mm/a and a relative-gravity variation rate of 0.62 × 10^-8 ms^-2a^-1 for the northeastern margin area of Qinghai-Tibet plateau. After removing the contributions from the observed vertical movement and inferred surface denudation, we obtain a gravity-variation rate of 0.73 × 10^-8 ms^-2a^-1 attributable to the mass changes beneath the crust. This positive change suggests that the total mass under the observation stations was gradually increasing. We consider this result to be the gravitational evidence of underplating beneath the study area, and propose that the underplating was caused by collision betwen the Indian plate and Tibetan plateau and by gravitation-potential induced deviatoric stress.
基金funded by the Special Project of Basic Work of Science and Technology“Compilation and dataprocessing of modern vertical deformation Atlas of Chinese mainland”(2015FY210400)the Science and Technology Innovation Fund(FMC2015013)of the First Crust Monitoring and Application Center,China Earthquake Administration
文摘Fault deformation characteristics in the northern margin of the Tibetan Plateau before the Menyuan Ms6.4 earthquake are investigated through time-series and structural geological analysis based on cross-fault observation data from the Qilian Mountain-Haiyuan Fault belt and the West Qinling Fault belt. The results indicate: 1) Group short-term abnormal variations appeared in the Qilian Mountain-Haiyuan Fault belt and the West Qinling Fault belt before the Menyuan Ms6.4 earthquake. 2) More medium and short-term anomalies appear in the middle-eastern segment of the Qilian Mountain Fault belt and the West Qinling Fault belt, suggesting that the faults' activities are strong in these areas. The faults' activities in the middle-eastern segment of the Qilian Fault belt result from extensional stress, as before the earthquake, whereas those in the West Qinling Fault belt are mainly compressional. 3) In recent years, moderate-strong earthquakes occurred in both the Kunlun Mountain and the Qilian Mountain Fault belts, and some energy was released. It is possible that the seismicity moved eastward under this regime. Therefore, we should pay attention to the West Qinling Mountain area where an Ms6-7 earthquake could occur in future.
基金supported by the Seismic Regime Tracking Project in the Year of 2016,China Earthquake Administration(2016010205 and 2016020204)
文摘The equation for determining cross-fault representative value is calculated based on hanging wall and foot wall reference level surfaces. The cross-fault data reliability are analyzed base on the stability of reference datum and observation points, thereby facili- tating plotting of the representative value curves after removing interference. The spatial and temporal characteristics of fault deformation abnormalities before the 2016 Menyuan Ms6.4 earthquake, as well as the fault-movement characteristics reflected by representa- tive value, are summarized. The results show that many site trends had changed 1-3 years before the Menyuan Ms6.4 earthquake in the Qilian Fault, reflecting certain background abnormalities. The short-term abnormalities centrally had appeared in the 6 months to 1 year period before the earthquake near and in the neighborhood of the source region, demonstrating a significantly increased number of short-term abnormalities. Many sites near and in the neighborhood of the source region had strengthened inverse activities or had changed from positive to inverse activities in the most recent 2-3 years, which reflect stress-field enhancements or adjustment features.
基金the Major State BasicResearch Program of China(G19992043203)underthe State Science and Technology Commission,the National Natural Science Foundation of China(No.40202012)+1 种基金the State Planning Commission(Special Program 98-1) the Ministry of Land and Resources(K1.4-3-4).
文摘A lot of new gold deposits have been found on the eastern margin of the Qinghai-Tibet Plateau during the past two decades. Among them, three main types of gold deposits have been recognized, including quartz-vein-type, shear- zone-type and porphyry-type. The former two types of gold deposits are mainly hosted within metamorphic rocks, while the latter is related to Cenozoic magmatism. Although all of these gold deposits are believed to have been formed during the uplift process of the Qinghai-Tibet Plateau in the Cenozoic era (Wang et al., 2002b), precise isotopic age constraints have still been lacking until quite recently. This paper presents new 40Ar/39Ar data of some gold deposits on the eastern margin of the Qinghai-Tibet Plateau, which indicate that gold mineralization in the region occurred in response to the episodic stages of the orogenies. Recently obtained 40Ar/39Ar data on quartz and feldspars from several gold deposits, such as the Sandiao deposit, the Baijintaizi deposit, the Pusagang deposits, provide new constraints on gold mineralization on the eastern margin of the Qinghai-Tibet Plateau. Geochronological studies of gold deposits along the Daduhe River indicate that there are three stages of gold mineralization. The early two stages occurred as early as 65.1 Ma in the Shuibaiyang deposit and 58.95 Ma in the Ruoji deposit, while the latter stage occurred as late as 25.35 Ma in Baijintaizi and 24.70 Ma in Sandiao. Isotopic dating of three plagioclases from the Beiya deposit, Zhifanggou deposit and Luobodi deposit and a K-feldspar from the Jinchangqing deposit in Yunnan Province indicates that these deposits were formed at two stages. The Zhifanggou and Jinchangqing deposits have early stage records as old as 58.82 Ma in Zhifanggou and 55.49 Ma in Jinchangqing, but all of the above four deposits in Yunnan have late stage records of 23.18 Ma in Jinchangqing, 24.54 Ma in Zhifanggou, 24.60 Ma in Luobodi and 24.56 Ma in Hongnitang. The above results suggest that the gold deposits on the eastern margin of the Qinghai-Tibet Plateau were formed concentratedly at two main episodes, i.e. the end of the Paleocene (about 58 Ma) and the boundary between the Paleogene and the Neogene (about 25 Ma). The later episode appears to be looks like more important and was coupled with the Sichuan movement, which was extensively activated at that period. The beginning of the Cenozoic Era (about 65 Ma) might be another episode of gold mineralization, but only one deposit (Shuibaiyang) in this study has been proved to have been be formed at this stage and might be earlier than the initial collision between the Indian Plate and the Eurasia Plate. In view of geology, the above three episodes of gold mineralization are associated with three events of tectonic- magmatism and/or fluid events. Even though the gold deposits (for example, the Shuibaiyang deposit, Ruoji deposit and Pusagang deposit) were formed at different episodes, all of them are genetically related to tectonic movements in large- scale shear zones. It looks like theat tectonic events (including large-scale strike-slip) between Paleogene and Neogene had a wide influence upon gold mineralization, with new deposits formed and old deposits enriched or superimposed to be a higher grade by new stage of mineralization. The above data suggest that gold deposits were not only concentrated in some areas, but also formed mainly at different boundaries of geological times, indicating that there existed some peak stages of gold mineralization (metallogenic episodes), and that the gold deposits were formed mainly by episodic mineralization.
基金supported by China earthquake scientific array exploration Southern section of North South seismic belt(201008001)Northern section of North South seismic belt(20130811)+1 种基金National Natural Science Foundation of China(41474057)Science for Earthquake Resllience of China Earthquake Administration(XH15040Y)
文摘The special seismic tectonic environment and frequent seismicity in the southeastern margin of the Qinghai-Tibet Plateau show that this area is an ideal location to study the present tectonic movement and background of strong earthquakes in China's Mainland and to predict future strong earthquake risk zones. Studies of the structural environment and physical characteristics of the deep structure in this area are helpful to explore deep dynamic effects and deformation field characteristics, to strengthen our understanding of the roles of anisotropy and tectonic deformation and to study the deep tectonic background of the seismic origin of the block's interior. In this paper, the three-dimensional (3D) P-wave velocity structure of the crust and upper mantle under the southeastern margin of the Qinghai-Tibet Plateau is obtained via observational data from 224 permanent seismic stations in the regional digital seismic network of Yunnan and Sichuan Provinces and from 356 mobile China seismic arrays in the southern section of the north-south seismic belt using a joint inversion method of the regional earthquake and teleseismic data. The results indicate that the spatial distribution of the P-wave velocity anomalies in the shallow upper crust is closely related to the surface geological structure, terrain and lithology. Baoxing and Kangding, with their basic volcanic rocks and volcanic clastic rocks, present obvious high-velocity anomalies. The Chengdu Basin shows low-velocity anomalies associated with the Quaternary sediments. The Xichang Mesozoic Basin and the Butuo Basin are characterised by low- velocity anomalies related to very thick sedimentary layers. The upper and middle crust beneath the Chuan-Dian and Songpan-Ganzi Blocks has apparent lateral heterogeneities, including low-velocity zones of different sizes. There is a large range of low-velocity layers in the Songpan-Ganzi Block and the sub-block northwest of Sichuan Province, showing that the middle and lower crust is relatively weak. The Sichuan Basin, which is located in the western margin of the Yangtze platform, shows high-velocity characteristics. The results also reveal that there are continuous low-velocity layer distributions in the middle and lower crust of the Daliangshan Block and that the distribution direction of the low-velocity anomaly is nearly SN, which is consistent with the trend of the Daliangshan fault. The existence of the low-velocity layer in the crust also provides a deep source for the deep dynamic deformation and seismic activity of the Daliangshan Block and its boundary faults. The results of the 3D P-wave velocity structure show that an anomalous distribution of high-density, strong-magnetic and high-wave velocity exists inside the crust in the Panxi region. This is likely related to late Paleozoic mantle plume activity that led to a large number of mafic and ultra-mafic intrusions into the crust. In the crustal doming process, the massive intrusion of mantle-derived material enhanced the mechanical strength of the crustal medium. The P-wave velocity structure also revealed that the upper mantle contains a low-velocity layer at a depth of 80-120 km in the Panxi region. The existence of deep faults in the Panxi region, which provide conditions for transporting mantle thermal material into the crust, is the deep tectonic background for the area's strong earthquake activity.
基金This paper is supported by the National Natural Science Foundation of China (No. 40404006)the Focused Subject Program of Beijing (No. XK104910598).
文摘The magnetotelluric (MT) survey along the Zhada (札达)-Quanshui (泉水) Lake profile on the western margin of the Qinghai (青海)-Tibet plateau shows that the study area is divided into three tectonic provinces by the Yalung Tsangpo and Bangong (班公)-Nujiang (怒江) sutures. From south to north these are the Himalayan terrane, Gangdise terrane, and Qiangtang (羌塘) terrane. For the study area, there are widespread high-conductivity layers in the mid and lower crust, the top layers of which fluctuate intensively. The high-conductivity layer within the Gangdise terrane is deeper than those within the Qiangtang terrane and the Himalaya terrane, and the deepest high-conductivity layer is to the south of the Bangong-Nujiang suture. The top surface of the high-conductivity layer in the south of the Bangong-Nujiang suture is about 20 km lower than that in the north of it. The high-conductivity layer within the Gangdise terrane dips toward north and there are two high-conductivity layers within the crust of the southern Qiangtang terrane. In the upper crust along the profile, there are groups of lateral electrical gradient zones or distortion zones of different scales and occurrence indicating the distribution of faults and sutures along the profile. According to the electrical structure, the structural characteristics and space distribution of the Yalung Tsangpo suture, Bangong.Nujiang suture, and the major faults of Longmucuo (龙木错) and Geerzangbu are inferred.
文摘The Northeastern margin of Qinghai—Tibet plateau,here refers to the region bounded by Western Qinling fault zone and Longshoushan—Liupanshan tectonic zone, where obliquely compression deformation occurred with the NE\|trending maximum principle axis of stress, with Ordos Massif to the east, Alaxa Block to the north, and Qinghai—Tibet plateau to the southwest. The main structure in this region is Haiyuan—Gulang transpression zone. It consists of a series of active faults: the Haiyuan fault zone, the Tianjingshan fault zone, the Yantongshan fault zone and the Niushoushan—Luoshan fault zone.
文摘The Panxi Rift Zone is a famous metallogenic province in Southwest China. Continental rifting developed in Hercynian period (P 2, 260~250Ma) accompany with a series of basic\|ultrabasic rocks. Various in lithologies, such as layered intrusions (V\|Ti\|Fe formation), small\|sized mafic\|ultramafic bodies (stocks) and large\|scale basalt (Emeishan Basalt) are constituted of a complete melanocratic rock system.Most of Cu\|Ni\|PGE sulfide deposits are related to small\|sized ultramafic rock bodies. It is a perfect possibility for them to be an affinity of basic eruptive lava and for the neck facies. But in ① Panzhihua\|Center Yunnan Province, the Gaojiacun, also Jinbaoshan, as large stratiform basic\|ultrabasic complex used to be thought that is older one intruded to basement rocks in Precambrian. However, new evidences suggest it is similar with the small\|sized ultramafic rock bodies containing Cu\|Ni\|PGE, and also the both are affinity of the Emeishan Basalt; ② Miyi district, Cu\|Pt mineralization was discovered in the Xinjie bedded basic complex, and in where ophitic olivine\|pyroxenite\|peridotite facies are exactly Pt\|bearing layers; ③ Longzhoushan district, we have recently researched basic\|ultrabasic clusters which intruded into fracture zones, and Cu\|Ni\|Pt, Pd mineralization developed at the salbands.Generally, the basalt is poor in PGE and rich in Cu. It is suggested as the result of PGE dispersion\|concentration processing in the melanocratic rock system when rifting happened.
文摘[Objective] The Doppler radar data about a super monomer hailstorms in the northeastern Qinghai-Tibet Plateau in the Zhongchuan Airport in the Lanzhou City on September 6,2010 was studied.[Method] By dint of routine data and radar data,the low vortex shear line type and the super monomer hailstorm around the Zhongchuan Airport in the Lanzhou City on September 6,2010 were expounded.Basic product and secondary product of Doppler radar were used in this process to reflect the characteristics of strong convection weather.Some characteristics of this process shall be explored.[Result] A small gush of cold air from the cold vortex of 500 hPa in the middle and high layer provided impacts.The warm shear line provided water vapor and energy in the 700 hPa.There was strong convective weather in the upper air.Such 10 minutes of hailstorm was rarely seen in the drought land in the northwest.The characteristics of the strong convection were distinct and typical.The front showed no echo form.However,it can not be reflected in 'strong wedge' in another form.In this process,characteristics of BWER and middle scale cyclone were distinct.And this was a typical hailstorm process caused by super monomer.[Conclusion] The study provided some helpful references for the forecast of strong convection weather in the Zhongchuan Airport in Lanzhou City.
文摘On the basis of Discontinuous Deformation Analysis (DDA), and considering the moderate intrusion of specific block boundaries to different extents, the first-order block motion model is established for the northeastern margin of Qinghai-Xizang(Tibet) block and the kinematical model for depicting deformation of small regions as well by using GPS observations of three periods (1991, 1999 and 2001). By simulating, we obtained the motion features of the first-order blocks between the large WWN faults on the sides of the studied region, the distribution features of the principal strain rate field and the inhomogeneous motion features with space-time of the faults in the northern boundary of the Qinghai-Xizang (Tibet) block.
基金supported by the National Natural Science Foundation of China for Distinguished Young Scholars(Grant Nos.U2239205,41725017)the National Key Scientific and Technological Infrastructure Project。
文摘A series of large strike-slip and thrust faults have developed in the northeastern margin of the Tibetan Plateau since the Late Cenozoic,with strong and active tectonic activity and frequent occurrences of large earthquakes.Modulation of regional tectonic stress distribution,strain fields,and seismic hazards has not been well studied.This study introduces a three-dimensional viscoelastic finite element numerical model to calculate crustal stress and strain rate fields under current tectonic loading.The preliminary results show that the direction of the horizontal principal compressive stress rate and compressive horizontal principal strain rate in the northeastern margin of the Tibetan Plateau rotate clockwise as a whole,and this rotation is more significant in the southeast direction because of the block of the Alxa and the Ordos blocks.The NE-SW horizontal principal compressive stress rate and SE horizontal tensile stress rate dominate the entire study region.The maximum value of the horizontal principal compressive strain rate at a depth of 0 km in the model is approximately 4×10^(-8)yr^(-1)near the East Kunlun fault and is smaller in the stable Alxa and Ordos blocks at approximately 1×10^(-8)yr^(-1).The calculated regional stress state is in good agreement with the actual focal mechanism solution,indicating that strike-slip and thrust stress fields dominate the northeastern margin of the Tibetan Plateau.The Altyn Tagh,East Kunlun,and Haiyuan faults demonstrate that the maximum shear strain rate gradually decreases eastward,and the decrease in the maximum shear strain rate value is absorbed by orogenic uplift and crustal shortening at its boundaries.The western section of the Altyn Tagh fault,west-to-middle sections of the East Kunlun fault,and west-to-middle sections of the Haiyuan fault will have high seismic hazards in the future.
基金sponsored by the National Natural Science Foundation of China (41330314)。
文摘Decoding the variation laws of the deformation field before strong earthquakes has long been recognized as an essential issue in earthquake prediction research. In this paper, the temporal and spatial distribution characteristics of deformation anomalies in the northeastern margin of the Qinghai-Tibetan Plateau before and after the Menyuan M_(S)6.9 earthquake were studied by using the Fisher statistical test method. By analyzing the characteristics of these anomalies, we found that: 1) The deformation anomalies are mainly distributed in the marginal front area of the Qinghai-Tibetan Plateau, where short-term deformation anomalies are prone to occur due to a high gradient of gravity;2) The deformation anomalies along the northeastern margin of the Qinghai-Tibetan Plateau are characterized by spatial propagation, and the migration rate is about 2.4 km/d. The propagation pattern is counterclockwise, consistent with the migration direction of M_(S)≥ 6.0 earthquakes;3) The time and location of the Menyuan earthquake are related to the group migration of earthquakes with M_(S)≥ 6.0. Finally,based on the results of gravity field variation and the theory of crust stress wave, the law of deformation anomaly distribution was discussed. We suggest that both the deformation propagation along the northeastern margin of the Qinghai-Tibetan Plateau and the earthquake migration are possibly associated with the variation of the stress field caused by subsurface mass flow.
基金financially supported by National Natural Science Foundation of China(Grant No.40930317)CHINARE2012-02-02+1 种基金Project SinoProbe-02-03the NSFC Innovation Research Group Fund(Grant No.41021001)
文摘Using seismic data of about one year recorded by 18 broadband stations of ASCENT project, we obtained 2547 receiver func- tions in the northeastern Tibetan Plateau. The Moho depths under 14 stations were calculated by applying the H-x domain search algorithm. The Moho depths under the stations with lower signal-noise ratio (SNR) were estimated by the time delay of the PS conversion. Results show that the Moho depth varies in a range of -40--60 kin. The Moho near the Haiyuan fault is vague, and its depth is larger than those on its two sides. In the Qinling-Qilian Block, the Moho becomes shallower gradually from west to east. To the east of 105~E, the average depth of the Moho is 45 km, whereas the west is 50 km or even deeper. Combining our results with surface wave research, we suggest a boundary between the Qinling and the Qilian Mountains at around 105~E. S wave velocities beneath 15 stations have been obtained through a linear inversion by using Crust2.0 as an ini- tial model, and the crustal thickness that was derived by H-x domain search algorithm was also taken into account. The results are very similar to the results of previous active source studies. The resulting figure indicates that low velocity layers devel- oped in the middle and lower crust beneath the transition zone of the Tibet Block and western Qinling, which may be related to regional faults and deep earth dynamics. The velocity of the middle and lower crust increases from the Songpan Block to the northeastern margin of Tibetan Plateau. Based on the velocity of the crust, the distribution of the low velocity zone and the composition of the curst (Poisson's ratio), we infer that the crust thickening results from the crust shortening along the direc- tion of compression.
基金supported by the National Natural Science Foundation of China (Grant No. 41504079)the China National Special Fund for Earthquake Scientific Research in Public Interest (Grant No. 201308011)
文摘Based on the recent observations about the movement and rheological structure of the lithosphere and deformation pattern of the crust, we developed a three-dimensional finite element model for the northeastern margin of the Tibetan Plateau.The model considered the impacts of both external and internal conditions, including mantle convection, gravitational potential energy and block interactions. We compared the simulated surface movement rates to the observed GPS velocities, and the results revealed that crustal movement gradually decreased toward the edge of the plateau. The factors controlling this pattern are the interactions of adjacent blocks, gravitational potential energy of the plateau, and also mantle convection as well. Additionally,according to the observation that there was an apparent difference between the horizontal movement rate of the lithosphere and convective velocity of the underlying mantle, and also based on the results of seismic anisotropy studies that suggest different strengths and deformation regimes of the lithosphere in different tectonic blocks, we proposed that the impact of mantle convection on the lithosphere may have varied in space, and introduced a parameter named mantle convection intensity factor in numerical simulations. Our simulation results show consistent surface movement rates with GPS observations, which further supports the viewpoint of seismic anisotropy studies, i.e., the degree of coupling between the crust and mantle varies significantly among different blocks.