Prediction of atomization characteristics of pressure swirl nozzle with different structures

The structure of the pressure swirl nozzle is an important factor affecting its spray performance.This work aims to study pressure swirl nozzles with different structures by experiment and simulation.In the experiment,10 nozzles with different structures are designed to comprehensively cover various geometric factors.In terms of simulation,steady-state simulation with less computational complexity is used to study the flow inside the nozzle.The results show that the diameter of the inlet and outlet,the direction of the inlet,the diameter of the swirl chamber,and the height of the swirl chamber all affect the atomization performance,and the diameter of the inlet and outlet has a greater impact.It is found that under the same flow rate and pressure,the geometric differences do have a significant impact on the atomization characteristics,such as spray angle and SMD(Sauter mean diameter).Specific nozzle structures can be customized according to the actual needs.Data analysis shows that the spray angle is related to the swirl number,and the SMD is related to turbulent kinetic energy.Through data fitting,the equations for predicting the spray angle and the SMD are obtained.The error range of the fitting equation for the prediction of spray angle and SMD is within 15% and 10% respectively.The prediction is expected to be used in engineering to estimate the spray performance at the beginning of a real project.

Design and Fluid-Dynamic Analysis of a Flushing Nozzle for Drilling Applications

The actuator is a key component of the creaming tool in drilling applications.Its jet performances determine the effective reaming efficiency.In this work,a new selective reaming tool is proposed and the RNG k-εturbulence model is used to calculate its internal and externalflowfields.In particular,special attention is paid to the design of theflushing nozzle.The results show that the jet originating from theflushing nozzle has a significant influence on rock cutting and blade cooling effects.In turn,the jet performances depend on geometric structure of the creaming actuator.In this framework,a conical-cylindrical nozzle with a diameter of 7 mm is initially considered as a basis to implement a strategy to optimize the structural parameters of the reaming actuator,and improve the related side tracking reconstruction technology.

Numerical simulation of influence of nozzle structure on arc characteristics of GPCA-TIG welding

This work mainly articulated the effects of nozzle structure on arc characteristics in gas pool coupled activating TIG （GPCA-TIG） welding process by using Fluent Software. Different models were set up to adapt the different torch structure during computer progress. The specific configuration of the welding torch made the gas flow in outer gas passage constrained. The nozzle structure has great influence on outer gas distribution because of the changing of coupling region between the outer active gas and molten pool surface. When the coupling degree is reduced or the outer gas passage become smaller, the oxygen in outer gas penetrates into the arc plasma and spreads to the arc region more easily. Owing to its cooling effects, the morphology of arc is contracted, and the arc temperature is increased. When the inner wall and the outer wall of outer gas passage are not parallel, the wide top and narrow bottom nozzle shape can bring more oxygen into the arc plasma, the arc is contracted and the peak temperature of arc rises a little more comparing to the narrow top and wide bottom one.

Low porosity and fine coatings produced by a new type nozzle of high velocity arc spray gun

The new designed high-velocity arc spray gun with three different nozzles is developed to match the DZ400 arc spray system, which can produce the coatings with the structure of superfine and low porosity. This system can be used to spray three normal wires such as 4Cr13, FeCrAl and 7Cr13 （flux cored wires）. Using the scanning electron microscope （ SEM ） to analyze shape and particles size that sprayed by the nozzles with different parameters, as well as with the S-3500N SEM and the energy spectrum analytic （ESA） instrument to identify the content of the oxides, porosity and thickness of the coatings, we get the result that the porosity in the coatings of solid wire is less than 3%, of the flux-cored wires is less than 5%, and the distribution of the coatings sprayed by the nozzle with secondary supplementary airflow is typically shown in the form of highdensity lameUarsplat structure and the average lamellar thickness is around 5μm.

Analysis of the Agglomeration of Powder in a Coaxial Powder Feeding Nozzle Used for Laser Energy Deposition

To improve the agglomeration of powder in a coaxial powder feeding nozzle used in the frame of a laser energy deposition technique,the influence of several parameters must be carefully assessed.In the present study the problem is addressed by means of numerical simulations based on a DEM-CFD(Discrete Element Method and Discrete Element Method)coupled model.The influence of the powder flow concentration,powder flow focal length and the amount of powder at the nozzle outlet on the rate of convergence of the powder flow is considered.The role played by the nozzle outlet width,the angle between the inner and outer walls and the powder incident angle in determining the powder flow concentration is also considered.The results show that,with increasing of nozzle outlet width,the powder flow concentration per unit volume at the nozzle focal point undergoes a non-monotonic behaviour(it first increases and then decreases).When the nozzle outlet widthδis 1.00 mm,the powder flow concentration at the focal point is maximal and the powder flow convergence can be considered optimal.By increasing the angle between the inner and outer walls,the powder flow concentration related to the upper focus decreases,the focus diameter increases and the powder flow aggregation worsens.The powder flow concentration increases first and then decreases with increasing incident angle.When the incident angleθis 30°,the powder flow exhibits the best agglomeration properties.When the outlet width is smaller,the angle between the inner and outer walls is larger,and when the incident angle is set at 30°,the powder flow concentration of the coaxial nozzle can be effectively improved.

Producing ultra-high-speed nitrogen jets by arc heating in a low-pressure chamber

Pure nitrogen gas was heated with direct current arc, at input powers from several hundred Watt to over 5 kW, and then injected through a nozzle into a chamber at 1 or 10 Pa pressure, with the purpose of accelerating the gas to very high speed around 7 km/s. Various structures of the arc generator and gas expansion nozzle were examined. Results show that bypass exhausting of the boundary layer before it enters the nozzle divergent section can greatly increase flow speed of the jet, thus it might be possible to use nitrogen as a working gas in high speed gas dynamic test facilities.

A Review of Engine Fuel Injection Studies Using Synchrotron Radiation X-ray Imaging

Fuel spray characteristics directly determine the formation pattern and quality of the fuel/air mixture in an engine,and thus affect the combustion process.For this reason,the improvement and optimization of fuel injection systems is crucial to the development of engine technologies.The fuel jet breakup and atomization process is a complex liquid-gas two-phase turbulent flow system that has not yet been fully elucidated.Owing to the limitations of standard optical measurement techniques,the spray breakup mechanism and its interaction with the nozzle internal flow are still unclear.However,in recent years synchrotron radiation(SR)X-ray imaging technologies have been widely applied in engine fuel injection studies because of the higher energy and brilliance of third-generation SR light sources.This review provides a brief introduction to the development of SR technology and compares the critical parameters of the primary third-generation SR light sources available worldwide.The basic principles and applications of various X-ray imaging technologies with regard to nozzle internal structure measurements,visualization of in-nozzle flow characteristics and quantitative analyses of near-field spray transient dynamics are examined in detail.