Control system design for a pressure-tube-type supercritical water-cooled nuclear reactor via a higher order sliding mode method

Nuclear power plants exhibit non-linear and time-variable dynamics.Therefore,designing a control system that sets the reactor power and forces it to follow the desired load is complicated.A supercritical water reactor(SCWR)is a fourth-generation conceptual reactor.In an SCWR,the non-linear dynamics of the reactor require a controller capable of control-ling the nonlinearities.In this study,a pressure-tube-type SCWR was controlled during reactor power maneuvering with a higher order sliding mode,and the reactor outgoing steam temperature and pressure were controlled simultaneously.In an SCWR,the temperature,pressure,and power must be maintained at a setpoint(desired value)during power maneuvering.Reactor point kinetics equations with three groups of delayed neutrons were used in the simulation.Higher-order and classic sliding mode controllers were separately manufactured to control the plant and were compared with the PI controllers speci-fied in previous studies.The controlled parameters were reactor power,steam temperature,and pressure.Notably,for these parameters,the PI controller had certain instabilities in the presence of disturbances.The classic sliding mode controller had a higher accuracy and stability;however its main drawback was the chattering phenomenon.HOSMC was highly accurate and stable and had a small computational cost.In reality,it followed the desired values without oscillations and chattering.

A novel approach for radionuclide diffusion in the enclosed environment of a marine nuclear reactor during a severe accident

A severe accident in a marine nuclear reactor leads to radionuclide leakage,which causes hidden dangers to workers and has adverse effects of environmental pollution.It is necessary to propose a novel approach to radionuclide diffusion in a confined environment after a severe accident in a marine nuclear reactor.Therefore,this study proposes a new method for the severe accident analysis program MELCOR coupled with computational fluid dynamics scSTREAM to study radioactive diffusion in severe accidents.The radionuclide release fraction and temperature calculated by MELCOR were combined with the scSTREAM calculations to study the radionuclide diffusion behavior and the phenomenon of radionuclide diffusion in different space environments of the reactor under the conditions of varying wind velocities of the ventilation system and diffusion speed.The results show that the wind velocity of the ventilation system is very small or zero,and the turbulent diffusion of radionuclides is not obvious and diffuses slowly in the form of condensation sedimentation and gravity settlement.When the wind speed of the ventilation system increases,the flow of radionuclides meets the wall and forms eddy currents,affecting the time variation of radionuclides diffusing into chamber 2.The wind velocity of the ventilation system and the diffusion speed has opposite effects on the time variation trend of radionuclide diffusion into the four chambers.

Influence of the Impeller/Guide Vane Clearance Ratio on the Performances of a Nuclear Reactor Coolant Pump

An AP1000 nuclear reactor coolant pump is considered to assess the influence of the Impeller/Guide vane clearance on the performances of this type of pumps.Experiments and numerical simulations relying on an unidirectional fluid-solid coupling approach are used to investigate the problem(stress,strain and mode of the rotor).The results reveal the relationship existing between the hydraulic performance of the nuclear reactor coolant pump and the clearance ratio.The effect of clearance ratio on the maximum equivalent stress on the back surface of the impeller blade is greater than that on the working surface(the maximum equivalent stress on the back surface of impeller blade is about three times that on the working surface).The clearance ratio has a scarce effect on the first six natural frequencies of the rotor of the nuclear reactor coolant pump.The related vibrational modes have different waveforms.

Thermal–hydraulic analysis of space nuclear reactor TOPAZ-Ⅱ with modified RELAP5

With the advantages of high reliability, power density, and long life, nuclear power reactors have become a promising option for space power. In this study, the Reactor Excursion and Leak Analysis Program 5(RELAP5), with the implementation of sodium–potassium eutectic alloy(NaK-78) properties and heat transfer correlations, is adopted to analyze the thermal–hydraulic characteristics of the space nuclear reactor TOPAZ-Ⅱ.A RELAP5 model including thermionic fuel elements(TFEs), reactor core, radiator, coolant loop, and volume accumulator is established. The temperature reactivity feedback effects of the fuel, TFE emitter, TFE collector,moderator, and reactivity insertion effects of the control drums and safety drums are considered. To benchmark the integrated TOPAZ-Ⅱ system model, an electrical ground test of the fully integrated TOPAZ-Ⅱ system, the V-71 unit,is simulated and analyzed. The calculated coolant temperature and system pressure are in acceptable agreement with the experimental data for the maximum relative errors of 8 and 10%, respectively. The detailed thermal–hydraulic characteristics of TOPAZ-Ⅱ are then simulated and analyzed at the steady state. The calculation results agree well with the design values. The current work provides a solid foundation for space reactor design and transient analysis in the future.

Computational Tools for the Integrated Design of Advanced Nuclear Reactors

先进核反应堆可为全世界提供安全、清洁、可靠的电能。从概念设计前期,到详细设计工作、执照申请和电站运行等不同阶段,开发先进核反应堆对计算模型的依赖程度都非常高。一个综合性反应堆建模框架不仅可以实现无缝通信、连接、自动化和连续开发等功能,更可以极大地提高反应堆设计工作的能力和效率。在这种系统中,各种关键性能指标(如最优燃料管理、设计基础事故状态下包壳的峰值温度、平准化发电成本等)可以明确地与设计输入数据(如集成模块管道的厚度、容差等数据)联系在一起,保证极高的设计一致性。此系统结合高性能计算系统之后,能够同时执行数千个集成的案例对整个系统进行敏感性分析,从而高效、可靠地评估各种设计,确定最优方案。TerraPower公司开发了一款类似的工具,他们将其命名为"高级反应堆建模接口系统"(ARMI),并已将其应用于目前正在开发的TerraPower行波反应堆设计及其他创新性能源产品的设计工作中。ARMI系统使用之前已有的、具有强大谱系的各种工具,以及创新性设计所需的多种新的物理和数据管理模块。此系统将之前已有的和各种新的物理测量值(这些数据对任何优秀的设计而言都是非常重要的基础数据)进行了对比确认和验证。本文综述了集成反应堆堆芯工程设计工具的情况和TerraPower公司的生产实践情况。

Ultrasound Imaging in Nuclear Reactors Cooled by Liquid Metals

In nuclear reactors cooled by liquid metals, ultrasound is the only type of field that allows obtaining images of the reactor cores and diagnostics of the integrity of the fuel assemblies. The article discusses the features of the practical realization of ultrasonic imaging systems based on phased arrays and offers an alternative solution of imaging on the basis of the acoustic lenses of refractive and diffraction types. Using lenses eliminates many of the technical and technological problems associated with the development of multi-element phased arrays. It is shown that lens systems allow using traditional methods of transformation of acoustic fields into the visible images by 2D piezo matrix and a more promising way of acoustooptical transformation based on coherent optical interferometry.

A Survey of New Methods for Production of Some Radionuclides, at Laboratory Scale, through Secondary Reactions in Nuclear Reactors

The studies performed in the frame of a project destined for the search of new (t,n) and (p,n) reactions of interest in nuclear reactors are described. Experimental evidences of the observations of the reactions: 46Ti(t,n)48V, 48Ti(p,n)48V, 52Cr(t,n)54Mn, 56Fe(p,n)56Co, 72Ge(t,n)74As and 74Ge(p,n)74As, are presented. Additional data on some secondary reactions, already characterised for the production of 7Be, 56Co, 58Co, 65Zn and 88Y, were also obtained. The significance of these data is discussed.

Comparison of Small Modular Reactor and Large Nuclear Reactor Fuel Cost

Small modular reactors (SMRs) offer simple, standardized, and safe modular designs for new nuclear reactor construction. They are factory built, requiring smaller initial capital investment and facilitating shorter construction times. SMRs also promise competitive economy when compared with the current reactor fleet. Construction cost of a majority of the projects, which are mostly in their design stages, is not publicly available, but variable costs can be determined from fuel enrichment, average burn-up, and plant thermal efficiency, which are public parameters for many near-term SMR projects. The fuel cost of electricity generation for selected SMRs and large reactors is simulated, including calculation of optimal tails assay in the uranium enrichment process. The results are compared between one another and with current generation large reactor designs providing a rough comparison of the long-term economics of a new nuclear reactor project. SMRs are predicted to have higher fuel costs than large reactors. Particularly, integral pressurized water reactors (iPWRs) are shown to have from 15% to 70% higher fuel costs than large light water reactors using 2014 nuclear fuels market data. Fuel cost sensitivities to reactor design parameters are presented.

An old issue and a new challenge for nuclear reactor safety

Nuclear reactor safety(NRS)and the branch accident analysis(AA)constitute proven technologies:these are based on,among the other things,long lasting research and operational experience in the area of water cooled nuclear reactors(WCNR).Large break loss of coolant accident(LBLOCA)has been,so far,the orienting scenario within AA and a basis for the design of reactors.An incomplete vision for those technologies during the last few years is as follows:Progress in fundamentals was stagnant,namely in those countries where the WCNR were designed.Weaknesses became evident,noticeably in relation to nuclear fuel under high burn-up.Best estimate plus uncertainty(BEPU)techniques were perfected and available for application.Electronic and informatics systems were in extensive use and their impact in case of accident becomes more and more un-checked(however,quite irrelevant in case of LBLOCA).The time delay between technological discoveries and applications was becoming longer.The present paper deals with the LBLOCA that is inserted into the above context.Key conclusion is that regulations need suitable modification,rather than lowering the importance and the role of LBLOCA.Moreover,strengths of emergency core cooling system(ECCS)and containment need a tight link.

Design and Thermal Analysis of the Large Fire Door for AP1000 Nuclear Reactor

The large fire door is the key component to ensure the effectiveness of fire zone in AP1000 nuclear reactor.According to the fire design requirements and design criteria,the global structure of the large fire door is designed.Based on the designed structure,the thermal mathematical model of the large fire door is established.Based on the solid heat transfer theory,the multi-layer heat transfer theory and integrated heat transfer theory,the differential equations of heat conduction,initial conditions,and boundary conditions are determined.Thermal analysis for the fire door leaf and the closure is carried out by using the method of numerical simulation.Results show that:considering the thermal load,the whole structure of the large fire door can meet the fire resistance limit of 3 hours and the design is reasonable and feasible.This study provides theory basis for the design of the large fire door.

Mechanical and fatigue properties of SA508-Ⅳ steel used for nuclear reactor pressure vessels

The mechanical and fatigue properties of SA508-Ⅳ steel with martensite and granular bainite, respectively, were studied. The mechanical tests results showed that the ultimate tensile strength and impact toughness of the specimen with martensite were 830 MPa and 158 J, respectively, and those of the specimen with granular bainite were 811 MPa and 115 J, respectively. The former had higher tensile strength and impact toughness than the latter. The impact tests results showed that the former belonged to typical dimple fracture, while the latter belonged to brittle fracture. The fatigue tests results showed that the fatigue life of the specimen with martensite was 2717 cycles, and that of the specimen with granular bainite was 1545 cycles under the strain amplitude of ± 0.45%. The specimen with martensite had fewer crack initiation points, narrower fatigue striations separation, and larger volume fraction of high-angle grain boundaries than the latter. The fewer crack initiation points meant fewer fatigue cracks, the narrower fatigue striations separation meant slower crack propagation rate, and the larger volume fraction of high-angle grain boundaries could more effectively hinder fatigue crack propagation. Based on these facts, the fatigue life of the specimen with martensite was higher than that of the specimen with granular bainite.

Artificial Intelligence Driven Nuclear Power Reactors(A Technical Memorandum)

The 21st Century era and new modern technologies surrounding us day-in and day-out have opened a new door to“Pandora Box”,that we do know it as AI(artificial intelligence)and its two essential integrated components namely ML(machine learning)and DL(deep learning).However,the strive and progress in AI,ML,and DL pretty much has taken over any industry that we can think of,when it comes to dealing with cloud of structured data in form of BD(big data).A NPP(nuclear power plant)has multiple complicated dynamic system-of-components that have nonlinear behaviors.For controlling the plant operation under both normal and abnormal conditions,the different systems in NPPs(e.g.,the reactor core components,primary and secondary coolant systems)are usually monitored continuously,which leads to very huge amounts of data.Of course Nuclear Power Industry in form of GEN-IV(Generation IV)has not been left behind in this 21st century era by moving out of GEN-III(Generation III)to more modulars form of GEN-IV,known as SMRs(small modular reactors),with a lot of electronic gadgets and electronics that read data and information from it to support safety of these reactor,while in operation with a built in PRA(probabilistic risk assessment),which requires augmentation of AI in them to enhance performance of human operators that are engaged with day-to-day smooth operation of these reactors to make them safe and safer as well as resilience against any natural or man-made disasters by obtaining information through ML from DL that is collecting massive stream of data coming via omni-direction.Integration of AI with HI(human intelligence)is not separable,when it comes to operation of these smart SMRs with state of the art and smart control rooms with human in them as actors.This TM(technical memorandum)is describing the necessity of AI playing with nuclear reactor power plant of GEN-IV being in operation within near term sooner than later,when specially we are facing today’s cyber-attacks with their smart malware agents at work.

A Semilinear Parabolic System Arising in the Nuclear Reactors

This note studies the following initial boundary value problem, which arises in the nuclear

GLOBAL SOLUTION,ASYMPTOTIC BEHAVIOR AND BLOW-UP PROBLEMS FOR A MODEL OF NUCLEAR REACTORS

The existence of global solution and the blow-up problem for a model of nuclear reactorsare discussed by using the upper-lower solution and energy estimate methods; asymptoticbehavior of global solution is also discussed with the aid of L_p estimate and semigroupmethod for this model. Nice results, which explain the phenomenon of nuclear reactorsbetter, are obtained.

Development and Application of Maintenance Template in Pressurized Water Reactor Nuclear Power Plant

Good practices of maintenance optimization in nuclear power field need to be effectively consolidated and inherited,and maintenance optimization can provide technology support to create a long-term reliable and economic operation for nuclear power plants( NPPs) especially for a large number of nuclear powers under construction. Based on the development and application of maintenance template in developed countries,and combining with reliability-centered maintenance( RCM) analysis results and maintenance experience data over the past ten years in domestic NPPs, the development process of maintenance template was presented for Chinese pressurized water reactor( PWR) NPP,and the application of maintenance template to maintenance program development and maintenance optimization combined with cases were demonstrated. A shortcut was provided for improving the efficiency of maintenance optimization in domestic PWR NPP,and help to realize a safe,reliable,and economic operation for domestic NPPs.

Investigation on two－phase flow instability in steam generator of integrated nuclear reactor

Ｉｎｖｅｓｔｉｇａｔｉｏｎｏｎｔｗｏ－ｐｈａｓｅｆｌｏｗｉｎｓｔａｂｉｌｉｔｙｉｎｓｔｅａｍｇｅｎｅｒａｔｏｒｏｆｉｎｔｅｇｒａｔｅｄｎｕｃｌｅａｒｒｅａｃｔｏｒＪｉｎｇＪｉａｎ－Ｇａｎｇ（荆建刚）ａｎｄＣｈｅｎＴｉｎｇ－Ｋｕａｎ（陈听宽）（Ｘｉ＇ａ...

Turbulent vortex trains in narrow square arrayed rod bundles of a dual-cooled nuclear reactor

The dual-cooled nuclear reactor is currently considered for improving the designs of current/future nuclear reactors. Investigation of the thermal-hydraulic characteristics of the nuclear reactor via experiments is essential for commercializing the dual-cooled nuclear reactor. In this paper, the turbulent flow in square arrayed six-rod bundles in the form of magnified copies of the dual-cooled and current OPR-1000 nuclear reactor is experimentally investigated by means of hot-wire anemometry and smoke-wire generation methods. Vortex trains which do not exist in an ordinary reactor subchannel are presented in the subchannel of the dual-cooled reactor. The vortices are induced by a span-wise velocity gradient. This flow pulsation phenomenon increases the inter-channel mixing of the subchannel. To understand the periodic feature of the pulsation, axial/cross velocities are measured and the periodic characteristic frequencies are obtained by a Fast Fourier Transform (FFT) analysis. The peak frequency that represents the quasi-periodic pulsation of the flow is increased with an increase in the axial velocity while the wavelength of the pulsation remains constant within a tested range of the Reynolds number (9000 51000). The vortex trains are highly synchronized with each other, as confirmed by means of visualization.

Spatial Reactor Dynamics and Thermo Hydraulic Behavior Simulation of a Large AGR Nuclear Power Reactor in Response to a Reactivity Step Change Disturbance

In this article, two-dimensional partial differential equations with time representation of nuclear power reactor kinetics are considered for spatial reactor dynamics and thermo hydraulic behavior analysis of a large thermal advanced gas cooled reactor (AGR) type used for nuclear power generation. The equations include the neutron flux equation and delayed neutron precursor concentration, together with taking into account the equations to represent the thermo hydraulic behavior of the fuel, coolant and moderator temperatures. These equations are solved numerically using the finite difference method. For time propagation, an implicit method is applied. The desired initial condition for the reactor to stay at stable critical condition is established by finding the correct value of reactivity. The reactivity disturbance effect in the reactor is studied for different cases and presented for high reactivity values. The model was developed for the analysis of a large AGR with 2000 MWe for future power generation. The results show that the model not only behaves stably but also predicts the results physically for all the various parameters.