To effectively minimize the electromagnetic field response in the total field solution, we propose a numerical modeling method for the two-dimensional （2D） time- domain transient electromagnetic secondary field of t...To effectively minimize the electromagnetic field response in the total field solution, we propose a numerical modeling method for the two-dimensional （2D） time- domain transient electromagnetic secondary field of the line source based on the DuFort- Frankel finite-difference method. In the proposed method, we included the treatment of the earth-air boundary conductivity, calculated the normalized partial derivative of the induced electromotive force （Emf）, and determined the forward time step. By extending upward the earth-air interface to the air grid nodes and the zero-value boundary conditions, not only we have a method that is more efficient but also simpler than the total field solution. We computed and analyzed the homogeneous half-space model and the fiat layered model with high precision--the maximum relative error is less than 0.01% between our method and the analytical method--and the solution speed is roughly three times faster than the total-field solution. Lastly, we used the model of a thin body embedded in a homogeneous half-space at different delay times to depict the downward and upward spreading characteristics of the induced eddy current, and the physical interaction processes between the electromagnetic field and the underground low-resistivity body.展开更多
The model established in this paper for calculating the unsteady temperature field, in which physical parameters varies with temperatures, is simplified as compared with the classical one by defining the heat conducti...The model established in this paper for calculating the unsteady temperature field, in which physical parameters varies with temperatures, is simplified as compared with the classical one by defining the heat conductivity as function of temperature and dealing with the latent heat of phase transformation and boundary conditions. The results show that the probability of absolute error less 2℃ between the calculated and measured values in temperature field calculation reaches above 80%.展开更多
The use of a shaped liner driven by electromagnetic force is a new means of forming jets. To study the mechanism of jet formation driven by electromagnetic force, we considered the current skin effect and the characte...The use of a shaped liner driven by electromagnetic force is a new means of forming jets. To study the mechanism of jet formation driven by electromagnetic force, we considered the current skin effect and the characteristics of electromagnetic loading and established a coupling model of "ElectriceMagnetic eForce" and the theoretical model of jet formation under electromagnetic force. The jet formation and penetration of conical and trumpet liners have been calculated. Then, a numerical simulation of liner collapse under electromagnetic force, jet generation, and the stretching motion were performed using an ANSYS multiphysics processor. The calculated jet velocity, jet shape, and depth of penetration were consistent with the experimental results, with a relative error of less than 10%. In addition, we calculated the jet formation of different curvature trumpet liners driven by the same loading condition and obtained the influence rule of the curvature of the liner on jet formation. Results show that the theoretical model and the ANSYS multiphysics numerical method can effectively calculate the jet formation of liners driven by electromagnetic force, and in a certain range, the greater the curvature of the liner is, the greater the jet velocity is.展开更多
A new treatment for interface of metal and dielectric in finite-difference time domain (FDTD) method was presented, further how and why this treatment should be as it is was explained. The FDTD method was developed to...A new treatment for interface of metal and dielectric in finite-difference time domain (FDTD) method was presented, further how and why this treatment should be as it is was explained. The FDTD method was developed to compute the low-frequency electromagnetic fields in the metal instead of the traditional high-frequency ones as it was originally proposed. The computational results agreed well with the experimental ones.展开更多
The aerodynamic noise of high-speed trains passing through a tunnel has gradually become an important issue.Numerical approaches for predicting the aerodynamic noise sources of high-speed trains running in tunnels are...The aerodynamic noise of high-speed trains passing through a tunnel has gradually become an important issue.Numerical approaches for predicting the aerodynamic noise sources of high-speed trains running in tunnels are the key to alleviating aerodynamic noise issues.In this paper,two typical numerical methods are used to calculate the aerodynamic noise of high-speed trains.These are the static method combined with non-reflective boundary conditions and the dynamic mesh method combined with adaptive mesh.The fluctuating pressure,flow field and aerodynamic noise source are numerically simulated using the abovemethods.The results showthat the fluctuating pressure,flow field structure and noise source characteristics obtained using different methods,are basically consistent.Compared to the dynamic mesh method,the pressure,vortex size and noise source radiation intensity,obtained by the static method,are larger.The differences are in the tail car and its wake.The two calculation methods show that the spectral characteristics of the surface noise source are consistent.The maximum difference in the sound pressure level is 1.9 dBA.The static method is more efficient and more suitable for engineering applications.展开更多
随着电力电缆在输配电线路中的广泛应用,准确确定电力电缆及其周围环境温度场的分布和电缆的载流量对于提高电力电缆的使用率、动态调整负荷具有重要的意义。为此,以地下排管敷设的交联聚乙烯电力电缆为研究对象,其实际模型为1个容量为2...随着电力电缆在输配电线路中的广泛应用,准确确定电力电缆及其周围环境温度场的分布和电缆的载流量对于提高电力电缆的使用率、动态调整负荷具有重要的意义。为此,以地下排管敷设的交联聚乙烯电力电缆为研究对象,其实际模型为1个容量为250MVA、额定电压为230kV的变电站的高压进线。根据传热学和有限元法(finite element method,FEM)基本原理,建立了1种基于有限元法的水泥排管敷设电缆温度场计算模型,并对电缆及其周围环境的求解区域进行复合有限三角形单元剖分,即对电缆区域进行较密集的网格划分,而对电缆周围的土壤区域则进行较为稀疏的网格划分,以提高程序的运算精度和运行速度。结果表明:用MATLAB软件仿真,从而得到电缆及其周围环境的温度场分布,迭代计算了排管敷设交联聚乙烯电缆的载流量。证明使用有限元的方法分析地下电缆温度场,为电力工程中电缆载流量确定提供了一个比较可靠的计算方法。展开更多
基金supported by the National High Technology Research and Development Program (863 Program)(2009AA06Z108)
文摘To effectively minimize the electromagnetic field response in the total field solution, we propose a numerical modeling method for the two-dimensional （2D） time- domain transient electromagnetic secondary field of the line source based on the DuFort- Frankel finite-difference method. In the proposed method, we included the treatment of the earth-air boundary conductivity, calculated the normalized partial derivative of the induced electromotive force （Emf）, and determined the forward time step. By extending upward the earth-air interface to the air grid nodes and the zero-value boundary conditions, not only we have a method that is more efficient but also simpler than the total field solution. We computed and analyzed the homogeneous half-space model and the fiat layered model with high precision--the maximum relative error is less than 0.01% between our method and the analytical method--and the solution speed is roughly three times faster than the total-field solution. Lastly, we used the model of a thin body embedded in a homogeneous half-space at different delay times to depict the downward and upward spreading characteristics of the induced eddy current, and the physical interaction processes between the electromagnetic field and the underground low-resistivity body.
文摘The model established in this paper for calculating the unsteady temperature field, in which physical parameters varies with temperatures, is simplified as compared with the classical one by defining the heat conductivity as function of temperature and dealing with the latent heat of phase transformation and boundary conditions. The results show that the probability of absolute error less 2℃ between the calculated and measured values in temperature field calculation reaches above 80%.
基金supported by the Natural Science Funds for Distinguished Young Scholar (Grant No. 11602110)Jiangsu Province Graduate Research and Practice Innovation Program (No.KY CX180471)。
文摘The use of a shaped liner driven by electromagnetic force is a new means of forming jets. To study the mechanism of jet formation driven by electromagnetic force, we considered the current skin effect and the characteristics of electromagnetic loading and established a coupling model of "ElectriceMagnetic eForce" and the theoretical model of jet formation under electromagnetic force. The jet formation and penetration of conical and trumpet liners have been calculated. Then, a numerical simulation of liner collapse under electromagnetic force, jet generation, and the stretching motion were performed using an ANSYS multiphysics processor. The calculated jet velocity, jet shape, and depth of penetration were consistent with the experimental results, with a relative error of less than 10%. In addition, we calculated the jet formation of different curvature trumpet liners driven by the same loading condition and obtained the influence rule of the curvature of the liner on jet formation. Results show that the theoretical model and the ANSYS multiphysics numerical method can effectively calculate the jet formation of liners driven by electromagnetic force, and in a certain range, the greater the curvature of the liner is, the greater the jet velocity is.
基金the National Natural Science Foundation (GrantNO.5973J080) and by the "973" Key FOundation (Grant No. G1998061510).
文摘A new treatment for interface of metal and dielectric in finite-difference time domain (FDTD) method was presented, further how and why this treatment should be as it is was explained. The FDTD method was developed to compute the low-frequency electromagnetic fields in the metal instead of the traditional high-frequency ones as it was originally proposed. The computational results agreed well with the experimental ones.
基金This work is supported by the National Key Research and Development Program of China(2020YFA0710902)Sichuan Science and Technology Program(2021YFG0214,2019YJ0227)+1 种基金Fundamental Research Funds for the Central Universities(2682021ZTPY124)State Key Laboratory of Traction Power(2019TPL_T02).
文摘The aerodynamic noise of high-speed trains passing through a tunnel has gradually become an important issue.Numerical approaches for predicting the aerodynamic noise sources of high-speed trains running in tunnels are the key to alleviating aerodynamic noise issues.In this paper,two typical numerical methods are used to calculate the aerodynamic noise of high-speed trains.These are the static method combined with non-reflective boundary conditions and the dynamic mesh method combined with adaptive mesh.The fluctuating pressure,flow field and aerodynamic noise source are numerically simulated using the abovemethods.The results showthat the fluctuating pressure,flow field structure and noise source characteristics obtained using different methods,are basically consistent.Compared to the dynamic mesh method,the pressure,vortex size and noise source radiation intensity,obtained by the static method,are larger.The differences are in the tail car and its wake.The two calculation methods show that the spectral characteristics of the surface noise source are consistent.The maximum difference in the sound pressure level is 1.9 dBA.The static method is more efficient and more suitable for engineering applications.
文摘随着电力电缆在输配电线路中的广泛应用,准确确定电力电缆及其周围环境温度场的分布和电缆的载流量对于提高电力电缆的使用率、动态调整负荷具有重要的意义。为此,以地下排管敷设的交联聚乙烯电力电缆为研究对象,其实际模型为1个容量为250MVA、额定电压为230kV的变电站的高压进线。根据传热学和有限元法(finite element method,FEM)基本原理,建立了1种基于有限元法的水泥排管敷设电缆温度场计算模型,并对电缆及其周围环境的求解区域进行复合有限三角形单元剖分,即对电缆区域进行较密集的网格划分,而对电缆周围的土壤区域则进行较为稀疏的网格划分,以提高程序的运算精度和运行速度。结果表明:用MATLAB软件仿真,从而得到电缆及其周围环境的温度场分布,迭代计算了排管敷设交联聚乙烯电缆的载流量。证明使用有限元的方法分析地下电缆温度场,为电力工程中电缆载流量确定提供了一个比较可靠的计算方法。
