Adaptive explicit Magnus numerical method for nonlinear dynamical systems

Based on the new explicit Magnus expansion developed for nonlinear equations defined on a matrix Lie group, an efficient numerical method is proposed for nonlinear dynamical systems. To improve computational efficiency, the integration step size can be adaptively controlled. Validity and effectiveness of the method are shown by application to several nonlinear dynamical systems including the Duffing system, the van der Pol system with strong stiffness, and the nonlinear Hamiltonian pendulum system.

Response Sensitivity Analysis of the Dynamic Milling Process Based on the Numerical Integration Method

As one of the bases of gradient-based optimization algorithms, sensitivity analysis is usually required to calculate the derivatives of the system response with respect to the machining parameters. The most widely used approaches for sensitivity analysis are based on time-consuming numerical methods, such as finite difference methods. This paper presents a semi-analytical method for calculation of the sensitivity of the stability boundary in milling. After transforming the delay-differential equation with time-periodic coefficients governing the dynamic milling process into the integral form, the Floquet transition matrix is constructed by using the numerical integration method. Then, the analytical expressions of derivatives of the Floquet transition matrix with respect to the machining parameters are obtained. Thereafter, the classical analytical expression of the sensitivity of matrix eigenvalues is employed to calculate the sensitivity of the stability lobe diagram. The two-degree-of-freedom milling example illustrates the accuracy and efficiency of the proposed method. Compared with the existing methods, the unique merit of the proposed method is that it can be used for analytically computing the sensitivity of the stability boundary in milling, without employing any finite difference methods. Therefore, the high accuracy and high efficiency are both achieved. The proposed method can serve as an effective tool for machining parameter optimization and uncertainty analysis in high-speed milling.

A Numerical Model for Edge Waves on A Compound Slope

An edge wave is a kind of surface gravity wave basically travelling along a shoaling beach. Based on the periodic assumption in the longshore direction, a second order ordinary differential equation is obtained for numerical simulation of the cross-shore surface elevation. Given parameters at the shoreline, a cross-shore elevation profile is obtained through integration with fourth-order Runge Kutta technique. For a compound slope, a longshore wavenumber is obtained by following a geometrical approach and solving a transcendental equation with an asymptotic method. Numerical results on uniform and compound sloping beaches with different wave periods, slope angles, modes and turning point positions are presented. Some special scenarios, which cannot be predicted by analytical models are also discussed.

Efficiency analysis of numerical integrations for finite element substructure in real-time hybrid simulation

Finite element（FE） is a powerful tool and has been applied by investigators to real-time hybrid simulations（RTHSs）. This study focuses on the computational efficiency, including the computational time and accuracy, of numerical integrations in solving FE numerical substructure in RTHSs. First, sparse matrix storage schemes are adopted to decrease the computational time of FE numerical substructure. In this way, the task execution time（TET） decreases such that the scale of the numerical substructure model increases. Subsequently, several commonly used explicit numerical integration algorithms, including the central difference method（CDM）, the Newmark explicit method, the Chang method and the Gui-λ method, are comprehensively compared to evaluate their computational time in solving FE numerical substructure. CDM is better than the other explicit integration algorithms when the damping matrix is diagonal, while the Gui-λ（λ = 4） method is advantageous when the damping matrix is non-diagonal. Finally, the effect of time delay on the computational accuracy of RTHSs is investigated by simulating structure-foundation systems. Simulation results show that the influences of time delay on the displacement response become obvious with the mass ratio increasing, and delay compensation methods may reduce the relative error of the displacement peak value to less than 5% even under the large time-step and large time delay.

MATRIX ALGEBRA ALGORITHM OF STRUCTURE RANDOM RESPONSE NUMERICAL CHARACTERISTICS

A new algorithm of structure random response numerical characteristics, namedas matrix algebra algorithm of structure analysis is presented. Using the algorithm, structurerandom response numerical characteristics can easily be got by directly solving linear matrixequations rather than structure motion differential equations. Moreover, in order to solve thecorresponding linear matrix equations, the numerical integration fast algorithm is presented. Thenaccording to the results, dynamic design and life-span estimation can be done. Besides, the newalgorithm can solve non-proportion damp structure response.

A varying time-step explicit numerical inte-gration algorithm for solving motion equa-tion

If a traditional explicit numerical integration algorithm is used to solve motion equation in the finite element simulation of wave motion, the time-step used by numerical integration is the smallest time-step restricted by the stability criterion in computational region. However, the excessively small time-step is usually unnecessary for a large portion of computational region. In this paper, a varying time-step explicit numerical integration algorithm is introduced, and its basic idea is to use different time-step restricted by the stability criterion in different computational region. Finally, the feasibility of the algorithm and its effect on calculating precision are verified by numerical test.

LONG-TERM RIGOROUS NUMERICAL INTEGRATION OF NAVIER-STOKES EQUATION BY NEWTON-GMRES ITERATION

The recent result of an orbit continuation algorithm has provided a rigorous method for long-term numerical integration of an orbit on the unstable manifold of a periodic solution.This algorithm is matrix-free and employs a combination of the Newton-Raphson method and the Krylov subspace method.Moreover,the algorithm adopts a multiple shooting method to address the problem of orbital instability due to long-term numerical integration.The algorithm is described through computing the extension of unstable manifold of a recomputed Nagata′s lowerbranch steady solution of plane Couette flow,which is an example of an exact coherent state that has recently been studied in subcritical transition to turbulence.

Numerical Integration Method in Analysis of Wire Antennas

The numerical evaluation of an integral is a frequently encountered problem in antenna analysis. A special Gauss Christoffel quadrature formula for nonclassical weight function is constructed for solving the pseudo singular integration problem arising from the analysis of thin wire antennas. High integration accuracy is obtained at comparable low computation cost by the quadrature formula constructed. This integration method can be also used in other electromagnetic integral equation problems.

The Numerical Integration of Discrete Functions on a Triangular Element

With the application of Hammer integral formulas of a continuous function on a triangular element, the numerical integral formulas of some discrete functions on the element are derived by means of decomposition and recombination of base functions. Hammer integral formulas are the special examples of those of the paper.

Integrated numerical model of nitrogen transportation,absorption and transformation by two-dimension in soil-crop system

A series of simulation experiments of nitrogen transportation, absorption and transformation were conducted, and the different cropping patterns of winter wheat and wastewater irrigation plans were taken into consideration. Based on the experiments, an integrated model of crop growth, roots distribution, water and nitrogen absorption by roots, water and nitrogen movement and transformation in soil-crop system by two-dimension was developed. Parameters and boundary conditions were identified and an effective computing method for optimizing watering and wastewater irrigating plans was provided.

PARALLEL INFORMATION-BASED COMPLEXITY OF NUMERICAL INTEGRATION ON SOBOLEV CLASS W_q^s(Ω)

This paper deals with the parallel information-based complexity of numerical integration on Sobolev class. We obtain tight bounds on the complexity, considered as a function of two variables simultaneously:the number of processors, the rquired precision. This result seems to be new even in serial case.

A New Modified EWMA Control Chart for Monitoring Processes Involving Autocorrelated Data

Control charts are one of the tools in statistical process control widely used for monitoring,measuring,controlling,improving the quality,and detecting problems in processes in variousfields.The average run length(ARL)can be used to determine the efficacy of a control chart.In this study,we develop a new modified exponentially weighted moving average(EWMA)control chart and derive explicit formulas for both one and the two-sided ARLs for a p-order autoregressive(AR(p))process with exponential white noise on the new modified EWMA control chart.The accuracy of the explicit formulas was compared to that of the well-known numerical integral equation(NIE)method.Although both methods were highly consistent with an absolute percentage difference of less than 0.00001%,the ARL using the explicit formulas method could be computed much more quickly.Moreover,the performance of the explicit formulas for the ARL on the new modified EWMA control chart was better than on the modified and standard EWMA control charts based on the relative mean index(RMI).In addition,to illustrate the applicability of using the proposed explicit formulas for the ARL on the new modified EWMA control chart in practice,the explicit formulas for the ARL were also applied to a process with real data from the energy and agriculturalfields.

Multiple Regression and Big Data Analysis for Predictive Emission Monitoring Systems

Predictive Emission Monitoring Systems (PEMS) offer a cost-effective and environmentally friendly alternative to Continuous Emission Monitoring Systems (CEMS) for monitoring pollution from industrial sources. Multiple regression is one of the fundamental statistical techniques to describe the relationship between dependent and independent variables. This model can be effectively used to develop a PEMS, to estimate the amount of pollution emitted by industrial sources, where the fuel composition and other process-related parameters are available. It often makes them sufficient to predict the emission discharge with acceptable accuracy. In cases where PEMS are accepted as an alternative method to CEMS, which use gas analyzers, they can provide cost savings and substantial benefits for ongoing system support and maintenance. The described mathematical concept is based on the matrix algebra representation in multiple regression involving multiple precision arithmetic techniques. Challenging numerical examples for statistical big data analysis, are investigated. Numerical examples illustrate computational accuracy and efficiency of statistical analysis due to increasing the precision level. The programming language C++ is used for mathematical model implementation. The data for research and development, including the dependent fuel and independent NOx emissions data, were obtained from CEMS software installed on a petrochemical plant.

Integrated numerical simulation of hydraulic fracturing and production in shale gas well considering gas-water two-phase flow

Based on the displacement discontinuity method and the discrete fracture unified pipe network model,a sequential iterative numerical method was used to build a fracturing-production integrated numerical model of shale gas well considering the two-phase flow of gas and water.The model accounts for the influence of natural fractures and matrix properties on the fracturing process and directly applies post-fracturing formation pressure and water saturation distribution to subsequent well shut-in and production simulation,allowing for a more accurate fracturing-production integrated simulation.The results show that the reservoir physical properties have great impacts on fracture propagation,and the reasonable prediction of formation pressure and reservoir fluid distribution after the fracturing is critical to accurately predict the gas and fluid production of the shale gas wells.Compared with the conventional method,the proposed model can more accurately simulate the water and gas production by considering the impact of fracturing on both matrix pressure and water saturation.The established model is applied to the integrated fracturing-production simulation of practical horizontal shale gas wells.The simulation results are in good agreement with the practical production data,thus verifying the accuracy of the model.

New Numerical Integration Formulations for Ordinary Differential Equations

An entirely new framework is established for developing various single- and multi-step formulations for the numerical integration of ordinary differential equations. Besides polynomials, unconventional base-functions with trigonometric and exponential terms satisfying different conditions are employed to generate a number of formulations. Performances of the new schemes are tested against well-known numerical integrators for selected test cases with quite satisfactory results. Convergence and stability issues of the new formulations are not addressed as the treatment of these aspects requires a separate work. The general approach introduced herein opens a wide vista for producing virtually unlimited number of formulations.

AN IMPLICIT SERIES PRECISE INTEGRATION ALGORITHM FOR STRUCTURAL NONLINEAR DYNAMIC EQUATIONS

Nonlinear dynamic equations can be solved accurately using a precise integration method. Some algorithms exist, but the inversion of a matrix must be calculated for these al- gorithms. If the inversion of the matrix doesn’t exist or isn’t stable, the precision and stability of the algorithms will be afected. An explicit series solution of the state equation has been pre- sented. The solution avoids calculating the inversion of a matrix and its precision can be easily controlled. In this paper, an implicit series solution of nonlinear dynamic equations is presented. The algorithm is more precise and stable than the explicit series solution and isn’t sensitive to the time-step. Finally, a numerical example is presented to demonstrate the efectiveness of the algorithm.

Self-adapting radiation control method for RFS in tracking

The aim of this paper is to achieve the radio frequency stealth(RFS) during the course of tracking by controlling the radiation energy and the interval of a radar. Firstly, we build the model of probability of interception with the once radiation during the course of tracking. Secondly, we establish the model of the cumulative probability of interception to describe the effect of RFS throughout the tracking process and obtain two solutions that are minimizing the probability of interception and the radiation times to reduce the cumulative probability of interception. Thirdly, we propose a self-adapting radiation energy control method(SARE)to minimize the probability of interception. Fourthly, we propose a self-adapting radiation interval control method(SARI) to minimize radiation times. Fifthly, combining SARE with SARI, we propose a SARE-SARI control method(SAEI) during the course of tracking.Finally, we compare SAEI with two others by simulation, and the results show the effect of RFS of SAEI is better than the other two,but we have to make a trade-off between the ability of RFS and the effect of tracking.

A New Method of Embedded Fourth Order with Four Stages to Study Raster CNN Simulation

A new Runge-Kutta （PK） fourth order with four stages embedded method with error control is presentea m this paper for raster simulation in cellular neural network （CNN） environment. Through versatile algorithm, single layer/raster CNN array is implemented by incorporating the proposed technique. Simulation results have been obtained, and comparison has also been carried out to show the efficiency of the proposed numerical integration algorithm. The analytic expressions for local truncation error and global truncation error are derived. It is seen that the RK-embedded root mean square outperforms the RK-embedded Heronian mean and RK-embedded harmonic mean.

Precise integration method without inverse matrix calculation for structural dynamic equations

The precise integration method proposed for linear time-invariant homogeneous dynamic systems can provide accurate numerical results that approach an exact solution at integration points. However, difficulties arise when the algorithm is used for non-homogeneous dynamic systems due to the inverse matrix calculation required. In this paper, the structural dynamic equalibrium equations are converted into a special form, the inverse matrix calculation is replaced by the Crout decomposition method to solve the dynamic equilibrium equations, and the precise integration method without the inverse matrix calculation is obtained. The new algorithm enhances the present precise integration method by improving both the computational accuracy and efficiency. Two numerical examples are given to demonstrate the validity and efficiency of the proposed algorithm.

Decision making with fuzzy probability assessments and fuzzy payoff

A novel method for decision making with fuzzy probability assessments and fuzzy payoff is presented. The consistency of the fuzzy probability assessment is considered. A fuzzy aggregate algorithm is used to indicate the fuzzy expected payoff of alternatives. The level sets of each fuzzy expected payoff are then obtained by solving linear programming models. Based on a defuzzification function associated with the level sets of fuzzy number and a numerical integration formula (Newton-Cotes formula), an effective approach to rank the fuzzy expected payoff of alternatives is also developed to determine the best alternative. Finally, a numerical example is provided to illustrate the proposed method.