In this study, the physicochemical properties, fatty acid profiles, and tocopherol compositions of Pinus koraiensis L.nut oils were evaluated, and the impact of different extraction technologies on the overall quality...In this study, the physicochemical properties, fatty acid profiles, and tocopherol compositions of Pinus koraiensis L.nut oils were evaluated, and the impact of different extraction technologies on the overall quality of pine nut oil was assessed. All the pine nut oils had pleasant and characteristic odor and flavor of the pine nuts and the flavor of the oil from hot-pressing was strongest. The oils obtained by hexane extraction and sub-critical extraction had less deterioration, indicating hexane extraction and sub-critical extraction preserve the oil quality well. Gas chromatography showed that the predominant fatty acid was linoleic acid(45.36%–45.91%), followed by oleic acid(26.91%–27.10%), and pinolenic acid(13.33%–13.63%), respectively. The oils from hexane extraction of cold-pressed cake and sub-critical extraction were richer in tocopherols and tocotrienols, namely, 37.52 and 36.18 mg/100 g, respectively, with α-tocopherol most abundant. The pine nut oils from hexane extraction of cold-pressed cake,hexane extraction, cold pressing, and sub-critical extraction had better oxidation stability with the oxidation induction times of 6.91, 5.27, 4.96 and 4.93 h, respectively. Based on its features, P. koraiensis nut oil may have the multiple application in edible oil, cosmetic, and pharmaceutical industry. P. koraiensis can be one of the good woody candidates for closing the gap between the demand and production of vegetable oils.展开更多
The purpose of this study is to compare the results of chemical analysis of two types of activated from the pyrolysis of bull horn and that of cow. Six samples were used to measure pH, carbon, calcium and to determine...The purpose of this study is to compare the results of chemical analysis of two types of activated from the pyrolysis of bull horn and that of cow. Six samples were used to measure pH, carbon, calcium and to determine adsorbent power. The pH was measured at a temperature of 20˚C using an “ANION 7010 ionomer” pH meter, the carbon (C) content was analyzed using a “EURO EA 3000” analyzer. and the electronic balance: “Sartorius CP-2P”, calcium (Ca) was analyzed using a DFS-8 spectrograph. For the adsorbency test, the 0.15% methylene blue R solution was used. At the end of this study, we found that the activated carbon from the bull horn demonstrated a carbon content that is higher than that of the cow horn (20.79% against 15.63%), activated carbon of cow horn is richer in calcium than that of bull horn (16.27% against 3.69%) and then the pH. The cow horn is higher than that of the bull horn (7.43 versus 6.5). For the adsorbent power, the sample (75% bull horn and 25% cow horn) was recorded with the greatest adsorbent power. Thus, from this study, it can be recommended as an activated carbon antidote to be used for poisonings treatment.展开更多
The international issue to be addressed towards realizing a low-carbon society is to reduce the amount of carbon-based underground reserves such as coal, petroleum, and coke, and strongly encouraged to use carbon neut...The international issue to be addressed towards realizing a low-carbon society is to reduce the amount of carbon-based underground reserves such as coal, petroleum, and coke, and strongly encouraged to use carbon neutral biomass-derived resources. Woodceramics is a hybrid porous carbon material composed of wood-based biomass and phenolic resin, characterized by high far-infrared emissivity and large specific surface area. Woodceramics has been studied as heating elements and humidity and gas sensors, etc. If this is applied to the inner walls of aging and grain drying furnaces for vegetables and fruits, both ripening and drying are greatly promoted and fossil fuels used in boilers can be significantly reduced. In fact, it can produce black garlic with far infrared rays using a woodceramics brick efficiently. Furthermore, as a substitute for phenolic resin, if plant-based liquefied materials from cashew nut shell oil can be prepared and can be used for manufacturing woodceramics, then all carbon neutral circulating woodceramics made from wood-based biomass is possible to manufacture. On the other hand, woodplastics is a composite material that can be made of wooden materials and plastics, and able to expect the effective use of wood-based biomass and waste plastics.展开更多
基金Supported by Henan Provincial Scientific and Technological Research Project(No.15210221027)
文摘In this study, the physicochemical properties, fatty acid profiles, and tocopherol compositions of Pinus koraiensis L.nut oils were evaluated, and the impact of different extraction technologies on the overall quality of pine nut oil was assessed. All the pine nut oils had pleasant and characteristic odor and flavor of the pine nuts and the flavor of the oil from hot-pressing was strongest. The oils obtained by hexane extraction and sub-critical extraction had less deterioration, indicating hexane extraction and sub-critical extraction preserve the oil quality well. Gas chromatography showed that the predominant fatty acid was linoleic acid(45.36%–45.91%), followed by oleic acid(26.91%–27.10%), and pinolenic acid(13.33%–13.63%), respectively. The oils from hexane extraction of cold-pressed cake and sub-critical extraction were richer in tocopherols and tocotrienols, namely, 37.52 and 36.18 mg/100 g, respectively, with α-tocopherol most abundant. The pine nut oils from hexane extraction of cold-pressed cake,hexane extraction, cold pressing, and sub-critical extraction had better oxidation stability with the oxidation induction times of 6.91, 5.27, 4.96 and 4.93 h, respectively. Based on its features, P. koraiensis nut oil may have the multiple application in edible oil, cosmetic, and pharmaceutical industry. P. koraiensis can be one of the good woody candidates for closing the gap between the demand and production of vegetable oils.
文摘The purpose of this study is to compare the results of chemical analysis of two types of activated from the pyrolysis of bull horn and that of cow. Six samples were used to measure pH, carbon, calcium and to determine adsorbent power. The pH was measured at a temperature of 20˚C using an “ANION 7010 ionomer” pH meter, the carbon (C) content was analyzed using a “EURO EA 3000” analyzer. and the electronic balance: “Sartorius CP-2P”, calcium (Ca) was analyzed using a DFS-8 spectrograph. For the adsorbency test, the 0.15% methylene blue R solution was used. At the end of this study, we found that the activated carbon from the bull horn demonstrated a carbon content that is higher than that of the cow horn (20.79% against 15.63%), activated carbon of cow horn is richer in calcium than that of bull horn (16.27% against 3.69%) and then the pH. The cow horn is higher than that of the bull horn (7.43 versus 6.5). For the adsorbent power, the sample (75% bull horn and 25% cow horn) was recorded with the greatest adsorbent power. Thus, from this study, it can be recommended as an activated carbon antidote to be used for poisonings treatment.
文摘The international issue to be addressed towards realizing a low-carbon society is to reduce the amount of carbon-based underground reserves such as coal, petroleum, and coke, and strongly encouraged to use carbon neutral biomass-derived resources. Woodceramics is a hybrid porous carbon material composed of wood-based biomass and phenolic resin, characterized by high far-infrared emissivity and large specific surface area. Woodceramics has been studied as heating elements and humidity and gas sensors, etc. If this is applied to the inner walls of aging and grain drying furnaces for vegetables and fruits, both ripening and drying are greatly promoted and fossil fuels used in boilers can be significantly reduced. In fact, it can produce black garlic with far infrared rays using a woodceramics brick efficiently. Furthermore, as a substitute for phenolic resin, if plant-based liquefied materials from cashew nut shell oil can be prepared and can be used for manufacturing woodceramics, then all carbon neutral circulating woodceramics made from wood-based biomass is possible to manufacture. On the other hand, woodplastics is a composite material that can be made of wooden materials and plastics, and able to expect the effective use of wood-based biomass and waste plastics.
