This research was based on the manufacture of new composite materials that offer technological possibilities in the development of new devices with greater efficiency. Electrospinning was used to form nylon 66/-tetra-...This research was based on the manufacture of new composite materials that offer technological possibilities in the development of new devices with greater efficiency. Electrospinning was used to form nylon 66/-tetra-(para-aminophenyl) porphyrin (H2T(p-NH2)PP)/graphene oxide (GO) composite film. Graphene oxide coatings were obtained from graphite, through mechanical exfoliation followed by calcination and ultrasonic agitation in an oxidant solution. These samples were characterized under SEM, FTIR, Raman spectroscopy, UV-vis and R-X techniques. On the other hand, H2T(p-NH2)PP was synthesized in two steps?process by the Rothemun reaction and the Adler Method and it was integrated within nylon polyamide fibers by direct addition of a hexamethylenediamine/adipoyl chloride reactant mixture. The polymerization of the nylon/H2T(p-NH2)PP species occurs in such a way that it starts or ends on the four peripherals-NH2 groups, connected and located in the same molecular plane of H2T(p-NH2)PP, forming nylon chains at the periphery of the macrocycle. The association of GO with nylon/H2T(p-NH2)PP fibers is performed by dipole-dipole interaction and hydrogen bonding. To take advantage of the properties of these materials, they were combined as a ternary composite.展开更多
Considerable progress has been made in recent years to the development of sustainable polymers from bio-based feedstocks.In this study,100%bio-based nylons were prepared via an integrated chemical and biological proce...Considerable progress has been made in recent years to the development of sustainable polymers from bio-based feedstocks.In this study,100%bio-based nylons were prepared via an integrated chemical and biological process from lignocellulose.These novel nylons were obtained by the melt polymerization of 3-propyladipic acid derived from lignin and 1,5-pentenediamine/1,4-butanediamine derived from carbohydrate sugar.Central to the concept is a three-step noble metal free catalytic chemical funnelling sequence(Raney Ni mediated reductive catalytic fractionation-reductive funnelling-oxidative funnelling),which allowed for obtaining a single component 3-propyladipic acid from lignin with high efficiency.The structural and thermodynamic properties of the obtained nylons have been systematically investigated,and thus obtained transparent bio-based nylons exhibited higher Mw(>32,000)and excellent thermal stability(Td5%>265℃).Considering their moderate Tg and good melt strength,these transparent bio-based nylons could serve as promising functional additives or temperature-responsive materials.展开更多
Cord fabric is a critical material used in the manufacture of tyres and various composite materials to increase durability and strength. The tyre consists of many layers of cord fabric, with each layer being referred ...Cord fabric is a critical material used in the manufacture of tyres and various composite materials to increase durability and strength. The tyre consists of many layers of cord fabric, with each layer being referred to as a cord ply. These layers are strategically positioned within the tyre’s internal structure, particularly in the tread and sidewall areas, to improve handling, durability and impact resistance. The cord fabric also serves a critical role in maintaining the structural integrity of the tyre, ensuring that it retains its contour and resists deformations under different operating conditions. This study discusses the advantages and disadvantages of using Nylon 6 (NY6) and Nylon 66 (NY66) cord fabrics in scooter tire production, with a focus on their mechanical behavior under varying curing temperatures and pressures. It was observed that while the curing time for both NY6 and NY66 remained consistent across different platen temperatures and pressures, their mechanical properties showed significant differences. NY6, known for its flexibility and impact resistance, exhibited greater changes in cord-breaking strength and elongation with increasing temperature, showing a marked decrease in breaking strength at higher temperatures. In contrast, NY66 maintained better stability and performance under similar conditions.展开更多
Migdal Haemek,Israel,April 2,2024.NILIT,the global market leader,and a producer of high quality Nylon 6.6 for apparel and owner of the SENSIL?brand,introduces SENSIL?Flow,a new approach to Nylon 6.6 circularity that e...Migdal Haemek,Israel,April 2,2024.NILIT,the global market leader,and a producer of high quality Nylon 6.6 for apparel and owner of the SENSIL?brand,introduces SENSIL?Flow,a new approach to Nylon 6.6 circularity that enables yarn,fabric,and,ultimately,apparel recycling to eliminate waste and further reduce apparel’s environmental impact.SENSIL?Flow is more than just a sustainable performance product.It is an innovative approach that engages the entire supply chain to truly attain circularity through product design and partnership.展开更多
Fujian Eversun Jinjiang Co.,Ltd.(hereinafter referred to as“Eversun Jinjiang”)and China International Fabrics Design Competition once again jointly set up the“Nylon Product Development&Application Prize”in 202...Fujian Eversun Jinjiang Co.,Ltd.(hereinafter referred to as“Eversun Jinjiang”)and China International Fabrics Design Competition once again jointly set up the“Nylon Product Development&Application Prize”in 2023.After three consecutive years of growth,the award has brought together high-quality nylon products and high-level fabric development enterprises,and accelerated the process of industrial chain coordination and high-quality development.At the 2023 China International Fabrics Design Competition award ceremony held on August 28,fabrics from six outstanding textile enterprises respectively won the Fashion Color Award for Nylon Fabric,Innovation Award for Nylon Fabric Development,and Market Application Award for Nylon Fabric.The six award-winning fabrics in color,style,feel,technology,function,product fancy application has reached a new level compared to previous years.展开更多
尼龙6(PA6)树脂具有优异的性能,其连续纤维复合材料在汽车、航空航天领域具有广泛应用。但是PA6树脂熔融后黏度较高,不易对连续纤维充分浸渍,并且连续纤维与PA6的复合材料界面黏附性较差,限制了其复合材料的性能和应用。针对这些问题,...尼龙6(PA6)树脂具有优异的性能,其连续纤维复合材料在汽车、航空航天领域具有广泛应用。但是PA6树脂熔融后黏度较高,不易对连续纤维充分浸渍,并且连续纤维与PA6的复合材料界面黏附性较差,限制了其复合材料的性能和应用。针对这些问题,文中对连续玻璃纤维增强尼龙6(CGF/PA6)复合材料开展了研究。首先,采用阴离子开环聚合制备PA6,确定了其最佳制备工艺;其次,用硅烷偶联剂KH550(AP)对连续玻璃纤维(CGF)进行改性,并对其进行了红外光谱表征;最后,通过原位聚合法制备了CGF/PA6复合材料,研究了AP改性对CGF/PA6复合材料力学性能的影响,并对CGF/PA6复合材料的拉伸断口进行了扫描电镜分析。结果表明,AP被键合到了CGF表面,AP改性可以增强CGF/PA6复合材料的界面黏附性,从而使CGF/PA6复合材料的拉伸强度得到改善,当AP用量为2%时,CGF/PA6复合材料的拉伸强度高达88.52 MPa,此时,复合材料的断裂伸长率最低,为4.90%。CGF/PA6复合材料的冲击强度变化不大,均在50 k J/m2左右,说明复合材料的韧性受CGF表面改性影响较小。展开更多
文摘This research was based on the manufacture of new composite materials that offer technological possibilities in the development of new devices with greater efficiency. Electrospinning was used to form nylon 66/-tetra-(para-aminophenyl) porphyrin (H2T(p-NH2)PP)/graphene oxide (GO) composite film. Graphene oxide coatings were obtained from graphite, through mechanical exfoliation followed by calcination and ultrasonic agitation in an oxidant solution. These samples were characterized under SEM, FTIR, Raman spectroscopy, UV-vis and R-X techniques. On the other hand, H2T(p-NH2)PP was synthesized in two steps?process by the Rothemun reaction and the Adler Method and it was integrated within nylon polyamide fibers by direct addition of a hexamethylenediamine/adipoyl chloride reactant mixture. The polymerization of the nylon/H2T(p-NH2)PP species occurs in such a way that it starts or ends on the four peripherals-NH2 groups, connected and located in the same molecular plane of H2T(p-NH2)PP, forming nylon chains at the periphery of the macrocycle. The association of GO with nylon/H2T(p-NH2)PP fibers is performed by dipole-dipole interaction and hydrogen bonding. To take advantage of the properties of these materials, they were combined as a ternary composite.
基金support by National Key Research and Development Program of China(Grant No.:2023YFA0913604)Program of National Natural Science Foundation of China(Grant No.:22178170,22378195)+2 种基金Six talent peaks project in Jiangsu Province(SWYY-045)Program of National Natural Science Foundation of China(Grant No.22208155)Jiangsu Province Natural Science Foundation for Young Scholars(Grant No.BK20210552).
文摘Considerable progress has been made in recent years to the development of sustainable polymers from bio-based feedstocks.In this study,100%bio-based nylons were prepared via an integrated chemical and biological process from lignocellulose.These novel nylons were obtained by the melt polymerization of 3-propyladipic acid derived from lignin and 1,5-pentenediamine/1,4-butanediamine derived from carbohydrate sugar.Central to the concept is a three-step noble metal free catalytic chemical funnelling sequence(Raney Ni mediated reductive catalytic fractionation-reductive funnelling-oxidative funnelling),which allowed for obtaining a single component 3-propyladipic acid from lignin with high efficiency.The structural and thermodynamic properties of the obtained nylons have been systematically investigated,and thus obtained transparent bio-based nylons exhibited higher Mw(>32,000)and excellent thermal stability(Td5%>265℃).Considering their moderate Tg and good melt strength,these transparent bio-based nylons could serve as promising functional additives or temperature-responsive materials.
文摘Cord fabric is a critical material used in the manufacture of tyres and various composite materials to increase durability and strength. The tyre consists of many layers of cord fabric, with each layer being referred to as a cord ply. These layers are strategically positioned within the tyre’s internal structure, particularly in the tread and sidewall areas, to improve handling, durability and impact resistance. The cord fabric also serves a critical role in maintaining the structural integrity of the tyre, ensuring that it retains its contour and resists deformations under different operating conditions. This study discusses the advantages and disadvantages of using Nylon 6 (NY6) and Nylon 66 (NY66) cord fabrics in scooter tire production, with a focus on their mechanical behavior under varying curing temperatures and pressures. It was observed that while the curing time for both NY6 and NY66 remained consistent across different platen temperatures and pressures, their mechanical properties showed significant differences. NY6, known for its flexibility and impact resistance, exhibited greater changes in cord-breaking strength and elongation with increasing temperature, showing a marked decrease in breaking strength at higher temperatures. In contrast, NY66 maintained better stability and performance under similar conditions.
文摘Migdal Haemek,Israel,April 2,2024.NILIT,the global market leader,and a producer of high quality Nylon 6.6 for apparel and owner of the SENSIL?brand,introduces SENSIL?Flow,a new approach to Nylon 6.6 circularity that enables yarn,fabric,and,ultimately,apparel recycling to eliminate waste and further reduce apparel’s environmental impact.SENSIL?Flow is more than just a sustainable performance product.It is an innovative approach that engages the entire supply chain to truly attain circularity through product design and partnership.
文摘Fujian Eversun Jinjiang Co.,Ltd.(hereinafter referred to as“Eversun Jinjiang”)and China International Fabrics Design Competition once again jointly set up the“Nylon Product Development&Application Prize”in 2023.After three consecutive years of growth,the award has brought together high-quality nylon products and high-level fabric development enterprises,and accelerated the process of industrial chain coordination and high-quality development.At the 2023 China International Fabrics Design Competition award ceremony held on August 28,fabrics from six outstanding textile enterprises respectively won the Fashion Color Award for Nylon Fabric,Innovation Award for Nylon Fabric Development,and Market Application Award for Nylon Fabric.The six award-winning fabrics in color,style,feel,technology,function,product fancy application has reached a new level compared to previous years.
文摘尼龙6(PA6)树脂具有优异的性能,其连续纤维复合材料在汽车、航空航天领域具有广泛应用。但是PA6树脂熔融后黏度较高,不易对连续纤维充分浸渍,并且连续纤维与PA6的复合材料界面黏附性较差,限制了其复合材料的性能和应用。针对这些问题,文中对连续玻璃纤维增强尼龙6(CGF/PA6)复合材料开展了研究。首先,采用阴离子开环聚合制备PA6,确定了其最佳制备工艺;其次,用硅烷偶联剂KH550(AP)对连续玻璃纤维(CGF)进行改性,并对其进行了红外光谱表征;最后,通过原位聚合法制备了CGF/PA6复合材料,研究了AP改性对CGF/PA6复合材料力学性能的影响,并对CGF/PA6复合材料的拉伸断口进行了扫描电镜分析。结果表明,AP被键合到了CGF表面,AP改性可以增强CGF/PA6复合材料的界面黏附性,从而使CGF/PA6复合材料的拉伸强度得到改善,当AP用量为2%时,CGF/PA6复合材料的拉伸强度高达88.52 MPa,此时,复合材料的断裂伸长率最低,为4.90%。CGF/PA6复合材料的冲击强度变化不大,均在50 k J/m2左右,说明复合材料的韧性受CGF表面改性影响较小。
