Catalytic ethane dehydrogenation(EDH) to ethylene over Pt-based catalysts has received increasing interests in recent years as it is a potential alternative route to conventional steam cracking. However, the catalysts...Catalytic ethane dehydrogenation(EDH) to ethylene over Pt-based catalysts has received increasing interests in recent years as it is a potential alternative route to conventional steam cracking. However, the catalysts used in this reaction often suffer from rapid deactivation due to serious coke deposition and metal sintering. Herein, we reported the effects of Zn modification on the stability of Pt/Al2 O3 for EDH.The Zn-modified sample(PtZn2/Al2 O3) exhibits stable ethane conversion(20%) with over 95% ethylene selectivity. More importantly, it exhibits a significantly low deactivation rate of only 0.003 h-1 at 600 °C for70 h, which surpasses most of previously reported catalysts. Detailed characterizations including in situ FT-IR, ethylene adsorption microcalorimetry, and HAADF-STEM etc. reveal that Zn modifier reduces the number of Lewis acid sites on the catalyst surface. Moreover, it could modify Pt sites and preferentially cover the step sites, which decrease surface energy and retard the sintering of Pt particle, then prohibiting the further dehydrogenation of ethylene to ethylidyne. Consequently, the good stability is realized due to anti-sintering and the decrease of coke formation on the Pt Zn2/Al2 O3 catalyst.展开更多
以氧化镁粉末为载体,N2H4·H2O为还原剂,采用浸渍还原法制备Cu2O/MgO催化剂。考察制备条件对催化剂活性的影响,最佳原料配比为n(Cu2+)∶n(NaOH)∶n(N2H4·H2O)=5∶11∶5,对筛选出最佳条件下制备的催化剂进行正己醇脱氢制备正己...以氧化镁粉末为载体,N2H4·H2O为还原剂,采用浸渍还原法制备Cu2O/MgO催化剂。考察制备条件对催化剂活性的影响,最佳原料配比为n(Cu2+)∶n(NaOH)∶n(N2H4·H2O)=5∶11∶5,对筛选出最佳条件下制备的催化剂进行正己醇脱氢制备正己醛工艺条件考察,采用SEM、XRD和BET对催化剂进行表征。结果表明,在反应温度250℃、空速1.25 m L·(h·g)-1、催化剂用量12 g和N2流速0.05 L·min-1条件下,正己醇转化率为59.33%,正己醛选择性为93.81%。展开更多
Pd-supported ZSM-5 zeolites prepared through ion exchange technique were used as a dehydrogenation catalyst for synthesis of o-phenylphenol from cyclohexanone. When Si/Al ratio in the catalyst was 85∶1 or more, an ob...Pd-supported ZSM-5 zeolites prepared through ion exchange technique were used as a dehydrogenation catalyst for synthesis of o-phenylphenol from cyclohexanone. When Si/Al ratio in the catalyst was 85∶1 or more, an obvious reduction in attenuation rate of catalyst activity was observed. When the Si/Al ratio was of 17∶1 or less, polymer compounds could be formed on the surface of zeolite, that would decrease the dehydrogenation activity due to the reduction of the specific surface area of the catalyst.展开更多
基金supported by the National Natural Science Foundation of China (NNSFC 21573232, 21576251, 21676269, 21878283)the Strategic Priority Research Program of Chinese Academy of Sciences Grant No. XDB17000000+2 种基金National Key Projects for Fundamental Research and Development of China (2016YFA0202801)The Youth Innovation Promotion Association CAS (2017223)Department of Science and Technology of Liaoning province under contract of 2015020086-101。
文摘Catalytic ethane dehydrogenation(EDH) to ethylene over Pt-based catalysts has received increasing interests in recent years as it is a potential alternative route to conventional steam cracking. However, the catalysts used in this reaction often suffer from rapid deactivation due to serious coke deposition and metal sintering. Herein, we reported the effects of Zn modification on the stability of Pt/Al2 O3 for EDH.The Zn-modified sample(PtZn2/Al2 O3) exhibits stable ethane conversion(20%) with over 95% ethylene selectivity. More importantly, it exhibits a significantly low deactivation rate of only 0.003 h-1 at 600 °C for70 h, which surpasses most of previously reported catalysts. Detailed characterizations including in situ FT-IR, ethylene adsorption microcalorimetry, and HAADF-STEM etc. reveal that Zn modifier reduces the number of Lewis acid sites on the catalyst surface. Moreover, it could modify Pt sites and preferentially cover the step sites, which decrease surface energy and retard the sintering of Pt particle, then prohibiting the further dehydrogenation of ethylene to ethylidyne. Consequently, the good stability is realized due to anti-sintering and the decrease of coke formation on the Pt Zn2/Al2 O3 catalyst.
文摘以氧化镁粉末为载体,N2H4·H2O为还原剂,采用浸渍还原法制备Cu2O/MgO催化剂。考察制备条件对催化剂活性的影响,最佳原料配比为n(Cu2+)∶n(NaOH)∶n(N2H4·H2O)=5∶11∶5,对筛选出最佳条件下制备的催化剂进行正己醇脱氢制备正己醛工艺条件考察,采用SEM、XRD和BET对催化剂进行表征。结果表明,在反应温度250℃、空速1.25 m L·(h·g)-1、催化剂用量12 g和N2流速0.05 L·min-1条件下,正己醇转化率为59.33%,正己醛选择性为93.81%。
文摘Pd-supported ZSM-5 zeolites prepared through ion exchange technique were used as a dehydrogenation catalyst for synthesis of o-phenylphenol from cyclohexanone. When Si/Al ratio in the catalyst was 85∶1 or more, an obvious reduction in attenuation rate of catalyst activity was observed. When the Si/Al ratio was of 17∶1 or less, polymer compounds could be formed on the surface of zeolite, that would decrease the dehydrogenation activity due to the reduction of the specific surface area of the catalyst.
