The solid state reactions of o-aminobenzoic acid with Zn(Ⅱ), Cu(Ⅱ), Ni(Ⅱ), Mn(Ⅱ) acetate hydrate at room temperature

The solid-solid state reactions of o-aminobenzoic acid with Zn(OAc)2.2H2O, Cu(OAc)2 .H2O, Ni(OAc)2.4H2O and Mn(OAc)2.4H2O result in the formation of corresponding complexes M(OAB)2 (M = Zn(Ⅱ), Cu(Ⅱ), Ni(Ⅱ), Mn(IⅡ)). XRD, IR and elemental analysis methods have been used to characterize the solid products. The activation energies of these reactions, which are calculated from the kinetic data obtained by means of the isothermal electrical conductivity measurement method, have been found to increase in the order: Cu(OAc)2.H2O(37.7 kJ.mol-1)~Mn(OAc)2.4H2O (39.7kJ.mol-1) < Zn(OAc)2.2H2O (56.3 kJ.mol-1) < Ni(OAc)2.4H2O (85.2 kJ.mol-1). The trend is related to their crystal structures.

A New Amperometric Biosensor Based on HRP/Nano-Au/L-Cysteine/Poly（o-Aminobenzoic acid）-Membrane-Modified Platinum Electrode for the Determination of Hydrogen Peroxide

The third generation amperometric biosensor for the determination of hydrogen peroxide （H2O2） has been described. For the fabrication of biosensor, o-aminobenzoic acid （oABA） was first electropolymerized on the surface of platinum （Pt） electrode as an electrostatic repulsion layer to reject interferences. Horseradish peroxidase （HRP） absorbed by nano-scaled particulate gold （nano-Au） was immobilized on the electrode modified with polymerized o-aminobenzoic acid （poABA） with L-cysteine as a linker to prepare a biosensor for the detection of H2O2. Amperometric detection of H2O2 was realized at a potential of ＋20 mV versus SCE. The resulting biosensor exhibited fast response, excellent reproducibility and sensibility, expanded linear range and low interferences. Temperature and pH dependence and stability of the sensor were investigated. The optimal sensor gave a linear response in the range of 2.99×10^-6 to 3.55×10^-3 mol·L^-1 to H2O2 with a sensibility of 0.0177 A·L^-1·mol^-1 and a detection limit （S/N = 3） of 4.3×10^-7 mol·L^-1. The biosensor demonstrated a 95% response within less than 10 s.

Studies on Solid State Reactions of Coordination Compounds（LXXI）──Solid State Reactions of o－Aminobenzoic Acid with Copper（Ⅱ） Acetate and Formate at Room Temperature

olid state reactions of o-aminobenzoic acid (HOAB) with Cu (OAc)_2·H_2O,Cu(HCOO)_2 · 4H_2O, anhydrous Cu (OAc)_2 and Cu (HCOO)_2 at room or close toroom temperature have been investigated. The product Cu(OAB)_2 with a high yieldwas synthesized very conveniently compared witb the solution phase method. Thekinetic behavior was studied by means of the isothermal electrical conductivity mea-surement. The reactivity was found to decrease in the order : Cu(OAc)_2· H_2O>Cu(OAc)_2>Cu (HCOO)_2 ·4H_2O>Cu (HCOO)_2, which was attributable to the crystalstructures of the copper salts.

SYNTHESIS AND CHARACTERISTICS OF A CHELATING RESIN AS AN EXTRACTANT AND CHROMOGENIC REAGENT OF HEAVY METAL IONS IN SOLID PHASE EXTRACTION

A new chelating resin （CPS-DMA-SABA） was synthesized with the chloromethylated crossqinked polystyrene porous beads （CPS） as raw materials, which were bonded with salicylidene-o-aminobenzoic acid （SABA） on the surface via a quaternary ammonium unit as a linker. The results showed that CPS-DMA-SABA would easily change into a zwitterionic chelating resin （CPS-DMA-SABZ） when washed with distilled water. CPS-DMA-SABA was characterized by elemental analysis, infrared spectra and thermo-gravimetric analysis. The ion sorption capacities of CPS-DMA-SABA were found to be 1916 μg/g for Zn2＋ withpH at 4.5, 1620μg/g for Cu2＋ with pH at 6.2, 1291 μg/g for Ni2＋ withpH at 6.6 and 780 μg/g for Cr3＋ withpH at 5.5, respectively. The experiments showed CPS-DMA-SABA also changed its color when meeting with the metal ion in the aqueous solution. As a consequence, CPS-DMA-SABA can not only be used as a solid phase extractant but also an indicator for confirming the heavy metal ion in solutions.