Oriented Bounding Box Object Detection Model Based on Improved YOLOv8

In the study of oriented bounding boxes(OBB)object detection in high-resolution remote sensing images,the problem of missed and wrong detection of small targets occurs because the targets are too small and have different orientations.Existing OBB object detection for remote sensing images,although making good progress,mainly focuses on directional modeling,while less consideration is given to the size of the object as well as the problem of missed detection.In this study,a method based on improved YOLOv8 was proposed for detecting oriented objects in remote sensing images,which can improve the detection precision of oriented objects in remote sensing images.Firstly,the ResCBAMG module was innovatively designed,which could better extract channel and spatial correlation information.Secondly,the innovative top-down feature fusion layer network structure was proposed in conjunction with the Efficient Channel Attention(ECA)attention module,which helped to capture inter-local cross-channel interaction information appropriately.Finally,we introduced an innovative ResCBAMG module between the different C2f modules and detection heads of the bottom-up feature fusion layer.This innovative structure helped the model to better focus on the target area.The precision and robustness of oriented target detection were also improved.Experimental results on the DOTA-v1.5 dataset showed that the detection Precision,mAP@0.5,and mAP@0.5:0.95 metrics of the improved model are better compared to the original model.This improvement is effective in detecting small targets and complex scenes.

Method of Establishing Object-Oriented System Structure for Decision Support System

In order to solve existing problems about the method of establishing traditional system structure of decision support system(DSS), O S chart is applied to describe object oriented system structure of general DSS, and a new method of eight specific steps is proposed to establish object oriented system structure of DSS by using the method of O S chart, which is applied successfully to the development of the DSS for the energy system ecology engineering research of the Wangheqiu country. Supplying many scientific effective computing models, decision support ways and a lot of accurate reliable decision data, the DSS plays a critical part in helping engineering researchers to make correct decisions. Because the period for developing the DSS is relatively shorter, the new way improves the efficiency of establishing DSS greatly. It also makes the DSS of system structure more flexible and easy to expand.

Modeling of Intelligent Integrated Network Management System Using Object Oriented Approach *

The concept of intelligent integrated network management (IINM) is briefly introduced. In order to analyze, design and implement IINM successfully, object oriented approach is testified to be an effective and efficient way. In this paper, object oriented technique is applied to the structural model of IINM system, The Domain object class and the MU object class are used to represent the manager and the managed resources. Especially, NM IA is introduced which is a special object class with intelligent behaviors to manage the resources efficiently.

DESIGN OF WINDOW BASED AND OBJECT ORIENTED GUI

This paper discusses the design concept and method about window based and object oriented Graphic User Interface(GUI),and describes the definition of each class in detail. It is developed with Watcom C ++ in DOS environment.The GUI can be redeveloped conveniently and effectively by users.It consists of window,popup menu,icon,button and other components.

OBJECT ORIENTED DATA MODELLING WITH APPLICATIONS TO CAD

An object oriented data modelling in computer aided design (CAD) databases is focused. Starting with the discussion of data modelling requirements for CAD applications, appropriate data modelling features are introduced herewith. A feasible approach to select the “best” data model for an application is to analyze the data which has to be stored in the database. A data model is appropriate for modelling a given task if the information of the application environment can be easily mapped to the data model. Thus, the involved data are analyzed and then object oriented data model appropriate for CAD applications are derived. Based on the reviewed object oriented techniques applied in CAD, object oriented data modelling in CAD is addressed in details. At last 3D geometrical data models and implementation of their data model using the object oriented method are presented.

A Study on the Design for Object-Oriented Adaptive Decision-Making Teams

The modern war features a highly distributed coordination. In the face of great time constrains, it is important to change command organizations to adapt to the real environment. Therefore it's a key step to set up adaptive C2 teams. In this paper, the relational problems about distributed C2 organizational structure adaptation are discussed, and the methodology for team decision making design based on the object oriented technique is studied.

Dynamic Slicing of Object Oriented Programs

Program slice has many applications such as program debugging, testing, maintenance, and complexity measurement. A static slice consists of all statements in program P that may effect the value of variable v at some point p , and a dynamic slice consists only of statements that influence the value of variable occurrence for specific program inputs. In this paper, we concern the problem of dynamic slicing of object oriented programs which, to our knowledge, has not been addressed in the literatures. To solve this problem, we present the dynamic object oriented dependence graph (DODG)which is an arc classified digraph to explicitly represent various dynamic dependence between statement instances for a particular execution of an object oriented program. Based on the DODG, we present a two phase backward algorithm for computing a dynamic slice of an object oriented program.

Evolving Objects for Software Engineering

This paper is concerned with evolving objects method for software design that can adapt to the changing environments and requirements automatically. We present system architecture with objects library, where there are objects based on domain ontologies. We define some genetic operators for objects, and discuss how to apply these genetic operators on objects to get new objects, which can satisfy new requirements.

A Way to Build Software Culture: Distributed Object-Oriented Software Engineering over Internet

This paper focuses on Distributed Object Oriented Software Engineering over Internet, which is a way to build software culture. We believe that our work will contribute to better understanding of how to meet the needs of the big potential software market and to promote the software industry in developing country. The United States and Western Europe have well established software industry and related civilization. Software science, technology, and engineering are needed in China; however, maybe what is needed, first of all, is software civilization, including software ideas, customs, skills, arts, etc. We will draw a framework for the software culture as following: Software is the most important commodity in this age; Brilliance of hardware component era has become past fact; A software component era is ahead; Traditional linear process model is obsolete; Modern software engineering has a new face, object evolution model; Distributed object oriented software engineering over Internet is an approach to software component era; and Complete software civilization will be formed all over the world in next century.

Object-Oriented Design for FDTD Visual Scientific Computing

A scheme for general purposed FDTD visual scientific computing software is introduced in this paper using object-oriented design (OOD) method. By abstracting the parameters of FDTD grids to an individual class and separating from the iteration procedure, the visual software can be adapted to more comprehensive computing problems. Real-time gray degree graphic and wave curve of the results can be achieved using DirectX technique. The special difference equation and data structure in dispersive medium are considered, and the peculiarity of parameters in perfectly matched layer are also discussed.

An object oriented multi-robotic graphic simulation environment for programming the welding tasks

An object oriented multi robotic graphic simulation environment is described in this paper. Object oriented programming is used to model the physical objects of the robotic workcell in the form of software objects or classes. The virtual objects are defined to provide the user with a user friendly interface including realistic graphic simulation and clarify the software architecture. The programming method of associating the task object with active object effectively increases the software reusability, maintainability and modifiability. Task level programming is also demonstrated through a multi robot welding task that allows the user to concentrate on the most important aspects of the tasks. The multi thread programming technique is used to simulate the interaction of multiple tasks. Finally, a virtual test is carried out in the graphic simulation environment to observe design and program errors and fix them before downloading the software to the real workcell.

Feature-based and objectoriented product information model for welding structure

Product information model for welding structure plays an important role for the integration of welding CAD/CAPP/CAM. However, existing CAD modeling systems are not capable of providing enough information for subsequent manufacturing activities such as CAPP and CAM. A new design approach using feature technique and object oriented programming method is put forward in this paper in order to create the product information model of welding structure. With this approach, the product information model is able to effectively support computer aided welding process planning, fixturing, assembling, path planning of welding robot and other manufacturing activities. The feature classification and representing scheme of welding structure are discussed. A prototype system is developed based on feature and object oriented programming. Its structure and functions are given in detail.

Diagnosing Student Learning Problems in Object Oriented Programming

Students often face difficulties while taking basic programming courses due to several factors. In response, research has presented subjective assessments for diagnosing learning problems to improve the teaching of programming in higher education. In this paper, the authors propose an Object Oriented conceptual map model and organize this approach into three levels： constructing a Concept Effect Propagation Table, constructing Test Item-Concept Relationships and diagnosing Student Learning Problems with Matrix Composition. The authors＇ work is a modification of the approaches of Chert and Bai as well as Chu et al., as the authors use statistical methods, rather than fuzzy sets, for the authors＇ analysis. This paper includes a statistical summary, which has been tested on a small sample of students in King Abdulaziz University, Jeddah, Saudi Arabia, illustrating the learning problems in an Object Oriented course. The experimental results have demonstrated that this approach might aid learning and teaching in an effective way.

The Feature-Based a New Object Coding Approach for Prismatic Parts at the Part Modeling

Use of features in order to achieve the integration of design and manufacture has been considered to be a key factor recent years. Features such as manufacturing properties form the workpiece. Features are structured systematically through object oriented modeling. This article explains an object coding method developed for prismatic workpieces and the use of that method in process planning. Features have been determined and modeled as objects. Features have been coded according to their types and locations on the workpiece in this given method. Feature codings have been seen to be very advantageous in process planning.

GEAR BOX CONCEPT DESIGN EXPERT SYSTEM OF NC MILLER BASED ON OBJECT─ORIENTED TECHNOLOGY

The method and basic structure of object─oriented knowledge representation are presented in detail and the hierarchical structurc of object description is explained Based on object─oriented technology.the gear box concept design expert cistem of NC miller (GBCDLS) has been developed and applied to practical use.Moreover. the design principlc and techniques of GBCDES are discussed and analyzed. and the main functions of GBCDES are described. From the results of applications.it can be seen that GBCDES is effective and successful.

The System Design of Semiconductor Device Simulator

This paper studies the numerical simulation for semiconductor devices and discusses the software design of the simulation system. Our focus is on the deep submicron device simulation for BJT, MOSFET, heterojunction bipolar transistors (HBT), etc. So the object oriented technology for software design and its realization is used to make the system easy to implement, maintain and extend. Besides the discussion of simulation and software system design, this paper introduces a device simulator SMDS and its parallel extension under local network environment using CORBA technology.

A FAULT ISOLATION EXPERT SYSTEM FOR ENGINE INDICATION AND CREW ALERTING SYSTEM

This paper is devoted to develop an expert system to manage the fault isolation and maintenance knowledge of the engine indication and crew alerting system (EICAS). The object oriented programming (OOP) technique and the microsoft foundation class (MFC) are applied to set up a frame decision tree (FDT) which incorporates the expert system′s knowledge base, inference engine and user interface. Once a fault symptom indicated by the EICAS is input, by inferring step by step, the expert system can locate it in the engine and provide some homologous constructive maintenance advice.

Application of Petri Net to Fault Diagnosis in Satellite

A prototype of fault diagnosis based on Petri net, which is developed for a satellite tele-control subsystem, is introduced in this paper. Its structure is first given with the emphasis on a Petri net modeling tool which is designed using the object oriented method. The prototype is connected to the database with DAO (Date Access Object) technique, and makes the Petri net's firing mechanism and its analyzing methods to be packed up as DLL (Dynamic Link Library) documents. Compared with the rule-based expert system method, the Petri net-based one can store the knowledge in mathematical matrix and make inference more quickly and effectively.

Software Engineering Technology for the 21^(st) Century

In this paper we will discuss the software engineering technology for the 21 st century. First we review development over the last half century, overview application requirement and environment, accept a challenge. Then we outline following software engineering techniques: 1) Process;2) Analysis;3) Design;4) UML;5) Component;6) Java +XML;7) Integrated;8) Quality(ISO9000&CMM).