Train post‑derailment behaviours and containment methods:a review

Railway accidents,particularly serious derailments,can lead to catastrophic consequences.Therefore,it is essential to prevent derailment escalation to reduce the likelihood of severe derailments.Train post-derailment behaviours and containment methods play a critical role in preventing derailment escalation and providing passive safety protection and accident prevention in the event of a derailment.However,despite the increasing attention on this field from academia and industry in recent years,there is a lack of systematic exploration and summarization of emerging applications and containment methods in train post-derailment research.For this reason,this paper presents a comprehensive review of existing studies on train post-derailment behaviours,encompassing various topics such as post-derailment contact-impact models,dynamic modelling and simulation techniques,and the primary factors influencing post-derailment behaviours.Significantly,this review introduces and elucidates substitute guidance mechanisms(SGMs),which serve as railway-specific passive safety protection and accident prevention measures.The various types of SGMs are depicted,and their ongoing developments and applications are explored in depth.The review additionally points out several unresolved challenges including the adverse effects of SGMs,and proposes future research directions to advance the theoretical understanding and practical application of train post-derailment behaviours and containment methods.This review seeks to be a valuable reference for railway industry professionals in preventing catastrophic derailment consequences through post-derailment containment methods.

Suicidal Behaviours in Sickle Cell Patients at the Douala Sickle Cell Care Centre in Cameroon

Introduction: Sickle cell anaemia is a hereditary disease that combines physical and psychological manifestations, including suicidal tendencies. So far, to our knowledge, no study has been conducted on suicidal behaviours among people with sickle cell disease in Cameroon. This is what justifies our study on the prevalence and factors related to suicidal behaviors in our study population. Methods: We conducted a cross-sectional, analytical study of 171 sickle cell patients aged from 12 years upwards who came to the sickle cell disease care service of the Laquintinie Hospital in Douala, over a period of 6 months, that is, from 1 January to 31 June 2022. Data were collected using a structured questionnaire with questions on suicidal behaviours based on the “MINI” (Mini International Neuropsychiatric Interview). The data were processed using the SPSS 26.0 software. The related factors were studied in both a bivariate and multivariate analysis. Results: Female sickle cell patients accounted for 60.2% of the sample. The mean age was 23.36 ± 8.42 years. Suicidal ideation was prevalent in 56% of cases and 13% attempted suicide. The factors most associated with suicidal ideation were: primary level of education (OR = 0.08 (0.09 - 0.79);p = 0.03), feeling unworthy of life (OR = 0.40 (0.08 - 1.96);p = 0.02), not often being considered by those around them (OR = 2.97 (1.26 - 6.99);p = 0.01), lack of family support (OR = 0.34 (0.15 - 0.77);p = 0.01). Meanwhile, the factors associated with suicide attempts were: the fact of being rarely exposed to suicide-related media (OR = 4.17 (1.40 - 71.80);p = 0.03), and a constant feeling of sadness when returning home (OR = 18.02 (1.59 - 20.55);p = 0.01). Conclusion: More than half of sickle cell patients had had suicidal thoughts and 1/6 had made at least one suicide attempt, women and young adults being the most concerned. It is therefore necessary to ensure optimum psychological care for patients with sickle cell disease.

When Fleeing Matters:Differences in Escape Behaviours of Three Northeast Asian Anurans

Prey species may have their own optimal escape strategy to balance predation risks and the energetic cost of fleeing.Some species have an advantage when maintaining a short fleeing distance,while others may favour an earlier escape based on microhabitat,size,or body condition.Here,we examined the escape behaviour of the three syntopic Northeast Asian anuran species:Mongolian toads(Strauchbufo raddei),Amur brown frogs(Rana amurensis),and Japanese treefrogs(Dryophytes japonicus)in Mongolia,Russia,China and DPR Korea.We examined flight initiation distance(FID;the distance from a potential predator to the point when the individual starts to flee)and distance fled(DF;distance between flight initiation and flight termination points)of each species and the effects of microhabitat,sex,and body size.Strauchbufo raddei and R.amurensis had a longer FID than D.japonicus,and S.raddei also had a longer DF than D.japonicus.These trends remained similar when dividing FID and DF by a size proxy(snout-vent length)for all individuals.This suggests that the treefrog D.japonicus used a strategy to stay immobile even when they were detected,and the toad S.raddei reacted quicker and more sensitively to predators despite the presence of toxin.Female S.raddei had a significantly longer FID than males suggesting that females are more sensitive to predation risk in this species,but body size was not significant for any of the three species.Our results indicate that the three sympatric species have different escaping strategies,likely related to differences in physiology and crypticity.

Mechanical behaviours of bedded sandstone under hydromechanical coupling

The combination of the dipping effect and hydromechanical(H-M)coupling effect can easily lead to water inrush disasters in water-rich roadways with different dip angles in coal mines.Therefore,H-M coupling tests of bedded sandstones under identical osmotic pressure and various confining pressures were conducted.Then,the evolution curves of stress-strain,permeability and damage,macro-and mesoscopic failure characteristics were obtained.Subsequently,the mechanical behaviour was characterized,and finally the failure mechanism was revealed.The results showed that:(1)The failure of the sandstone with the bedding angle of 45°or 60°was the structure-dominant type,while that with the bedding angle of 0°,30°or 90°was the force-dominant type.(2)When the bedding angle was in the range of(0°,30°)or(45°,90°),the confining pressure played a dominant role in influencing the peak strength.However,withinβ∈(30°,45°),the bedding effect played a dominant role in the peak strength.(3)With the increase in bedding angle,the cohesion increased first,then decreased and finally increased,while the internal friction angle was the opposite.(4)When the bedding angle was 0°or 30°,the“water wedging”effect and the“bedding buckling”effect would lead to the forking or converging shear failure.When the bedding angle was 45°or 60°,the sliding friction effect would lead to the shear slipping failure.When the bedding angle was 90°,the combination of the“bedding buckling”effect and shear effect would lead to the mixed tension-shear failure.The above conclusions obtained are helpful for the prevention of water inrush disasters in water-rich roadways with different dips in coal mines.

Wetting Behaviours of a Single Droplet on Biomimetic Micro Structured Surfaces

Natural surfaces with super hydrophobic properties often have micro or hierarchical structures.In this paper, the wettingbehaviours of a single droplet on biomimetic micro structured surfaces with different roughness parameters are investigated.Atheoretical model is proposed to study wetting transitions.The results of theoretical analysis are compared with those of experimentindicating that the proposed model can effectively predict the wetting transition.Furthermore, a numerical simulationbased on the meso scale Lattice Boltzmann Method （LBM） is performed to study dynamic contact angles, contact lines, andlocal velocity fields for the case that a droplet displays on the micro structured surface.A spherical water droplet with r= 15 μmfalls down to a biomimetic square-post patterned surface under the force of gravity with an initial velocity of 0.01 m·sand aninitial vertical distance of 20 μm from droplet centre to the top of pots.In spite of a higher initial velocity, the droplet can stillstay in a Cassie state; moreover, it reaches an equilibrium state at t≈17.5 ms, when contact angle is 153.16° which is slightlylower than the prediction of Cassie-Baxter’s equation which gives θ=154.40°.

Critical behaviours and magnetic properties of three-dimensional bond and anisotropy dilution Blume-Capel model in the presence of an applied field

This paper studies the critical behaviours and magnetic properties of three-dimensional bond and anisotropy dilution Blume-Capel model （BCM） in the presence of an applied field within the effective field theory. The trajectory of tricritical point, reentrant transitions and degenerate patterns of anisotropy are obtained both for the bond and the anisotropy dilutions. The global phase diagrams demonstrate unusually reentrant phenomena. The temperature dependences of magnetization curves undergo remarkable spin glass behaviour at low temperatures, and transform from ferromagnetism to paramagnetism at high temperature in applied fields. Temperature dependence of magnetic susceptibility curve is in qualitative agreement with experimental result.

High-cycle fatigue and fracture behaviours of SLM AlSi10Mg alloy

The high-cycle fatigue and fracture behaviours of the selective laser melting(SLM)AlSi10Mg alloy were investigated.Flat specimens were designed directly in the shape required for the fatigue tests under pulsating loading in tension(R=0,R is the dynamic factor).The fatigue−life(S−N)curves were modelled with a conditional Weibull’s probability density function,where the real-valued genetic algorithm(GA)and the differential ant-stigmergy algorithm(DASA)were applied to estimating the needed Weibull’s parameters.The fractography of the fatigue specimens showed that the fatigue cracks initiated around the surface defects produced by SLM and then propagated in an unstable manner.However,the presence of large SLM defects mainly influenced the crack initiation period and did not have a strong influence on the crack propagation.The obtained experimental results present a basis for further investigation of the fatigue behaviour of advanced materials and structures(e.g.cellular metamaterials)fabricated by additive manufacturing(AM).Especially,in the case of two-dimensional cellular structures,the cross-section of cellular struts is usually rectangular which corresponds to the specimen shape considered in this work.

Competing role of catalysis-coagulation and catalysis-fragmentation in kinetic aggregation behaviours

We propose a kinetic aggregation model where species A aggregates evolve by the catalysis-coagulation and the catalysis-fragmentation, while the catalyst aggregates of the same species B or C perform self-coagulation processes. By means of the generalized Smoluchowski rate equation based on the mean-field assumption, we study the kinetic behaviours of the system with the catalysis-coagulation rate kernel K（i,j;l） l^v and the catalysis-fragmentation rate kernel F（i,j; l） l^μ, where l is the size of the catalyst aggregate, and v and μ are two parameters reflecting the dependence of the catalysis reaction on the size of the catalyst aggregate. The relation between the values of parameters v and μ reflects the competing roles between the two catalysis processes in the kinetic evolution of species A. It is found that the competing roles of the catalysis-coagulation and catalysis-fragmentation in the kinetic aggregation behaviours are not determined simply by the relation between the two parameters v and μ, but also depend on the values of these two parameters. When v 〉 μ and v ≥0, the kinetic evolution of species A is dominated by the catalysis-coagulation and its aggregate size distribution αk（t） obeys the conventional or generalized scaling law; when v 〈 μ and v ≥ 0 or v 〈 0 but μ≥ 0, the catalysis-fragmentation process may play a dominating role and ak（t） approaches the scale-free form; and in other cases, a balance is established between the two competing processes at large times and ακ（t） obeys a modified scaling law.

Hydrogen storage behaviours of nanocrystalline and amorphous Mg_(20)Ni_(10-x)Co_x(x=0-4) alloys prepared by melt spinning

The Mg2Ni-type alloys with nominal compositions of Mg20Ni10-xCox(x=0,1,2,3,4,%,mass fraction) were prepared by melt-spinning technology.The structures of the alloys were studied by XRD,SEM and HRTEM.The hydrogen absorption/desorption kinetics and the electrochemical performances of the alloys were measured.The results show that no amorphous phase forms in the as-spun Co-free alloy,but the as-spun alloys containing Co show a certain amount of amorphous phase.The hydrogen absorption capacities of the as-cast alloys first increase and then decrease with the incremental change of Co content.The hydrogen desorption capacities of as-cast and spun alloys rise with increasing Co content.The melt spinning significantly improves the hydrogenation and dehydrogenation capacities and kinetics of the alloys.The substitution of Co for Ni clearly enhances the discharge capacities of the alloys and the cycle stability of the as-spun alloys.

Cylindrical-confinement-induced phase behaviours of diblock copolymer melts

The phase behaviours of diblock copolymers under cylindrical confinement are studied in two-dimensional space by using the self-consistent field theory. Several phase parameters are adjusted to investigate the cylindrical-confinement-induced phase behaviours of diblock copolymers. A series of lamella-cylinder mixture phases, such as the mixture of broken-lamellae and cylinders and the mixture of square-lamellae and cylinders, are observed by varying the phase parameters, in which the behaviours of these mixture phases are discussed in the corresponding phase diagrams. Furthermore, the free energies of these mixture phases are investigated to illustrate their evolution processes. Our results are compared with the available observations from the experiments and simulations respectively, and they are in good agreement and provide an insight into the phase behaviours under cylindrical confinement.

Travel Behaviours of Sharing Bicycles in the Central Urban Area Based on Geographically Weighted Regression: The Case of Guangzhou, China

Mobile information and communication technologies(MICTs) have fully penetrated everyday life in smart societies;this has greatly compressed time, space, and distance, and consequently, reshaped residents’ travel behaviour patterns. As a new mode of shared mobility, the sharing bicycle offers a variety of options for the daily travel of urban residents. Extant studies have mainly examined the travel characteristics and influencing factors of public bicycles with piles, while the travel patterns for sharing bicycles and their driving mechanisms have been largely ignored. Using one week’s travel data for Mobike, this study investigated the spatial and temporal distribution patterns of sharing bicycle travel behaviours in the central urban area of Guangzhou, China;furthermore, it identified the influences of built environment density factors on sharing bicycle travel behaviours based on the geographically weighted regression method. Obvious morning and evening peaks were observed in the sharing bicycle travel patterns for both weekdays and weekends. The old urban area, which had a high degree of mixed function, dense road networks, and cycling-friendly built environments, was the main travel area that attracted sharing bicycles on both weekdays and weekends. Furthermore, factors including the point of interest(POI) for the density of public transport stations, the functional mixing degree, and the density of residential POIs significantly affected residents’ travel behaviours. These findings could enrich discourse regarding shared mobility with a Chinese case characterised by rapidly developing MICTs and also provide references to local authorities for improving slow traffic environments.

Health-Promoting Behaviours of University Nursing Students in Jordan

The purpose of this study was to determine health-promoting behaviours of university nursing students in Jordan. This descriptive cross-sectional study used convenient sampling technique to recruit 167 undergraduate nursing students in Jordan. Data were collected by using an Arabic version of Health-Promoting Lifestyle Profile II. The study results revealed that the mean item score for total Health-Promoting Lifestyle Profile II was (127.24 ± 21.03). The students obtained highest scores in spiritual growth (25.04 ± 4.70) and lowest in physical activity subscales (16.27 ± 5.21). Significant difference was found between Health-Promoting Lifestyle Profile II subscales (stress management, health responsibility, and interpersonal relations) and students’ age and gender.

A novel model of drug cue-induced behaviours in rhesus macaque subjected to chronic ketamine exposure

To the Editor,Non-human primate(NHP)models are advantageous for mimicking human addiction with high behavioural validity.1 However,current NHP drug addiction models(eg,self-administration)often require a comprehensive behavioural training paradigm,relatively expensive apparatus and invasive surgical procedures.

Bystanders'behaviours and associated factors in cyberbullying

Background Cyberbullying is presently an alarming problem worldwide due to its impact on the emotions,behaviour and psychological well-being of not only the victims,but the bullies themselves and also bystanders.Aim This study aims to investigate bystanders'behaviours in cyberbullying and associated factors.Methods This research is a cross-sectional study of 578 secondary school students in Bangkok,Thailand.Simple random sampling was used to select four secondary schools.Data were collected through online questionnaires which included four sections:(1)demographic data,(2)bystanders'behaviour in cyberbullying(cyberbullying experience and attitude towards cyberbullying were included in this section),(3)parental attachment(nventory of Parent Attachment-Revised),and(4)self-esteem(Rosenberg Self-Esteem Scale-Revised).Results It was found that most occurrences of bystanders'behaviour were:(a)willing to intervene or help victims(34.6%),(b)ignoring the cyberbullying(28%)or(c)partaking in cberbulling(263%).Participants who either were victims of cyberbullying or knew of cyberbullying happening to friends or relatives and had high parental attachment would intervene more than those Who never had such experiences.Participants Who knew of cyberbullying happening to the general public had tendencies towards ignoring the cyberbulying.Participants who indicated they were bullies and had positive atitude towards joining in tended to partake in the cyberbullying more than those who were not.Conclusion Factors relating to the behaviours of bystanders in cyberbullying should be further explored to provide support in the discouragement of ignoring and averting participation in cyberbullying.Secure parental attachment is one important factor that should be instilled during childhood years.

The current status of foot self-care knowledge, behaviours, and analysis of influencing factors in patients with type 2 diabetes mellitus in China

Purpose:To investigate the knowledge and behaviours on foot self-care in patients with type 2 diabetes mellitus;analyse the influential factors,and provide information for the intervention study.Methods:A total of 5961 patients with type 2 diabetes mellitus from 144 hospitals in China were included in the study.The investigation content included patients'demographic data,foot self-care knowledge and behaviours.The investigation tools were the questionnaires on the general diabetes information,on the foot self-care knowledge,and on the foot selfcare behaviours.Results:The foot self-care knowledge was medium and the foot self-care behaviour was poor.The status of knowledge and behaviours were influenced by education,duration of diabetes mellitus,periodic inspection,and education about diabetic complications.Pearson analysis demonstrated that there was positive correlation between knowledge score and behaviour score(r?0.27,p<0.001).Conclusions:The status of foot self-care knowledge and behaviours are not optimistic.According to the patients'own characteristics,the theory of knowledge,attitude and practice applies to encouraging patients to go for periodic inspection and education about diabetic complications so as to enhance the knowledge and promote the self-care behaviours.

Numerical Investigations on Transient Behaviours of Two 3-D Freely Floating Structures by Using a Fully Nonlinear Method

Two floating structures in close proximity are very commonly seen in offshore engineering. They are often subjected to steep waves and, therefore, the transient effects on their hydrodynamic features are of great concem. This paper uses the quasi arbitrary Lagrangian Eulerian finite element method （QALE-FEM）, based on the fully nonlinear potential theory （FNPT）, to numerically investigate the interaction between two 3-D floating structures, which undergo motions with 6 degrees of freedom （DOFs）, and are subjected to waves with different incident angles. The transient behaviours of floating structures, the effect of the accompanied structures, and the nonlinearity on the motion of and the wave loads on the structures are the main focuses of the study. The investigation reveals an important transient effects causing considerably larger structure motion than that in steady state. The results also indicate that the accompanied structure in close proximity enhances the interaction between different motion modes and results in stronger nonlinearity causing 2hal-order component to be of similar significance to the fundamental one.

Effect of Pre-strain on the Transformation and Recovery Behaviours of a Ti_(44)Ni_(47)Nb_9 Shape Memory Alloy

The recovery strain, stress and transformation temperature of different pre-strained specimens of Ti44Ni47Nb9 were investigated by tensile test and electrical resistance measurement. The results indicated that pre-strain increases the reverse martensitic transformation temperature (A ' (s)) and hysteresis (A(s) - M-s). The recovery strain and stress are higher if the specimens are pre-strained between M-s and A(s) temperature than outside this temperature range. There exists an optimal pre-strain value, about 10%, at which the specimen exhibits maximum recovery strain and stress.

Effects of a flexible net barrier on the dynamic behaviours and interception of debris flows in mountainous areas

Flexible net barriers are a new type of effective mitigation measure against debris flows in valleys and can affect the kinematic energy and mass of debris flows. Here, ten flume tests were performed to study the dynamic behaviours of debris flows with differences in volumes, concentrations(solid volume fraction), and travel distances after interception by a uniform flexible net barrier. A high-speed camera was used to monitor the whole test process, and their dynamic behaviours were recorded. A preliminary computational framework on energy conversion is proposed according to the deposition mechanisms and outflow of debris flow under the effects of the flexible net barrier. The experimental results show that the dynamic interaction process between a debris flow and the flexible net barrier can be divided into two stages:(a) the two-phase impact of the leading edge of the debris flow with the net and(b) collision and friction between the body of the debris flow and intercepted debris material. The approach velocity of a debris flow decreases sharply(a maximum of 63%) after the interception by the net barrier, and the mass ratio of the debris material being intercepted and the kinetic energy ratio of the debris material being absorbed by the net barrier are close due to the limited interception efficiency of the flexible net barrier, which is believed to be related to the flexibility. The energy ratio of outflow is relative small despite the large permeability of the flexible net barrier.

NUCLEATION BEHAVIOURS OF SILVER ON GLASSY CARBON MICROELECTRODES

The initial stage of silver deposition has been investigated using the microelectrode technique A disc shaped nucleus can be obtained on glassy carbon microelectrodes and the instanta. neous nucleation model applies for the process

The coupled hydro-mechanical behaviours of compacted crushed Callovo-Oxfordian argillite

Callovo-Oxfordian （COx） argillite obtained from the excavation of high-level radioactive waste geological disposal has been evaluated as an alternative sealing/backfill material in France. This paper presents an experimental investigation into the hydro-mechanical behaviour of compacted crushed COx argillite. A series of oedorneter compressive tests including various loading-unloading cycles were conducted on COx argillite powders at different initial water contents. After reaching the desired dry density （2.0 Mg/m^3）, the vertical stress was reduced to different levels （7.0 and 0.5 MPa） and the compacted sample was then flooded under constant volume conditions while measuring the changes in the vertical stress. It was found that the initial water content significantly affects the compressive behaviour. The measured saturated hydraulic conductivity is less than 1×10^-10m/s.