Practice of Infection Prevention and Control Strategies in Risk Departments during the COVID-19 Epidemic

Objective: To explore the practice and application of infection prevention and control strategies in risk departments during the COVID-19 epidemic, and to formulate the infection prevention and control measures to provide advice and guidance in risk departments. Methods: According to the latest plan of diagnosis and treatment, prevention and control issued by the National Health Commission, expert advice and consensus, combined with the actual situation in our hospital, a series of infection prevention and control measures of COVID-19 in risk department was formulated. Results: During the epidemic period, the prevention and control measures of nine risk departments including emergency operation, anesthesiology, endoscopy center, blood purification center, otolaryngology, stomatology, medical imaging department, medical cosmetology department and pulmonary function room were established from six aspects, including pre-examination and screening, medical technology control, personnel management, personal protection, environmental disinfection, medical waste disposal, etc. Conclusion: During the epidemic period, the infection prevention and control strategy of risk departments is one of the key links to control the spread of the epidemic, and risk departments must pay attention to and strictly implement various infection prevention and control measures.

Prevention and Control Strategies of Nosocomial Infection and Effectiveness Evaluation in a Tertiary Teaching Hospital during the Epidemic of COVID-19

Objective: To evaluate the role of prevention and control strategies for nosocomial infection in a tertiary teaching hospital during the sudden outbreak of Corona Virus Disease 2019 (COVID-19). Methods: The hospital initiated an emergency plan involving multi-departmental defense and control. It adopted a series of nosocomial infection prevention and control measures, including strengthening pre-examination and triage, optimizing the consultation process, improving the hospital’s architectural composition, implementing graded risk management, enhancing personal protection, and implementing staff training and supervision. Descriptive research was used to evaluate the short-term effects of these in-hospital prevention and control strategies. The analysis compared changes in related evaluation indicators between January 24, 2020 and February 12, 2020 (Chinese Lunar New Year’s Eve 2020 to lunar January 19) and the corresponding lunar period of the previous year. Results: Compared to the same period last year, the outpatient fever rate increased by 1.85-fold (P P Conclusion: The nosocomial infection prevention and control strategies implemented during this specific period improved the detection and control abilities for the COVID-19 source of infection and enhanced the compliance with measures. This likely contributed significantly to avoiding the occurrence of nosocomial infection.

Empowering women to combat osteoporosis:unveiling the causes,consequences,and control strategies

Osteoporosis is a common bone disease in women worldwide, leading to decreased bone density and an accelerated risk of fractures. The causes of osteoporosis in women include age (senile osteoporosis), menopause-associated hormonal changes, deficiencies in calcium and vitamin D, genetics, lifestyle factors, medical conditions, and some type of medications. The consequences of osteoporosis are colossal, consisting of fractures, decreased quality of life, psychological impacts, and economic burden. To effectively control the menace of osteoporosis in women, numerous strategies are advocated. Adequate calcium and vitamin D consumption through diet or supplements is vital. Regular weight-bearing activities and strength training that promote bone density. Maintaining a healthy life-style through avoiding smoking, limiting alcohol in-take and maintaining a wholesome body weight is essential. Hormone replacement therapy and some medications may be recommended in certain cases. Early detection through regular bone density and blood tests is crucial to lowering its impact. Creating a supportive network through educational programs and resources fosters awareness and empowerment. By engaging these strategies, women can be empowered to combat osteoporosis, reduce fracture risk, and build stronger bones for their overall well-being.

Control strategies and experimental verifications of the electromagnetic mass damper system for structural vibration control

The electromagnetic mass damper （EMD） control system, as an innovative active control system to reduce structural vibration, offers many advantages over traditional active mass driver/damper （AMD） control systems. In this paper, studies of several EMD control strategies and bench-scale shaking table tests of a two-story model structure are described. First, two structural models corresponding to uncontrolled and Zeroed cases are developed, and parameters of these models are validated through sinusoidal sweep tests to provide a basis for establishing an accurate mathematical model for further studies. Then, a simplified control strategy for the EMD system based on the pole assignment control algorithm is proposed. Moreover, ideal pole locations are derived and validated through a series of shaking table tests. Finally, three benchmark earthquake ground motions and sinusoidal sweep waves are imposed onto the structure to investigate the effectiveness and feasibility of using this type of innovative active control system for structural vibration control. In addition, the robustness of the EMD system is examined. The test results show that the EMD system is an effective and robust system for the control of structural vibrations.

Nosocomial infections and their control strategies

Nosocomial infections are also known as hospital-acquired/associated infections. National Healthcare Safety Network along with Centers for Disease Control for surveillance has classified nosocomial infection sites into 13 types with 50 infection sites, which are specific on the basis of biological and clinical criteria. The agents that are usually involved in hospitalacquired infections include Streptococcus spp., Acinetobacter spp., enterococci, Pseudomonas aeruginosa, coagulase-negative staphylococci, Staphylococcus aureus, Bacillus cereus, Legionella and Enterobacteriaceae family members, namely, Proteus mirablis, Klebsiella pneumonia, Escherichia coli, Serratia marcescens. Nosocomial pathogens can be transmitted through person to person, environment or contaminated water and food, infected individuals, contaminated healthcare personnel's skin or contact via shared items and surfaces. Mainly, multi-drug-resistant nosocomial organisms include methicillin-resistant Staphylococcus aureus, vancomycin-resistant enterococci, Pseudomonas aeruginosa and Klebsiella pneumonia, whereas Clostridium difficile shows natural resistance. Excessive and improper use of broadspectrum antibiotics, especially in healthcare settings, is elevating nosocomial infections, which not only becomes a big health care problem but also causes great economic and production loss in the community. Nosocomial infections can be controlled by measuring and comparing the infection rates within healthcare settings and sticking to the best healthcare practices. Centers for Disease Control and Prevention provides the methodology for surveillance of nosocomial infections along with investigation of major outbreaks. By means of this surveillance, hospitals can devise a strategy comprising of infection control practices.

Fuzzy Controller Based 3Phase 4Wire Shunt Active Filter for Mitigation of Current Harmonics with Combined p-q and Id-Iq Control Strategies

As more and more variable frequency drives (VFDs), electronic ballasts, battery chargers, and static Var compensators are installed in facilities, the problems related to harmonics are expected to get worse. As a result Active power filter (APF) gains much more attention due to excellent harmonic compensation. But still the performance of the active filter seems to be in contradictions with different control strategies. This paper presents detailed analysis to compare and elevate the performance of two control strategies for ex-tracting reference currents of shunt active filters under balanced, un-balanced and non-sinusoidal conditions by using Fuzzy controller. The well known methods, instantaneous real active and reactive power method (p-q) and active and reactive current method (id-iq) are two control methods which are extensively used in active filters. Extensive Simulations are carried out with fuzzy controller for both p-q and Id-Iq methods for different voltage conditions and adequate results were presented. Simulation results validate the superior per-formance of active and reactive current control strategy (id-iq) with fuzzy controller over active and reactive power control strategy (p-q) with fuzzy controller.

Application and Analysis of Force Control Strategies to Deburring and Grinding

This paper aims to give an insight into the development and evaluation of force controlled machining processes with a commercially available setup. We will focus on a deburring and a grinding scenario, representing the major applications in today’s robot machining. Whereas the deburring use-case implements a force dependent feed-rate control, the grinding use-case implements an orthogonal force (pressure) control. Both strategies will be evaluated and the influence of general machining and robot specific parameters will be discussed.

Path Planning and Tracking Control for Parking via Soft Actor-Critic Under Non-Ideal Scenarios

Parking in a small parking lot within limited space poses a difficult task. It often leads to deviations between the final parking posture and the target posture. These deviations can lead to partial occupancy of adjacent parking lots, which poses a safety threat to vehicles parked in these parking lots. However, previous studies have not addressed this issue. In this paper, we aim to evaluate the impact of parking deviation of existing vehicles next to the target parking lot(PDEVNTPL) on the automatic ego vehicle(AEV) parking, in terms of safety, comfort, accuracy, and efficiency of parking. A segmented parking training framework(SPTF) based on soft actor-critic(SAC) is proposed to improve parking performance. In the proposed method, the SAC algorithm incorporates strategy entropy into the objective function, to enable the AEV to learn parking strategies based on a more comprehensive understanding of the environment. Additionally, the SPTF simplifies complex parking tasks to maintain the high performance of deep reinforcement learning(DRL). The experimental results reveal that the PDEVNTPL has a detrimental influence on the AEV parking in terms of safety, accuracy, and comfort, leading to reductions of more than 27%, 54%, and 26%respectively. However, the SAC-based SPTF effectively mitigates this impact, resulting in a considerable increase in the parking success rate from 71% to 93%. Furthermore, the heading angle deviation is significantly reduced from 2.25 degrees to 0.43degrees.

Role of laser scan strategies in defect control,microstructural evolution and mechanical properties of steel matrix composites prepared by laser additive manufacturing

Steel matrix composites(SMCs)reinforced with WC particles were fabricated via selective laser melting(SLM)by employing various laser scan strategies.A detailed relationship between the SLM strategies,defect formation,microstructural evolution,and mechanical properties of SMCs was established.The laser scan strategies can be manipulated to deliberately alter the thermal history of SMC during SLM processing.Particularly,the involved thermal cycling,which encompassed multiple layers,strongly affected the processing quality of SMCs.Sshaped scan sequence combined with interlayer offset and orthogonal stagger mode can effectively eliminate the metallurgical defects and retained austenite within the produced SMCs.However,due to large thermal stress,microcracks that were perpendicular to the building direction formed within the SMCs.By employing the checkerboard filling(CBF)hatching mode,the thermal stress arising during SLM can be significantly reduced,thus preventing the evolution of interlayer microcracks.The compressive properties of fabricated SMCs can be tailored at a high compressive strength(~3031.5 MPa)and fracture strain(~24.8%)by adopting the CBF hatching mode combined with the optimized scan sequence and stagger mode.This study demonstrates great feasibility in tuning the mechanical properties of SLM-fabricated SMCs without varying the set energy input,e.g.,laser power and scanning speed.

Refrigerant Control Strategies for Residential Air-Conditioning and Heat-Pump System

This paper simulated the optimal refrigerant charge inventory of a refrigeration system in air-conditioning operation and heat-pump operation respectively,and studied the refrigerant control strategies in this system.The void fraction in two-phase fluid region was calculated by Harms model.And based on distributed parameter model and Harms model,the refrigerant charge inventory in condenser and evaporator were calculated and analyzed in air-conditioning conditions and heat-pump conditions,respectively.The calculating results of different refrigerant mass between refrigeration and heating conditions indicate that the optimal refrigerant charge inventory in heat-pump conditions is lower than that in air-conditioning conditions.To avoid the decrease of COP due to the surplus refrigerant in heating conditions,we introduced the liquid reservoir control method and associate capillary control method.Both of them could increase the heating capacity of the air-source heat pump.The difference of optimal refrigerant charge inventory in air-conditioning and heat-pump system can be controlled by the liquid reservoir or the associate capillary.

The Combination of Two Control Strategies for Series Hybrid Electric Vehicles

With most countries paying attention to the environment protection, hybrid electric vehicles have become a focus of automobile research and development due to the characteristics of energy saving and low emission. Power follower control strategy(PFCS) and DC-link voltage control strategy are two sorts of control strategies for series hybrid electric vehicles(HEVs). Combining those two control strategies is a new idea for control strategy of series hybrid electric vehicles. By tuning essential parameters which are the defined constants under DClink voltage control and under PFCS, the points of minimum mass of equivalent fuel consumption(EFC) corresponding to a series of variables are marked for worldwide harmonized light vehicles test procedure(WLTP). The fuel economy of series HEVs with the combination control schemes performs better compared with individual control scheme. The results show the effects of the combination control schemes for series HEVs driving in an urban environment.

Optimization of operational strategies for rich gas enhanced oil recovery based on a pilot test in the Bakken tight oil reservoir

Horizontal well drilling and multistage hydraulic fracturing have been demonstrated as effective approaches for stimulating oil production in the Bakken tight oil reservoir.However,after multiple years of production,primary oil recovery in the Bakken is generally less than 10%of the estimated original oil in place.Gas huff‘n’puff(HnP)has been tested in the Bakken Formation as an enhanced oil recovery(EOR)method;however,most field pilot test results showed no significant incremental oil production.One of the factors affecting HnP EOR performance is premature gas breakthrough,which is one of the most critical issues observed in the field because of the presence of interwell fractures.Consequently,injected gas rapidly reaches adjacent production wells without contacting reservoir rock and increasing oil recovery.Proper conformance control is therefore needed to avoid early gas breakthrough and improve EOR performance.In this study,a rich gas EOR pilot in the Bakken was carefully analyzed to collect the essential reservoir and operational data.A simulation model with 16 wells was then developed to reproduce the production history and predict the EOR performance with and without conformance control.EOR operational strategies,including single-and multiple-well HnP,with different gas injection constraints were investigated.The simulation results of single-well HnP without conformance control showed that a rich gas injection rate of at least 10 MMscfd was needed to yield meaningful incremental oil production.The strategy of conformance control via water injection could significantly improve oil production in the HnP well,but injecting an excessive amount of water also leads to water breakthrough and loss of oil production in the offset wells.By analyzing the production performance of the wells individually,the arrangement of wells was optimized for multiple-well HnP EOR.The multiwell results showed that rich gas EOR could improve oil production up to 7.4%by employing conformance control strategies.Furthermore,replacing rich gas with propane as the injection gas could result in 14%of incremental oil production.

Instantaneous Active and Reactive Power and Current Strategies for Current harmonics cancellation in 3-ph 4wire SHAF With both PI and Fuzzy Controllers

Control strategies for extracting the three-phase reference currents for shunt active power filters are compared, evaluating their performance under different source conditions with PI and Fuzzy Controllers in MATLAB/Simulink environment When the supply voltages are balanced and sinusoidal, the two control strategies are converge to the same compensation characteristics;However, the supply voltages are distorted and/or un-balanced sinusoidal, these control strategies result in different degrees of compensation in harmonics. The compensation capabilities are not equivalent, with p - q control strategy unable to yield an adequate solution when source voltages are not ideal. Extensive simulations are carried out with PI controller and also with Fuzzy controller for both p-q and Id-Iq control strategies under different main voltages. Extensive Simulations are carried out with PI as well as fuzzy controller for both p-q and Id - Iq control strategies by considering different voltage conditions and adequate results were presented. On owing Id - Iq method with fuzzy logic controller gives away an out-standing performance under any voltage conditions (balanced, un-balanced, balanced and non-sinusoidal).

Structure and Control Strategies of Fuel Cell Vehicle

The structure and kinds of the fuel cell vehicle (FCV) and the mathematical model of the fuel cell processor are discussed in detail. FCV includes many parts: the fuel cell thermal and water management, fuel supply, air supply and distribution, AC motor drive, main and auxiliary power management, and overall vehicle control system. So it requires different kinds of control strategies, such as the PID method, zero-pole method, optimal control method, fuzzy control and neural network control. Along with the progress of control method, the fuel cell vehicle's stability and reliability is up-and-up. Experiment results show FCV has high energy efficiency.

Risk prevention and control strategies for the severely affected areas of snow disaster in the Three Rivers Source Region(TRSR), China

Historically,frequent and heavy snow disaster(SD)has caused serious livestock death and casualties,resulting in a devastating impact on animal husbandry development in the Three Rivers Source Region(TRSR).From winter in 2018 to spring in 2019,the largest SD occurred in this area over the past 10 years,especially in core zones of the Lancang River Source Region.Field research results show that the main causes of the major SD include weak infrastructure(i.e.,roads,communications,warm sheds,and insufficient forage reserve),low rate of domestic animals for sale before the SD,and low loss settlement rate.SD occurrence could furtherly reduce the ability of disaster prevention,mitigation and relief of disaster loss.In the future,heavily affected SD areas should improve the forecasting ability of snowfall incidents,strengthen infrastructure construction,implement grass and livestock balance strategies,optimize livestock structure,improve loss settlement rate,and develop a modern compound model of animal husbandry development model that combines breeding,slaughtering and deep processing of animal product.

Analysis of Different Vibration Control Strategies for Soft Mounted Induction Motors with Sleeve Bearings Using Active Motor Foot Mounts

The paper presents a theoretical analysis of different vibration control strategies of soft mounted induction motors with sleeve bearings, using active motor foot mounts. After the vibration model is presented, different controllers in combination with different feedback strategies are mathematically investigated. The focus is here on the forced vibrations, caused by dynamic rotor eccentricity—rotor mass eccentricity, magnetic eccentricity and bent rotor deflection. After the mathematically coherences are described, a numerical example is shown, where the forced vibrations caused by bent rotor deflection are investigated, for different control strategies, where the mass matrix, the stiffness matrix and the damping matrix are influenced by different control parameters. The aim of the paper is to show the mathematically coherences and the possibility to influence the vibration behaviour, by different control strategies to optimize the vibration behaviour of soft mounted induction motors.

Immune Control Strategies for Vaccinia Virus-related Laboratory-acquired Infections

While presenting biological characteristics of vaccinia virus and laboratory-acquired infections during related research processes, this paper focuses on benefits and risks of vaccinia virus immunization in relation to laboratory-acquired infections, describes characteristics and the adaptation of vaccinia virus vaccine, analyses the role vaccinia virus immunization plays in the prevention and control of laboratory-acquired infections, and finally proposes solutions and countermeasures to further promote and implement immune control strategies. The problem related to immune strategy and laboratory- acquired infections which is being raised, analyzed and explored plays an active and instructive role in vaccinia virus related researches and laboratory- acquired infections, and also helps to recommend and develop relevant immune strategy for future vaccine control of such infections.

The Main Biological Hazards in Animal Biosafety Level 2 Facilities and Strategies for Control

Concern about the biological hazards involved in microbiological research, especially research involving laboratory animals, has increased in recent years. Working in an animal biosafety level 2 facility （ABSL-2）, commonly used for research on infectious diseases, poses various biological hazards. Here, the regulations and standards related to laboratory biosafety in China are introduced, the potential biological hazards present in ABSL-2 facilities are analyzed, and a series of strategies to control the hazards are presented.

Strategies for controlling biofilm formation in food industry

Foodborne pathogen poses a threat to the food industries as many outbreaks have been found to be associated with biofilm formation.The formation of biofilm is a self-protection growth pattern of bacteria,which increases post-processing contamination and risk to public health.It is difficult to eliminate the biofilm in the food industries,since the biofilm cells have a barrier preventing or lessening the contact with environmental stresses,antimicrobial agents and the host immune system.Bacterial biofilm formation is a complex process,including initial attachment stage,irreversible attachment stage,biofilm development stage,biofilm maturation stage,and biofilm dispersion stage.The genetic mechanism,substratum and bacterial cell surface properties involve in the biofilm formation.The biofilm inhibition methods studied are physical treatment,chemical and biochemical treatment.The potential green and safe biochemical method attracts more attention,especially,the novel strategies using the safe biochemical agents(essential oils,enzymes,biosurfactants,others)constantly emerged.The review emphasized on effective strategies for inhibiting biofilm formation in different stages(initial irreversible attachment,formation,and maturation)by use of biochemical agents,aiming to provide new insight into biofilm control in food industry thus improving food quality and safety.

Control of HIV/AIDS can be achieved with multi-strategies

Over past three decades,many prevention strategies have been proven effective in reducing human immunodeficiency virus (HIV) transmission.However,none of these strategies alone are effective to stop the spread of HIV.This review discusses a few key prevention strategies,including testing,harm reduction,prevention,prophylaxis,and modern communication strategies.We argue that although there are great challenges remaining to stop HIV transmission via sexual contact and injecting drug use routes,the combination of these effective strategies,control HIV epidemic can be achieved.