As offshore wind farms expand into deeper and farther ocean regions and the unit capacity of offshore wind turbines(OWTs)increases,there is a pressing need for a new foundation structure that can accommodate deep-sea ...As offshore wind farms expand into deeper and farther ocean regions and the unit capacity of offshore wind turbines(OWTs)increases,there is a pressing need for a new foundation structure that can accommodate deep-sea conditions and support large capacities while maintaining economical and safe.To meet this goal of integrated transportation and one-step installation,a novel five-bucket jacket foundation(FBJF),with its suction installation and leveling methods in sand,has been proposed,analyzed and experimentally studied.First,seepage failure experiments of the FBJF at various depths were conducted,and a formula for calculating the critical suction of seepage failure suitable for the FBJF in sand was chosen and recommended for use with a range of values for the permeability coefficient ratio.Second,through leveling experiments of the FBJF at different depths,the maximum adjustable leveling angle during the sinking process was defined using seepage failure and the adjustable leveling angle of the foundation as control criteria.Various leveling control strategies were proposed and verified.Finally,an automatic sinking and leveling control system for the FBJF was developed and experimentally verified for feasibility.展开更多
In this paper,a numerical investigation of a float-over installation for an offshore platform is presented to verify the feasibility of the actual installation.The hydrodynamic performance of a T-barge is investigated...In this paper,a numerical investigation of a float-over installation for an offshore platform is presented to verify the feasibility of the actual installation.The hydrodynamic performance of a T-barge is investigated in the frequency domain,and the coupled motions are analyzed in the time domain.We then compare with those of the model test and determine that the response amplitude operator and the time series agree quite well.The barge exhibits favorable hydrodynamic behavior in the considered sea state,and the equipment loads are allowable.Themooring systemand sway fender forces are within the permissible range.Based on these results,we can verify that the actual installation of the offshore platform is feasible.We accurately simulated many important factors and effectively reduced the risk associated with the offshore installation,which is of great importance.As such,we demonstrate that the numerical simulation of the float-over installation for offshore platforms has practical engineering significance.展开更多
Flowline bundle system consisting of carrier pipe,sleeve pipe and internal flowlines offers innovative solution for the infield transportation of oil and gas. Due to its features,flowline bundle offers a couple of adv...Flowline bundle system consisting of carrier pipe,sleeve pipe and internal flowlines offers innovative solution for the infield transportation of oil and gas. Due to its features,flowline bundle offers a couple of advantages over conventional flowline in particular for cases where multi-flowlines and high thermal performance is of great interest. The main benefits and advantages of such system include excellent thermal performance to prevent wax formation and hydrates,multiple bundled flowlines,mechanical and corrosion protection,potential reuse, etc. With the developments of offshore oil and gas industries,more and more hydrocarbon resources are being explored and discovered from shallow to deep water. Pipeline bundle system can be a smart solution for certain applications,which can be safe and cost effective solution. The objective of this paper is to overview pipeline bundle technology,outline detailed engineering design issue and procedure. Focus is given to its potential application in offshore for infield transportation. Engineering design principles and procedures for pipeline bundle system are highlighted. Construction methods of flowline bundle onshore are reviewed. Offshore towing and installation of pipeline bundle procedure is outlined.展开更多
Current installation costs of offshore wind turbines(OWTs) are high and profit margins in the offshore wind energy sector are low, it is thus necessary to develop installation methods that are more efficient and pract...Current installation costs of offshore wind turbines(OWTs) are high and profit margins in the offshore wind energy sector are low, it is thus necessary to develop installation methods that are more efficient and practical. This paper presents a numerical study(based on a global response analysis of marine operations) of a novel procedure for installing the tower and Rotor Nacelle Assemblies(RNAs) on bottom-fixed foundations of OWTs. The installation procedure is based on the inverted pendulum principle. A cargo barge is used to transport the OWT assembly in a horizontal position to the site, and a medium-size Heavy Lift Vessel(HLV) is then employed to lift and up-end the OWT assembly using a special upending frame. The main advantage of this novel procedure is that the need for a huge HLV(in terms of lifting height and capacity) is eliminated. This novel method requires that the cargo barge is in the leeward side of the HLV(which can be positioned with the best heading) during the entire installation. This is to benefit from shielding effects of the HLV on the motions of the cargo barge, so the foundations need to be installed with a specific heading based on wave direction statistics of the site and a typical installation season. Following a systematic approach based on numerical simulations of actual operations, potential critical installation activities, corresponding critical events, and limiting(response) parameters are identified. In addition, operational limits for some of the limiting parameters are established in terms of allowable limits of sea states. Following a preliminary assessment of these operational limits, the duration of the entire operation, the equipment used, and weather-and water depth-sensitivity, this novel procedure is demonstrated to be viable.展开更多
A system designed for a rigid and flexible pipe laying purposes is presented in the paper.Mathematical and numerical models are developed by using the rigid finite element method（RFEM）.The RFEM is an efficient solut...A system designed for a rigid and flexible pipe laying purposes is presented in the paper.Mathematical and numerical models are developed by using the rigid finite element method（RFEM）.The RFEM is an efficient solution in the time domain.Static and dynamic problems related to pipe installation are solved by taking the advantage of simple interpretation and implementation of the method.Large deformations of the pipe during spooling and when it is reeled out at sea are considered.A material model implemented is used to take into consideration nonlinear material properties.In particular,the full elasto-plastic material characteristics with hardening and Bauschinger effect are included.Dynamic analyses are performed and the results attached in this work demonstrates how the sea conditions influence the machinery and pipeline,assuming a passive reel drive system. The influence of several other operational parameters on dynamic loads is verified.An active system,implemented as a part of the mathematical model,improves the system performance.Some results are presented as well.展开更多
Some new innovative constructions and piling technologies for improvement of offshore and port berthing structures are worked out and discussed. The aims of innovations are to decrease required power of construction ...Some new innovative constructions and piling technologies for improvement of offshore and port berthing structures are worked out and discussed. The aims of innovations are to decrease required power of construction （in particular, piling） equipment and, correspondingly, to improve environmental situation at the construction site. Another achieved goal is providing long tubular piles installation in hard soils conditions without application of very heavy and powerful driving machines. Worked out solutions are based on two approaches. One of them provides separate loading of driving force on pile＇s shaft and pile＇s tip concentrating the whole driving force on one of the mentioned parts of the pile. Another approach is focused on prevention of soil plug formation inside of the tubular pile tip facilitating the pile installation process. Also improved anchorage system for sheet piling seafront walls is presented and discussed. All considered innovations are patented and can be used in wide range of marine, offshore, coastal and harbor structures.展开更多
The development history of the offshore wind gravity foundation in Europe is briefly introduced.Sumnarized in which the equipment relates to offshore wind power installation,including ships and special equipment relat...The development history of the offshore wind gravity foundation in Europe is briefly introduced.Sumnarized in which the equipment relates to offshore wind power installation,including ships and special equipment related to wind power installation.And the installation method and technology of gravity foundation are analyzed.The development trend of the offshore wind power gravity foundation is put forward.展开更多
基金financially supported by the Open Foundation of State Key Laboratory of Hydraulic Engineering Simulation and Safety of Tianjin University(Grant No.HESS-2002)。
文摘As offshore wind farms expand into deeper and farther ocean regions and the unit capacity of offshore wind turbines(OWTs)increases,there is a pressing need for a new foundation structure that can accommodate deep-sea conditions and support large capacities while maintaining economical and safe.To meet this goal of integrated transportation and one-step installation,a novel five-bucket jacket foundation(FBJF),with its suction installation and leveling methods in sand,has been proposed,analyzed and experimentally studied.First,seepage failure experiments of the FBJF at various depths were conducted,and a formula for calculating the critical suction of seepage failure suitable for the FBJF in sand was chosen and recommended for use with a range of values for the permeability coefficient ratio.Second,through leveling experiments of the FBJF at different depths,the maximum adjustable leveling angle during the sinking process was defined using seepage failure and the adjustable leveling angle of the foundation as control criteria.Various leveling control strategies were proposed and verified.Finally,an automatic sinking and leveling control system for the FBJF was developed and experimentally verified for feasibility.
基金supported by Marine Engineering Equipment Scientific Research Project of Ministry of Industry and Information Technology of PRC and the Application of float-over installation simulation in Wangchang Project of CNOOC Technology ProjectThe Fundamental Research Funds for the Central Universities(HEUCF170102)
文摘In this paper,a numerical investigation of a float-over installation for an offshore platform is presented to verify the feasibility of the actual installation.The hydrodynamic performance of a T-barge is investigated in the frequency domain,and the coupled motions are analyzed in the time domain.We then compare with those of the model test and determine that the response amplitude operator and the time series agree quite well.The barge exhibits favorable hydrodynamic behavior in the considered sea state,and the equipment loads are allowable.Themooring systemand sway fender forces are within the permissible range.Based on these results,we can verify that the actual installation of the offshore platform is feasible.We accurately simulated many important factors and effectively reduced the risk associated with the offshore installation,which is of great importance.As such,we demonstrate that the numerical simulation of the float-over installation for offshore platforms has practical engineering significance.
文摘Flowline bundle system consisting of carrier pipe,sleeve pipe and internal flowlines offers innovative solution for the infield transportation of oil and gas. Due to its features,flowline bundle offers a couple of advantages over conventional flowline in particular for cases where multi-flowlines and high thermal performance is of great interest. The main benefits and advantages of such system include excellent thermal performance to prevent wax formation and hydrates,multiple bundled flowlines,mechanical and corrosion protection,potential reuse, etc. With the developments of offshore oil and gas industries,more and more hydrocarbon resources are being explored and discovered from shallow to deep water. Pipeline bundle system can be a smart solution for certain applications,which can be safe and cost effective solution. The objective of this paper is to overview pipeline bundle technology,outline detailed engineering design issue and procedure. Focus is given to its potential application in offshore for infield transportation. Engineering design principles and procedures for pipeline bundle system are highlighted. Construction methods of flowline bundle onshore are reviewed. Offshore towing and installation of pipeline bundle procedure is outlined.
基金financially supported by the Research Council of Norway granted through the Department of Marine Technologythe Centre for Ships and Ocean Structures(CeSOS) and the the Centre for Autonomous Marine Operations and Systems(AMOS) from the Norwegian University of Science and Technology(NTNU)the financial support from Escuela Politécnica Nacional(EPN)through the project PIMI-15-03"Investigación y evaluación de sistemas innovadores de propulsión distribuida con ingestión de capa límite para mejorar la eficiencia propulsiva y térmica de vehículos aéreos no tripulados aplicados en los sectores:agrícola,medicina y vigilancia"
文摘Current installation costs of offshore wind turbines(OWTs) are high and profit margins in the offshore wind energy sector are low, it is thus necessary to develop installation methods that are more efficient and practical. This paper presents a numerical study(based on a global response analysis of marine operations) of a novel procedure for installing the tower and Rotor Nacelle Assemblies(RNAs) on bottom-fixed foundations of OWTs. The installation procedure is based on the inverted pendulum principle. A cargo barge is used to transport the OWT assembly in a horizontal position to the site, and a medium-size Heavy Lift Vessel(HLV) is then employed to lift and up-end the OWT assembly using a special upending frame. The main advantage of this novel procedure is that the need for a huge HLV(in terms of lifting height and capacity) is eliminated. This novel method requires that the cargo barge is in the leeward side of the HLV(which can be positioned with the best heading) during the entire installation. This is to benefit from shielding effects of the HLV on the motions of the cargo barge, so the foundations need to be installed with a specific heading based on wave direction statistics of the site and a typical installation season. Following a systematic approach based on numerical simulations of actual operations, potential critical installation activities, corresponding critical events, and limiting(response) parameters are identified. In addition, operational limits for some of the limiting parameters are established in terms of allowable limits of sea states. Following a preliminary assessment of these operational limits, the duration of the entire operation, the equipment used, and weather-and water depth-sensitivity, this novel procedure is demonstrated to be viable.
基金supported by the Polish Ministry of Science and Higher Education(N N502 464934)
文摘A system designed for a rigid and flexible pipe laying purposes is presented in the paper.Mathematical and numerical models are developed by using the rigid finite element method（RFEM）.The RFEM is an efficient solution in the time domain.Static and dynamic problems related to pipe installation are solved by taking the advantage of simple interpretation and implementation of the method.Large deformations of the pipe during spooling and when it is reeled out at sea are considered.A material model implemented is used to take into consideration nonlinear material properties.In particular,the full elasto-plastic material characteristics with hardening and Bauschinger effect are included.Dynamic analyses are performed and the results attached in this work demonstrates how the sea conditions influence the machinery and pipeline,assuming a passive reel drive system. The influence of several other operational parameters on dynamic loads is verified.An active system,implemented as a part of the mathematical model,improves the system performance.Some results are presented as well.
文摘Some new innovative constructions and piling technologies for improvement of offshore and port berthing structures are worked out and discussed. The aims of innovations are to decrease required power of construction （in particular, piling） equipment and, correspondingly, to improve environmental situation at the construction site. Another achieved goal is providing long tubular piles installation in hard soils conditions without application of very heavy and powerful driving machines. Worked out solutions are based on two approaches. One of them provides separate loading of driving force on pile＇s shaft and pile＇s tip concentrating the whole driving force on one of the mentioned parts of the pile. Another approach is focused on prevention of soil plug formation inside of the tubular pile tip facilitating the pile installation process. Also improved anchorage system for sheet piling seafront walls is presented and discussed. All considered innovations are patented and can be used in wide range of marine, offshore, coastal and harbor structures.
基金supported by 2019 Science and Technology Project of Qingdao West Coast New Area(2019-8)。
文摘The development history of the offshore wind gravity foundation in Europe is briefly introduced.Sumnarized in which the equipment relates to offshore wind power installation,including ships and special equipment related to wind power installation.And the installation method and technology of gravity foundation are analyzed.The development trend of the offshore wind power gravity foundation is put forward.
