A new kind of Mn Mo Nb Cu B bainite steel which satisfied mechanical demands of E690 offshore plate steel was designed. The effect of two processes thermomechanical control process （TMCP）＋ tempering （T） and therm...A new kind of Mn Mo Nb Cu B bainite steel which satisfied mechanical demands of E690 offshore plate steel was designed. The effect of two processes thermomechanical control process （TMCP）＋ tempering （T） and thermomechanical control process （TMCP） ＋ reheating and quenching （RQ） ＋ tempering （T） on microstructure and mechanical properties were studied by means of scan electron microscope （SEM）, transmission electron micro- scope （TEM） and electron back scatter diffraction （EBSD）. The results showed that optimal mechanical properties were available when tempering at 550 ℃ for both processes. The microstructure of the TMCP＋T treated sample tempering in the range of 450 to 550 ℃ for 1 h did not change dramatically yet the lath in the TMCP＋RQ＋T trea- ted sample merged together and transformed into polygonal ferrite. At the same time, the sub-structure of grain bainite transformed from lath to cell shape to refine grains with tempering temperature mounting. Lots of sub-grain boundaries were located within bainite and adjacent bainite grain boundaries were high angle.展开更多
The six-degree-of-freedom movement of an offshore plate anchor is essential to evaluate anchor performance.As an emerging technology,magnetometer has shown its potential in measuring the six-degree-of-freedom movement...The six-degree-of-freedom movement of an offshore plate anchor is essential to evaluate anchor performance.As an emerging technology,magnetometer has shown its potential in measuring the six-degree-of-freedom movement of offshore anchors under 1-g model laboratory tests.The paper presents the feasibility of adopting a magnetometer system in geotechnical centrifuge testing.Interference factors that may affect the measuring accuracy of the magnetometer system are investigated.The results demonstrate that the magnetometer system can accurately catch the anchor movement in the soils with the restrictions of:(1)the model anchor was made with stainless steel;(2)the system was placed at least 30 cm away from the side wall of soil model tank;(3)started the measurement when the artificial acceleration by centrifuge was stable.展开更多
文摘A new kind of Mn Mo Nb Cu B bainite steel which satisfied mechanical demands of E690 offshore plate steel was designed. The effect of two processes thermomechanical control process （TMCP）＋ tempering （T） and thermomechanical control process （TMCP） ＋ reheating and quenching （RQ） ＋ tempering （T） on microstructure and mechanical properties were studied by means of scan electron microscope （SEM）, transmission electron micro- scope （TEM） and electron back scatter diffraction （EBSD）. The results showed that optimal mechanical properties were available when tempering at 550 ℃ for both processes. The microstructure of the TMCP＋T treated sample tempering in the range of 450 to 550 ℃ for 1 h did not change dramatically yet the lath in the TMCP＋RQ＋T trea- ted sample merged together and transformed into polygonal ferrite. At the same time, the sub-structure of grain bainite transformed from lath to cell shape to refine grains with tempering temperature mounting. Lots of sub-grain boundaries were located within bainite and adjacent bainite grain boundaries were high angle.
基金supported by the National Natural Science Foundation of China(Grant No.51890912).
文摘The six-degree-of-freedom movement of an offshore plate anchor is essential to evaluate anchor performance.As an emerging technology,magnetometer has shown its potential in measuring the six-degree-of-freedom movement of offshore anchors under 1-g model laboratory tests.The paper presents the feasibility of adopting a magnetometer system in geotechnical centrifuge testing.Interference factors that may affect the measuring accuracy of the magnetometer system are investigated.The results demonstrate that the magnetometer system can accurately catch the anchor movement in the soils with the restrictions of:(1)the model anchor was made with stainless steel;(2)the system was placed at least 30 cm away from the side wall of soil model tank;(3)started the measurement when the artificial acceleration by centrifuge was stable.
