Deep-Ensemble Learning Method for Solar Resource Assessment of Complex Terrain Landscapes

As the global demand for renewable energy grows,solar energy is gaining attention as a clean,sustainable energy source.Accurate assessment of solar energy resources is crucial for the siting and design of photovoltaic power plants.This study proposes an integrated deep learning-based photovoltaic resource assessment method.Ensemble learning and deep learning methods are fused for photovoltaic resource assessment for the first time.The proposed method combines the random forest,gated recurrent unit,and long short-term memory to effectively improve the accuracy and reliability of photovoltaic resource assessment.The proposed method has strong adaptability and high accuracy even in the photovoltaic resource assessment of complex terrain and landscape.The experimental results show that the proposed method outperforms the comparison algorithm in all evaluation indexes,indicating that the proposed method has higher accuracy and reliability in photovoltaic resource assessment with improved generalization performance traditional single algorithm.

Research on Representative Engineering Applications of Anemometer Towers Location in Complex TopographyWind Resource Assessment

The typical location and number of anemometer towers in the assessed area are the key to the accuracy of wind resource assessment in complex topography.As calculation examples,this paper used two typical complex topography wind farms in Guangxi,Yunnan province in China.Firstly,we simulated the wind resource status of the anemometer tower in the Meteodyn WT software.Secondly,we compared the simulated wind resource with the actual measured data by the anemometer tower in the same situation.Thirdly,we analyzed the influence of anemometer tower location and quantity in the accuracy of wind resource assessment through the comparison results.The results showed that the range which the anemometer tower can represent is limited(<5 kilometers),and the prediction error more than 5%.Besides,the anemometer towers in special terrain areas(such as wind acceleration areas)cannot be used as a representative choice.The relative error of the simulated average annual wind speed by choose different number of anemometer towers is about 4%,and the grid-connected power generation more than 6%.The representative effect of anemometer towers is of crucial for improving the accuracy of wind resource assessment in engineering applications.

Assessment and Perceived Impact of Coastal Resource Management (CRM) Programs in the Southern Part of Masbate Island, Philippines

Coastal Resource Management (CRM) are activities that achieve sustainable use and management of valuable resources in coastal areas. This study presents the perceived impact of the coastal resource management (CRM) interventions implemented by the Bureau of Fisheries and Aquatic Resources (BFAR) under the FishCORAL Project in the Municipality of Milagros, Masbate. The respondents are members of fisherfolk organizations, Bantay Dagat (BD), and community members. The CRM projects include mangrove planting, the establishment of marine protected area (MPA) markers, the construction of a watchtower, and the establishment of Bantay Dagat (BD). Respondents were convinced that the interventions affected their daily living, especially mangrove planting projects. Members of fisherfolk organizations carried out the project in Barangays Jamorawon, Magsalangi, and Tagbon. In terms of knowledge, attitude, and practices (KAP), these could be attributed to the respondent’s appreciation of the intervention, which contributed to the protection of the area from flood, storm surge, and tsunami, support for livelihood, the presence of marine animals (i.e., shrimp and crabs), and apprehension of illegal fishing activities. Destructive fishing, domestic waste, and natural calamities are some identified causes of aquatic ecosystem destruction. In terms of socioeconomic, respondents are provided additional income ranging from Php 1,500.00 - 2,000.00 per month, and fish stocks have also increased. The distribution of fishnets and Banca, livelihood, protection of marine resources, and commitment of legal authorities to enforce related fishery policies are among the CRM activities with a sound impact on the community.

Defining Cities by Water: Addressing Capital Misallocation in a Race to Conserve Resources

As part of its efforts to promote a sustainable and high-quality development,China has pledged to reduce water consumption and create a water-efficient society.On the basis of identifying the institutional root causes of excessive capital allocation and excessive water consumption in China’s water-intensive industrial sectors,this study elaborates how the national water-efficient cities assessment contributes to optimized capital allocation.Our research shows that national water-efficient cities assessment has motivated local governments to compete for water efficiency.To conserve water,local governments regulated the entry and exit of water-intensive enterprises,discouraged excessive investments in water-intensive sectors,and phased out obsolete water-intensive capacities within their jurisdictions.This approach has resulted in mutually beneficial outcomes,including improved allocation of capital,enhanced water efficiency,and reduced emissions.This paper offers policy recommendations for establishing a water-efficient society throughout the 14^(th) Five-Year Plan(2021-2025)period by presenting empirical evidence on the policy effects of resource efficiency evaluation.

An Analysis of Supply Chain Environment in Great Wall Motor Based on Life-Cycle Assessment

Great Wall Motor(GWM),a leading automotive manufacturer,places a strong emphasis on environmental sustainability and social responsibility.The company focuses on comprehensively evaluating and enhancing its supply chain to align with these objectives.This evaluation spans the entire product life cycle,encompassing design,manufacturing,packaging,distribution,usage,and recycling and disposal processes.Key areas of focus include optimizing raw material selection,improving product recyclability,reducing energy consumption and waste emissions,and minimizing carbon emissions during transportation.Through these endeavors,GWM not only enhances its environmental performance by reducing carbon emissions and resource consumption but also bolsters its brand image and competitiveness in the market.GWM’s dedication to environmental innovation and technological leadership serves as a driving force behind sustainable development and social responsibility within the industry.

Heavy Oil and Oil Sands:Global Distribution and Resource Assessment

Global recoverable resources of heavy oil and oil sands have been assessed by CNPC using a geology-based assessment method combined with the traditional volumetric method, spatial interpolation method, parametric-probability method etc. The most favourable areas for exploration have been selected in accordance with a comprehensive scoring system. The results show:(1) For geological resources, CNPC estimate 991.18 billion tonnes of heavy oil and 501.26 billion tonnes of oil sands globally, of which technically recoverable resources of heavy oil and oil sands comprise 126.74 billion tonnes and 64.13 billion tonnes respectively. More than 80% of the resources occur within Tertiary and Cretaceous reservoirs distributed across 69 heavy oil basins and 32 oil sands basins. 99% of recoverable resources of heavy oil and oil sands occur within foreland basins, passive continental-margin basins and cratonic basins.(2) Since residual hydrocarbon resources remain following large-scale hydrocarbon migration and destruction, heavy oil and oil sands are characterized most commonly by late hydrocarbon accumulation, the same basin types and source-reservoir conditions as for conventional hydrocarbon resources, shallow burial depth and stratabound reservoirs.(3) Three accumulation models are recognised, depending on basin type: degradation along slope; destruction by uplift; and migration along faults.(4) In addition to mature exploration regions such as Canada and Venezuela, the Volga-Ural Basin and the Pre-Caspian Basin are less well-explored and have good potential for oil-sand discoveries, and it is predicted that the Middle East will be an important region for heavy oil development.

The Assessment and Utilization of Straw Resources in China

The study was undertaken to evaluate the collectable and usable volume of existing straw resources, its suitability for different ways of utilization and fully reorganization of its development potential in China. Based on the results on the stubble heights of major crops in the Huang-Huai-Hai area （the area along the Yellow River, Huai River, and Hai River）, the evaluation of the collectable and usable coefficients, and the collectable and usable volumes of various straw resources in China were worked out during 2005. The respective collectable and usable volumes of straw resources were worked out on the basis of suitability as fuel, feed, fertilizer, and base material for edible mushrooms. The total collectable and utilizable quantity of straw in China was 685 950 000 t, and the mean collection coefficient was 0.81 during 2005. The quantity of straw residue and wasted straw accounted for 19%. The collectable and utilizable quantities of grain, cash crop, and other crop straw were 492 310 000, 162 610 000, and 31 030 000 t which accounted for 71.77, 23.71, and 4.52%, respectively of the total collectable and utilizable quantity of straw. The quantity of straw which could be used as fuel was 635 000 000 t, which accounted for 92.63% of total quantity of the straw in the country during 2005. Among the total quantity of collectable and utilizable straw in China during 2005, the quantities of straw suitable and unsuitable for being processed as feedstuff were 587 640 000 and 98 310 000 t, which accounted for 85.67 and 14.33%, respectively. The quantity of straw residue returned to the field and collectable and utilizable straw for direct field restoration was 616 000 000 t, which accounted for about three-fourths of the total straw yield, while the quantity of straw for cultivation of edible mushrooms and industrial processing was about 587 000 000 t, which accounted for more than 85% of the total collectable and utilizable straw. The evaluation results indicate that the collectable and utilizable quantity of straw in China is abundant and suitable for many purposes.

A wave energy resource assessment in the China's seas based on multi-satellite merged radar altimeter data

Wave energy resources are abundant in both offshore and nearshore areas of the China＇s seas. A reliable assessment of the wave energy resources must be performed before they can be exploited. First, for a water depth in offshore waters of China, a parameterized wave power density model that considers the effects of the water depth is introduced to improve the calculating accuracy of the wave power density. Second, wave heights and wind speeds on the surface of the China＇s seas are retrieved from an AVISO multi-satellite altim-eter data set for the period from 2009 to 2013. Three mean wave period inversion models are developed and used to calculate the wave energy period. Third, a practical application value for developing the wave energy is analyzed based on buoy data. Finally, the wave power density is then calculated using the wave field data. Using the distribution of wave power density, the energy level frequency, the time variability indexes, the to-tal wave energy and the distribution of total wave energy density according to a wave state, the offshore wave energy in the China＇s seas is assessed. The results show that the areas of abundant and stable wave energy are primarily located in the north-central part of the South China Sea, the Luzon Strait, southeast of Taiwan in the China＇s seas; the wave power density values in these areas are approximately 14.0–18.5 kW/m. The wave energy in the China’s seas presents obvious seasonal variations and optimal seasons for a wave energy utilization are in winter and autumn. Except for very coastal waters, in other sea areas in the China＇s seas, the energy is primarily from the wave state with 0.5 m≤Hs≤4 m, 4 s≤Te≤10 s whereHs is a significant wave height andTe is an energy period; within this wave state, the wave energy accounts for 80% above of the total wave energy. This characteristic is advantageous to designing wave energy convertors （WECs）. The practical application value of the wave energy is higher which can be as an effective supplement for an energy con-sumption in some areas. The above results are consistent with the wave model which indicates fully that this new microwave remote sensing method altimeter is effective and feasible for the wave energy assessment.

Recommending the IHACRES model for water resources assessment and resolving water conflicts in Africa

The International Association of Hydrological Sciences （IAHS） recognized the lack of hydro- logical data as a world-wide problem in 2002 and adopted the Prediction of Ungauged Basins （PUB） as a decadal research agenda during the period of 2003 to 2012. One of the objectives is to further develop methodologies for prediction in ungauged basins and to reduce uncertainties in model prediction. Estimation of stream flows is required for flood control, water quality control, valley habitat assessment and water budget of a country. However, the majority of water catchments, streams and valleys are ungauged in most developing countries. The main objective of this paper is to introduce the IHACRES （Identification of Hy- drographs and Components from Rainfall, Evaporation and Stream） model into African hydrological plan- ning as a methodology for water resources assessment, which in turn can be used to resolve water conflicts between communities and countries and to study the climate change issues. This is because the IHACRES model is applied for the estimation of flows in ungauged catchments whose physical catchments descriptors （PCDs） can be determined by driving variables （i.e. rainfall and temperature）; and also in gauged streams but whose gauging stations are no longer operational but historical data are available for model calibration. The model provides a valuable insight into the hydrologic behaviour of the upper water sources for valleys as well as provides a useful methodology for water resources assessment in situations of scarce financial resources in developing countries. In addition, it requires relatively few parameters in its calibration and has been successful applied in previous regionalization studies. It will also make possible the equitable distri- bution of water resources in international basins and rivers＇ catchments. This paper does not apply the model anywhere, but recommends it as a methodology for water resources assessment in order to cure water conflicts on the African continent.

Metallic Mineral Resources Assessment and Analysis System Design

This paper presents the aim and the design structure of the metallic mineral resources assessment and analysis system. This system adopts an integrated technique of data warehouse composed of affairs processing layer and analysis application layer. The affairs processing layer includes multiform databases (such as geological database, geophysical database, geochemical database), while the analysis application layer includes data warehouse, online analysis processing and data mining. This paper also presents in detail the data warehouse of the present system and the appropriate spatial analysis methods and models. Finally, this paper presents the prospect of the system.

Discussion on the Assessment Method of Wind Energy Resources by Using Regional Meteorological Data

The exploitation status of wind energy resources was analyzed, and the distribution of wind energy resources and regional meteorological stations were introduced, and then the assessment method of wind energy resources by using data from regional meteorological station was studied taking Huangjin Regional Meteorological Station in Xinning County in Hunan Province for example, besides, corresponding software was compiled. By means of SQL database and program, the method was used simply and easily and had positive meaning for the development of wind energy resources and excavation of wind farm in inland region.

A Concise Overview on Solar Resource Assessment and Forecasting

China’s recently announced directive on tackling climate change,namely,to reach carbon peak by 2030 and to achieve carbon neutrality by 2060,has led to an unprecedented nationwide response among the academia and industry.Under such a directive,a rapid increase in the grid penetration rate of solar in the near future can be fully anticipated.Although solar radiation is an atmospheric process,its utilization,as to produce electricity,has hitherto been handled by engineers.In that,it is thought important to bridge the two fields,atmospheric sciences and solar engineering,for the common good of carbon neutrality.In thisüberreview,all major aspects pertaining to solar resource assessment and forecasting are discussed in brief.Given the size of the topic at hand,instead of presenting technical details,which would be overly lengthy and repetitive,the overarching goal of this review is to comprehensively compile a catalog of some recent,and some not so recent,review papers,so that the interested readers can explore the details on their own.

Reservoir Porosity Measurement Uncertainty and its Influence on Shale Gas Resource Assessment

Reservoir porosity is a critical parameter for the process of unconventional oil and gas resources assessment. It is difficult to determine the porosity of a gas shale reservoir, and any large deviation will directly reduce the credibility of any shale gas resources evaluation. However, there is no quantitative explanation for the accuracy of porosity measurement. In this paper, measurement uncertainty, an internationally recognized index, was used to evaluate the results of porosity measurement of gas shale plugs, and its impact on the credibility of shale gas resources assessment was determined. The following conclusions are drawn:(1) the measurement uncertainty of porosity of a shale plug is 1.76%–3.12% using current measurement methods, the upper end of which is too large to be acceptable. It is suggested that the measurement uncertainty should be factored into the standard helium gas injection porosity determination experiment, and the uncertainty should be less than 2.00% when using a high-precision pressure gauge;(2) in order to reduce the risk for exploration and decision-making, attention should be paid to the large uncertainty(30% at least) of shale gas resource assessment results, sometimes with corrections being made based on the practical considerations;(3) a pressure gauge with an accuracy of 0.25% of the full scal cannot meet the requirements of porosity measurement, and a high-precision plug cutting method or high-precision bulk volume measurement method such as one using 3 D scanning, is recommended to effectively reduce porosity uncertainty;(4) the method and process for evaluating the measurement uncertainty of gas shale porosity could also be referred for assessment of experimental quality by other laboratories.

Monte-Carlo Method for Coalbed Methane Resource Assessment in Key Coal Mining Areas of China

Monte-Carlo method is used for estimating coalbed methane （CBM） resources in key coal mining areas of China. Monte-Carlo method is shown to be superior to the traditional volumetric method with constant parameters in the calculation of CBM resources. The focus of the article is to introduce the main algorithm and the realization of functions estimated by Monte-Carlo method, including selection of parameters, determination of distribution function, generation of pseudo-random numbers, and evaluation of the parameters corresponding to pseudo-random numbers. A specified software on the basis of Monte-Carlo method is developed using Visual C＋＋ for the assessment of the CBM resources. A case study shows that calculation results using Monte-Carlo method have smaller error range in comparison with those using volumetric method.

Comprehensive Assessment of Regional Circular Economy Development Based on Efficiency of Resource & Environment: A Case Study of Jiangsu Province

In the first, the paper gave a retrospective analysis on the comprehensive assessment of circular economic development. According to the requirement of improving resource & environment efficiency, the paper designed an analytical framework for a comprehensive assessment of regional circular economic growth, which consists of the goal, object and technical line of the comprehensive assessment of regional circular economic development. Given that, the paper discussed the criterion for choosing the assessment index, the approaches of index's weighing determination, the means of data standardization, and the reference system of assessment index value and so on. According to the framework of regional circular economic development evaluation, die paper made a comprehensive evaluation of Jiangsu Province's circular economic development. The result shows that from temporal change, Jiangsu Province's circular economic development had different stages; from the spatial comparison, there is variance among different regions, which could be divided into different types according to the spatial variance and the relation between the development of circular economy and the aggregative index number. There was a remarkable correlation between circular economic development level and GDP or the 2nd industry GDP.Finally, the paper gives some suggestions on how to promote the development of circular economy in Jiangsu Province.

Methods for mineral resources assessment based on GIS in Gejiu

Gejiu Tin District is an old mine with a long exploitation history, but its resource is nearly used up at present. The research in mineral resources assessment based on GIS plays a more important and particular role in development of Gejiu. Now mineral resources assessment has been guided by new theories. It makes full use of a large information data of geology, geophysics, geochemistry and remote sensing, which are obtained from current geology exploration, in order to carry out integration mineral analysis, assessment, and to research into the data farther in high levels. At present, the processing of data by computer technique has become more powerful, because GIS was developed in recent years. Particularly, GIS has opened up vast prospects for integrated processing of geoscience data and prognosis of ore resources. GIS can analyze, extract mineral information, quantitatively assess mineral resources, delineate tractes, construct variables, carry out prospecting targets selection and so on.

Assessment and utilization of soil water resources

Based on the analyses of water interactions and water balance, this paper discusses the issues on the assessment and regulation of soil water resources, which lays the scientific basis for limited irrigation and water-saving agriculture.

The Agricultural Assessment of Climatic Resource and Modeling in Jianghan Plain-Lake District

The feature of the climatic resource and the agricultural assessment in Jianghan plain lake district are discussed. In order to exploit the climatic resource, we have recommended some three dimensional agriculture development models in this region according to the types of land use, such as paddy field ecological zone, dry land ecological zone, outskirts ecological zone of the city, waterbody ecological zone, woodland ecological zone.

A Model of Indicators and GIS Maps for the Assessment of Water Resources

The main intention of the study is to identify appropriate indicator to create a model that represents water resource status for a specific system boundary. The report will assess the different scientific approaches associated with water resource engineering, and compare these approaches with respect to human value. The report will focus on the relationship between ecosystem structure and socio technical structure. Ecosystem deals with plants and living things in specific area and the interaction between them, socio technical system deals with the aspects of people, and society as well as technical aspects of organizational structure with respect to the effect on the environment. Ecosystem directly or indirectly affects the society. At the same time, the socio technical system has an impact on ecosystem services in the perspective of consumption and exploitation of recourses. Finally the two systems are dependent on each other. By the application of scientific tools such as Life Cycle Assessment (LCA), Environmental Impact Assessment (EIA), Environmental Risk Assessment (ERA), Performance Indicator (PI), Drivers Pressure State Impact Response (DPSIR), Mellenium Ecosystem Assessment (MEA), etc., some appropriate indicators can be identified corresponding to each approach. LCA focuses on socio-technical aspects whereas DPSIR is environmentally biased. Environmental impact assessment covers both aspects of the system. A matrix combines these methods with the corresponding keywords, and supports in generating a new general model by considering the most weighted indicators. Since each scientific model focuses on some specific aspects, the newly proposed model will give a general view of water environment status. A final comparison is made to recognize relative bias of the newly proposed model with respect to DPSIR model to assess water environment status of the concerning region.

A Review of Mineral Resources and GIS Applications in Mineral Resource Assessment in Northeast China

Northeast China is one of the regions in China that possesses a great abundance of mineral resources. Coal. petroleum, natural gas, gold, iron, magnesite, graphite, talc, molding sand, glass sand and some others account for large portion in reserves and yields of that in the whole country. The region faced also shortages of copper, molybdenum, oil shale, zirconium, tantalum, rare earth, and beryllium, although they have large reserves, but limited by economical and technical factors. Geological mapping and mineral exploration activities have been intensive. Only the north part of Daxinanling Mountains in the region leaves unexplored. GIS applications in mineral resource assessment in the region start not long. Databases for GIS applications are on the way of construction. Well - trained technical staff and expertise do not meet the demand. This article reviews the situation of mineral resources and GIS applications for mineral resource assessment in the region. Suggestions on multi - lateral cooperation and GIS training are also made.