Oil charging history and pathways of the Ordovician carbonate reservoir in the Tuoputai region,Tarim Basin,NW China

Geochemical analysis of 64 oils sampled from an Ordovician carbonate reservoir in the Tuoputai region was undertaken to study the composition of molecular markers. All the oils have similar geochemical characteristics and belong to a single oil family. They are presumed to derive from the same source kitchen and have similar oil charging history. A histogram of homogenization temperatures(Th) of aqueous inclusions in reservoir rocks shows a bimodal distribution pattern, indicating that the Ordovician reservoir has been charged twice. Coupling the measured Th(°C) with the burial and geothermal histories reconstructed using 1D basin modeling, we relate the homogenization temperature to the relevant geological ages: i.e.,425–412 and 9–4 Ma, corresponding to the Middle to Late Silurian and the Miocene to Pliocene, respectively. The oil filling orientation and pathways are traced using molecular indicators related to alkyldibenzothiophenes and benzo[b]naphthothiophenes. The oil charging orientation is from south to north generally. It can be predicted that the Ordovician reservoirs were sourced from a kitchen located to the south of the Tuoputai region, most probably between the Awati and Manjiaer Depressions. Traps located in the southern side of the Tuoputai region, along the oil charging pathways, should therefore be preferred oil exploration targets.

A static resistance model and the discontinuous pattern of hydrocarbon accumulation in tight oil reservoirs

In exploration for tight oil, the content and saturation of hydrocarbon in the tight reservoir is a key factor for evaluating the reserve. Therefore, it is necessary to study the geological history of hydrocarbon accumulation and the tight oil charging process. However, kinetic models used for petroleum development are not applicable for petroleum exploration. In this study, a static resistance model[ is proposed after analyzing resistances in ultra-slow flow in porous media. Using this model, the disco^atinuous pattern of oil charging is reproduced through incompressible Navier-Stokes equations, the phase field method and the finite element method. This study also explains macroscopic percolation behavior with microscopic flow mechanisms and discusses some issues in ultra-slow flow in a micro/nano pore-throat network. The resistance analysis reveals that capillary resistance and dissipation resistance are dominant factors in the mechanism of oil accumulation in tight reservoirs. Numerical simulations show that pressure thresholds exist and result in discontinuous oil charging. Generally, it is proven that the static model is more applicable than kinetic models in describing oil accumulation in tight reservoirs.

Oil accumulation related to migration of source kitchens in the Lukeqin structural belt, Turpan-Hami Basin, China

The Lukeqin structural belt is the main heavy oil accumulation zone in the Turpan-Hami Basin. The recent discovery of light oil in the Triassic indicates that there may be multiple source kitchens contributing to the oil accumulation. According to oil geochemical analysis and oil-source correlation, the oil in deep and shallow reservoirs of the Lukeqin Oilfield presents different physical and saturated hydrocarbon mass spectrum characteristics. The Triassic heavy oil is from the northern Upper Permian lacustrine source rocks, and the light oil represented by the Yudong-9 Well is from the northwestern Lower Jurassic coal-measure source rocks. The timing of oil charging was determined by K/Ar isotope dating, reservoir fluid inclusion analysis and the evolution history of different source rocks. In summary, the accumulation process consists of two stages. From the end of Triassic to early Jurassic, the northern Permian source kitchen generated a considerable amount of oil, which was finally degraded to heavy oil, migrated to the south and then accumulated. The northwestern Jurassic coal-measure source kitchen began to generate oil at the end of Cretaceous, while the northern source kitchen could only generate a little hydrocarbon. The heavy oil and the light oil have different source rock locations, migration directions and accumulation times. The migration of hydrocarbon source kitchens affects the distribution of heavy oil and light oil reservoirs at the present time.

Diagenetic evolution and effects on reservoir development of the Dengying and Longwangmiao formations,Central Sichuan Basin,Southwestern China

The deeply buried Lower Cambrian Longwangmiao Formation and Upper Ediacaran Dengying Formation from the Sichuan Basin,China,have a total natural gas reserve up to 3×10^(12)m^(3).The complex diagenetic evolution and their impacts on the present-day reservoir quality have not been systematically elucidated,hampering the current exploration.Crucially,the integration and comparation diagenetic study on these two formations,which may be able to shed new lights on reservoir formation mechanism,are yet to be systemically evaluated.By compiling geochemistry data,including carbonate U-Pb ages and petrophysics data,coupled with new petrology,trace elements,and strontium isotope data,of various types of diagenetic carbonates,this study aims to decipher the potential links between diagenesis and reservoir development of both formations.Intriguingly,similar diagenetic sequence,which contains five distinctive dolomite phases,is established in both formations.The matrix dolomite(D1)and early dolomite cement(D2)were likely formed by reflux dolomitization,as inferred by their nearly syn-depositional U-Pb ages and elevatedδ^(18)O caused by seawater evaporation.The subsequent moderate burial dolomite cement(D3)was most plausibly the product of burial compaction as indicated by its lighterδ^(18)O and slightly younger U-Pb ages compared with D1 and D2.Whereas deep burial dolomite cements(D4 and D5)yield markedly depletedδ^(18)O,elevated ^(87)Sr/^(86)Sr,along with much younger U-Pb ages and higher precipitation temperatures,suggesting that they were likely linked to hydrothermal fluids.Despite the wide occurrence of meteoric and organic acids leaching and thermochemical sulfate reduction,they may have only played a subsidiary role on these reservoirs development.Instead,superior reservoir quality is tightly linked to tectonics as inferred by higher reservoir quality closely related to the well-developed fractures and faults filled with abundant hydrothermal minerals.Notably,good reservoirs in both formations are mainly attributed to high permeability caused by tectonics.Hence,this new contribution emphasizes the crucial role of tectonics on spatially explicit reservoir prediction of deep to ultra-deep(up to>8000 m)carbonates in the Sichuan Basin,as well as other sedimentary basin analogues in China.

Forming mechanism of hydrocarbon reservoirs in Yingshan Formation of Yuqi block in Akekule arch,Tarim Basin

The reservoir conditions,oil and gas charge history and accumulation phases were studied for Yingshan Formation of Yuqi block,and an oil and gas accumulation model was established by using the techniques of reservoir prediction,fluorescence thin section and fluid inclusion analysis under the guidance of the theories of oil and gas accumulation.The results indicate that the main rock types in Yingshan Formation are micrite and calcarenite.The carbonate reservoirs are of cave,fracture-pore and fracture types,and their physical properties are intermediate;there are at least four oil/gas charges,i.e.late Hercynian,Yanshanian,early Himalayan and middle Himalayan(Cenozoic).The most important charge periods are late Hercynian,early Himalayan and middle Himalayan;the oil and gas accumulation model is self source-lateral expulsion of hydrocarbon-multistage accumulation,or hydrocarbon sourced from and preserved in the same old rocks-long term expulsion of hydrocarbon-multistage accumulation.

Fracture development and hydrocarbon accumulation in tight sandstone reservoirs of the Paleogene Huagang Formation in the central reversal tectonic belt of the Xihu Sag, East China Sea

By using thin section identification, cathodoluminescence, major and trace elements and fluid inclusion tests and authigenic illite dating, based on observation of core cracks, combined with the microscopic characteristics and imaging logging characteristics of fractures, the stages of the fractures in the Huagang Formation of the central reversal tectonic belt of the Xihu Sag in the East China Sea, and the matching relationship between the fracture development stages and the oil and gas charging stages are clarified. There are diagenetic fractures and tectonic fractures in the reservoirs of the Huagang Formation in the study area. The diagenetic fractures developed during the diagenetic stage of the reservoirs and have less effect on oil and gas migration and transport. The tectonic fractures are divided into three stages based on tectonic movements controlling the fractures and their relationships with hydrocarbon charging: The first stage of fractures was generated in the early stage of the Himalayan Movement–Longjing Movement(12–13 Ma ago), when the tectonic stress caused the sutures and shale strips to twist, deform, and break. Tectonic microfractures generated in this period had short extension, narrow width, and poor effectiveness, and had little effect on oil and gas migration and transport. The second stage of fractures came up during the middle-late period of Himalayan Movement–Longjing Movement(9–12 Ma ago), when tectonic movements caused the development of tectonic fractures in the central reversal tectonic belt, these fractures are of large scale, long extension, and good effectiveness, and matched with the first stage of large scale oil and gas charging(9–12 Ma ago), so they play an important role in oil and gas migration, transportation, and accumulation. The third stage of fractures were created from Himalayan Movement–Okinawa Trough movement to the present day(0–3 Ma ago), the fractures are tectonic ones developing successively;matching with the second stage(0–3 Ma ago) of large-scale oil and gas charging, they created conditions for continuous natural gas migration and transportation. All these prove that the development of reservoir fractures in the Huagang Formation of Xihu Sag can provide seepage space and continuous and effective channels for efficient migration and accumulation of oil and gas.

Hydrocarbon accumulation conditions and key exploration and development technologies for PL 19-3 oilfield

The PL 19e3 Oilfield is the only super-large monolithic oilfield with oil and gas reserves up to 1×10^(9) t in the Bohai Bay Basin,and it has been successfully developed.Exploration and development practices have provided abundant data for analyzing formation conditions of this super-large oilfield.On the basis of the exploration and development history,fundamental reservoir features,and with available geological,geophysical and test data,the hydrocarbon accumulation conditions and key exploration&development technologies of the PL 19e3 Oilfield were discussed.The key conditions for forming the super-large Neogene oilfield include four aspects.Firstly,the oilfield is located at the high position of the uplift that contacts the brachy-axis of the multi-ridge slope in the biggest hydrocarbon-rich sag in the Bohai Bay Basin,thus it has sufficient hydrocarbon source and extremely superior hydrocarbon migration condition.Secondly,the large-scale torsional anticlines which formed in the Neogene under the control of the Tanlu strike-slipping movement provide sufficient storage spaces for oil and gas preservation.Thirdly,the“multiple sets of composite reservoir-caprock assemblages”developing in the special shallow-water delta further contributes greatly to the effective storage space for oil and gas preservation.Fourthly,due to the coupling of the uplift and strike slip in the neotectonic period,extensive faulting activities constantly released the pressure while the late period massive hydrocarbon expulsion of the Bozhong took place at the same time,which assures the constant and intense charging of oil and gas.The super-large PL 19e3 Oilfield was controlled by the coupling effects of all those special geologic factors.In view of this oilfield's features(e.g.violently reformation caused by strike slip,and the special sedimentary environment of shallow-water delta),some key practical technologies for exploration and development have been developed.Such technologies include:the special prestack depth migration processing for gas cloud zones,the prediction of thin interbed reservoirs based on high-precision inversion of geologic model,the reservoir description for the shallow-water braided river delta,the quantitative description for remaining oil in the commingled oil reservoirs with wide well spacing and long well interval,and the well pattern adjustment for formations during high water cut period in the complex fluvial-facies oilfields.