Stress corrosion cracking behavior of buried oil and gas pipeline steel under the coexistence of magnetic field and sulfate-reducing bacteria

Magnetic field and microorganisms are important factors influencing the stress corrosion cracking(SCC)of buried oil and gas pipelines. Once SCC occurs in buried pipelines, it will cause serious hazards to the soil environment. The SCC behavior of X80 pipeline steel under the magnetic field and sulfate-reducing bacteria(SRB) environment was investigated by immersion tests, electrochemical tests, and slow strain rate tensile(SSRT) tests. The results showed that the corrosion and SCC sensitivity of X80 steel decreased with increasing the magnetic field strength in the sterile environment. The SCC sensitivity was higher in the biotic environment inoculated with SRB, but it also decreased with increasing magnetic field strength, which was due to the magnetic field reduces microbial activity and promotes the formation of dense film layer. This work provided theoretical guidance on the prevention of SCC in pipeline steel under magnetic field and SRB coexistence.

Prediction on Failure Pressure of Pipeline Containing Corrosion Defects Based on ISSA-BPNNModel

Oil and gas pipelines are affected by many factors,such as pipe wall thinning and pipeline rupture.Accurate prediction of failure pressure of oil and gas pipelines can provide technical support for pipeline safety management.Aiming at the shortcomings of the BP Neural Network(BPNN)model,such as low learning efficiency,sensitivity to initial weights,and easy falling into a local optimal state,an Improved Sparrow Search Algorithm(ISSA)is adopted to optimize the initial weights and thresholds of BPNN,and an ISSA-BPNN failure pressure prediction model for corroded pipelines is established.Taking 61 sets of pipelines blasting test data as an example,the prediction model was built and predicted by MATLAB software,and compared with the BPNN model,GA-BPNN model,and SSA-BPNN model.The results show that the MAPE of the ISSA-BPNN model is 3.4177%,and the R2 is 0.9880,both of which are superior to its comparison model.Using the ISSA-BPNN model has high prediction accuracy and stability,and can provide support for pipeline inspection and maintenance.

Improved AHP–TOPSIS model for the comprehensive risk evaluation of oil and gas pipelines

A comprehensive and objective risk evaluation model of oil and gas pipelines based on an improved analytic hierarchy process(AHP)and technique for order preference by similarity to an ideal solution(TOPSIS)is established to identify potential hazards in time.First,a barrier model and fault tree analysis are used to establish an index system for oil and gas pipeline risk evaluation on the basis of five important factors:corrosion,external interference,material/construction,natural disasters,and function and operation.Next,the index weight for oil and gas pipeline risk evaluation is computed by applying the improved AHP based on the five-scale method.Then,the TOPSIS of a multi-attribute decision-making theory is studied.The method for determining positive/negative ideal solutions and the normalized equation for benefit/cost indexes is improved to render TOPSIS applicable for the comprehensive risk evaluation of pipelines.The closeness coefficient of oil and gas pipelines is calculated by applying the improved TOPSIS.Finally,the weight and the closeness coefficient are combined to determine the risk level of pipelines.Empirical research using a long-distance pipeline as an example is conducted,and adjustment factors are used to verify the model.Results show that the risk evaluation model of oil and gas pipelines based on the improved AHP–TOPSIS is valuable and feasible.The model comprehensively considers the risk factors of oil and gas pipelines and provides comprehensive,rational,and scientific evaluation results.It represents a new decision-making method for systems engineering in pipeline enterprises and provides a comprehensive understanding of the safety status of oil and gas pipelines.The new system engineering decision-making method is important for preventing oil and gas pipeline accidents.

MECHANICAL PROPERTIES OF LONGITUDINAL SUBMERGED ARC WELDED STEEL PIPES USED FOR GAS PIPELINE OF OFFSHORE OIL

Since the development of offshore oil and gas, increased submarine oil and gas pipelines were installed. All the early steel pipes of submarine pipelines depended on importing because of the strict requirements of comprehensive properties, such as, anti-corrosion, resistance to pressure and so on. To research and develop domes- tic steel pipes used for the submarine pipeline, the Longitudinal-seam Submerged Arc Welded （LSAW） pipes were made of steel plates cut from leveled hot rolled coils by both the JCOE and UOE （the forming process in which the plate like the letter “J”, “C”, “0” or “U” shape, then expansion） forming processes. Furthermore, the mechanical properties of the pipe base metal and weld metal were tested, and the results were in accordance with the corresponding pipe specification API SPEC 5L or DNV- OS-FI01, which showed that domestic LSAW pipes could be used for submarine oil and gas pipelines.

Dynamical Mechanisms of Effects of Landslides on Long Distance Oil and Gas Pipelines

According to the investigations on the oil and gas pipelines such as the Lan-Cheng-Chong pipeline and the Southwest pipeline, there are two ways of laying pipeline： pipelines paralleling （approximately） to the main slide direction and pipelines perpendicular （approximately） to the main slide direction. If earth-retaining walls have been built for pipelines paralleling to the main slide direction, they will prevent the lands from sliding; On the contrary, without earth-retaining walls, the sharp broken rocks in the backfilling soil will scratch the safeguard of the pipeline when the landslides take place. Pipelines perpendicular to the main slide direction can be classified into four types according to the relative positions between pipelines and landslides： Pipelines over the slide planes, pipelines inside the fracture strips of slide planes, pipelines below the slide planes and pipelines behind the backsides of landslides. The different dynamical mechanisms of the process in which landslide acts against pipelines are analyzed based on whether the pipelines are equipped with fixed frusta, because the sliding resistance depends on whether and how many fixed frusta are equipped and the distance between frusta.

State of art of seismic design and seismic hazard analysis for oil and gas pipeline system

The purpose of this paper is to adopt the uniform confidence method in both water pipeline design and oil-gas pipeline design.Based on the importance of pipeline and consequence of its failure,oil and gas pipeline can be classified into three pipe classes,with exceeding probabilities over 50 years of 2%,5% and 10%,respectively.Performance-based design requires more information about ground motion,which should be obtained by evaluating seismic safety for pipeline engineering site.Different from a city＇s water pipeline network,the long-distance oil and gas pipeline system is a spatially linearly distributed system.For the uniform confidence of seismic safety,a long-distance oil and pipeline formed with pump stations and different-class pipe segments should be considered as a whole system when analyzing seismic risk.Considering the uncertainty of earthquake magnitude,the design-basis fault displacements corresponding to the different pipeline classes are proposed to improve deterministic seismic hazard analysis（DSHA）.A new empirical relationship between the maximum fault displacement and the surface-wave magnitude is obtained with the supplemented earthquake data in East Asia.The estimation of fault displacement for a refined oil pipeline in Wenchuan MS8.0 earthquake is introduced as an example in this paper.

Criterions and Measures of Route Selection of Shallowly Embedded Long-Distance Oil and Gas Pipeline in Mountain Areas

According to the engineering investigation of long-distance oil and gas pipelines, the criterions and measures of route selection are drawn as follows： the flat landform is the first choice in route alignment. The foot of mountain is the first choice when the route passes by the valley. The route should pass by but the shady and deposited slope and not in sunny and erosive slope as possible as it can. The pipeline should be vertical to contour climbing and descending the mountain except steep slope. Tunnel can be used in crossing foothill. Perpendicularly traversing the river is better than beveling; the worst choice is to put the pipeline along the river. Bypass is the best choice in karsts area. The order of route selection should be pre-choosing, investigation, optimization and adjustment.

A Dual-Parameter Fusion Distributed Optical Fiber Sensor System for Oil and Gas Pipeline Monitoring

For oil and gas pipeline monitoring applications, this paper proposed a dual-parameter fusion distributed fiber optic sensor system that enables distributed temperature and distributed vibration measurements in a single fiber. Through the fiber-scattering spectrum time domain detection combined with coded pulse sequence and Raman scattering spectrum is obtained, which realizes high-resolution temperature measurement and wide-band vibrational wave measurement. The experimental results show that, on 10 km optical fiber measurement, temperature resolution up to 0.1?C and vibration response frequency range 20 Hz - 5 kHz. This sensing system achieves temperature and vibration dual-parameter measurements with fiber optics, greatly simplifying the system and facilitating installation and it can be widely used in oil and gas pipeline monitoring.

Analysing Delay Impact from Potential Risk Factors on Project Delivery of Oil and Gas Pipeline:A Case Study in IRAQ

The aim of this paper is to present the design and specifications of an integrated Delay Analysis Framework(DAF),which could be used to quantify the delay caused by the Risk Factors(RFs)in Oil and Gas Pipelines(OGPs)projects in a simple and systematic way.The main inputs of the DAF are(i)the potential list of RFs in the projects and their impact levels on the projects and the estimated maximum and minimum duration of each task.Monte Carlo Simulation integrated within@Risk simulator was the key process algorithm that used to quantify the impact of delay caused by the associated RFs.The key output of the DAF is the amount of potential delay caused by RFs in the OGP project.The functionalities of the developed DAF were evaluated using a case study of newly developed OGP project,in the south of Iraq.It is found that the case study project might have delayed by 45 days if neglected the consideration of the RFs associated with the project at the construction stage.The paper concludes that identifying the associated RFs and analysing the potential delay in advance will help in reducing the construction delay and improving the effectiveness of the project delivery by taking suitable risk mitigation measures.

Main Indexes of Pipeline Transportation of Crude Oil and Gas

ＭａｉｎＩｎｄｅｘｅｓｏｆＰｉｐｅｌｉｎｅＴｒａｎｓｐｏｒｔａｔｉｏｎｏｆＣｒｕｄｅＯｉｌａｎｄＧａｓ￥／／Ｎｏｔｅ：Ｔｈｅｔｏｔａｌｌｅｎｇｔｈｏｆｃｒｕｄｅａｎｄｇａｓｐｉｐｅｌｉｎｅｒｅａｃｈｅｄ１７５８７ｋｍ，ｉｎｃｌｕｄｉｎｇ９２７２ｋｍｏ...

Global oil and gas development in 2022:Situation,trends and enlightenment

Through analysis of four aspects,including the distribution and production of global oil and gas fields,the distribution and changes of remaining recoverable reserves,the differences in oil and gas production between regions/countries,and the development potential of oil and gas fields with production capacity not built and to be built,this paper presents the situation and trends of global oil and gas development in 2022.It is found that,in 2022,oil and gas fields are widely distributed worldwide,and upstream production activities continue to recover;the oil and gas reserves decrease slightly year on year,and the oil and gas reserves in sea areas increase significantly;the oil and gas production increases continuously,and the key resource countries make a significant contribution in oil and gas production growth;the oil and gas fields with production capacity not built and to be built hold abundant reserves,and their development potential will be gradually released with the economic benefits increase.Further analysis is conducted from the perspectives of global oil and gas resources continuity,geopolitical risks,potential of international cooperation,and upgrade of unconventional oil and gas technology.Finally,in view of core business domains and strategies under the new situation,the Chinese oil companies are recommended to:(1)keep a foothold in onshore conventional oil and gas development by virtue of their comparative advantages and learning from other’s experience in cooperation;(2)carry out pilot tests on development adjustment,and deepen the international cooperation in enhanced oil/gas recovery;(3)improve the oil and gas operation capabilities in sea areas to transform from follower as minority shareholder to joint venture and then to independent operations;and(4)seek appropriate ways for shale oil/gas development to reduce the dependence on foreign oil and gas.

Analysis of the world deepwater oil and gas exploration situation

The global trends in deepwater oil and gas exploration,characteristics of deepwater oil and gas discovery,and layout of deepwater oil and gas exploration business by seven major international oil companies are systematically analyzed using commercial databases(e.g.S&P Global and Rystad)and public information of oil companies.The deepwater area is currently the most important domain for global oil and gas exploration and discovery,with the most discoveries and reserves in passive continental margin basins.The deepwater discoveries have the greatest contribution to the total newly discovered oil and gas reserves in the sea areas,with an increasing number of lithological reservoirs discovered,and oil and gas discoveries mainly distributed in the Mesozoic–Cenozoic.The seven major international oil companies are widely active in various aspects of deepwater oil and gas exploration and development,and play a leading role.Based on years of theoretical understanding of global oil and gas geology and resource evaluation,it is proposed that favorable deepwater exploration areas in the future will mainly focus on three major areas:the Atlantic coast,the Indian Ocean periphery,and the Arctic Ocean periphery.Six suggestions are put forward for expanding overseas deepwater oil and gas exploration business:first,expand the sources for obtaining multi-user seismic data and improve the scientific selection of deepwater exploration areas;second,increase efforts to obtain deepwater exploration projects in key areas;third,adopt various methods to access into/exit from resource licenses flexibly;fourth,acquire licenses with large equity and operate in“dual-exploration”model;fifth,strengthen cooperation with leading international oil companies in deepwater technology;and sixth,improve business operation capabilities and gradually transform from“non-operators”to“operators”.

Chinese Oil Companies＇ Overseas Cooperation in 2016

The paper analyzed the development and features of China's oil companies' overseas business in 2016.Despite the plummeting crude price and a weak global economy,these companies managed to do well in foreign countries.They steadily increased their shares of oil and gas in overseas oil and gas projects with their distinctive and unique ways:the three state-owned oil companies had focused on the countries involved in the One-BeltOne-Road Initiative,and others had been stressed more on international cooperation in a broader sense and areas.The small-and middle-scale companies had been matured and grew during the process.The central and local governments also played indispensable roles by providing need support for the cooperations.

Development and Application of Methane Leakage Monitoring System for Gas Transmission Pipeline

Oil and gas pipeline transportation,as a relatively safe way of oil and gas transportation,undertakes most of the transportation tasks of crude oil and natural gas.Oil and gas pipeline accidents affect a wide range of consequences.Therefore,the oil and gas pipeline leakage detection is paid more and more attention.In this paper,ultra-low power methane gas sensor is selected to collect methane gas concentration in the air,and wireless network technology is used to build a wireless network sensor system with 4G function.Through the sensor distribution along the pipeline,it can intuitively and accurately judge whether there is a micro-leakage in the pipeline,and understand the diffusion situation after the leakage.The sensor system has high reliability and stability,and has high value of popularization and application.

Effects of Internal Flow on Vortex-Induced Vibration and Fatigue Life of Submarine Pipelines

With the rapid development of the offshore oil industries, submarine oil / gas pipelines have been widely used. Under the complicated submarine environmental conditions, the dynamic characteristics of pipelines show some new features due to the existence of both internal and external flows. The paper is intended to investigate the vortex-induced vibration of the suspended pipeline span exposed to submarine steady flow. Especially, the effects of the flow inside the pipeline are taken into account. Its influences on the amplitude of pipeline response, and then on the fatigue life, are given in terms of the velocity of the internal flow.

Application of the Fuzzy Comprehensive Assessment Technique to Optimal Selection of Pipeline Design Alternative

s: Regarding the influencing factors in an optimal selection of pipeline design alternative as fuzzy variables with different weights, a fuzzy comprehensive assessment was applied to an optimal selection of the design alternative. Giving the Lanzhou-Chengdu pipeline as an example to explain the process, the result shows that this method is acceptable.