Topology Chemical Process Research on the Condensing and Growing Phase Multi Micro Oil Droplets Based on Hydrodynamics

The hydrodynamic research about the droplet condensing of the multi phase liquid state on the surface of the coal glass and water discusses the deepening process of convex shape curve and the formation of S shape, and puts emphasis on describing the diagram formation method of the later. In the induction period the active diagram of the micro droplet is decided by pH value forming as convex shape diagram or S shape diagram. When pH value is above 4.0, the damage of convex shape diagram cannot be recovered, in that case produce S shape activity diagram. When pH value is equal to or above 12.0, the hard surface with alkali liquid state loses adhesion, so that the micro droplet condensing of the multi phase liquid state stops completely. The research result shows that the water cleaning conditions of getting rid of the oil micro droplets can be decided by the pH value.

Adhesion forces for water/oil droplet and bubble on coking coal surfaces with different roughness

Surface roughness plays a significant role in floatability of coal.In the present paper,coking coal surface was polished by three different sandpapers and the surface properties were characterized by contact angle and roughness measurements.The effect of surface roughness on floatability was investigated by adhesion force measurement system for measuring interaction forces between droplets/bubbles and coking coal surfaces with different roughness.The results showed that the contact angle decreased with increasing roughness yet the adhesion force between the water droplet and coal surface increased owing to the increased contact line and the appearance of line pinning.Maximum adhesion forces between water and surfaces were 111.70,125.48,and 136.42μN when the roughness was 0.23,0.98,and 2.79 μm,respectively.In contrast,under a liquid environment,the adhesion forces between air bubble/oil droplet and coal surfaces were decreased with increasing roughness because of the restriction by water.Maximum adhesion forces of increasing roughness were 97.14,42.76,and 17.86 μN measured at interfaces between air bubble and coal surfaces and 169.48,145.84,and 121.02 lN between oil droplet and surfaces,respectively.Decreasing roughness could be beneficial to the spreading of oil droplets and the adhesion of bubbles which is conducive to flotation separation.

An experimental study on oil droplet size distribution in subsurface oil releases

Oil droplet size distribution （ODSD） plays a critical role in the rising velocity and transport of oil droplets in subsurface oil releases. In this paper, subsurface oil release experiments were conducted to study ODSD under different experimental conditions in a laboratory water tank observed by two high-speed cameras in March and April 2017. The correlation formulas Oh=lO.2Re-~ and Oh=39.2Re-1 （Re represents Reynolds number and Oh represents Ohnesorge number） were established to distinguish the boundaries of the three instability regimes in dimensionless space based on the experimental results. The oil droplet sizes from the experimental data showed an excellent match to the Rosin-Rammler distribution function with determination coefficients ranging from 0.86 to 1.00 for Lvda 10-1 oil. This paper also explored the influence factors on and change rules ofoil droplet size. The volume median diameter d50 decreased steadily with increasing jet velocity, and a sharp decrease occurred in the laminar-breakup regime. At Weber numbers （We） 〈100, the orifice diameter and oil viscosity appeared to have a large influence on the mean droplet diameter. At 100〈We〈1 000, the oil viscosity appeared to have a larger influence on the relative mean droplet diameter.

Behaviors of a micro oil droplet in an EHL contact

Oil-air lubrication supplies lubricants in the form of droplets to elastohydrodynamic lubrication (EHL)contacts,such as those in high-speed spindle bearings.However,there is a paucity of information related to understanding the lubrication behaviors of oil droplets within EHL contacts.In this study,behaviors of lubricant droplets,in terms of spreading around a static contact as well as passing through a roiling contact,were studied with an optical ball-on-disk EHL test rig.Influences of oil droplet size,viscosity,and surface tension on droplet spreading were examined.Lubricating film formation was also investigated when droplets traveled through the EHL contact region.The results indicated that droplet size and running speed significantly influenced film profiles.With increasing entrainment speeds,a small droplet passed through the contact without spreading and generated films with a significant depression in the central contact region.