Micro-geological causes and macro-geological controlling factors of low-resistivity oil layers in the Puao Oilfield

Low-resistivity oil layers are often missed in logging interpretation because of their resistivity close to or below the resistivity of nearby water layers. Typical low-resistivity oil layers have been found in the past few years in the Putaohua reservoir of the Puao Oilfield in the south of the Daqing placanticline by detailed exploration. Based on a study of micro-geological causes of low-resistivity oil layers, the macro-geological controlling factors were analyzed through comprehensive research of regional depositional background, geological structure, and oil-water relations combined with core, water testing, well logging, and scanning electron microscopy data. The results showed that the formation and distribution of Putaohua low-resistivity oil layers in the Puao Oilfield were controlled by depositional environment, sedimentary facies, diagenesis, motive power of hydrocarbon accumulation, and acidity and alkalinity of reservoir liquid. The low-resistivity oil layers caused by high bound-water saturation were controlled by deposition and diagenesis, those caused by high free-water saturation were controlled by structural amplitude and motive power of hydrocarbon accumulation. Those caused by formation water with high salinity were controlled by the ancient saline water depositional environment and faulted structure and those caused by additional conductivity of shale were controlled by paleoclimate and acidity and alkalinity of reservoir liquid. Consideration of both micro-geological causes and macro-geological controlling factors is important in identifying low-resistivity oil layers.

Pore structure differences of the extra-low permeability sandstone reservoirs and the causes of low resistivity oil layers: A case study of Block Yanwumao in the middle of Ordos Basin, NW China

The influence of pore structure difference on rock electrical characteristics of reservoir and oil reservoir was analyzed taking Triassic Chang 6 reservoir in Block Yanwumao in the middle of Ordos Basin as an example. The relationship between the pore structure difference and the low resistivity oil layer was revealed and demonstrated through core observation, lab experiments, geological research, well log interpretation and trial production etc. The results show that there were two kinds of oil layers in Chang 6 oil layer set, normal oil layer and low resistivity oil layer in the region, corresponding to two types of pore structures, pore type mono-medium and micro-fracture-pore type double-medium; the development of micro-fracture changed greatly the micro-pore structure of the reservoir, and the pore structure difference had an important influence on the rock electrical characteristics of the extra-low permeability sandstone reservoir and oil reservoir; the normal oil layers had obvious characteristics of pore-type mono-medium, and were concentrated in Chang 61, Chang 6232 and Chang 62; the low resistivity oil layers had obvious characteristics of micro-fracture-pore type double-medium, which were mainly distributed in Chang 612 and Chang 63. The mud filtrate penetrated deep into the oil layers along the micro-cracks, leading to sharp reduction of resistivity, and thus low resistivity of the oil layer; the low resistivity oil layers had better storage capacity and higher productivity than the normal oil layers.

Seismic identification of channel sandbodies in the Fuyang oil layer in North Songliao Basin, China

在北方 Songliao 盆的 Fuyang 油层被描绘由薄内部 bedded 沙和页岩，强壮的侧面的变化，强壮的水库 heterogeniety 等等。单个沙层的厚度通常是 3 5 m。用地震技术识别 Fuyang 油层的隧道沙身体由于低地震决定是很困难的。作为一个例子拿 GTZ 区域，我们讨论隧道沙身体的基因特征并且在使用地震技术预言隧道沙身体指出真实困难。为隧道的鉴定的二个方法被介绍：频率光谱成像并且预先叠方位角的 anisotropy。用二个地震方法在 Fuyu 油层识别隧道沙身体与井数据相比导致成功率直到 80% 。

Fluid identification and tight oil layer classification for the southwestern Mahu Sag,Junggar Basin using NMR logging-based spectrum decomposition

The intricate distribution of oil and water in tight rocks makes pinpointing oil layers challenging.While conventional identification methods offer potential solutions,their limited accuracy precludes them from being effective in their applications to unconventional reservoirs.This study employed nuclear magnetic resonance(NMR)spectrum decomposition to dissect the NMR T_(2)spectrum into multiple subspectra.Furthermore,it employed laboratory NMR experiments to ascertain the fluid properties of these sub-spectra,aiming to enhance identification accuracy.The findings indicate that fluids of distinct properties overlap in the T_(2)spectra,with bound water,movable water,bound oil,and movable oil appearing sequentially from the low-value zone to the high-value zone.Consequently,an oil layer classification scheme was proposed,which considers the physical properties of reservoirs,oil-bearing capacity,and the characteristics of both mobility and the oil-water two-phase flow.When applied to tight oil layer identification,the scheme's outcomes align closely with actual test results.A horizontal well,deployed based on these findings,has produced high-yield industrial oil flow,underscoring the precision and dependability of this new approach.

Palm Oil Microencapsulation by Coacervation, Thin Layer Drying, and Silica Dioxide Absorption Technique

Indonesia is the largest palm oil producer in the world. The content of β-carotene in palm oil, which can act as pro-vitamin A, is relatively high, so it has great potential for overcoming cases of vitamin A deficiency. By microencapsulation process of palm oil, β-carotene content in palm oil will be more stable and have a longer shelf life. There are three methods of microencapsulation used in this study, namely coacervation, thin-layer drying, and SiO2 absorption technique, which theoretically are suitable for encapsulating β-carotene in palm oil. The aim of this research is to compare and find the most suitable method of microencapsulation process of palm oil to obtain the highest β-carotene content and retention. Results show that those three methods are significantly different in affecting water absorption, solubility in water, yield, microencapsulation efficiency, β-carotene content, and retention of microencapsulated palm oil. The microencapsulated palm oil made from thin layer drying method has the highest β-carotene content at 200.16 μg/g and β-carotene retention of 68.89%. It also has low water absorption and high water solubility, so it can be applied as a powder premix in food as vitamin A supplement.

Application of Thin Layer Chromatography in Preparation of Drug Containing Serum of Eucalyptus Oil

[Objectives] To explore whether the thin layer chromatography( TLC) can be used to guide the preparation of drug containing serum of eucalyptus oil. [Methods]Eucalyptus oil samples with different dilution ratio were detected by TLC. Eucalyptus oil was intragastrically administered to mice,serum samples of different eucalyptus oil doses,different intragastric administration methods and different blood sampling times were collected. The above samples were detected by TLC,and the above results were verified by gas chromatography. [Results] TLC can detect concentration difference of eucalyptus oil samples with different dilution ratio. TLC can provide qualitative and semi-quantitative detection of eucalyptus oil in serum. High,medium and low dose of eucalyptus oil in serum had different effects on the growth of MCF-7 cells in the SD rats( P < 0. 05). [Conclusions] TLC can be used to guide the preparation of drug containing serum of eucalyptus oil.

Development of Layered Treatment Technique for Multiple Heavy Oil Reservoirs

ＤｅｖｅｌｏｐｍｅｎｔｏｆＬａｙｅｒｅｄＴｒｅａｔｍｅｎｔＴｅｃｈｎｉｑｕｅｆｏｒＭｕｌｔｉｐｌｅＨｅａｖｙＯｉｌＲｅｓｅｒｖｏｉｒｓＨｕＺｈｉｍｉａｎａｎｄＷｕＤｅｈｕａ（ＤｒｉｌｌｉｎｇａｎｄＯｉｌＰｒｏｄｕｃｔｉｏｎＴｅｃｈｎｉｑｕｅＲｅｓｅａ...

奥连特盆地隐蔽油藏高效滚动勘探开发方法技术及应用——以厄瓜多尔14和17区块为例

厄瓜多尔14和17区块位于奥连特盆地前渊带,主要含油层系为Napo组的M1,U和T段。现已开发油田进入高含水阶段,资源接替面临挑战。通过基于趋势面驱动的叠后地震数据连片一致性处理、时-频衰减高精度合成记录标定和解释及各向异性变速成图,精细刻画了低幅度构造,发现了一批低幅度构造油藏。采用分频迭代去噪拾取薄层弱反射系数,以其重构的叠后宽频有效信号为约束,采用相控波形非线性反演,定量预测了埋深3 000 m的2~5 m厚潮汐水道砂岩,发现了多个M1超薄层岩性油藏。依据区域水动力条件、低幅度构造油藏油-水界面趋势及油藏能量特征,发现了LU水动力油藏并滚动扩边。通过观察大量岩心薄片,发现海绿石在石英砂岩储层中呈胶结物和颗粒两种赋存状态,建立了海绿石双组构测井解释体积模型,评价并识别了UT低电阻率油藏。基于热带雨林地表和隐蔽油藏特点,按照“整体部署、分批实施、跟踪评价、及时调整”的策略,实现滚动勘探、评价和快速建产,探井和评价井成功率大于90%。

大庆油田裸眼井测井技术进展与展望

为了提高大庆油田裸眼井测井技术支撑能力和研究成果领先水平,全面回顾了大庆油田测井采集系列及解释技术的创新发展历程,系统总结了特高含水期剩余油解释、火山岩等复杂岩性测井评价、碎屑岩储量参数解释、非常规油气“甜点”分类、缝洞型碳酸盐岩储层测井评价等油田勘探开发测井评价技术。在客观分析大庆油田勘探开发测井解释评价需求和面临瓶颈问题的基础上,结合当前油田测井评价对象规模小、物性差、埋藏深、地层结构复杂、非均质性强的特点。指明了测井解释评价核心技术主攻方向。围绕新阶段测井采集及解释评价技术体系完善与建立,对高分辨率和成像测井采集、后油藏时期和非常规测井解释评价、新一代智能解释技术体系等未来发展进行了展望。

姬塬地区长8油层组储层特征分析

为确定长8油层储层现今表征,储层物性受黏土矿物胶结物控制模式,储层沉积作用和沉积后期所经历的成岩变化,通过铸体薄片、扫描电镜等方法研究了储层基本特征和成岩作用及沉积作用,在整体低渗的背景下,部分位于相对渗透率较高区域的油井有较高的产量,理清研究区长8储层富集规律,对地区内岩石孔隙度下降因素进行剖析。结果表明,姬塬地区有利储层多发育水下分流河道和河口坝沉积,特别是砂体中心部位储层物性是最好,可见长8油层组的储集性能和渗流性能好,即粒间孔型、粒间孔+溶孔型和溶孔+粒间孔型。溶孔型、粒间孔+微孔型两种孔隙组合类型的渗流性能较差。微孔型和溶孔+微孔型两种孔隙组合类型的储集空间主要由半径极小的微孔构成,连通性较差,其孔隙内表面积和渗流阻力,储集性能和渗流性能较差。

Deepwater and Deep Layers： the Strategic Choices for China＇s Oil and Gas Resources Development

On December 2,2017,the 2^(nd) Seminaron the Development Strategy of China‘s Oil and Gas Resources was held in Beijing.This seminar was hosted by the Strategic Research Center for Oil and Gas Resources,Ministry of Land(MLR)and Resources and sponsored by both the CNOOC Exploration Department and the School of Ocean and Earth Sciences of Tongji University.With the theme of"deepwater and deep-layer oil and gas resources and development strategy",the

多分支废弃油井层温衰减规律及注入参数对注采性能的影响

利用废弃油井开发地热资源是降低地热开发成本、促进商业推广的有效措施,其中层温衰减规律对地热系统取热效果具有重要影响。为此,以废弃油井储层为研究对象,结合泰森多边形理论对储层裂缝进行了划分,建立了三维油水两相热流耦合数值模型,分析了不同储层条件与布井结构下的层温衰减规律,探究了注入参数等因素对地热注采性能的影响。研究结果表明:(1)低渗透储层抽采30年生产温度最大差值可达22.08 K,高渗透储层(1.0×10^(-13) m^(2))温度过度衰减,长年限采热效率低;(2)储层含油率与生产温度和发电功率呈正相关关系,生产30年后差值最大可达11.57 K与0.12 MW;(3)分支井沿垂直方向会形成低温波谷,层温衰减高于储层其余部分,数量增加对注采影响小;(4)注入速率与发电功率、生产温度分别呈正、负相关关系,但注入速率超过89 kg/s时不利于长年限开采。结论认为:(1)储层取热性能对初始渗透率最为敏感,注入速率与储层含油率次之,优先开发低渗透储层有利于长年限采热;(2)应利用油田地热降低稠油黏度,形成地热辅助采油模式,以实现经济效应最大化;(3)选取6支分支井与89 kg/s的注入速率可得到可观取热效果和较好的经济效益。

华庆油田H201延8油藏小层划分方案及地质意义

在充分吸收前人对H201延8油藏的地质认识的基础上,结合新、老井资料对研究区标志层及各小层电性响应、岩性组合、沉积旋回特征进行深入研究,基于以上研究成果将研究区内的延8地层重新划分为延81、延82、延83三个小层,利用划分结果绘制地层剖面及构造图,对地层厚度及平面展布特征进行了研究。其中,延8地层整体厚度介于27~42m之间,各小层间厚度相差不大,平面上整体呈现东高西低的趋势,北部较南部坡降大,内部发育局部微构造高点。

油液多层过滤去固分离及特性分析

针对油-固体系中单层滤网无法同时满足过滤精度高与使用寿命长的问题,采用多层过滤器并对其去固分离特性展开分析。通过耦合流场控制方程、颗粒运动方程、颗粒-壁面碰撞模型方程,建立了适用油-固体系的多层过滤数值分析模型,探究了油-固体系中多层过滤器的去固分离特性,分析了入口流速和滤网层数对流场特性及过滤比(β)的影响。结果表明:多层过滤器可有效过滤孔径与粒径比(k_(d))大于15的固体颗粒;增加滤网层数,d_(5)和d_(20)(β分别为5和20时对应的颗粒粒径)显著降低;增大入口流速,d_(5)和d_(20)变化较小;当β<5时,颗粒粒径的变化对过滤比的影响较小;当β>5时,颗粒粒径的小幅增大可能导致过滤比显著提高。

Calculating single layer production contribution of heavy oil commingled wells by analysis of aromatic parameters in whole-oil GC-MS

Traditional fluid production profile logging is not usually suitable for heavy-viscous crude oil wells.Biodegradation of heavy oil can lead to the loss of n-alkanes,and the use of chromatogram fingerprint techniques in studying the production contributions of single layers in heavy oil commingled wells has limitations.However,aromatic compounds are relatively well preserved.We took the heavy oil commingled wells of small layers NG55 and NG61 in the ninth area of the Gudong oil field as examples.Based on the principle of chromatography,the whole-oil GC-MS was used,and the aromatic parameters which have a strongly linear relationship with the ratio of mixed two end member oils were verified and selected in laboratory.Studies showed that the ratio of （1,4,6-＋ 2,3,6-trimethylnaphthalene） to 1,2,5-trimethylnaphthalene has a strongly linear relationship with the ratio of the mixed two end member oils （R2=0.992）.The oil contributions from single layers NG55 and NG61 in six commingled heavy oil wells were calculated using established charts and this relationship.The calculated results are consistent with the results of long period dynamic monitoring and logging interpretation in the study area and can provide a scientific basis for monitoring production performance and hierarchical management of reservoirs.The study provides a new geochemical method for calculation of the contributions of single layers in heavy oil commingled wells when conventional fluid production profile logging is not suitable.

电容屏破损缺陷局部放电过程规律特征及仿真分析

油纸电容式变压器套管因性能好、成本低而被广泛采用。当电容屏存在边缘破损工艺缺陷时易发生局部放电,进而会改变油纸绝缘性能,缩短套管使用寿命,严重时危及电网设备安全运行。为研究电容屏破损局部放电过程变化规律,明确放电发展阶段,该文搭建了缺陷套管放电实验模型分析局放过程中相位谱图、放电量等参数发展规律,并基于实验规律及流体漂移扩散理论、固体双极电荷传输理论,建立了末屏缺陷针板沿面放电过程仿真模型,结合仿真中电荷形态变化、放电时间及油纸界面电荷密度分布对电容屏破损放电过程进行阶段划分:放电初始阶段,铝箔尖端电荷聚集发生电晕放电;放电发展阶段,尖端处带电粒子在电场作用下向油纸发展,小部分达到油纸界面产生沿面放电;放电破坏阶段,经过长时间沿面放电进入油纸发生预击穿,电场强度更大使带电粒子能量更高,冲击油纸表面造成油纸表面纤维素断裂炭化形成通道。仿真结果与实验结论相对应,证明了仿真的有效性。该文的研究成果进一步阐明了油纸套管电容屏工艺缺陷局部放电的过程及机理。

基于门控循环单元网络的低阻油层测井流体识别方法

研究区块低阻油层发育广泛,油层和水层的电阻率相差不大,导致测井流体识别较为困难。为了有效识别低阻油层,采用少数类过采样技术(synthetic minority oversampling technique,Smote)对油水同层,油层等少数类样本进行过采样使数据集均衡;并利用门控循环单元(gated recurrent unit,GRU)网络模型进行低阻油层的流体识别。通过相关性分析确定自然伽马(GR)、深侧向电阻率(RD)、密度(DEN)等8条测井曲线数据作为输入训练模型,应用于中实际资料中,并将GRU与传统RNN和其他3种机器学习算法对比。结果表明:序列数据模型的流体识别效果比传统机器学习模型好,且基于Smote-GRU的流体识别模型的符合率达到89.5%,相对传统循环神经网络(recurrent neural network,RNN)的81.1%,取得了较好的应用效果。通过对照试验还证实了Smote算法提高了分类器对少数类样本的识别率。所提出的方法可为样本不均衡的低阻油层的流体识别提供参考。

松辽盆地葡北油田油源断裂分类及其对油气分布的控制作用

为了研究松辽盆地北部断裂对葡北油田油气成藏的作用,基于断层引起的地层变形特征,通过断层地震特征的精细分析,重新划分并研究了葡北油田葡萄花油层油源断裂对该油田葡萄花油层成藏的作用。根据断裂是否连接源岩和目的储层,且在油气成藏期断裂是否活动,包括断距相对较大的断裂活动和无明显断距的微弱活动,划分了3种类型的油源断裂:一是沟通青一段源岩和葡萄花油层且断穿至T 06反射层(嫩江组三段底界面)的穿透型油源断裂;二是连接青一段源岩和葡萄花油层,在油气成藏期没有明显活动但引起断层端部发生褶皱变形的断层端部褶皱型油源断裂;三是连接青一段源岩和葡萄花油层在油气成藏期没有明显活动但断层两盘地层存在变形差异特征的断层两盘差异型油源断裂。研究结果表明,油源断裂与葡北油田葡萄花油层油气平面分布吻合程度更高,其中,穿透型油源断裂对油气聚集控制作用最为显著,揭示了油源断裂的活动强度以及油源断裂与断层圈闭的匹配所控制的油气成藏数量对油气富集的差异性的影响,该研究对类似区块油源断裂对油气控制作用分析可借鉴参考。

Residual oil evolution based on displacement characteristic curve

The purpose of this study was to determine the displacement and dynamic distribution characteristics of the remaining oil in the two development stages of water flooding and subsequent alkaline surfactant polymer(ASP) flooding. The well pattern types in the water and ASP flooding stages are a longdistance determinant well pattern and short-distance five-point well pattern, respectively. The type A displacement characteristic curve can be obtained using the production data, and the slope of the straight-line section of the curve can reflect the displacement strength of the oil displacement agent. A numerical simulation was carried out based on the geological model. The results revealed that the injected water advances steadily with a large-distance determinant water-flooding well pattern. The single-well water production rate increases monotonically during water flooding. There is a significant positive correlation between the cumulative water-oil ratio and the formation parameter. Differential seepage between the oil and water phases is the main factor causing residual oil formation after water flooding, while the residual oil is still relatively concentrated. The effect of the chemical oildisplacement agent on improving the oil-water two-phase seepage flow has distinct stages during ASP flooding. The remaining oil production is extremely sporadic after ASP flooding.