A STAMP-Game model for accident analysis in oil and gas industry

Accidents in engineered systems are usually generated by complex socio-technical factors.It is beneficial to investigate the increasing complexity and coupling of these factors from the perspective of system safety.Based on system and control theories,System-Theoretic Accident Model and Processes(STAMP)is a widely recognized approach for accident analysis.In this paper,we propose a STAMP-Game model to analyze accidents in oil and gas storage and transportation systems.Stakeholders in accident analysis by STAMP can be regarded as players of a game.Game theory can,thus,be adopted in accident analysis to depict the competition and cooperation between stakeholders.Subsequently,we established a game model to study the strategies of both supervisory and supervised entities.The obtained results demonstrate that the proposed game model allows for identifying the effectiveness deficiency of the supervisory entity,and the safety and protection altitudes of the supervised entity.The STAMP-Game model can generate quantitative parameters for supporting the behavior and strategy selections of the supervisory and supervised entities.The quantitative data obtained can be used to guide the safety improvement,to reduce the costs of safety regulation violation and accident risk.

Investigation of flue gas water-alternating gas (flue gas–WAG) injection for enhanced oil recovery and multicomponent flue gas storage in the post-waterflooding reservoir

Flue gas fooding is one of the important technologies to improve oil recovery and achieve greenhouse gas storage.In order to study multicomponent fue gas storage capacity and enhanced oil recovery(EOR)performance of fue gas water-alternating gas(fue gas-WAG)injection after continuous waterfooding in an oil reservoir,a long core fooding system was built.The experimental results showed that the oil recovery factor of fue gas-WAG fooding was increased by 21.25%after continuous waterfooding and fue gas-WAG fooding could further enhance oil recovery and reduce water cut signifcantly.A novel material balance model based on storage mechanism was developed to estimate the multicomponent fue gas storage capacity and storage capacity of each component of fue gas in reservoir oil,water and as free gas in the post-waterfooding reservoir.The ultimate storage ratio of fue gas is 16%in the fue gas-WAG fooding process.The calculation results of fue gas storage capacity showed that the injection gas storage capacity mainly consists of N_(2) and CO_(2),only N_(2) exists as free gas phase in cores,and other components of injection gas are dissolved in oil and water.Finally,injection strategies from three perspectives for fue gas storage,EOR,and combination of fue gas storage and EOR were proposed,respectively.

Norwegian oil and gas storage in rock caverns-Technology based on experience from hydropower development

Underground storage in rock caverns is widely used in Norway for many different petroleum products,such as crude oil,fuel,propane and butane.Basically,the caverns for such storages are unlined,i.e.containment is ensured without using any steel lining or membrane.The main basis for the storage technology originates from the extensive hydropower development in Norway.As part of this activity,about 4500 km of tunnels and shafts have been excavated,and around 200 large powerhouse caverns have been constructed.The hydropower tunnels are mainly unlined,with hydrostatic water pressure on unlined rock of up to 1000 m.Some of the projects also include air cushion chambers with volumes of up to 1×10^(5)m^(3)and air pressure up to 7.7 MPa.Many lessons which are valuable also for underground oil and gas storage have been learnt from these projects.For a storage project to become successful,systematic,well planned design and ground investigation procedures are crucial.The main steps of the design procedure are first to define the optimum location of the project,and then to optimize orientation,shape/geometry and dimensions of caverns and tunnels.As part of the procedure,ground investigations have to be carried out at several steps integrated with the progress of design.The investigation and design procedures,and the great significance of these for the project to become successful will be discussed.Case examples of oil and gas storage in unlined rock caverns are given,illustrating the relevancy of experience from high-pressure hydropower projects for planning and design of unlined caverns for oil and gas storage.

The challenges facing the oil and gas storage and transportation technology and its developing direction

In recent years, our country is increasingly dependent on the use of the oil resources, and the degree of the oil mining is also continuously upgrading. After the completion of the tasks related to the oil mining in the lands, the technologies for the development of the offshore oil mining are particularly important. Among these problems, after the exploitation, the storage and transportation of the offshore oil and gas is worthy of the discussion of the technical personnel. From the experience of the oil and gas storage and transportation in the long years, in some environmentally degraded areas, there are problems in the efficiency and safety in the long pipeline transportation and the oil and gas mixed transportation, and in the transportation, there are also big shortcomings. In this paper, the author carries on the analysis of the existing questions encountering in our country＇s oil and gas storage and transportation~ and proposes the direction of the researches in the future oil and gas storage and transportation, and the purpose is to better improve the security of Cbina＇s oil and gas storage and transportation and to enhance the efficiency of the use of the oil and gas.

The development status and the prospect of the pipeline robots in the oil and gas storage and transportation industry

In the process of the constant development of the oil and gas storage and transportation technology, the maintenance of the large pipelines is an important task. At present, China vigorously promotes the use of the pipeline robots, for the maintenance of the oil and gas pipelines by the unique characteristics of the robots. In this paper, the author carries out the detailed analysis on the current situation of the development of the pipeline robots in the oil and gas storage and transportation industry, and compares the different applications of the pipeline robots at home and abroad. Starting from the principles of the operation of the robots, the author analyzes the characteristics of the different types of the robots, and combined with the existing conditions of the oil and gas storage and transportation in our country, the author tries to find the most favorable way of the working of the pipeline robots, to continuously improve the development of the oil and gas storage and transportation industry using the robot technologies.

Reform Exploration for Safety Course System of Oil and Gas Storage and Transportation Facilities

In recent years,the safety of oil and gas storage and transportation facilities has been paid more attention by the state and enterprises due to frequent accidents.The oil and gas storage and transportation facilities safety courses in China University of Petroleum(Beijing)includes“Engineering mechanics”,“Strength design of pipelines and tanks”and“Safety and integrity management of oil and gas storage and transportation facilities”.The three courses lack relevance and the teaching mode is too rigid,resulting in students losing their initiative in learning.If students can’t use the knowledge flexibly,it will affect the achievement of the objectives of the training program.Therefore,oil and gas storage and transportation facilities safety courses are reformed,training plans are adjusted and teaching methods are improved.The practice shows that the reform enriches the teaching content,improves the teaching quality,stimulates classroom activity and gets a good evaluation of students.The reform of safety courses has a certain significance for cultivating compound talents who have the ability to solve practical problems in engineering.

Multistring analysis of wellhead movement and uncemented casing strength in offshore oil and gas wells

This paper presents a theoretical method and a finite element method to describe wellhead movement and uncemented casing strength in offshore oil and gas wells.Parameters considered in the theoretical method include operating load during drilling and completion and the temperature field,pressure field and the end effect of pressure during gas production.The finite element method for multistring analysis is developed to simulate random contact between casings.The relevant finite element analysis scheme is also presented according to the actual procedures of drilling,completion and gas production.Finally,field cases are presented and analyzed using the proposed methods.These are four offshore wells in the South China Sea.The calculated wellhead growths during gas production are compared with measured values.The results show that the wellhead subsides during drilling and completion and grows up during gas production.The theoretical and finite element solutions for wellhead growth are in good agreement with measured values and the deviations of calculation are within 10％.The maximum von Mises stress on the uncemented intermediate casing occurs during the running of the oil tube.The maximum von Mises stress on the uncemented production casing,calculated with the theoretical method occurs at removing the blow-out-preventer （BOP） while that calculated with the finite element method occurs at gas production.Finite element solutions for von Mises stress are recommended and the uncemented casings of four wells satisfy strength requirements.

Rock engineering problems related to underground hydrocarbon storage

Oil and gas can be stored underground by a variety of means,such as in depleted oil and gas fields,in aquifers,in rock salt caverns,in unlined mined rock caverns,in lined shallow caverns and abandoned mines.Different types of underground storages require different geological and hydrogeological conditions and are associated with different rock engineering problems.However,the common issue is to ensure the gas-and oil-tightness of storage caverns.In other words,the stored oil and gas must not escape from the storage caverns.This may be realized by different means according to the types of storages and the sites geological conditions.There are basically two approaches of gas leakage control,i.e.permeability control and hydrodynamic containment.The latter involves the use of a water curtain system in many cases,which creates an artificial hydraulic boundary condition and helps to establish the required groundwater condition when needed.In addition to the common problems,the underground storage of liquefied petroleum gas(LPG) requires special attentions to the opening of rock joints,which result from the tensile thermal stress induced by the low storage temperature.Great care must be taken in choosing abandoned mines for oil and gas-storage since it is quite rare that the natural site conditions can meet the usual requirements,in particular for the gas tightness.The paper provides a general description of the gas leakage control for underground oil and gas storage projects,and addresses various rock engineering problems associated with selected types of storages in detail.

Exploration prospects of oil and gas in the Northwestern part of the Offshore Indus Basin, Pakistan

Oil and gas resources are short in Pakistan and no commercially viable oil and gas sources have been yet discovered in its offshore areas up to now.In this study,the onshore-offshore stratigraphic correlation and seismic data interpretation were conducted to determine the oil and gas resource potential in the Offshore Indus Basin,Pakistan.Based on the comprehensive analysis of the results and previous data,it is considered that the Cretaceous may widely exist and three sets of source rocks may be developed in the Offshore Indus Basin.The presence of Miocene mudstones has been proven by drilling to be high-quality source rocks,while the Cretaceous and Paleocene–Eocene mudstones are potential source rocks.Tectonic-lithologic traps are developed in the northwestern part of the basin affected by the strike-slip faults along Murray Ridge.Furthermore,the Cretaceous and Paleocene–Eocene source rocks are thick and are slightly affected by volcanic activities.Therefore,it can be inferred that the northwestern part of Offshore Indus Basin enjoys good prospects of oil and gas resources.

A sensitivity analysis of factors affecting in geologic CO_(2) storage in the Ordos Basin and its contribution to carbon neutrality

To accelerate the achievement of China’s carbon neutrality goal and to study the factors affecting the geologic CO_(2)storage in the Ordos Basin,China’s National Key R&D Programs propose to select the Chang 6 oil reservoir of the Yanchang Formation in the Ordos Basin as the target reservoir to conduct the geologic carbon capture and storage(CCS)of 100000 t per year.By applying the basic theories of disciplines such as seepage mechanics,multiphase fluid mechanics,and computational fluid mechanics and quantifying the amounts of CO_(2)captured in gas and dissolved forms,this study investigated the effects of seven factors that influence the CO_(2)storage capacity of reservoirs,namely reservoir porosity,horizontal permeability,temperature,formation stress,the ratio of vertical to horizontal permeability,capillary pressure,and residual gas saturation.The results show that the sensitivity of the factors affecting the gas capture capacity of CO_(2)decreases in the order of formation stress,temperature,residual gas saturation,horizontal permeability,and porosity.Meanwhile,the sensitivity of the factors affecting the dissolution capture capacity of CO_(2)decreases in the order of formation stress,residual gas saturation,temperature,horizontal permeability,and porosity.The sensitivity of the influencing factors can serve as the basis for carrying out a reasonable assessment of sites for future CO_(2)storage areas and for optimizing the design of existing CO_(2)storage areas.The sensitivity analysis of the influencing factors will provide basic data and technical support for implementing geologic CO_(2)storage and will assist in improving geologic CO_(2)storage technologies to achieve China’s carbon neutralization goal.

Mesozoic–Cenozoic stress field magnitude in Sichuan Basin, China and its adjacent areas and the implication on shale gas reservoir: Determination by acoustic emission in rocks

The Sichuan Basin is one of the vital basins in China,boasting abundant hydrocarbon reservoirs.To clarify the intensity of the tectonic stress field of different tectonic episodes since the Mesozoic and to identify the regional dynamic background of different tectonic movements in the Sichuan Basin and its adjacent areas,the characteristics of the acoustic emission in rocks in different strata of these areas were researched in this paper.Meanwhile,the tectonic stress magnitude in these areas since the Mesozoic was restored.The laws state that the tectonic stress varied with depth was revealed,followed by the discussion of the influence of structural stress intensity on structural patterns in different tectonic episodes.These were conducted based on the paleostress measurement by acoustic emission method and the inversion principle of the stress fields in ancient periods and the present,as well as previous research achievements.The results of this paper demonstrate that the third episode of Yanshanian Movement(Yanshanian III)had the maximum activity intensity and tremendously influenced the structural pattern in the study area.The maximum horizontal principal stress of Yanshanian III varied with depth as follows:0.0168 x+37.001(MPa),R^2=0.8891.The regional structural fractures were mainly formed in Yanshanian III in Xujiahe Formation,west Sichuan Basin,of which the maximum paleoprincipal stress ranging from 85.1 MPa to 120.1 MPa.In addition,the law stating the present maximum horizontal principal stress varies with depth was determined to be 0.0159 x+10.221(MPa),R^2=0.7868 in Wuling Mountain area.Meanwhile,it was determined to be 0.0221 x+9.4733(MPa),R^2=0.9121 in the western part of Xuefeng Mountain area and 0.0174 x+10.247(MPa),R^2=0.8064 in the whole study area.These research results will not only provide data for the simulation of stress field,the evaluation of deformation degree,and the prediction of structural fractures,but also offer absolute geological scientific bases for the elevation of favorable shale gas preservation.

油品调合调度优化问题的分步求解策略

针对炼油厂的成品油调合调度优化问题,提出了一种分步求解策略,即将调合调度问题分解为三个子优化问题,采用NLP和MILP模型对其分四步求解,这一策略不仅降低了问题的复杂度,还同时解决了油品调合调度中的配方优化、任务调度问题.实际算例结果表明该方法是有效的.

储罐自动化系统的研发及应用

介绍了中国石化镇海炼油化工股份有限公司储罐自动化系统的研发及应用。该系统由油罐数据采集系统、储罐监控系统以及油品移动管理系统组成。实际应用表明,该系统较好地实现了储罐操作与管理的自动化,提高了工作效率,降低了操作人员的劳动强度。

Characteristics of China’s oil and gas pool formation in latest geological history

The structural activities took place extensively in the Asia continent during the Cenozoic era owing to the strong continent-to-continent collision and continuous compression between the India Plate and the Eurasia Plate. Huang Jiqing called such structural activities Himalayan movement. China’s sedimentary basins developed and took shape mainly during the Himalayan movement period. It is also the main period for formation and development of the oil and gas reservoirs. Of 366 large and medium-sized oil and gas fields currently found in China, 212 reservoirs were formed in the Neo- gene-Quaternary period. The proportion is as high as 68.2%. The oil and gas migration and accumu- lation in the latest geological period, which were controlled by the times, properties, styles and strength of the Himalayan movement, took place mainly in eight regions, such as the low uplift area of Bohai Sea, the onshore faulted sag area of Bohai Bay, anticlinorium zone in Daqing, the foreland fold-and-thrust belt in West China, the tilted structural zone in West China, the cratonic palaeohigh in the Tarim Basin, the zone of fault and fold belt in the East Sichuan Basin, and the biological gas zone in the East Qaidam Basin. The oil and gas pool formations in those regions have their own charac- teristics. With the great potential and broad prospect, those regions are the main exploration areas in China in the future.

自动化技术在油气储运工程中的应用

自动化技术主要应用于油气储运工程中的油气处理净化、加热储存、输送等环节,本文主要是结合当前发展现状和工作实践,对油气储运过程中,如何更加广泛科学地应用好自动化技术进行分析和思考。

油气储运过程中管道腐蚀的原因及防腐措施

本文简要分析了油气储运过程中管道腐蚀的原因,并研究了管道防腐的重要措施,旨在为保证油气储运过程安全,促进能源发展做出贡献。

对新形势下油气储运安全工作的探析

随着我国国民经济的快速发展,各个领域对能源的需求不断增加,促进了油气储运工程的不断发展与创新。

油品储运中的防静电措施

本文分析了油品储运中的静电危害,提出了相应的防静电措施,旨在提供一定参考与借鉴。

储运自动化系统在惠炼的应用

随着炼油化工产品产量逐年提高和行业发展,储运自动化能够为企业经营管理提供最主要的核心业务数据;但是目前储运自动化程度较低,基本还处于起步阶段。中海惠州炼油全厂的所有储运信息都在中心控制室的DCS上进行集中监视和控制,主要包括罐区数据采集、罐信息管理、油品移动管理等功能模块。

Status and Prospect of CTL and SNG Industry

Since the beginning of this century, revolutionary progress has been made in the understanding of resources and in the mining technologies of the oil and gas industry. Advances in petroleum engineering technology represented by horizontal wells and large-scale fracturing have promoted the scale development of low-grade and unconventional oil and gas resources. After the rapid growth of natural gas production in China for more than 10 consecutive years, the replacement of conventional natural gas resources has been weak and unconventional natural gas has become the major force for increasing production. Coal based SNG(synthetic natural gas) has also become a major competitor in the domestic market. The development of CTL(coal-toliquids) and SNG industries has brought coal resources into the oil and gas product market, expanding the concept of traditional oil and gas resources. The continuous improvement of petroleum engineering technology has promoted the development of deep underground coal gasification technology, which has given economic value to the huge amount of deep coal resources that are unable to be exploited by underground mining, and provides a tremendous resource guarantee for the sustainable development of the traditional oil and gas industry. A preliminary calculation shows that deep underground coal gasification has a competitive advantage in cost compared with high-cost, low-grade, unconventional gas and coal-based natural gas. Deep underground coal gasification is a typical cross-disciplinary and cross-sectoral sophisticated technology. Domestic oil and gas enterprises have dominant advantages in the engineering technology of this field. Further technical integration innovation and multi-industry joint research are needed to eventually realize the commercial application of this deep underground coal gasification technology.