A Review on Sources,Extractions and Analysis Methods of a Sustainable Biomaterial:Tannins

Condensed and hydrolysable tannins are non-toxic natural polyphenols that are a commercial commodity industrialized for tanning hides to obtain leather and for a growing number of other industrial applications mainly to substitute petroleum-based products.They are a definite class of sustainable materials of the forestry industry.They have been in operation for hundreds of years to manufacture leather and now for a growing number of applications in a variety of other industries,such as wood adhesives,metal coating,pharmaceutical/medical applications and several others.This review presents the main sources,either already or potentially commercial of this forestry by-materials,their industrial and laboratory extraction systems,their systems of analysis with their advantages and drawbacks,be these methods so simple to even appear primitive but nonetheless of proven effectiveness,or very modern and instrumental.It constitutes a basic but essential summary of what is necessary to know of these sustainable materials.In doing so,the review highlights some of the main challenges that remain to be addressed to deliver the quality and economics of tannin supply necessary to fulfill the industrial production requirements for some materials-based uses.

Relation between Economic Development Level and Resource and Environment Carrying Capacity of Central Area of Yunnan Province Based on Decoupling Analysis

Based on the decoupiing theory and method, an indicator system was built for the relation between economic development level and resource and environment carrying capacity. And the study was carried out on decoupling degree and temporal changes of economic development level and resource and environment carrying ca- pacity in the central area of Yunnan Province. Results indicated that （i） the economic development level and resource and environment carrying capacity in the central area of Yunnan Province mainly experienced strong decoupling, weak decoupling, and ex- pansive negative coupling, and in general it was strong decoupling, and it took on re- verse ＂N＂ in temporal changes. （ii） Change rate of economic development level in the central area of Yunnan Province was greater than zero, but the amplitude of change was not large, while the change rate of resource and environment carrying capacity was negative in 2007-2008, and it was positive in the rest years; from 2007, it took on gradual expansion trend, and scissors difference gradually increased after experi- encing reverse ＂V＂ change. （iii） The strong decoupling was the main situation and it reached the peak value in T5 period and T6 pedod.

Source Separation of Diesel Engine Vibration Based on the Empirical Mode Decomposition and Independent Component Analysis

Vibration signals from diesel engine contain many different components mainly caused by combustion and mechanism operations,several blind source separation techniques are available for decomposing the signal into its components in the case of multichannel measurements,such as independent component analysis（ICA）.However,the source separation of vibration signal from single-channel is impossible.In order to study the source separation from single-channel signal for the purpose of source extraction,the combination method of empirical mode decomposition（EMD） and ICA is proposed in diesel engine signal processing.The performance of the described methods of EMD-wavelet and EMD-ICA in vibration signal application is compared,and the results show that EMD-ICA method outperforms the other,and overcomes the drawback of ICA in the case of single-channel measurement.The independent source signal components can be separated and identified effectively from one-channel measurement by EMD-ICA.Hence,EMD-ICA improves the extraction and identification abilities of source signals from diesel engine vibration measurements.

Finite element analysis of keyhole plasma arc welding based on an adaptive heat source mode

An adaptive heat source mode is proposed to account for the keyhole effect and the characteristics of volumetric distribution along the direction of the workpiece thickness. Finite element analysis of the temperature field in keyhole plasma arc welding is conducted and the weld geometry is obtained. The predicted results are in agreement with the measured ones.

Single channel source separation of radar fuze mixed signal based on phase difference analysis

A new method based on phase difference analysis is proposed for the single-channel mixed signal separation of single-channel radar fuze.This method is used to estimate the mixing coefficients of de-noised signals through the cumulants of mixed signals,solve the candidate data set by the mixing coefficients and signal analytical form,and resolve the problem of vector ambiguity by analyzing the phase differences.The signal separation is realized by exchanging data of the solutions.The waveform similarity coefficients are calculated,and the time鈥攆requency distributions of separated signals are analyzed.The results show that the proposed method is effective.

Neutronics analysis of a stacked structure for a subcritical system with LEU solution driven by a D-T neutron source for~(99)Mo production

The utilization of neutrons markedly affects the medical isotope yield of a subcritical system driven by an external D-T neutron source.The general methods to improve the utilization of neutrons include moderating multiplying,and reflecting neutrons,which ignores the use of neutrons that backscatter to the source direction.In this study,a stacked structure was formed by assembling the multiplier and the low-enriched uranium solution to enable the full use of neutrons that backscatter to the source direction and further improve the utilization of neutrons.A model based on SuperMC was used to evaluate the neutronics and safety behavior of the subcritical system,such as the neutron effective multiplication factor,neutron energy spectrum,medical isotope yield,and heat deposition.Based on the calculation results,when the intensity of the neutron source was 59×10^(13)n/s,the optimized design with a stacked structure could increase the yield of ^(99)Mo to182 Ci/day,which is approximately 16% higher than that obtained with a single-layer structure.The inlet H_(2)O coolant velocity of 1.0 m/s and initial temperature of 20℃ were also found to be sufficient to prevent boiling of the fuel solution.

Dynamic character analysis for the arc welding power source based on fuzzy logic

A lot of experimental methods have been brought forth to assess the dynamic character of the arc welding power source, but up to now, this issue has not been solved very well. In this paper, based on the fuzzy logic reasoning method, a dynamic character assessing model for the arc welding power source was established and used to analyze the dynamic character of the welding power source. Three different types of welding machine have been tested, and the characteristic information of the electrical signals such as re-striking arc voltage, low welding current and so on of the welding process were extracted accurately by using a self-developed welding dynamic arc wavelet analyzer. The experimental results indicate that this model can be used as a new assessing method for the dynamic character of the arc welding power source.

Improved seismoacoustic analysis model and its application to source parameter inversion of near-surface small-yield chemical explosions

The seismoacoustic analysis method has broad potential applications to source parameter estimation for near-surface explosion events such as industrial explosions and terrorist attacks.In this study,current models were improved by modifying the acoustic model and adopting the Bayesian Markov-chain-Monte-Carlo inversion method.The source parameters of near-surface small-yield chemical explosions were analyzed via the improved seismoacoustic analysis model and by the estimation accuracy of seismoacoustic joint inversion.Estimation and analysis results showed that the improved seismoacoustic analysis model considered ground shock coupling and the impact of explosion products ejecting from the surface so that the improved acoustic impulse relation was more consistent with the measured data than the Ford impulse relation.It is suitable for deep-burial,shallow-burial,and near-surface aerial explosions.Furthermore,trade-off relationships were declined through the application of the improved model to source parameter inversion for near-surface small-yield chemical explosions,and source parameter estimation accuracy was improved.

Physics Analysis and Optimization Studies for a Fusion Neutron Source Based on a Gas Dynamic Trap

To further investigate the fusion neutron source based on a gas dynamic trap （GDT）, characteristics of the GDT were analyzed and physics analyses were made for a fusion neutron source based on the GDT concept. The prior design of a GDT-based fusion neutron source was optimized based on a refreshed understanding of GDT operation. A two-step progressive development route of a GDT-based fusion neutron source was suggested. Potential applications of GDT are discussed. Preliminary analyses show that a fusion neutron source based on the GDT concept is suitable for plasma-material interaction research, fusion material and subcomponent testing, and capable of driving a proof-of-principle fusion fission hybrid experimental facility.

The numerical analysis of thermal effect and weld shaping of DE-GMAW under composite heat source

The action of the composite heat source model in DE-GMAW has been carried out according to the characteristics of the DE-GMA W process, and the distribution of surface and body heat source was analyzed. The weld temperature field distribution has been derived from the appropriate boundary conditions and the thermal physical property parameters by COMSOL software. The effects of the positions of the surface and body heat source on the cross- sectional shape were investigated by studying the experimental welding thermal cycle curve. The simulated results are fully compliant with the experimental data under the same conditions. This illustrates that the composite heat source model is correct. It reflects the thermal mechanism of DE-GMA W process, and reveals the internal influence of weld shaping.

Theoretical analysis method for Howland current source design

The Howland current source （HCS） circuit is commonly used, e.g. in electrical impedance tomography （EIT） sys tems. It is important to optimise the design parameters, such as the output impedance, bandwidth, current stability and load range. While many people have used this circuit, it has not been systematically analysed. In this paper, a numerical method is proposed to analyse the characteristics of HCS. Based on a nonideal opamp model, general formulas and simplified for mulas for calculating the output impedance and the closeloop gain of HCS are deduced. From these formulas, the practical formulas are chosen and their effectiveness has been proven by analysis and experiment. The output impendence of two HCS circuits based on t^A741 and LM6365 are compared. The magnitudefrequency response and the relationship between the cur rent and the load of HCS are discussed.

Analysis of Sources of Atmospheric Fine Particulates in Nan'ao County

Based on on-line single particle aerosol mass spectrometry （SPAMS） with high time resolution, the sources of atmospheric fine particu- late matter in Nan＇ao County were analyzed. The results showed that during the monitoring period from March 24 to 27 in 2015, the primary source of fine particulate matter in Nao＇ao County was motor vehicle exhaust, that is, 24.7% of fine particulates were from motor vehicle exhaust, followed by biomass burning （17.2%）, fire coal （17.2%）, and sea salt （13.3%）. The proportions of fire coal and sea salt revealed the peculiarity of sources of atmospheric fine particulate matter in Nan＇ao County. Therefore, it is suggested that some measures should be adopted to limit tourist traffic to reduce the adverse impact of motor vehicle exhaust on ambient air quality in Nan＇ao County.

Source Apportionment of Ambient PM_(10) in the Urban Area of Longyan City,China:a Comparative Study Based on Chemical Mass Balance Model and Factor Analysis Method

In order to identify the day and night pollution sources of PM10 in ambient air in Longyan City,the authors analyzed the elemental composition of respirable particulate matters in the day and night ambient air samples and various pollution sources which were collected in January 2010 in Longyan with inductivity coupled plasma-mass spectrometry（ICP-MS）.Then chemical mass balance（CMB） model and factor analysis（FA） method were applied to comparatively study the inorganic components in the sources and receptor samples.The results of factor analysis show that the major sources were road dust,waste incineration and mixed sources which contained automobile exhaust,soil dust/secondary dust and coal dust during the daytime in Longyan City,China.There are two major sources of pollution which are soil dust and mixture sources of automobile exhaust and secondary dust during the night in Longyan.The results of CMB show that the major sources are secondary dust,automobile exhaust and road dust during the daytime in Longyan.The major sources are secondary dust,soil dust and automobile exhaust during the night in Longyan.The results of the two methods are similar to each other and the results will guide us to plan to control the PM10 pollution sources in Longyan.

Analysis of Pollution Sources and Countermeasures against Water Pollution in a Small River Basin of Chaohu Lake——A Case Study of the Shiwulihe River

The Shiwulihe River, the inflow river of Chaohu Lake in Hefei City, was taken as an example. Based on the current status of water quali- ty and analysis of pollution sources in the Shiwulihe River, countermeasures and suggestions of controlling water pollution were proposed to provide effective ways for the control of water pollution and restoration of aquatic ecosystem in the Shiwulihe River and other similar rivers flowing into lakes.

Underdetermined Blind Mixing Matrix Estimation Using STWP Analysis for Speech Source Signals

Wavelet packets decompose signals in to broader components using linear spectral bisecting. Mixing matrix is the key issue in the Blind Source Separation (BSS) literature especially in under-determined cases. In this paper, we propose a simple and novel method in Short Time Wavelet Packet (STWP) analysis to estimate blindly the mixing matrix of speech signals from noise free linear mixtures in over-complete cases. In this paper, the Laplacian model is considered in short time-wavelet packets and is applied to each histogram of packets. Expectation Maximization (EM) algorithm is used to train the model and calculate the model parameters. In our simulations, comparison with the other recent results will be computed and it is shown that our results are better than others. It is shown that complexity of computation of model is decreased and consequently the speed of convergence is increased.

Mechanical Analysis and Measurements of a Multicomponent NbTi/Cu Superconducting Magnets Structure for the Fully Superconducting Electron Cyclotron Resonance Ion Source

A fully superconducting electron cyclotron resonance （ECR） ion source （SECRAL ID is currently being built in the Institute of Modern Physics, Chinese Academy of Sciences. Its key components are three superconducting solenoids （Nb-Ti/Cu） and six superconducting sextupoles （Nb-Ti/Cu）. Different from the conventional supercon- ducting ECR magnetic structure, the SEC17AL Ⅱ includes three superconducting solenoid coils＇ that are located inside the superconducting sextupoles. The SECRAL Ⅱ can significantly reduce the interaction forces between the sextupole and the solenoids, and the magnets can also be more compact in size. For this multi-component SECRAL Ⅱ generating its self field of -8 T and being often exposed to the high self field, the mechanical analysis has become the main issue to keep their stress at 〈200 MPa on coils. The analytical and experimental results in mechanics are presented in the SECRAL Ⅱ structure. To improve the accuracy and efficiency of analysis, according to the composite rule of micromechanics, the equivalent uniform windings are used to simulate the epoxy-impregnated Nb-Ti/Cu coils. In addition, using low temperature strain gauges and a wireless fast strain acquisition system, a fundamental experiment on the based on our analysis, the stresses and deformations optimized. strains developments of a sextupole is reported. Finally, for its assembly of each SECRAL Ⅱ coil will be further

A Research for Regional Contribution Rate of Internal Source and External Source of PM_(2.5) Based on Set Pair Analysis Method

A problem of the air pollution control in China is getting to know a regional contribution rate of internal and external source of PM2.5. In this paper,Set Pair Analysis（ SPA） method is proposed to calculate the contribution rate of PM2.5in Dongguan City. Due to geographic,meteorological factors and the low concentration of air pollutants in Qingxi area,the PM2.5in this place is mainly contributed by the regional transport of air pollutants from other inside areas of Dongguan,and less affected by the outside of Dongguan. So the concentration of PM2.5in Qingxi area can reflect the Dongguan＇s basic background concentration of PM2.5. On the basis of the basic background concentration,firstly the concentration of each pollutant components is divided into the internal part and the mixed part. Secondly using the source apportionment samples of five monitoring sites in Dongguan we can respectively construct a sample set A and an evaluation set B. Thirdly the SPA is operated onto the mixed part in terms of set B.At last the connection degree between the concentration of each pollutant components and external source and internal source will be calculated,that is the contribution rate. The research reveals that the contribution rate of internal source and external source of PM2.5in Dongguan City is 83%and 17% respectively,which roughly met expectations. This method is simple and effective and it can provide a reference for the government taking reduction measures to control PM2.5pollutants emission.

Using Grey Relational Analysis to Evaluate Different Influencing Factors on Aquifer Parameters Variations with Groundwater Source Heat Pump Operation

The influence of particle migration induced by groundwater source heat pump( GWSHP) operation on aquifer parameters was theoretically analyzed. Then the sensitivity analysis of different influencing factors,which influenced aquifer parameters with GWSHP operation,was evaluated by using grey relational analysis method through a case study. The present study indicated that the erosion parameter, hydraulic conductivity and initial concentration were critical influencing factors which affected the aquifer parameters and the suitability of GWSHP. It also indicated that the discharge of single well should be controlled and the diameter of single well should be selected appropriately in order to decrease particle migration.

Stability Analysis on Power System with Large Power Source

In this paper, the stability problems of power systems with large power source are analyzed with viewpoint of energy balance. The phenomena are studied when the energy delivery are “blocked” by faults that occur on some key transmission lines of a large power source within a power system, on the transmission lines between the interconnected power systems, or on some key buses. The cases are based on a practical power system and its interconnected systems.

Inversion method for multi-point source pollution identification:Sensitivity analysis and application to European Tracer Experiment data

Fast and accurate identification of unknown pollution sources plays a crucial role in the emergency response and source control of air pollution.In this work,the applicability of a previously proposed two-step inversion method is investigated with sensitivity experiments and real data from the first release of the European Tracer Experiment(ETEX-1).The two-step inversion method is based on the principle of least squares and carries out additional model correction through the residual iterative process.To evaluate its performance,its retrieval results are compared with those of two other existing algorithms.It is shown that for those cases with richer measurements,all three methods are less sensitive to errors,while for cases where measurements are sparse,their retrieval accuracy will rapidly decrease as errors increase.From the results of sensitivity experiments,the new method provides higher estimation accuracy and a more stable performance than the other two methods.The new method presents the smallest maximum location error of 18.20 km when the amplitude of the measurement error increases to 100%,and 22.67 km when errors in the wind fields increase to 200%.Moreover,when applied to ETEX-1 data,the new method also exhibits good performance,with a location error of 4.71 km,which is the best estimation with respect to source location.