Magmatic-hydrothermal Evolution and Mineralization Mechanisms of the Wangjiazhuang Cu(-Mo)Deposit in the Zouping Volcanic Basin,Shandong Province,China:Constraints from Fluid Inclusions

The Wangjiazhuang Cu(-Mo)deposit,located within the Zouping volcanic basin in western Shandong Province,China,is unique in this area for having an economic value.In order to expound the metallogenetic characteristics of this porphyry-like hydrothermal deposit,a detailed fluid inclusion study has been conducted,employing the techniques of representative sampling,fluid inclusion petrography,microthermometry,Raman spectroscopy,LA-ICP-MS analysis of single fluid inclusions,as well as cathode fluorescence spectrometer analysis of host mineral quartz.The deposit contains mainly two types of orebodies,i.e.veinlet-dissemination-stockwork orebodies in the K-Si alteration zone and pegmatiticquartz sulfide veins above them.In addition,minor breccia ore occurs locally.Four types of fluid inclusions in the deposit and altered quartz monzonite are identified:L-type one-or two-phase aqueous inclusions,V-type vapor-rich inclusions with V/L ratios greater than 50%-90%,D-type multiphase fluid inclusions containing daughter minerals or solids and S-type silicate-bearing fluid inclusions containing mainly muscovite and biotite.Ore petrography and fluid inclusion study has revealed a three-stage mineralization process,driven by magmatic-hydrothermal fluid activity,as follows.Initially,a hydrothermal fluid,separated from the parent magma,infiltrated into the quartz monzonite,resulting in its extensive K-Si alteration,as indicated by silicate-bearing fluid inclusions trapped in altered quartz monzonite.This is followed by the early mineralization,the formation of quartz veinlets and dissemination-stockwork ores.During the main mineralization stage,due to the participation and mixing of meteoric groundwater with magmatic-sourced hydrothermal fluid,the cooling and phase separation caused deposition of metals from the hydrothermal fluids.As a result,the pegmatitic-quartz sulfide-vein ores formed.In the late mineralization stage,decreasing fluid salinity led to the formation of L-type aqueous inclusions and chalcopyrite-sulfosalt ore.Coexistence of V-type and D-type inclusions and their similar homogenization temperatures with different homogenization modes suggest that phase separation or boiling of the ore-forming fluids took place during the early and the main mineralization stages.The formation P-T conditions of S-type inclusions and the early and the main mineralization stages were estimated as ca.156-182 MPa and 450-650℃,350-450℃,18-35 MPa and 280-380℃,8-15 MPa,respectively,based on the microthermometric data of the fluid inclusions formed at the individual stages.

Genesis of the Jianbeigou Gold Deposit on the Southern Margin of the North China Craton: Insights from Fluid Inclusions, H-O-S Isotopes, and Pyrite in situ Trace Element Analyses

The Jianbeigou gold deposit is a typical lode gold deposit in the Qinling metallogenic belt, located on the southern margin of the North China Craton. Three stages of the hydrothermal process can be distinguished, including the quartz ± pyrite, quartz-polymetallic sulfide, and quartz-carbonate ± pyrite stages. From the early to late stages, the homogenization temperatures of primary fluid inclusions are 281–362°C, 227–331°C, and 149–261°C, respectively. The corresponding salinities estimated for these fluids are 3.9–9.9 wt%, 0.4–9.4 wt%, and 0.7–7.2 wt% Na Cl equiv. Combined with laser Raman spectroscopy data, the ore-forming fluid belongs to a H_(2)O-CO_(2)-Na Cl ± CH_4 system with medium–low temperature and salinity. The δ~(18)Ofluid and δD values for the quartz veins are-1.0‰ to 6.0‰ and-105‰ to-84‰, respectively, which indicates that the ore-forming fluid is of mixed source, mainly derived from magma, with a contribution from meteoric water. Pyrite has been identified into three generations based on mineral paragenetic sequencing, including Py1, Py2, and Py3. The pyrites have δ~(34)S sulfur isotopic compositions from three stages between 3.7‰ and 8.4‰, indicating that sulfur mainly originated from magma. Te, Bi, Sb, and Cu contents in pyrite were all high and showed a strong correlation with Au concentrations. Native gold and the Au-Ag-Bi telluride minerals were formed concurrently, and the As concentration was low and decoupled from the Au content. Therefore, Te, Bi, Sb and other low-melting point chalcophile elements play an important role for gold mineralization in arsenic-deficient ore-forming fluid. Combined with the geological setting, evolution of pyrite, and ore-fluids geochemistry, we propose that the Jianbeigou deposit can be classified as a magmatic–hydrothermal lode gold deposit. Gold mineralization on the southern margin of the North China Craton is related to Early Cretaceous magmatism and formed in an extensional setting.

Sequential extraction and compositional analysis of oil-bearing fluid inclusions in reservoir rocks from Kuche Depression, Tarim Basin

The free oils, adsorbed oils and oil-bearing fluid inclusions have been extracted separately and analyzed by GC and GC-MS in reservoir rock samples collected from the Kuche Depression. The results demonstrate that the molecular compositions of oil-bearing fluid inclusions are significantly different from those of the free oils (the current oils). Compared with the current oil, the oil-bearing fluid inclusions are characterized by relatively high values of parameters Pr/nC17 and Ph/nC18, low values of Pr/Ph, hopanes/steranes, C30-diahopane/C30-hopane and Ts/Tm, low content of C29Ts terpane and high maturities as indicated by C29 steranes 20S/(20R+20S). In addition, the oil-bearing fluid inclusions correlate very well with the oils in northern and central Tarim Basin, which were derived from Cambrian-Ordovician marine source rocks. The adsorbed oils appear to be an intermediate type between free oils and oil-bearing fluid inclusions. The above analytical data indicate that there are at least two

Oil-bearing fluid inclusions from the Palaeoproterozoic:A review of biogeochemical results from time-capsules >2.0 Ga old

The observation of oil inclusions trapped prior to 2.0 Ga in Palaeoproterozoic rocks and the ability to obtain detailed molecular geochemical information from them provide a robust way for understanding the early biogeochemical evolution of the Earth. Oil

Infrared microthermometry of fluid inclusion in sphalerite:A case study of the Xinqiao deposit in the Middle-Lower Yangtze metallogenic belt

Infrared microthermometry allows direct measurement of fluid inclusions hosted in opaque ore minerals and can provide direct constraints on the evolution of ore-forming fluids.This study presents infrared microthermometry of spherite-hosted fluid inclusions from the Xinqiao deposit in the Middle-Lower Yangtze Metallogenic Belt and sheds new light on the ore genesis of the deposit.Considering that infrared light may lead to non-negligible temperature deviations during microthermometry,some tests were first conducted to ensure the accuracy of the microthermometric measurements.The measurement results indicated that using the lowest light intensity of the microscope and inserting an optical filter were effective in minimizing the possible temperature deviations of infrared microthermometry.All sphalerite-hosted fluid inclusions from the Xinqiao deposit were aqueous.They show homogenization temperature ranging from~200 to 350℃,but have two separate salinity groups(1.0 wt%-10 wt%and 15.1 wt%-19.2 wt%NaCl equivalent).The low-salinity group represents sedimentary exhalative(SEDEX)-associated fluids,whereas the high-salinity group results from modification by later magmatic hydrothermal fluids.Combined with published fluid inclusion data,the four-stage fluid evolution of the Xinqiao deposit was depicted.Furthermore,our data suggest that the Xinqiao deposit was formed by twostage metallogenic events including SEDEX and magmatic-hydrothermal mineralization.

Microthermometry and Synchrotron Radiation X-ray Fluorescence Analysis of Fluid Inclusions in the Dongping Gold Deposit,Northern Margin of the North China Craton

To shed light on the genesis of the Dongping deposit and reveal the behaviour of CO_(2),Au and other ore elements(e.g.,Cu,Fe,Zn,As,Sb,Co etc.)in ore-forming fluids,petrographic,microthermometric and synchrotron radiation X-ray fluorescence(SRXRF)analyses of fluid inclusions were conducted.The ore-forming fluid is characterized as an H_(2)O-CO_(2)-NaCl system with medium-high temperatures and low salinity.Four mineralization stages are identified,namely,feldsparquartz(stage 1);pyrite-white quartz(stage 2);sulfide-smoky grey quartz(stage 3);and carbonate-quartz(stage 4).Three types of inclusions were distinguished,based on fluid composition,phase assemblages and mode of homogenization.Type A:H_(2)O-rich fluid inclusions show 2 phases(liquid H_(2)O(LH_(2)O)+vapour H_(2)O(VH_(2)O))at room temperature and homogenize to the liquid phase.Type B:H_(2)O-CO_(2)fluid inclusions contain 2–3 phases(liquid H_(2)O(LH_(2)O)+vapour CO_(2)(VCO_(2));liquid H_(2)O(LH_(2)O)+liquid CO_(2)(LCO_(2)));liquid H_(2)O(LH_(2)O)+liquid CO_(2)(LCO_(2))+vapour CO_(2)(VCO_(2)))at room temperature and homogenized to the liquid H_(2)O phase.Type C:H_(2)O-CO_(2)fluid inclusions show 2 phases(liquid H_(2)O(LH_(2)O)+liquid CO_(2)(LCO_(2))at room temperature and homogenize to a critical state.CO_(2)is clearly more enriched in the fluid inclusions of stages 2 and 3 than in stage 1.Stage 1 is dominated by type A(H_(2)O-rich)inclusions with homogenization temperatures(Th)of 220–359℃and salinities of 1.1–3.1 wt%NaCl equivalent.Type B(CO_(2)-rich)inclusions gradually increase in stages 2 and 3.The Th range of type B inclusions in stage 2 is 241–397℃with salinities of 2.2–6.9 wt%NaCl equivalent;the Th range of type A inclusions is 217–373℃with salinities of 1.2–8.1 wt%NaCl equivalent.The Th range of type B inclusions in stage 3 is 215–361℃with salinities of 2.9–6.1 wt%NaCl equivalent;the range of type A inclusions is 158–351℃with a salinity of 0.7–5.5 wt%NaCl equivalent.Stage 4 is characterized by type A with Th of 151–250℃and salinities of 0.9–8.3 wt%NaCl equivalent.The mapping results show that elements As,Te and Sb are more concentrated in vapour CO_(2)than in liquid H_(2)O at room temperature,which suggests that vapour components are more able to transport elements when phase separation occurs.The SRXRF quantitative results show that Au,Cl,S and some other metals are obviously more enriched in the fluid inclusions of stages 2 and 3 than those in stage 1.Additionally,the contents of S in stages 1–3 are much lower than those of Cl,which suggests that gold might migrate mainly in the form of a gold-chloride complex.Au is more enriched in type B fluid inclusions than in type A fluid inclusions,which suggests that the enrichment and migration of gold are closely related to CO_(2)and CO_(2)plays a critical role in the migration and enrichment of gold.The trace elements in the fluid have a similar change trend to those in the Yanshanian syenogranite distributed in the southeastern part of the mining area,which may provide some evidence for an intrusion-related genesis for the Dongping gold deposit.

Utility of fluid inclusion paleo-temperature in petroleum system modelling:A case study from western offshore,India

The paleo-temperature(Th)data from fluid inclusions are utilized for thermal history modelling using PetroMod software.Generally,bottom hole temperature(BHT)and vitrinite reflectance(Ro)measurements are widely used in petroleum system modelling(PSM)in the oil industry for calibration purposes.Th representing the minimum temperature of fluid entrapment estimated from fluid-inclusion study provides extra support to build the thermal models for PSM.Fluid inclusion parameters along with Rock-Eval pyrolysis analysis have been used to predict the maturity of oil in terms of API gravity as well as the maturity of source rocks respectively.Two exploratory wells RV-1(Mumbai Offshore Basin)and KK4C-A-1(Kerala-Konkan Offshore Basin),India were examined and the T_(h)from most of the fluid inclusions of wells RV-1 and KK4C-A-1 fell in the oil window range of 60-140℃suggesting thermal conditions favourable for oil generation in both of the wells.T_(h)of coeval aqueous inclusions along with the Hydrocarbon Fluid inclusions(HCFIs)was used to calibrate PSM.Vital parameters show that source rocks of well RV-1 are mature and that of well KK4C-A-1 are immature.Two sets of PSM are created in terms of generation and expulsion for the dry wells RV-1 and KK4C-A-1 and calibrated each well using fluid inclusion Th and BHT.From the fluid inclusion analysis method,it is evident that hydrocarbon generation happened in both wells and the paleo-temperature indicates that the formations of both wells were subjected to temperatures in the oil window range,even though it was designated as dry wells in the present scenario.The present study highlights the application of fluid inclusion paleo-temperature(Th)during calibration instead of commonly used methods.We could obtain desirable and accurate data output from PSM using T_(h) calibration.

Geochemistry,Fluid Inclusions and Sulfur Isotopes of the Goshgarchay Cu-Au Deposit(Western Azerbaijan)in Lesser Caucasus:Implications for the Origins of Ore-forming Fluids

The Goshgarchay Cu-Au deposit is located in the central part of the northwest flank of the Murovdagh region in the Lesser Caucasus.The Goshgarchay Cu-Au deposit is associated with Middle Jurassic volcanic and Late Jurassic-Early Cretaceous high-K calc-alkaline intrusive rocks.The Cu-Au mineralization is commonly related to quartz-sericite-chlorite alteration dominantly composed of chalcopyrite,gold,sphalerite,pyrite,bornite,hematite,covellite,chalcocite,malachite,and azurite.The Goshgarchay copper-gold deposit,which is 600 m wide and approximately 1.2 km long,is seen as a faultcontrolled and vein-,stockwork-and disseminated type deposit.The Goshgarchay Cu-Au deposit predominantly comprises Cu(max.64500 ppm)and Au(max.11.3 ppm),while it comprises relatively less amounts Zn(max.437 ppm),Mo(max.47.5 ppm),Pb(max.134 ppm),and Ag(max.21 ppm).The homogenization temperatures and salinities of fluid inclusions in quartz for stage Ⅰ range from 380℃ to 327℃,and 6.9 wt% to 2.6 wt% NaCl eq.,respectively.Thand salinities in quartz for stage Ⅱ range from 304℃ to 253℃,and 7.6 wt% to 3.2 wt% NaCl eq.,respectively.The calculated δ^(34)S_(h2s)values(-1.5‰ to 5.5‰)of sulfides and especially the narrow range of δ^(34)S_(h2s) values of chalcopyrite and bornite(between -0.07‰ and +0.7‰)indicate that the source of the Goshgarchay Cu-Au mineralization is magmatic.Based on the mineralogical,geochemical,fluid inclusion,and sulfur isotopic data,the Goshgarchay Cu-Au deposit represents a late stage peripheral magmatic-hydrothermal mineralization probably underlain by a concealed porphyry deposit.

Mineralization of the Liwu large-scale stratiform copper deposits in Sichuan Province, China: Constraints from fluid inclusions

The Liwu stratiform copper deposit is located in the northwestern Jianglang dome,western China.Current studies mainly focus on the genetic type and mineralization of this deposit.Detailed fluid inclusion characteristics of metallogenic period quartz veins were studied to reveal the ore-forming fluid features.Laser Raman analysis indicates that the ore-forming fluids is a H_(2)O-NaCl-CH_(4)(-CO_(2))system.Fluid inclusions microthermometry shows a homogenization temperature of 181-375°C and a salinity of 5.26%-16.99%for the disseminated-banded Cu-Zn mineralization;but a homogenization temperature of 142-343°C and a salinity of 5.41%-21.19%for the massive-veined Cu-Zn mineralization.These features suggest a medium-high temperature and a medium salinity for the ore-forming fluids.H-O isotopic data indicates that the ore-forming fluids were mainly from the metamorphic and magmatic water,plus minor formation water.And sulfur isotopic data indicates that sulfur was mainly derived from the formation and magmatic rocks.Metallogenesis of the disseminated-banded mineralization was mainly correlated with fluid mixing and water-rock reaction;whereas that of the massive-veined mineralization was mainly correlated with fluid boiling.The genetic type of the deposit is a medium-high temperature hydrothermal deposit related to magmatism and controlled by shear zones.This study is beneficial to understand the stratiform copper deposit.

Geochemical characteristics of temperature and pressure of Paleozoic reservoir fluid inclusions in Xuanjing region, Lower Yangtze area

In order to understand the geochemical characteristics of Paleozoic reservoir fluids in Xuanjing region,Lower Yangtze area,drilling core samples from Y and D wells were tested and analyzed to study the fluid inclusion types and composition.Pressure correction was undertaken to determine the temperature and pressure environment for inclusion formation,and the influence of fluid characteristics of the Upper Permian and Lower Triassic reservoirs on the preservation of shale gas was investigated.According to petrograph-ic observations,fluid inclusions are mainly brine and bitumen inclusions.Bitumen inclusions are mainly distributed in holes and fractures,and with smaller individuals.No visible fluorescence was observed,and the vitrinite reflectance is 3.39%–3.92%.This indicates that there had been oil and gas accumulation in the early stage of diagenesis in the study area,but due to the influence of magmatic hydrothermal solution,oil and gas underwent thermal metamorphism in the early stage,making liquid petroleum into solid bitumen.At present,oil and gas in the reservoir were largely formed in the late stage.During the continuous process in which shale was buried,light oil and gas were generated.Light oil and gas underwent magmatic and tectonic hydrothermal processes in some areas,resulting in high-temperature metamorphic cracking that formed dry gas.Moreover,nitrogen inclusions are found in fluid inclusions,forming metamorphic fluids caused by mag-matic hydrothermal activities.The study shows that Paleozoic reservoirs in Xuanjing area are characterized by self-generation and self-storage.Furthermore,the mechanism of shale gas accumulation is not only related to the buried hydrocarbon generation process of shale itself,but is also related to later magmatic activity and tectonic hydrothermal transformation.Therefore,preservation conditions are generally key factors of shale gas accumulation in this area.

Decipher hydrocarbon generation and accumulation based on fluid inclusion and chronology:A case study from the Upper Paleozoic buried-hills in Huanghua Depression,Bohai Bay Basin

Deciphering hydrocarbon generation and accumulation stage is of significance to understand oil and gas evolution and seek exploration targets.Taking the Upper Paleozoic buried-hills in the Huanghua Depression,Bohai Bay Basin,as a case study,hydrocarbon generation environment and detailed accumulation process are revealed by fluid inclusions observations,Laser Raman spectroscopy,Fourier Infrared spectroscopy,and K-Ar isotope measurements.The results show that both oil and gas inclusion were captured in the quartz overgrowth,dissolved feldspar and calcite microfractures,showing blue to dark brown fluoresce.The grains containing oil inclusions index(GOI)of oil,oil&gas and gas being 25%,65%,and 10%and the inclusions with abundant methyl groups and short chains,both indicate high thermal maturity.One series of fluids inclusion is generally observed,evidenced by the concentrated homogenization temperature of 135-145℃ and salinity of 3%-15 w.t.%NaCl equiv,indicating one primary charging stage.The gas and gas&liquid inclusions mainly contain CH_(4),with also peaks indicating CO_(2) and N_(2.)The Carboniferous and Permian biomarkers show reducing environment with brackish water,with organic matter sources both from marine and continental.The relative content ofααα20RC_(27),ααα20RC_(28),andααα20RC_(29) exhibit source contributions both from algae and higher plants,and mainly of II2 to III kerogen.Both coal derived gas and oil associated hydrocarbons are identified from most of the buried-hills.Combining the fluid homogenization temperature and salinity,as well as the thermal evolution history,the hydrocarbon generated from the Upper Paleozoic was concentrated at the end of the Eocene(40 Ma±),while the beginning of charging is 60 Ma±.The Wumaying Buried-hill is of only coal derived gas and has potential for inner coal measure natural gas exploration.The results provide a detailed understanding of hydrocarbon accumulations in the study area,which can also be reference for improving petroleum exploration efficiency in similar basins.

Fluid Inclusions of Calcite and Sources of Ore-forming Fluids in the Huize Zn-Pb-(Ag-Ge) District, Yunnan, China

The Huize Zn-Pb- (Ag-Ge) district is a typical representative of the well-known medium-to large-sized carbonate-hosted Zn-Pb- (Ag-Ge) deposits, occurring in the Sichuan-Yunnan-Guizhou Pb-Zn Ore-forming Zone. Generally, fluid inclusions within calcite, one of the major gangue minerals, are dominated by two kinds of small (1-10 um) inclusions including pure-liquid and liquid. The inclusions exist in concentrated groups along the crystal planes of the calcite. The ore-forming fluids containing Pb and Zn, which belong to the Na+-K+-Ca2+-Cl--F--SO42- type, are characterized by temperatures of 164-221℃, medium salinity in 5-10.8 wt% NaCl, and medium pressure at 410×105 to 661×105 Pa. The contents of Na+-K+ and C1--F-, and ratios of Na+/K+-Cl-/F- in fluid inclusions present good linearity. The ratios of Na+/K+ (4.66-6.71) and Cl-/F- (18.21-31.04) in the fluid inclusions of calcite are relatively high, while those of Na+/K+ (0.29-5.69) and Cl-/F- (5.00-26.0) in the inclusions of sphalerite and pyrite are relatively low. The ratio of Na+/K+ increases in accord with those of Cl-/F-, which indicates that ore-forming fluid of deep source participates in the mineralization. The waters of fluid inclusions have δD values from -43.5‰ to -55.4‰ of calcite. The δ18OV-SMOW values of the ore-forming fluids, calculated values, range from 17.09‰ to 18.56‰ of calcite and 17.80‰ to 23.14‰ for dolomite. δ13CV-PDB values range from -1.94‰ to -3.31‰ for calcite and -3.35‰ to 0.85‰ for the ore-bearing dolomite. These data better demonstrate that the ore-forming fluids were mainly derived from metamorphic water and magmatic hot fluid, in relation to the metamorphism of the Kunyang Group in the basement and magmatic hydrothermalism. The deposit itself might have resulted from ascending cycles of ore-forming fluid, enriched in Pb and Zn. The Huize Zn-Pb- (Ag-Ge) deposits related to carbonate-hosted Zn-Pb sulphides.

In situ Raman spectroscopic quantification of CH4–CO2 mixture: application to fluid inclusions hosted in quartz veins from the Longmaxi Formation shales in Sichuan Basin, southwestern China

We re-evaluate the Raman spectroscopic quantification of the molar ratio and pressure for CH4–CO2 mixtures.Firstly,the Raman quantification factors of CH4 and CO2 increase with rising pressure at room temperature,indicating that Raman quantification of CH4/CO2 molar ratio can be applied to those fluid inclusions(FIs)with high internal pressure(i.e.,>15 MPa).Secondly,the v1(CH4)peak position shifts to lower wavenumber with increasing pressure at constant temperature,confirming that the v1(CH4)peak position can be used to calculate the fluid pressure.However,this method should be carefully calibrated before applying to FI analyses because large discrepancies exist among the reported v1(CH4)-P curves,especially in the highpressure range.These calibrations are applied to CH4-rich FIs in quartz veins of the Silurian Longmaxi black shales in southern Sichuan Basin.The vapor phases of these FIs are mainly composed of CH4 and minor CO2,with CO2 molar fractions from4.4%to 7.4%.The pressure of single-phase gas FI ranges from 103.65 to 128.35 MPa at room temperature,which is higher than previously reported.Thermodynamic calculations supported the presence of extremely high-pressure CH4-saturated fluid(218.03–256.82 MPa at 200°C),which may be responsible for the expulsion of CH4 to adjacent reservoirs.

He-Ar Isotopic Systematics of Fluid Inclusions in Pyrites from PGEpolymetallic Deposits in Lower Cambrian Black Rock Series, South China

He-Ar isotopic compositions of fluid inclusions trapped in pyrites from some representative PGE-polymetallic deposits in Lower Cambrian black rock series in South China were analyzed by using an inert gas isotopic mass spectrometer. The results show that the ore-forming fluids possess a low 3He/4He ratio, varying from 0.43×10-8 to 26.39×10-8, with corresponding R/Ra value of 0.003-0.189. The 40Ar/36Ar ratios are 258-287, close to those of air saturated water (ASW). He-Ar isotopic indicator studies show that the ore-forming fluids were mainly derived from the formation water or basinal hot brine and sea water, while the content of mantle-derived fluid or deep-derived magmatic water might be negligible. The PGE-polymetallic mineralization might be related to the evolution of the Caledonian miogeosynclines distributed along the southern margin of the Yangtze Craton. During the Early Cambrian, the formation water or basinal hot brine trapped in Caledonian basins which accumulated giant thick sediments was expelled and migrated laterally along strata because of the pressure generated by overlying sediments. The basinal hot brine ascended along faults, mixed with sea water and finally deposited ore minerals.

Decrepitation Thermometry and Compositions of Fluid Inclusions of the Damoqujia Gold Deposit,Jiaodong Gold Province,China:Implications for Metallogeny and Exploration

The recently discovered Damoqujia （大磨曲家） gold deposit is a large shear zone-hosted gold deposit of disseminated sulphides located in the north of the Zhaoping （招平） fault zone, Jiaodong （胶东） gold province, China. In order to distinguish the temperature range of cluster inclusions from different mineralization stages and measure their compositions, 16 fluid inclusions and 5 isotopic geochemistry samples were collected for this study. Corresponding to different mineralization stages, the multirange peaks of quartz decrepitation temperature （250-270, 310-360 and 380-430℃） indicate that the activity of ore-forming fluids is characterized by multistage. The ore-forming fluids were predominantly of high-temperature fluid system （HTFS） by CO2-rich, and SO4^2--K^＋ type magmatic fluid during the early stage of mineralization and were subsequently affected by low-temperature fluid system （LTFS） of CH4-rich, and Cl^--Na^＋/Ca^2＋ type meteoric fluid during the late stage of mineralization. Gold is transferred by Au-HS^- complex in the HTFS, and Au-Cl^- complex can be more important in the LTFS. The transition of fluids from deeper to shallow environments results in mixing between the HTFS and LTFS, which might be one of the most key reasons for gold precipitation and large-scale mineralization. The ore-forming fluids are characterized by high-temperature, strong-activity, and superimposed mineralization, so that there is a great probability of forming large and rich ore deposit in the Damoqujia gold deposit. The main bodies are preserved and extend toward deeper parts, thereby suggesting a great potential in future.

Mineralization Styles and Genesis of the Yinkeng Au-Ag-Pb-Zn-Cu-Mn Polymetallic Orefield, Southern Jiangxi Province, SE China: Evidence from Geology, Fluid Inclusions, Isotopes and Chronology

The Yinkeng orefield in Yudu County,Jiangxi Province,SE China,is a zone of concentrated Au-Ag-Pb-Zn-Cu-Mn polymetallic ores.Based on summing up basic geology and ore geology of the orefieid,the polymetallic deposits in the orefield have been divided into seven major substyles according to their occurring positions and control factors.The ore-forming fluid inclusion styles in the orefield include those of two-phase fluid,liquid CO2-bearing three-phase and daughter mineral-bearing multi-phase.The homogenization temperatures range from 382° to 122℃,falling into five clusters of 370° to 390°,300° to 360°,230° to 300°,210° to 290° and 120° to 200°,and the clusters of 300° to 360°,230° to 300° and 120° to 200° are three major mineralization stages,with fluid salinity peaks from 4.14% to 7.31%,2.07% to 7.31% and 0.53% to 3.90%,respectively.The ore-forming fluids are mainly type of NaCl-H2O with medium to high density （0.74-1.02 g/cm3）,or CO2-bearing NaCl-H2O with medium to low density （0.18-0.79 g/cm3）.The fluid salinity and density both show a decline tendency with decreasing temperature.According to the measurement and calculation of Hand O-isotopic compositions in the quartz of the quartz-sulfide veins,δDV-SMOW of the ore-forming fluid is from-84‰ to-54‰,and δ18OV-SMOW of that is from 6.75‰ to 9.21‰,indicating a magmatic fluid.The δ34SV-CDT of sulfides in the ores fall into two groups,one is from-4.4‰ to 2.2‰ with average of-1.42‰,and the other from 18.8‰ to 21.6‰ with average of 19.8‰.The S-isotopic data shows one peak at-4.4‰ to 2.2‰ （meaning-1.42‰） suggesting a simple magmatic sulfur source.The ore Pbisotopic ratios are 206pb/204pb from 17.817 to 17.983,207pb/204pb from 15.470 to 15.620 and 208pb/204pb from 38.072 to 38.481,indicating characteristics of mantle-derived lead.The data show that the major ore deposits in the orefield have a magmatic-hydrothermal genesis and that the SHRIMP zircon age of the granodiorite porphyry,closely related to the mineralization,is 151.2±4.2 Ma （MSWD =1.3）,which can represent the formation ages of the ores and intrusion rocks.The study aids understanding of the ore-forming processes of the major metallic ore deposits in the orefield.

Genesis of the Zhaokalong Fe-Cu Polymetallic Deposit at Yushu, China: Evidence from Ore Geochemistry and Fluid Inclusions

The ore types of the Zhaokalong Fe-Cu deposit are divided into two categories： sulfide-type and oxide-type. The sulfide-type ore include siderite ore, galena-sphalerite ore and chalcopyrite ore, whereas the oxide-type ore include magnetite ore and hematite ore. The ore textures and structures indicate that the Zhaokalong deposit is of the sedimentary-exhalative mineralization type. Geochemical analyses show that the two ore types have a high As, Sb, Mn, Co and Ni content. The REE patterns reveal an enrichment of the LREE compared to the HREE. Isotopic analysis of siderite ore reveal that the j13CpDB ranges from -2.01 to 3.34 （%0） whereas the JISOsMow ranges from 6.96 to 18.95 （%0）. The fluid inclusion microthermometry results indicate that homogenization temperatures of fluid inclusions in quartz range from 131 to 181~C, with salinity values of 1.06 to 8.04 wt% NaCI eq. The mineralizing fluid therefore belongs to the low temperature - low salinity system, with a mineralizing solution of a CO2-Ca2＋（Na＋, K＋）-SO42- （F-, CI--H20 system. The geochemical results and fluid inclusion data provide additional evidence that the Zhaokalong deposit is a sedex-type deposit that experienced two stages of mineralization. The sulfide mineralization probably occurred first, during the sedimentary exhalative process, as exhibited by the abundance of marine materials associated with the sulfide ores, indicating a higher temperature and relatively deoxidized oceanic depositional environment. After the main exhalative stage, hydrothermal activity was superimposed to the sulfide mineralization. The later stage oxide mineralization occurred in a low temperature and relatively oxidized environment, in which magmatic fluid circulation was dominant.

Fluid Inclusions and Metallization of the Kendekeke Polymetallic Deposit in Qinghai Province, China

The Kendekeke polymetallic deposit,located in the middle part of the magmatic arc belt of Qimantag on the southwestern margin of the Qaidam Basin,is a polygenetic compound deposit in the Qimantag metallogenic belt of Qinghai Province.Multi-periodic ore-forming processes occurred in this deposit,including early-stage iron mineralization and lead-zinc-gold-polymetallic mineralization which was controlled by later hydrothermal process.The characteristics of the ore-forming fluids and mineralization were discussed by using the fluid inclusion petrography,Laser Raman Spectrum and micro-thermometry methods.Three stages,namely,S1-stage （copper-iron-sulfide stage）,S2-stage （lead-zinc-sulfide stage） and C-stage （carbonate stage） were included in the hydrothermal process as indicated by the results of this study.The fluid inclusions are in three types：aqueous inclusion （type I）,CO2-aqueous inclusion （type Ⅱ） and pure CO2 inclusion （type Ⅲ）.Type Ⅰ inclusions were observed in the S1-stage,having homogenization temperature at 240-320℃,and salinities ranging from 19.8％ to 25.0％ （wt％ NaCl equiv.）.All three types of inclusions,existing as immiscible inclusion assemblages,were presented in the S2-stage,with the lowest homogenization temperature ranging from 175 ℃ to 295℃,which represents the metallogenic temperature of the S2-stage.The salinities of these inclusions are in the range of 1.5％ to 16％.The fluid inclusions in the C-stage belong to types Ⅰ,Ⅱ and Ⅲ,having homogenization temperatures at 120-210℃,and salinities ranging from 0.9％ to 14.5％.These observations indicate that the ore-forming fluids evolved from high-temperature to low-temperature,from high-salinity to low-salinity,from homogenization to immiscible separation.Results of Laser Raman Spectroscopy show that high density of CO2 and CH4 were found as gas compositions in the inclusions.CO2,worked as the pH buffer of ore-forming fluids,together with reduction of organic gases （i.e.CH4,etc）,affected the transport and sediment of the minerals.The fluid system alternated between open and close systems,namely,between lithostatic pressure and hydrostatic pressure systems.The calculated metallogenic pressures are in the range of 30 to 87 Mpa corresponding to 3 km mineralization depth.Under the influence of tectonic movements,immiscible separation occurred in the original ore-forming fluids,which were derived from the previous high-salinity,high-temperature magmatic fluids.The separation of CO2 changed the physicochemical properties and composition of the original fluids,and then diluted by mixing with extraneous fluids such as meteoric water and groundwater,and metallogenic materials in the fluids such as lead,zinc and gold were precipitated.

Degree of Brine Evaporation and Origin of the Mengyejing Potash Deposit：Evidence from Fluid Inclusions in Halite

The Mengyejing potash deposit is located in the southern port of the Simao Basin, Yunnan Province, and is hosted in mid-Cretaceous strata. The chemical compositions of fluid inclusions in halite crystals, collected from the level-610 adit in the deposit, were analysed by laser ablation inductively coupled plasma mass spectrometry（LA-ICP-MS）. The results show that the brine is of the Na-K-Mg-Ca-Cl type and has K concentrations that are distinctly higher than those of Mg and Ca, unlike normal brines associated with Cretaceous halite. The high K concentrations indicate that the degree of evaporation of the ancient Mengyejing saline lake was very high, reaching the sylvite deposition stage but rarely reaching the carnallite deposition stage. The trajectory of the H and O isotopic compositions of the brines in the halite-hosted fluid inclusions corresponds to intense evaporation, indicating that the net evaporation exceeded the net inflow of brines. These brine compositions in halite-hosted fluid inclusions were likely formed by the dissolution of previously deposited K-bearing minerals by fresh continental and/or seawater, forming a type of modified seawater, with deep hydrothermal fluids potentially supplying additional potassium. The basin likely experienced multiple seawater incursion, dissolution and redeposition events in a high-temperature environment with high evaporation rates.

Discovery and Significance of High CH_4 Primary Fluid Inclusions in Reservoir Volcanic Rocks of the Songliao Basin,NE China

Comparing compositions of the fluid inclusions in volcanic rocks to the contents and isotopes of the gases in corresponding volcanic reservoirs using microthermometry, Raman microspectroscopy and mass spectrum analysis, we found that： （1） up to 82 mole% methane exists in the primary inclusions hosted in the reservoir volcanic rocks; （2） high CH4 inclusions recognized in the volcanic rocks correspond to CH4-bcaring CO2 reservoirs that are rich in helium and with a high ^3He/^4He ratio and which show reversed order of 813C in alkane; （3） in gas reservoirs of such abiotic methane （〉80%） and a mix of CH4 and CO2, the enclosed content of CH4 in the volcanic inclusions is usually below 42 mole%, and the reversed order of δ^13C in alkane is sometimes irregular in the corresponding gas pools; （4） a glassy inclusion with a homogeneous temperature over 900℃ also contains a small portion of CH4 although predominantly CO2. This affinity between gas pool and content of inclusion in the same volcanic reservoirs demonstrates that magma-originated gases, both CH4 and CO2, have contributed significantly to the corresponding gas pools and that the assumed hydrocarbon budget of the bulk earth might be much larger than conventionally supposed.