Palaeotemperatures and Diagenetic Phases of the Upper Triassic Oil-bearing Sandstones in the Eastern Part of the Ordos Basin

The maximum palaeotemperature of oil-bearing sandstones in the UpperTriassic in the eastern Ordos basin has been determined by using many methods including thevitrinite reflectance, fluid inclusion, apatite fission track, illite crystallinity, chlorite polytypeand diagenetic change of authigenic minerals. The thermal gradient in the Late Mesozoic wasabout 2.9-3.0℃/100m. The Upper Triassic was in a mature stage of organic matter andhydrocarbon began to be generated and migrated during this period. The palaeotemperatures ofoil-bearing sandstones were in the range of 88-110℃; those for the generation and migrationof oil ranged from 112 to 122℃. The thickness of the denuded strata overlying the UpperTriassic was 2465-2750m. The present burial depth of oil-bearing sandstones is generally from400 to 1200m. At a depth of ca. 1900m, the temperature may reach 140℃. Below this depth,organic matter was supermature and mainly generated gas.

Statistical analysis of physico-mechanical parameters of sandstones occurring in orogenic settings

In northeastern Sicily(Italy),sandstone rock masses widely crop out as cover deposits over crystalline terrains belonging to the orogenic belt.Despite being part of the same geological formation,these sandstones are characterized by highly different features in terms of texture and physico-mechanical properties.This poses a scientific question on the possibility of tracing these rocks to a single statistical model,which could be representative of their main engineering geological properties.Therefore,it is worth investigating on the possible reasons of such differences,that should be searched either in the current geographical sandstone distribution or in the rock texture.For this study,sandstone samples were collected from different sites and were analyzed at both the hand and thin section scales.Three sandstone types were recognized,characterized by a different texture.Then,the laboratory characterization allowed estimating their main physico-mechanical and ultrasonic properties,such as porosity,density,mechanical strength,deformability,and ultrasonic velocities.The rock mechanical strength proved linked to the rock compactness and to the presence of lithic fragments,while pores and a pseudo-matrix between grains represent weakening features.Rock data were also statistically analyzed by grouping the specimens according to a geographical criterion,with respect to their sampling area,but no link was found between location and rock properties.Finally,with the aim of achieving mathematical laws that could be used to predict some rock properties from others,useful for practical purposes when dealing with such a high property variability,single and multiple regression analyses were carried out.Results show that the Uniaxial Compressive Strength,porosity,and P-wave velocity are the best predictors for a quick,indirect estimation of the main physico-mechanical parameters.The methodological approach developed for this research can be taken as reference to study other worldwide cases,involving rocks characterized by a wide range of physico-mechanical properties and covering large regional territories.

Exoscopy of Detrital Zircons from Niamey Neoproterozoic Sandstones (Eastern Edge of the West African Craton, Southwestern Niger): Interpretation of Detrital Sediments Provenance

This study focuses on exoscopic analyses of detrital zircon grains of Archean and Paleoproterozoic age, contained in the sediments from the Niamey Neoproterozoic sandstones (Niamey region), with a view to confirming the sediments sources already proposed (Kénéma-Man domain for Archean-age zircons and Baoulé Mossi domain for Paleoproterozoic-age zircons). Exoscopic analysis reveals that Archean zircon grains are more corroded, with rounded to sub-rounded shapes, while Paleoproterozoic zircon grains are less corroded and mostly angular in shape. The strong corrosion of Archean zircon grains, implying long-distance transport, is consistent with the remoteness of the Kenema-Man domain which are the source these sediments. The fact that the Paleoproterozoic zircon grains show little or no wear implies a proximal source of sediments, corresponding to the Baoulé Mossi domain.

“Green Bank”Atop SandStones

The Pisha sandstone region in Jungar Banner once suffered the most severe water loss and soil erosion in the world.In just a couple of decades,the apple industry has become a major business for the local economy.

Study of Oil-Bearing Drill Cuttings Cleaning and De-Oiling Treatment Method for Shale Gas Reservoirs

Due to its extensive use in shale gas exploration and development,oil-based drilling fluids generate large amounts of oil-bearing drill cuttings during the drilling process.The large amount of oil-bearing drill cuttings generated during the drilling process can lead to serious secondary contamination.In this study,a wetting agent FSC-6 with good hydrophobic and oleophobic properties was synthesized to construct an efficient oil removal system.For the first time,the mechanism of this system was analyzed by using the theory of adhesion function,interfacial tension and wettability.At the same time,a combined acoustic-chemical treatment process was applied to the wastewater and slag generated after the cleaning of the oil-bearing drill cuttings.The experimental results show that the application of this pollution-free technology can effectively solve the environmental pollution and resource recovery problems of oil-bearing drill cuttings.It meets the standard of drilling chips with oil content less than 2%in SY/T7422-2018“Oil-based drilling fluid drilling chips treatment system for oil and gas drilling equipment”.

Mechanical behaviours of bedded sandstone under hydromechanical coupling

The combination of the dipping effect and hydromechanical(H-M)coupling effect can easily lead to water inrush disasters in water-rich roadways with different dip angles in coal mines.Therefore,H-M coupling tests of bedded sandstones under identical osmotic pressure and various confining pressures were conducted.Then,the evolution curves of stress-strain,permeability and damage,macro-and mesoscopic failure characteristics were obtained.Subsequently,the mechanical behaviour was characterized,and finally the failure mechanism was revealed.The results showed that:(1)The failure of the sandstone with the bedding angle of 45°or 60°was the structure-dominant type,while that with the bedding angle of 0°,30°or 90°was the force-dominant type.(2)When the bedding angle was in the range of(0°,30°)or(45°,90°),the confining pressure played a dominant role in influencing the peak strength.However,withinβ∈(30°,45°),the bedding effect played a dominant role in the peak strength.(3)With the increase in bedding angle,the cohesion increased first,then decreased and finally increased,while the internal friction angle was the opposite.(4)When the bedding angle was 0°or 30°,the“water wedging”effect and the“bedding buckling”effect would lead to the forking or converging shear failure.When the bedding angle was 45°or 60°,the sliding friction effect would lead to the shear slipping failure.When the bedding angle was 90°,the combination of the“bedding buckling”effect and shear effect would lead to the mixed tension-shear failure.The above conclusions obtained are helpful for the prevention of water inrush disasters in water-rich roadways with different dips in coal mines.

Dynamic impact properties of deep sandstone under thermal-hydraulicmechanical coupling loads

The deep rock mass within coal mines situated in a challenging environment are characterized by high ground stress,high geotemperature,high osmotic water pressure,and dynamic disturbances from mechanical excavation.To investigate the impact of this complex mechanical environment on the dynamic characteristics of roof sandstone in self-formed roadways without coal pillars,standard specimens of deep sandstone from the 2611 upper tunnel working face of the Yongmei Company within the Henan Coal Chemical Industry Group in Henan,China were prepared,and an orthogonal test was designed.Using a self-developed geotechnical dynamic impact mechanics test system,triaxial dynamic impact tests under thermal-hydraulicmechanical coupling conditions were conducted on deep sandstone.The results indicate that under high confining pressure,deep sandstone exhibits pronounced brittle failure at low temperatures,with peak strength gradually decreasing as temperature and osmotic water pressure increase.Conversely,under low confining pressure and low temperature,the brittleness of deep sandstone weakens gradually,while ductility increases.Moreover,sandstone demonstrates higher peak strength at low temperatures under high axial pressure conditions,lower peak strength at high temperatures,and greater strain under low axial pressure and high osmotic water pressure.Increases in impact air pressure and osmotic water pressure have proportionally greater effects on peak stress and peak strain.Approximately 50%of the input strain energy is utilized as effective energy driving the sandstone fracture process.Polar analysis identifies the optimal combination of factors affecting the peak stress and peak strain of sandstone.Under the coupling effect,intergranular and transgranular fractures occur within the sandstone.SEM images illustrate that the damage forms range from minor damage with multiple fissures to extensive fractures and severe fragmentation.This study elucidates the varied dynamic impact mechanical properties of deep sandstones under thermal-hydraulic-mechanical coupling,along with multifactor analysis methods and their optimal factor combinations.

A Data-Oriented Method to Optimize Hydraulic Fracturing Parameters of Tight Sandstone Reservoirs

Based on the actual data collected from the tight sandstone development zone, correlation analysis using theSpearman method was conducted to determine the main factors influencing the gas production rate of tightsandstone fracturing. An integrated model combining geological engineering and numerical simulation of fracturepropagation and production was completed. Based on data analysis, the hydraulic fracture parameters wereoptimized to develop a differentiated fracturing treatment adjustment plan. The results indicate that the influenceof geological and engineering factors in the X1 and X2 development zones in the study area differs significantly.Therefore, it is challenging to adopt a uniform development strategy to achieve rapid production increase. Thedata analysis reveals that the variation in gas production rate is primarily affected by the reservoir thickness andpermeability parameters as geological factors. On the other hand, the amount of treatment fluid and proppantaddition significantly impact the gas production rate as engineering factors. Among these factors, the influence ofgeological factors is more pronounced in block X1. Therefore, the main focus should be on further optimizing thefracturing interval and adjusting the geological development well location. Given the existing well location, thereis limited potential for further optimizing fracture parameters to increase production. For block X2, the fracturingparameters should be optimized. Data screening was conducted to identify outliers in the entire dataset, and adata-driven fracturing parameter optimization method was employed to determine the basic adjustment directionfor reservoir stimulation in the target block. This approach provides insights into the influence of geological,stimulation, and completion parameters on gas production rate. Consequently, the subsequent fracturing parameteroptimization design can significantly reduce the modeling and simulation workload and guide field operations toimprove and optimize hydraulic fracturing efficiency.

Performances of fissured red sandstone after thermal treatment with constant-amplitude and low-cycle impacts

In the engineering practices,it is increasingly common to encounter fractured rocks perturbed by temperatures and frequent dynamic loads.In this paper,the dynamic behaviors and fracture characteristics of red sandstone considering temperatures(25℃,200℃,400℃,600℃,and 800℃)and fissure angles(0°,30°,60°,and 90°)were evaluated under constant-amplitude and low-cycle(CALC)impacts actuated by a modified split Hopkinson pressure bar(SHPB)system.Subsequently,fracture morphology and second-order statistics within the grey-level co-occurrence matrix(GLCM)were examined using scanning electron microscopy(SEM).Meanwhile,the deep analysis and discussion of the mechanical response were conducted through the synchronous thermal analyzer(STA)test,numerical simulations,one-dimensional stress wave theory,and material structure.The multiple regression models between response variables and interactive effects of independent variables were established using the response surface method(RSM).The results demonstrate the fatigue strength and life diminish as temperatures rise and increase with increasing fissure angles,while the strain rate exhibits an inverse behavior.Furthermore,the peak stress intensification and strain rate softening observed during CALC impact exhibit greater prominence at increased fissure angles.The failure is dominated by tensile damage with concise evolution paths and intergranular cracks as well as the compressor-crushed zone which may affect the failure mode after 400℃.The second-order statistics of GLCM in SEM images exhibit a considerable dependence on the temperatures.Also,thermal damage dominated by thermal properties controls the material structure and wave impedance and eventually affects the incident wave intensity.The tensile wave reflected from the fissure surface is the inherent mechanism responsible for the angle effect exhibited by the fatigue strength and life.Ultimately,the peak stress intensification and strain rate softening during impact are determined by both the material structure and compaction governed by thermal damage and tensile wave.

Parameter calibration of the tensile-shear interactive damage constitutive model for sandstone failure

The tensile-shear interactive damage(TSID)model is a novel and powerful constitutive model for rock-like materials.This study proposes a methodology to calibrate the TSID model parameters to simulate sandstone.The basic parameters of sandstone are determined through a series of static and dynamic tests,including uniaxial compression,Brazilian disc,triaxial compression under varying confining pressures,hydrostatic compression,and dynamic compression and tensile tests with a split Hopkinson pressure bar.Based on the sandstone test results from this study and previous research,a step-by-step procedure for parameter calibration is outlined,which accounts for the categories of the strength surface,equation of state(EOS),strain rate effect,and damage.The calibrated parameters are verified through numerical tests that correspond to the experimental loading conditions.Consistency between numerical results and experimental data indicates the precision and reliability of the calibrated parameters.The methodology presented in this study is scientifically sound,straightforward,and essential for improving the TSID model.Furthermore,it has the potential to contribute to other rock constitutive models,particularly new user-defined models.

Characteristics and control factors of feldspar dissolution in gravity flow sandstone of Chang 7 Member,Triassic Yanchang Formation,Ordos Basin,NW China

To clarify the formation and distribution of feldspar dissolution pores and predict the distribution of high-quality reservoir in gravity flow sandstone of the 7^(th) member of Triassic Yanchang Formation(Chang 7 Member)in the Ordos Basin,thin sections,scanning electron microscopy,energy spectrum analysis,X-ray diffraction whole rock analysis,and dissolution experiments are employed in this study to investigate the characteristics and control factors of feldspar dissolution pores.The results show that:(1)Three types of diagenetic processes are observed in the feldspar of Chang 7 sandstone in the study area:secondary overgrowth of feldspar,replacement by clay and calcite,and dissolution of detrital feldspar.(2)The feldspar dissolution of Chang 7 tight sandstone is caused by organic acid,and is further affected by the type of feldspar,the degree of early feldspar alteration,and the buffering effect of mica debris on organic acid.(3)Feldspars have varying degrees of dissolution.Potassium feldspar is more susceptible to dissolution than plagioclase.Among potassium feldspar,orthoclase is more soluble than microcline,and unaltered feldspar is more soluble than early kaolinized or sericitized feldspar.(4)The dissolution experiment demonstrated that the presence of mica can hinder the dissolution of feldspar.Mica of the same mass has a significantly stronger capacity to consume organic acids than feldspar.(5)Dissolution pores in feldspar of Chang 7 Member are more abundant in areas with low mica content,and they improve the reservoir physical properties,while in areas with high mica content,the number of feldspar dissolution pores decreases significantly.

Origin of Tafoni in the Late Cretaceous Aeolian Sandstones,Danxiashan UNESCO Global Geopark,South China

Tafoni occur generally in granular rocks around the world, but their origin remains controversial. In this study,the roles of lithology, micro–climate, and organism in tafoni development are investigated in the Danxiashan UNESCO Global Geopark of South China. The Jinshiyan Temple and Luyitang sites along the Jinjiang River are chosen to conduct tafoni morphometry, bedrock petrography, and micro–climate analyses. The research methods used in this study include field observations and measurements, Voronoi diagrams, polarizing microscopic and scanning electron microscopic(SEM)image analysis, and meteorological detection. The tafoni are mostly 2–10 cm in length and elliptical in shape. The Late Cretaceous Jinshiyan sandstones are characterized by a grain–to–grain contact fabric and moderate sorting with a high proportion of soluble grains and cements. The Voronoi diagrams developed through the Arc GIS software are largely consistent with the tafoni openings. Moreover, owing to exposure to solar insolation, the external temperature values are higher than the internal ones, while the external relative humidity values are lower than the internal ones. Therefore, the permeable Jinshiyan sandstones are fundamental for tafoni development, while the abundant moisture from the Jinjiang River and frequent rains is favorable for salt weathering in tandem with biological activities. At last, a five–stage development model is proposed for the tafoni progression in the study area.

The effective pressure law for permeability of clay-rich sandstones

To study the relative sensitivity of permeability to pore pressure Pp and confining pressure Pc for clay-rich rocks, permeability measurements were performed on samples of four clay-rich sandstones. A new method （hereafter denoted the ＂slide method＂） was developed and used for analyzing the permeability data obtained. The effective pressure coefficients for permeability nk were calculated. The values of nk were found to be greater than 1.0 and insensitive to changes in pressure. These results confirmed observations previously made on clay-rich rocks. Also, the coefficients nk obtained had different characteristics for different samples because of differences in the types of clay they contained. The effective pressure law （σeff=Pc-nkPp） determined using the slide method gave better results about k（oefr） than classic Terzaghi＇s law （σeff=Pc-nkPp）.

Non-Darcy flow in oil accumulation (oil displacing water) and relative permeability and oil saturation characteristics of low-permeability sandstones

Hydrocarbon resources in low-permeability sandstones are very abundant and are extensively distributed. Low-permeability reservoirs show several unique characteristics, including lack of a definite trap boundary or caprock, limited buoyancy effect, complex oil-gas-water distribution, without obvious oil-gas-water interfaces, and relatively low oil （gas） saturation. Based on the simulation experiments of oil accumulation in low-permeability sandstone （oil displacing water）, we study the migration and accumulation characteristics of non-Darcy oil flow, and discuss the values and influencing factors of relative permeability which is a key parameter characterizing oil migration and accumulation in low-permeability sandstone. The results indicate that： 1） Oil migration （oil displacing water） in low- permeability sandstone shows non-Darcy percolation characteristics, and there is a threshold pressure gradient during oil migration and accumulation, which has a good negative correlation with permeability and apparent fluidity; 2） With decrease of permeability and apparent fluidity and increase of fluid viscosity, the percolation curve is closer to the pressure gradient axis and the threshold pressure gradient increases. When the apparent fluidity is more than 1.0, the percolation curve shows modified Darcy flow characteristics, while when the apparent fluidity up＂ non-Darcy percolation curve; 3） Oil-water is less than 1.0, the percolation curve is a ＂concave- two-phase relative permeability is affected by core permeability, fluid viscosity, apparent fluidity, and injection drive force; 4） The oil saturation of low- permeability sandstone reservoirs is mostly within 35%-60%, and the oil saturation also has a good positive correlation with the permeability and apparent fluidity.

Tectonic Setting and Nature of the Provenance of Sedimentary Rocks in Lanping Mesozoic-Cenozoic Basin: Evidence from Geochemistry of Sandstones

The geochemical composition of sandstones in the sedimentary basin is controlled mainly by the tectonic setting of the provenance, and it is therefore possible to reveal the tectonic setting of the provenance and the nature of source rocks in terms of the geochemical composition of sandstones. The major elements, rare\|earth elements and trace elements of the Mesozoic\|Cenozoic sandstones in the Lanping Basin are studied in this paper, revealing that the tectonic settings of the provenance for Mesozoic\|Cenozoic sedimentary rocks in the Lanping Basin belong to a passive continental margin and a continental island arc. Combined with the data on sedimentary facies and palaeogeography, it is referred that the eastern part of the basin is located mainly at the tectonic setting of the passive continental margin before Mesozoic, whereas the western part may be represented by a continental island arc. This is compatible with the regional geology data. The protoliths of sedimentary rocks should be derived from the upper continental crust, and are composed mainly of felsic rocks, mixed with some andesitic rocks and old sediment components. Therefore, the Lanping Mesozoic\|Cenozoic Basin is a typical continental\|type basin. This provides strong geochemical evidence for the evolution of the paleo\|Tethys and the basin\|range transition.

Architectural Units and Groundwater Resource Quantity Evaluation of Cretaceous Sandstones in the Ordos Basin,China

Sandstone is a common lithology in a number of groundwater reservoirs. Studying the skeleton sandstone architectural units, therefore, lays the basis for characterizing aquifer systems, groundwater quality, and resource evaluation. This comprehensive analysis of Cretaceous aquiferous sandstones in the Ordos basin, China, shows that there exists a basin-scale skeleton sandstone in the Luohe Formation which contains 11 isolated barrier beds, 12 small skeleton sandstone bodies in Huanhe Formation, and 3 in the Luohandong Formation. The spatial structure and superimposed relationship as well as the medium properties of these skeleton sandstones and isolated barrier beds can be shown by 3D visualization models. Simultaneously, resource quantity can be evaluated with the 3D inquiry functions. The comparison between property models and structural models indicates that the salinity of groundwater of the Luohe Formation has a close connection with the locations of isolated barrier beds that contain abundant gypsum. Through quantitative calculation, groundwater resource of the Cretaceous Luohe and Luohandong formations is estimated to be 1.6×10-（12） m-3, and the total groundwater resource of the Cretaceous system in the Ordos basin is more than 2×10-（12） m-3.

Hydrocarbon accumulation characteristics of beachbar sandstones in the southern slope of the Dongying Sag, Jiyang Depression, Bohai Bay Basin, China

A number of beach-bar sandstone reservoir beds are developed in the upper fourth member of the Eocene Shahejie Formation （Es4s） on the southern slope of the Dongying Sag.Based on the analysis of seismic and logging data,with characterization and petrographic studies of core and cutting samples,this paper analyzes the hydrocarbon accumulation characteristics in two typical blocks of the Boxing and Wangjiagang oilfields,especially reservoir bed heterogeneity and migration conditions that influence oil and gas distribution,calculates the index of reservoir bed quality （IRQ） with a mathematical method,and discusses the relationship between driving force and resistance of hydrocarbon accumulation.Taking into account the characteristics of thin interbeds in beach-bar sandstones,an experimental model simulated the characteristics of hydrocarbon migration and accumulation in thin interbedded sandstones with reservoir bed heterogeneity.The results showed that hydrocarbon distribution and properties were extremely non-uniform.Reservoir bed and migration conditions controlled hydrocarbon accumulation in beach-bar sandstones.IRQ is above 0.4 in the main hydrocarbon region.Sand body distribution,structural configuration and fault systems controlled the direction of regional migration and location of hydrocarbon accumulation.Simulation experiments indicated that the change of driving force for hydrocarbon migration affected selective accumulation mechanisms.Hydrocarbon moved vertically along fault zones to the reservoir and resulted in the distribution of hydrocarbon in the reservoir.Two kinds of hydrocarbon accumulation models exist in the study area.One is a hydrocarbon accumulation model controlled by reservoir bed heterogeneity and the second is a hydrocarbon accumulation model controlled by a complex migration system with faults connecting sandbodies.Finally,different exploration strategies should be adopted for the detailed exploration for beach-bar sandstone reservoirs according to different geological backgrounds.

Fracture prediction approach for oil-bearing reservoirs based on AVAZ attributes in an orthorhombic medium

Fracture systems in nature are complicated. Normally vertical fractures develop in an isotropic background. However, the presence of horizontal fine layering or horizontal fractures in reservoirs makes the vertical fractures develop in a VTI（a transversely isotropic media with a vertical symmetry axis） background. In this case, reservoirs can be described better by using an orthorhombic medium instead of a traditional HTI（a transversely isotropic media with a horizontal symmetry axis） medium. In this paper, we focus on the fracture prediction study within an orthorhombic medium for oil-bearing reservoirs. Firstly, we simplify the reflection coefficient approximation in an orthorhombic medium. Secondly, the impact of horizontal fracturing on the reflection coefficient approximation is analyzed theoretically. Then based on that approximation, we compare and analyze the relative impact of vertical fracturing, horizontal fracturing and fluid indicative factor on traditional ellipse fitting results and the scaled B attributes. We find that scaled B attributes are more sensitive to vertical fractures, so scaled B attributes are proposed to predict vertical fractures. Finally, a test is developed to predict the fracture development intensity of an oil-bearing reservoir. The fracture development observed in cores is used to validate the study method. The findings of both theoretical analyses and practical application reveal that compared with traditional methods, this new approach has improved the prediction of fracture development intensity in oil-bearing reservoirs.

Detrital K-feldspar^(40)Ar/^(39)Ar Ages:Source Constraints of the Lower Miocene Sandstones in the Pearl River Mouth Basin,South China Sea

The South China Sea began to outspread in the Oligocene. A great quantity of terraneous detritus was deposited in the northern continental shelf of the sea, mostly in Pearl River Mouth Basin, which constituted the main paleo-Pearl River Delta. The delta developed for a long geological time and formed a superimposed area. Almost all the oil and gas fields of detrital rock reservoir distribute in this delta. Thirty-three oil sandstone core samples in the Zhujiang Formation, lower Miocene （23-16 Ma）, were collected from nine wells. The illite samples with detrital K feldspar （Kfs） separated from these sandstone cores in four sub-structural belts were analysed by the high-precision 40Ar/39Ar laser stepwise heating technique. All 33 illite 40Ar/39Ar data consistently yielded gradually rising age spectra at the low-temperature steps until reaching age plateaus at mid-high temperature steps. The youngest ages corresponding to the beginning steps were interpreted as the hydrocarbon accumulation ages and the plateau ages in mid-high temperature steps as the contributions of the detrital feldspar representing the ages of the granitic parent rocks in the provenances. The ages of the detrital feldspar from the Zhujiang Formation in the four sub-structural belts were different： （1） the late Cretaceous ages in the Lufeng 13 fault structural belt; （2） the late Cretaceous and early Cretaceous-Jurassic ages in the Huizhou 21 buried hill-fault belt; （3） the Jurassic and Triassic ages in the Xijiang 24 buried hill-fault belt; and （4） the early Cretaceous - late Jurassic ages in the Panyu 4 oil area. These detrital feldspar 4~Ar/39Ar ages become younger and younger from west to east, corresponding to the age distribution of the granites in the adjacent Guangdong Province, Southern China.

Origin and Distribution of Hydrogen Sulfide in Oil-Bearing Basins,China

The concentration of hydrogen sulfide gas （H2S） varies greatly in the oil-bearing basins of China, from zero to 90%. At present, oil and gas reservoirs with high H2S concentration have been discovered in three basins, viz. the Bohai Bay Basin, Sichuan Basin and the Tarim Basin, whereas natural gas with low H2S concentration has been found in the Ordos Basin, the Songliao Basin and the Junggar Basin. Studies suggest that in China H2S origin types are very complex. In the carbonate reservoir of the Sichuan Basin, the Ordos Basin and the Tarim Basin, as well as the carbonatedominated reservoir in the Luojia area of the Jiyang depression in the Bohai Bay Basin, Wumaying areas of the Huanghua depression, and Zhaolanzhuang areas of the Jizhong depression, the H2S is of Thermochemical Sulfate Reduction （TSR） origin. The H2S is of Bacterial Sulphate Reduction （BSR） origin deduced from the waterflooding operation in the Changheng Oilfield （placanticline oil fields） in the Songliao Basin. H2S originates from thermal decomposition of sulfur-bearing crude oil in the heavy oil area in the Junggar Basin and in the Liaohe heavy oil steam pilot area in the western depression of the Bohai Bay Basin. The origin types are most complex, including TSR and thermal decomposition of sulfcompounds among other combinations of causes. Various methods have been tried to identify the origin mechanism and to predict the distribution of H2S. The origin identification methods for H2S mainly comprise sulfur and carbon isotopes, reservoir petrology, particular biomarkers, and petroleum geology integrated technologies; using a combination of these applications can allow the accurate identification of the origins of H2S. The prediction technologies for primary and secondary origin of H2S have been set up separately.