Characterization of Flame Retardancy and Oil-Water Separation Capacity of Superhydrophobic Silylated Melamine Sponges

A silylated melamine sponge(SMS)was prepared by two simple steps,namely,immersion and dehydration of a melamine sponge coated with methyltrichlorosilane.The silylated structure of SMS was characterized by FT-IR(Fourier-transform infrared)spectroscopy,SEM(Scanning electron microscopy)and in terms of water contact angles.Its oil-water absorption and separation capacities were measured by FT-IR and UV-visible spectrophoto-metry.The experimental results have shown that oligomeric silanol covalently bonds by Si-N onto the surface of melamine sponge skeletons.SMS has shown superhydrophobicity with a water contact angle exceeding 150°±1°,a better separation efficiency with regard to diesel oil(by 99.31%(wt/wt%)in oil-water mixture and even up to 99.99%(wt/wt%)for diesel oil in its saturated aqueous solution.Moreover,SMS inherited the intrinsicflame retardancy of the melamine sponge.In general,SMS has shown superhydrophobicity,high porosity,excellent selectivity,remarkable recyclability,and better absorption capacity for various oils and organic solvents,and a high separation efficiency for oil in saturated aqueous solutions.

Preparation of Silica Nanosphere with Vertical Pore and Its Application in Oil-water Separation

Uniform monodispersed mesoporous silica nanospheres with vertical pores were successfully synthesized using chiral amphiphilic small molecule L-16Ala5PyClO4and solvents as dual templates via solgel transcription.The morphologies and pore sizes of silicas are adjustable by changing the type and amount of solvents in the reaction systems.With the increase of the organic solvent content,the morphologies of the obtained silica changed from nanospheres with vertical pore structures to nanosheets structures.When 1 mL of benzene,cyclohexane or toluene were used as solvents,only silica nanospheres were obtained,the BET surface areas of silica nanospheres reached 600.7,669.5,and 560.8 m^(2)/g,respectively.The pore sizes were 3.51,3.54,and 3.46 nm,respectively.Significantly,these ordered silica nanospheres/poly(vinyl alcohol-co-ethylene)(PVAco-PE)nanofiber membranes have high separation efficiencies(>99%)for n-hexane/water mixtures.

Wax deposition modeling in oil-water stratified pipe flow

Wax deposition in oil-water stratified flow is commonly encountered onshore and offshore oil production pipe systems,and typically reduces transportation capacity of oil.The accurate predicted model of wax deposition has becomes an indispensable approach to design effective remediation strategies.However,a reliable mechanistic model for wax deposition prediction in oil-water two-phase stratified pipe flow is lacking to validate the deposition process.In this work,a three-dimensional(axial,radial,and angular)robust wax deposit model for oil-water stratified circular pipe flow was developed.The model of formation of a gel deposit based on the first principles of rheology was developed,associated with the results obtained from hydrodynamics and heat/mass transfer simulations.The predictions for wax deposition are found to compare satisfactorily with experimental data with two different oils for single phase and four different water cuts for oil-water stratified pipe flow.It can be seen from the wax gelation mechanism that an increase in water cut can help to reduce the wall/oil-deposit interface shear stress,thereby leading to an increase in the degree of gelation as well as the deposit rate.Furthermore,a local deposit analysis in the circumferential direction was conducted,for water cut 75%and total flow rate 5 m3/h,which provided insights to understand that the thickness on pipe wall was roughly uniformly distributed locates near the top of the pipe and the nearer the position gets close to two points,where the oil-water interface contacts the inner wall,the deposition thickness quickly dropped to 0.It was attributed to the fact that a roughly uniformly thickness far away from the oil-water interface contact the inner wall resulted in the slowly changes temperature along the circumferential pipe wall wetted by oil.

An Unambiguity and Anti-Range Eclipse Method for PD Radar Using Biphase Coded Signals

Target detection is an important research content in the radar field.At present,efforts are being made to optimize the precision of detection information.In this paper,we use the high pulse repetition frequency(HPRF)transmission method and orthogonal biphase coded signals in each pulse to avoid velocity ambiguity and range ambiguity of radar detection.In addition,We also apply Walsh matrix and genetic algorithm(GA)to generate satisfying orthogonal biphase coded signals with low auto-correlation sidelobe peak and cross-correlation peak,which make the results more accurate.In a radar receiver,data rearrangement of echo signals is performed,and then pulse compression and moving target detection(MTD)are utilized to get the final velocity and range information of a target without velocity ambiguity and range ambiguity.Besides,a small transmitting pulse time width is adopted to reduce the working blind area,and two different high pulse repetition frequencies(HPRFs)are adopted to solve the problem of range eclipse.Simulation results finally prove the effectiveness and feasibility of the proposed method.

Preparation of Hydrophobic Fly Ash by Surface Modification and Oil-water Separation Devices

A simple and effective superhydrophobic mesh was designed and made to separate oil-water mixture. Alkali-activated fly ash reacted with 1-bromooctadecane to prepare superhydrophobic modified fly ash (MFA) with low surface energy through Williamson ether synthesis. The MFA powder was then coated uniformly on a stainless steel mesh (SSM) along with the epoxy resin E44 and curing agent T31 to give the superhydrophobic MFA-modified stainless steel mesh (MFA-SSM). The MFA-SSM has a high static water contact angle (CA) of 150.1°and can separate various oil or organic solvent from water with>95%separation efficiency. The oil-water separation efficiency remained high after 30 runs of petroleum ether/water separation.The developed superhydrophobic stainless steel mesh is expected to have wider use in oil-water separation.

Influences of water treatment agents on oil-water interfacial properties of oilfield produced water

The emulsion stability of oilfield produced water is related to the oil-water interfacial film strength and the zeta potential of the oil droplets. We investigated the effects of water treatment agents （corrosion inhibitor SL-2, scale inhibitor HEDP, germicide 1227, and flocculant polyaluminium chloride PAC） on the stability of oilfield produced water. The influence of these treatment agents on oil-water interfacial properties and the mechanism of these agents acting on the oilfield produced water were studied by measuring the interfacial shear viscosity, interfacial tension and zeta electric potential. The results indicated that the scale inhibitor HEDP could increase the oil-water interfacial film strength, and it could also increase the absolute value of the zeta potential of oil droplets. HEDP played an important role in the stability of the emulsion. Polyaluminum chloride （PAC） reduced the stability of the emulsion by considerably decreasing the absolute value of the zeta potential of oil droplets. Corrosion inhibitor SL-2 and germicide 1227 could decrease the oil-water interfacial tension, whereas they had little influence on oil-water interfacial shear viscosity and oil-water interfacial electricity properties.

Non-Linear Numerical Simulation of Coal and Gas Outburst as a Coupling Instability Problem of Solid-Fluid Biphase Media

Based on the theory of continuum mechanics of multi-pbase media, a mathematical model and non-linear FEM equation of the coupling instability problem of solid-fluid biphase media for coal-methane outburst under finite deformation are established. The critical conditions of the surface instability are presented as the singularity of the total stiffness matrices of the coal body for coal-methaue outburst. That means the deformtion or the coal body emerges bifurcatiou phenomena. The numerical simulation of a typical outburst is made.

A novel phosphate ligand used for the Rh-catalyzed hydroformylation of cyclohexene in a thermoregulated PEG biphase system

A novel phosphate ligand, tri-（methoxyl polyethylene glycol）-phosphate （TMPGPA）, has been synthesized and used in the Rhcatalyzed hydroformylation of cyclohexene in a thermoregulated PEG biphase system. Under the optimized conditions, pressure = 5 MPa （H2：CO = 1：1）, P/Rh = 10 （molar ratio）, reaction time = 4 h and temperature = 120 ℃, the conversion of cyclohexene and the yield of aldehyde are 99%. The catalyst retained in PEG phase can be easily separated from the organic phase containing product by simple phase separation and reused ten times without obvious loss in activity.

Fabrication of magnetically responsive anti-fouling and easy-cleaning nanofiber membrane and its application for efficient oil-water emulsion separation

The magnetically responsive anti-fouling nanofiber membrane(MRANM)was fabricated for efficient oilwater emulsion separation,which could be cleaned using oscillating magnetic field.MRANM was prepared by grafting superparamagnetic Fe_(3)O_(4) nanoparticles onto the surface of electrospun polyacrylonitrile nanofiber membrane(PANM).Compared with PANM,the water contact angle of MRANM decreased from 104°to 0°,indicating that the hydrophilicity of the membrane was significantly improved.For the emulsions of hexadecane,octane and rapeseed oil,the separation efficiency was 98.04%,96.59%and 92.67%,respectively.After the treatments in oscillating magnetic field,the separation efficiency kept above 95%after 8 times recycling,which indicated that the MRANM had good regenerability and reusability.The as-fabricated membrane with magnetic responsiveness facilitated an effective method for solving the membrane fouling problem during practical applications of separation high viscosity oil-water emulsion.

Robust,fluorine-free and superhydrophobic composite melamine sponge modified with dual silanized SiO_(2) microspheres for oil-water separation

Massive oily wastewater discharged from industrial production and human daily life have been an urgent environmental and ecological challenge.Superhydrophobic materials have attracted tremendous attention due to their unique properties and potential applications in the treatment of wastewater.In this study,a novel superhydrophobic/superoleophilic composite melamine sponge modified with dual silanized SiO_(2) microspheres was fabricated simply by a two-step sol-gel method using vinyltriethoxysilane and hexadecyltrimethoxysilane as functional agent,which exhibited a water contact angle of 153.2°and a water sliding contact angle of 4.8°.Furthermore,the composite sponge showed the excellent oil adsorption performance and the compressive elasticity reaching up to 130 g·g^(-1) of dichloromethane and 33.1 kPa of compressive stress.It was worth noting that the composite sponge presented the excellent separation efficiency(up to 99.5%)in the processes of continuous oil/water separation.The robust superhydrophobic composite melamine sponge provided the possibility with the practical application for oil-water separation.

A Review of Formation Mechanism Study on Reservoirs with Tilted Oil-water Contacts

The distribution characteristics of the oil-water contact are the basis for the reservoir exploration and development and reserves evaluation. The reservoir with a tilted oil-water contact has a unique formation mechanism, and the understanding of its distribution and formation mechanism will directly affect the evaluations for the reservoir type, well deployment, selection of well pattern and type, determination of test section, and reserves evaluation. Based on the analysis of reservoir characteristics, petrophysical properties and geological structure in 40 reservoirs worldwide with tilted oil-water contacts, the progress of the research on the formation mechanisms of titled oil-water contacts is summarized in terms of the hydrodynamic conditions, reservoir heterogeneity, neotectonic movement and oil-gas exploitation. According to the formation mechanism of tilted oil-water contacts and the needs of exploration research, different aspects of research methods are summarized and classified, such as the calculation of equipotential surfaces for oil and water in the formation, analysis of formation pressure and analysis of reservoir physical properties and so on. Based upon statistical analysis, it is suggested that the degree of the inclination of the oil-water contact be divided based on the dip of oil-water contact（DipTOWC）. The tilted oil-water contact is divided into three categories： large dip（DipTOWC≥55 m/km）, medium dip（4 m/km≤DipTOWC55 m/km）, and small dip（DipTOWC4 m/km）. The classification and evaluation method can be combined with structure amplitude and reservoir property. The formation mechanism of domestic and international reservoirs with tilted oil-water contacts are summarized in this paper, which have important significance in guiding the exploration and development of the oilfield with tilted oil-water contacts, reserves evaluation, and well deployment.

Simultaneously spray-assisted assembling reversible superwetting coatings for oil-water separation

Here,superhydrophobic cuprous oxide(Cu2O)with hierarchical micro/nanosized structures was synthesized via sprayassisted layer by layer assembling.The asprepared superhydrophobic meshes with high contact angle(159.6°)and low sliding angle(1°)are covered with Cu_(2)O "coral reef"like micro/nanosized structures.Interestingly,the superhydrophobic mesh surfaces became superhydrophilic again due to the oxidization of Cu_(2)O to CuO by annealing at a higher temperature(300℃).And the superhydrophobic properties would be recovered by heating at 120℃.Furthermore,the superwetting meshes were applied to design a miniature device to separate light or heavy oil from the wateroil mixtures with excellent separation efficiency.These superwetting surfaces by simultaneously sprayassisted layer by layer assembling technique show the potential application in universal oilwater separation.

Formation of Uniform Oil-Soluble Fe_3O_4 Nanoparticles via Oil-Water Interface System

Nowadays,the novel oil water interface method has attracted a considerable attention owing to the advantages of mild reaction conditions,simple operation,low cost,and high efficiency.In this paper,uniform oil-soluble Fe_3O_4 nanoparticles(NPs) were synthesized by oil-water interface method from mixing iron tristearate of 0.067mol/L in cyclohexane with ferrous sulfate in water.The as-prepared products were characterized by X-ray diffraction(XRD),transmission electron microscopy(TEM),vibrating sample magnetometer(VSM),Fourier transform infrared spectroscopy(FT-IR) and thermogravimetric analyzer(TGA).TEM images and XRD profiles showed that the size of the oil-soluble products ranged in 1.7-6.9 nm.VSM indicated that the Fe_3O_4 NPs were superparamagetic.FT-IR and TGA proved that oleic acid was combined to the surface of Fe_3O_4 NPs closely.TEM images and XRD profiles revealed that the most suitable reaction concentration of NH_3·H_2O,oleic acid/water in volume,reaction temperature and reaction time were 4.5 mol/L,50:1 000,80℃ and 6 h,respectively.The formation mechanism of the nearly monodispersed Fe_3O_4 NPs was that the preformed Fe_3O_4 nuclei were capped by oleic acid as early as the nucleation occurred in oil-water interface and subsequently entered into oil phase to stop growing.

Magnetic Wood-based Superhydrophobic Aerogel for Efficient Oil-Water Separation

The fabrication of directionally driven oil-water separation materials has great significance for the removal of oil spills and organic pollutants.In this study,an oil-water separation aerogel capable of directionally adsorbing oil was designed using an anisotropic wood aerogel with a layered structure and a top-down fabrication strategy.Specifically,a magnetic wood-based superhydrophobic aerogel(methyltrimethoxysilane(MTMS)/Fe_(3)O_(4) wood aerogel)was developed through the in situ coprecipitation of Fe_(3)O_(4) nanoparticles and chemical vapor deposition.Owing to its highly porous structure,lipophilicity,hydrophobicity(water contact angle of 160°),and high compressibility,the MTMS/Fe_(3)O_(4) wood aerogel exhibits excellent oil-water separation performance and compression cycle stability.Additionally,the Fe_(3)O_(4) endows the material with excellent magnetic and photothermal conversion capabilities.These excellent properties make MTMS/Fe_(3)O_(4) wood aerogel a promising recyclable and sustainable oil-water separation material.

Enzymatic synthesis, antioxidant ability and oil-water distribution coefficient of troxerutin fatty acid esters

Troxerutin fatty acid esters were prepared using troxerutin and fatty acid vinyl esters as substrates in pyridine through enzymatic route. The structures of as-prepared compounds were identified by FT-TR, NMR, and ESI-HRMS. Using alkaline protease(≥30 mg/mL) as enzyme, maximum yields reached 58% at 3:1(vinyl hexanoate to troxerutin) in pyridine(water content ≤1%). The yields gradually declined as chain length of acyl donors rose. The antioxidation abilities of the as-obtained compounds were confirmed by both DPPH free radical scavenging and potassium ferricyanide reduction methods. The antioxidation ability of troxerutin fatty acid esters was found lower than that of troxerutin. However, the logP values of troxerutin fatty acid esters varied from 0.15 to 1.94, suggesting that troxerutin fatty acid esters had better lipophilicity than troxerutin(logP =-2.12) when compared to their oil-water distribution coefficients. Overall, these findings look promising as reference for further development of future troxerutin.

Tribological Behaviour of GCr15 Steel to Si_3N_4 Ceramic Lubricated by Biphase Liguid Lubricants

ＴｒｉｂｏｌｏｇｉｃａｌＢｅｈａｖｉｏｕｒｏｆＧＣｒ１５ＳｔｅｅｌｔｏＳｉ_３Ｎ_４ＣｅｒａｍｉｃＬｕｂｒｉｃａｔｅｄｂｙＢｉｐｈａｓｅＬｉｇｕｉｄＬｕｂｒｉｃａｎｔｓＳＯＮＧＢａｏｙｕ；ＷＡＮＧＬｉｑｉｎ；ＱＩＹｕｌｉｎ（宋宝玉），（王黎钦），（齐毓...

Electrospinning Nanofiber Membrane Reinforced PVA Composite Hydrogel with Preferable Mechanical Performance for Oil-Water Separation

Nowadays hydrogels have been attracting the massive interest in oil-water separation due to their robust hydrophilicity and fantastic underwater oiliness features.However,the weak toughness and tensile strength shortcomings of hydrogels have thus inhibited their actual applicability.For this reason,we successfully fabricated the electrospun nanofiber membrane-reinforced PVA composite hydrogels.The PVA-PAN composite hydrogel has exhibited the excellent tensile strength and friction performance,separately enhancing 174.2%of the tensile strength,and reducing 20.7%of the friction coefficient and 58.7%of wear volume relative to the neat PVA hydrogel.Furthermore,the pull-out experiments indicated that the PAN nanofiber membrane exerted a stronger interface bonding effect with PVA hydrogel.The oil-water separation evaluation test showed that the separation efficiency reached up to 97.6%for treating the SA-100 lubricating oil/water system.

Simulation of Oil-Water Flow in Shale Oil Reservoirs Based on Smooth Particle Hydrodynamics

A Smooth Particle Hydrodynamics(SPH)method is employed to simulate the two-phase flow of oil and water in a reservoir.It is shown that,in comparison to the classical finite difference approach,this method is more stable and effective at capturing the complex evolution of this category of two-phase flows.The influence of several smooth functions is explored and it is concluded that the Gaussian function is the best one.After 200 days,the block water cutoff for the Gaussian function is 0.3,whereas the other functions have a block water cutoff of 0.8.The effect of various injection ratios on real reservoir production is explored.When 14 and 8 m^(3)/day is employed,the water breakthrough time is 130 and 170 days,respectively,and the block produces 9246 m^(3) and 6338 m^(3) of oil cumulatively over 400 days.

Multifractal analysis of inclined oil-water countercurrent flow

Characterizing countercurrent flow structures in an inclined oil-water two-phase flow from one-dimensional measurement is of great importance for model building and sensor design.Firstly,we conducted oil-water two-phase flow experiments in an inclined pipe to measure the conductance signals of three typical water-dominated oil-water flow patterns in inclined flow,i.e.,dispersion oil-in-water pseudo-slug flow （PS）,dispersion oil-in-water countercurrent flow （CT）,and transitional flow （TF）.In pseudo-slug flow,countercurrent flow and transitional flow,oil is completely dispersed in water.Then we used magnitude and sign decomposition analysis and multifractal analysis to reveal levels of complexity in different flow patterns.We found that the PS and CT flow patterns both exhibited high complexity and obvious multifractal dynamic behavior,but the magnitude scaling exponent and singularity of the CT flow pattern were less than those of the PS flow pattern; and the TF flow pattern exhibited low complexity and almost monofractal behavior,and its magnitude scaling was close to random behavior.Meanwhile,at short time scales,all sign series of two-phase flow patterns exhibited very similar strong positive correlation; at high time scales,the scaling analysis of sign series showed different anti-correlated behavior.Furthermore,with an increase in oil flow rate,the flow structure became regular,which could be reflected by the decrease in the width of spectrum and the difference in dimensions.The results suggested that different oil-water flow patterns exhibited different nonlinear features,and the varying levels of complexity could well characterize the fluid dynamics underlying different oil-water flow patterns.

Nano silica aerogel-induced formation of an organic/alloy biphasic interfacial layer enables construction of stable high-energy lithium metal batteries

Lithium metal batteries represent promising candidates for high-energy-density batteries, however, many challenges must still be overcome,e.g., interface instability and dendrite growth. In this work, nano silica aerogel was employed to generate a hybrid film with high lithium ion conductivity(0.6 mS cm^(-1)at room temperature) via an in situ crosslinking reaction. TOF-SIMS profile analysis has revealed conversion mechanism of hybrid film to Li–Si alloy/Li F biphasic interface layer, suggesting that the Li–Si alloy and Li F-rich interface layer promoted rapid Li+transport and shielded the Li anodes from corrosive reactions with electrolyte-derived products. When coupled with nickel-cobalt-manganese-based cathodes, the batteries achieve outstanding capacity retention over 1000 cycles at 1 C. Additionally the developed film coated on Li enabled high coulombic efficiency(99.5%) after long-term cycling when coupled with S cathodes. Overall, the results presented herein confirm an effective strategy for the development of high-energy batteries.