The exergy analysis and finite time thermodynamic methods had been employed to analyze the compound condensation process (CCP). It was based on the air-cooling heat pump unit. The cooling capacity of the chiller unit ...The exergy analysis and finite time thermodynamic methods had been employed to analyze the compound condensation process (CCP). It was based on the air-cooling heat pump unit. The cooling capacity of the chiller unit is about 1 kW, and the work refrigerant is R22/R407C/R410A/CO2. The MATLAB/SIMULINK software was employed to build the simulation model. The thermodynamic simulation model is significant for the optimization of parameters of the unit, such as condensation and evaporation temperature and mass flow of the sanitary hot water and size of hot water storage tank. The COP of the CCP of R410A system is about 3% - 5% higher than the CCP of the R22 system, while CCP of the R407C system is a little lower than the CCP of R22 system. And the CCP of CO2 trans-critical system has advantage in the hot supply mode. The simulation method provided a theoretical reference for developing the production of CCP with substitute refrigerant R407C/R410A/CO2.展开更多
Experiments were carried out to study the effects of compound angle,hole arrangement,and blowing ratio on the film cooling performance of multiple rows of holes on the suction surface of a turbine blade.The turbine ...Experiments were carried out to study the effects of compound angle,hole arrangement,and blowing ratio on the film cooling performance of multiple rows of holes on the suction surface of a turbine blade.The turbine worked at rotational speed of 600 rpm corresponding to the rotational Reynolds number of 5.36105.Three rows of cylindrical holes arranged in line or in stagger were drilled on the rotor blade suction surface at the streamwise location of 12.4%,17.8%,and 23.2%,respectively.Three compound angles,with the same streamwise angle of 45but different lateral deflection angles of 45,0,and45,were studied.The film cooling effectiveness was obtained using pressure sensitive paint(PSP)technique with average blowing ratios varied from 0.5 to 2.0.The results showed that the application of compound angle changes the jet direction in the near-hole region and makes the film spread laterally.Compared with the film cooling without compound angle,using positive and negative compound angle can improve overall average film cooling effectiveness by about 20%and 25%,respectively.The effects of the secondary flow also can be weakened.A stagger film trajectory arrangement can achieve more uniform film coverage with higher overall film cooling effectiveness.The film trajectory arrangement of a positive compound angle injection is determined by the combined effect of hole arrangement and blowing ratio.While,the film trajectory arrangement of a negative compound angle injection is almost the same as the hole arrangement and nearly does not change with the blowing ratio.展开更多
Effect of cooling rate on the 3 D morphology and the growth mechanism of the proeutectic Al3Ni intermetallic compound(IMC) that forms at the Al/Ni interface after solidification was investigated by synchrotron X-ray m...Effect of cooling rate on the 3 D morphology and the growth mechanism of the proeutectic Al3Ni intermetallic compound(IMC) that forms at the Al/Ni interface after solidification was investigated by synchrotron X-ray microtomography in combination with EBSD analysis. The proeutectic Al3Ni phase that forms under an average cooling rate of 0.1 Ks^(-1) shows a characteristic faceted growth behavior and presents a typical 3 D morphology as partially hollow quadrangular prisms. On the contrary, that forms under an average cooling rate of 10 Ks^(-1) shows complicated dendritic morphology with asymmetrically distributed arms and faceted V-shape groove at the distal end, indicating a gradual transition of the growth behavior from non-faceted to faceted during the solidification process. These results reveal that the morphology of the proeutectic Al3Ni is highly sensitive to the solidification condition so that fine control of the desired morphology may be achieved by carefully manipulating the cooling profile.展开更多
文摘The exergy analysis and finite time thermodynamic methods had been employed to analyze the compound condensation process (CCP). It was based on the air-cooling heat pump unit. The cooling capacity of the chiller unit is about 1 kW, and the work refrigerant is R22/R407C/R410A/CO2. The MATLAB/SIMULINK software was employed to build the simulation model. The thermodynamic simulation model is significant for the optimization of parameters of the unit, such as condensation and evaporation temperature and mass flow of the sanitary hot water and size of hot water storage tank. The COP of the CCP of R410A system is about 3% - 5% higher than the CCP of the R22 system, while CCP of the R407C system is a little lower than the CCP of R22 system. And the CCP of CO2 trans-critical system has advantage in the hot supply mode. The simulation method provided a theoretical reference for developing the production of CCP with substitute refrigerant R407C/R410A/CO2.
基金the National Natural Science Foundation of China(No.51906008,No.51822602)the Fundamental Research Funds for the Central Universities(No.YWF-19-BJ-J-293)National Science and Technology Major Project(2017-III-0003-0027).
文摘Experiments were carried out to study the effects of compound angle,hole arrangement,and blowing ratio on the film cooling performance of multiple rows of holes on the suction surface of a turbine blade.The turbine worked at rotational speed of 600 rpm corresponding to the rotational Reynolds number of 5.36105.Three rows of cylindrical holes arranged in line or in stagger were drilled on the rotor blade suction surface at the streamwise location of 12.4%,17.8%,and 23.2%,respectively.Three compound angles,with the same streamwise angle of 45but different lateral deflection angles of 45,0,and45,were studied.The film cooling effectiveness was obtained using pressure sensitive paint(PSP)technique with average blowing ratios varied from 0.5 to 2.0.The results showed that the application of compound angle changes the jet direction in the near-hole region and makes the film spread laterally.Compared with the film cooling without compound angle,using positive and negative compound angle can improve overall average film cooling effectiveness by about 20%and 25%,respectively.The effects of the secondary flow also can be weakened.A stagger film trajectory arrangement can achieve more uniform film coverage with higher overall film cooling effectiveness.The film trajectory arrangement of a positive compound angle injection is determined by the combined effect of hole arrangement and blowing ratio.While,the film trajectory arrangement of a negative compound angle injection is almost the same as the hole arrangement and nearly does not change with the blowing ratio.
基金the National Natural Science Foundation of China-Excellent Young Scholars(No.51922068)the National Natural Science Foundation of China(Nos.51727802,51821001 and 51904187)The support of synchrotron radiation phase-contrast imaging by the BL13W1 beam line of Shanghai Synchrotron Radiation Facility(SSRF),China,is gratefully acknowledged。
文摘Effect of cooling rate on the 3 D morphology and the growth mechanism of the proeutectic Al3Ni intermetallic compound(IMC) that forms at the Al/Ni interface after solidification was investigated by synchrotron X-ray microtomography in combination with EBSD analysis. The proeutectic Al3Ni phase that forms under an average cooling rate of 0.1 Ks^(-1) shows a characteristic faceted growth behavior and presents a typical 3 D morphology as partially hollow quadrangular prisms. On the contrary, that forms under an average cooling rate of 10 Ks^(-1) shows complicated dendritic morphology with asymmetrically distributed arms and faceted V-shape groove at the distal end, indicating a gradual transition of the growth behavior from non-faceted to faceted during the solidification process. These results reveal that the morphology of the proeutectic Al3Ni is highly sensitive to the solidification condition so that fine control of the desired morphology may be achieved by carefully manipulating the cooling profile.
