Backscattered electron images（BSE） obtained by scanning electron microscope was used to quantitatively characterize the microstructure of interfacial transition zone（ITZ） in concrete. Influences of aggregate size...Backscattered electron images（BSE） obtained by scanning electron microscope was used to quantitatively characterize the microstructure of interfacial transition zone（ITZ） in concrete. Influences of aggregate size（5, 10, 20, and 30 mm）, water to cement ratio（0.23, 0.35 and 0.53） and curing time（from 3d to 90d） on the microstructure of interfacial transition zone between coarse aggregate and bulk cement matrix were investigated. The volume percentage of detectable porosity and unhydrated cement in ITZ was quantitatively analyzed and compared with that in the matrix of various concretes. Nanoindentation technology was applied to obtain the elastic properties of ITZ and matrix, and the elastic modulus of concrete was then calculated based on the Lu ＆ Torquato model and self-consistence scheme by using the ITZ thickness and elastic modulus obtained from this investigation. The experimental results demonstrated that the microstructure and thickness of ITZ in concrete vary with a variety of factors, like aggregate size, water to cement ratio and curing time. The relative low elastic properties of ITZ should be paid attention to, especially for early age concrete.展开更多
The nanostructure of cementitious materials has important effects on concrete properties. The effects of rice husk ash（RHA） on cement hydration product phases and interfacial transition zone（ITZ） in mortar were in...The nanostructure of cementitious materials has important effects on concrete properties. The effects of rice husk ash（RHA） on cement hydration product phases and interfacial transition zone（ITZ） in mortar were investigated from the nano-scale structure perspective. The experimental results indicate that, with the increase of RHA dosages of samples, the volume fraction of high-density calcium-silicate-hydrate（HD C-S-H） in porosity and hydration product phases increases. The volume fractions of HD C-S-H in C-S-H of samples show an increasing trend with the increase of RHA dosages. RHA decreases the thickness of ITZ and increases the matrix elastic moduli of samples, however, the RHA dosoges hardly affect the thickness and elastic moduli.展开更多
Specially designed fibers are widely used in engineering practice because the specially-designed shape can help to improve the bonding strength of the fiber and the interface. Studied in this paper is the interfacial ...Specially designed fibers are widely used in engineering practice because the specially-designed shape can help to improve the bonding strength of the fiber and the interface. Studied in this paper is the interfacial shear stress transfer behavior on both sides of the specially designed fiber when it is being pulled out; in which automatic analysis of three-dimensional photoelasticity is employed and the finite element method is adopted. The results show that the stress transfer occurs mainly in the region near the fiber＇s embedded end where the stress reaches its critical point, leading to debonding of the interface. Before debonding, as the pullout loading increases, the peak value of shear stress transfers along the fiber from the embedded end to the interior of the matrix, and then stops at the hooked part of the fiber because of its impediment. When the interface begins to debond as the load increases, the shear stress can be transferred to the hooked part.展开更多
By means of an asymptotic expansion method of a regular series, an exact higher-order analysis has been carried out for the near-tip fields of an in- terfacial crack between two different elastic-plastic materials. Th...By means of an asymptotic expansion method of a regular series, an exact higher-order analysis has been carried out for the near-tip fields of an in- terfacial crack between two different elastic-plastic materials. The condition of plane strain is invoked. Two group of solutions have been obtained for the crack surface conditions: (1) traction free and (2) frictionless contact, respectively. It is found that along the interface ahead of crack tip the stress fields are co-order continuous while the displacement fields are cross-order continuous. The zone of dominance of the asymptotic solutions has been estimated.展开更多
Reflection and transmission of an incident plane wave at five types of possible interfaces between two dipolar gradient elastic solids are studied in this paper. First, the explicit expressions of monopolar tractions ...Reflection and transmission of an incident plane wave at five types of possible interfaces between two dipolar gradient elastic solids are studied in this paper. First, the explicit expressions of monopolar tractions and dipolar tractions are derived from the postulated function of strain energy density. Then, the displacements, the normal derivative of displacements, monopolar tractions, and dipolar tractions are used to create the nontraditional interface conditions. There are five types of possible interfaces based on all possible combinations of the displacements and the normal derivative of displacements. These interfacial conditions with consideration of microstructure effects are used to determine the amplitude ratio of the reflection and transmission waves with respect to the incident wave. Further, the energy ratios of the reflection and transmission waves with respect to the incident wave are calculated. Some numerical results of the reflection and transmission coefficients are given in terms of energy flux ratio for five types of possible interfaces. The influences of the five types of possible interfaces on the energy partition between the refection waves and the transmission waves are discussed, and the concept of double channels of energy transfer is first proposed to explain the different influences of five types of interfaces.展开更多
The stress and deformation fields near the tip of an anti-plane crack growing quasi-statically along an interface of elastic perfectly plastic materials are given in this paper. A family of solutions for the growing c...The stress and deformation fields near the tip of an anti-plane crack growing quasi-statically along an interface of elastic perfectly plastic materials are given in this paper. A family of solutions for the growing crack fields is found covering all admissible crack line shear stress ratios.展开更多
基金Funded by the National Natural Science Foundation of China(No.51178105)the Major State Basic Research Development Program of China(973 Program)(No.2015CB655104)the Collaborative Innovation Centre for Advanced Civil Engineering Materials
文摘Backscattered electron images（BSE） obtained by scanning electron microscope was used to quantitatively characterize the microstructure of interfacial transition zone（ITZ） in concrete. Influences of aggregate size（5, 10, 20, and 30 mm）, water to cement ratio（0.23, 0.35 and 0.53） and curing time（from 3d to 90d） on the microstructure of interfacial transition zone between coarse aggregate and bulk cement matrix were investigated. The volume percentage of detectable porosity and unhydrated cement in ITZ was quantitatively analyzed and compared with that in the matrix of various concretes. Nanoindentation technology was applied to obtain the elastic properties of ITZ and matrix, and the elastic modulus of concrete was then calculated based on the Lu ＆ Torquato model and self-consistence scheme by using the ITZ thickness and elastic modulus obtained from this investigation. The experimental results demonstrated that the microstructure and thickness of ITZ in concrete vary with a variety of factors, like aggregate size, water to cement ratio and curing time. The relative low elastic properties of ITZ should be paid attention to, especially for early age concrete.
基金Funded by the National Natural Science Foundation of China(Nos.51602198,41427802 and 41302257)the Zhejiang Provincial Natural Science Foundation of China(No.LQ13D020001)the Shaoxing University Scientific Research Project(No.20145030)
文摘The nanostructure of cementitious materials has important effects on concrete properties. The effects of rice husk ash（RHA） on cement hydration product phases and interfacial transition zone（ITZ） in mortar were investigated from the nano-scale structure perspective. The experimental results indicate that, with the increase of RHA dosages of samples, the volume fraction of high-density calcium-silicate-hydrate（HD C-S-H） in porosity and hydration product phases increases. The volume fractions of HD C-S-H in C-S-H of samples show an increasing trend with the increase of RHA dosages. RHA decreases the thickness of ITZ and increases the matrix elastic moduli of samples, however, the RHA dosoges hardly affect the thickness and elastic moduli.
基金supported by the National Natural Science Foundation of China(10662005)
文摘Specially designed fibers are widely used in engineering practice because the specially-designed shape can help to improve the bonding strength of the fiber and the interface. Studied in this paper is the interfacial shear stress transfer behavior on both sides of the specially designed fiber when it is being pulled out; in which automatic analysis of three-dimensional photoelasticity is employed and the finite element method is adopted. The results show that the stress transfer occurs mainly in the region near the fiber＇s embedded end where the stress reaches its critical point, leading to debonding of the interface. Before debonding, as the pullout loading increases, the peak value of shear stress transfers along the fiber from the embedded end to the interior of the matrix, and then stops at the hooked part of the fiber because of its impediment. When the interface begins to debond as the load increases, the shear stress can be transferred to the hooked part.
基金The project supported by the National Natural Science Foundation of China
文摘By means of an asymptotic expansion method of a regular series, an exact higher-order analysis has been carried out for the near-tip fields of an in- terfacial crack between two different elastic-plastic materials. The condition of plane strain is invoked. Two group of solutions have been obtained for the crack surface conditions: (1) traction free and (2) frictionless contact, respectively. It is found that along the interface ahead of crack tip the stress fields are co-order continuous while the displacement fields are cross-order continuous. The zone of dominance of the asymptotic solutions has been estimated.
基金supported by the Fundamental Research Funds for the Central Universities (Grant FRF-BR-15-026A)the State science and technology support program (Grant 2013BAK12B08)+1 种基金the Hei Long Jiang Natural Science Fund (Grant B2015019)the National Natural Science Foundation of China (Grant 10972029)
文摘Reflection and transmission of an incident plane wave at five types of possible interfaces between two dipolar gradient elastic solids are studied in this paper. First, the explicit expressions of monopolar tractions and dipolar tractions are derived from the postulated function of strain energy density. Then, the displacements, the normal derivative of displacements, monopolar tractions, and dipolar tractions are used to create the nontraditional interface conditions. There are five types of possible interfaces based on all possible combinations of the displacements and the normal derivative of displacements. These interfacial conditions with consideration of microstructure effects are used to determine the amplitude ratio of the reflection and transmission waves with respect to the incident wave. Further, the energy ratios of the reflection and transmission waves with respect to the incident wave are calculated. Some numerical results of the reflection and transmission coefficients are given in terms of energy flux ratio for five types of possible interfaces. The influences of the five types of possible interfaces on the energy partition between the refection waves and the transmission waves are discussed, and the concept of double channels of energy transfer is first proposed to explain the different influences of five types of interfaces.
基金The project supported by the National Natural Science Foundation of China
文摘The stress and deformation fields near the tip of an anti-plane crack growing quasi-statically along an interface of elastic perfectly plastic materials are given in this paper. A family of solutions for the growing crack fields is found covering all admissible crack line shear stress ratios.
