Due to its extensive use in shale gas exploration and development,oil-based drilling fluids generate large amounts of oil-bearing drill cuttings during the drilling process.The large amount of oil-bearing drill cuttin...Due to its extensive use in shale gas exploration and development,oil-based drilling fluids generate large amounts of oil-bearing drill cuttings during the drilling process.The large amount of oil-bearing drill cuttings generated during the drilling process can lead to serious secondary contamination.In this study,a wetting agent FSC-6 with good hydrophobic and oleophobic properties was synthesized to construct an efficient oil removal system.For the first time,the mechanism of this system was analyzed by using the theory of adhesion function,interfacial tension and wettability.At the same time,a combined acoustic-chemical treatment process was applied to the wastewater and slag generated after the cleaning of the oil-bearing drill cuttings.The experimental results show that the application of this pollution-free technology can effectively solve the environmental pollution and resource recovery problems of oil-bearing drill cuttings.It meets the standard of drilling chips with oil content less than 2%in SY/T7422-2018“Oil-based drilling fluid drilling chips treatment system for oil and gas drilling equipment”.展开更多
A set of techniques for well treatment aimed to enhance oil recovery are considered in the present study.These are based on the application of elastic waves of various types(dilation-wave,vibro-wave,or other acoustica...A set of techniques for well treatment aimed to enhance oil recovery are considered in the present study.These are based on the application of elastic waves of various types(dilation-wave,vibro-wave,or other acoustically induced effects).In such a context,a new technique is proposed to predict the effectiveness of the elastic-wave well treatment using the rank distribution according to Zipf’s law.It is revealed that,when the results of elastic wave well treatments are analyzed,groups of wells exploiting various geological deposits can differ in terms of their slope coefficients and free members.As the slope coefficient increases,the average increase in the well oil production rate(after the well treatment)becomes larger.An equation is obtained accordingly for estimating the slope coefficient in the Zipf’s equation from the frequency of the elastic wave.The obtained results demonstrate the applicability of the Zipf’s law in the analysis of the technological efficiency of elastic-wave well treatment methods.展开更多
Crude palm Oil (CPO) processing is very popular in African Countries. In Cameroon, various actors are involved ranging from agro-industrial complexes to traditional processing by smallholders who use very inefficient ...Crude palm Oil (CPO) processing is very popular in African Countries. In Cameroon, various actors are involved ranging from agro-industrial complexes to traditional processing by smallholders who use very inefficient equipment and thus have low oil extraction rates. Small-scale processing by smallholders dates back to the early 1980s and has witnessed a lot of changes as a result of new actors in the sector, changing technologies and to an extent, government policies. This paper attempts a review of the origins and evolution of small-scale palm oil processing using intermediate technology, highlighting its importance to both the farmer and the national economy. An attempt is made to look into the future of this activity, with proposals for its consolidation.展开更多
Although petroleum is an important source of energy and an economic driver of growth,it is also a major soil pollutant that has destroyed large swathes of vegetation and forest cover.Therefore,it is vital to develop a...Although petroleum is an important source of energy and an economic driver of growth,it is also a major soil pollutant that has destroyed large swathes of vegetation and forest cover.Therefore,it is vital to develop affordable and efficient methods for the bioremediation of petroleum-contaminated forest soils to restore vegetation and improve tree survival rates.In this study,bioremediation experiments were performed in an electrically heated thermostatic reactor to test the effects of organic matter additives,surfactants,and oxygen providers of nine hydrocarbon-degrading fungal strains on crude oil removal rates.In the three soil temperatures tested(20℃,25℃,and 30℃),the highest average crude oil removal rate was at 25℃(74.8%)and the lowest at 30℃(49.4%).At each temperature,variations in the addition of organic matter and oxygen providers had significant effects on crude oil removal rate.Variations in surfactant addition was significant at 20℃ and 25℃ but insignificant at 30℃.Given the same surfactant treatment,variations in temperature,organic additives,and oxygen providers was significant for crude oil removal rate.Treatments without surfactants and treatments with Tween80 exhibited their highest crude oil removal rates at 25℃.However,treatments that included the SDS surfactant exhibited their highest crude oil removal rates at 30℃.Amongst the treatments without surfactants,treatments with corn cob addition had the highest crude oil removal rates,and with surfactants,treatments that included the organic fertilizer exhibited the highest crude oil removal rates.Given the same organic fertilizer treatment,the highest crude oil removal rate was at 25℃.At each level of oxygen availability,the maximum crude oil removal rate always occurred at 25℃,and the treatments that included organic fertilizer exhibited the highest crude oil removal rates.Amongst the treatments without oxygen providers,treatments without surfactants had the highest crude oil removal rates,and with an oxygen provider,treatments with SDS addition exhibited the highest crude oil removal rates.Based on the crude oil removal rates of the treatments,we determined that S_(1)W_(1)O_(1)(addition of Tween80,organic fertilizers,and H_(2)O_(2))was optimum for remediating petroleum-contaminated forest soils in cold,high-altitude regions.This study is helpful to vegetation restoration and reforestation on petroleum contaminated forestlands.展开更多
Based on the analysis of the production composition of reservoirs developed by the second&tertiary recovery combination(STRC),the relationship between the overall output of the STRC project and the production leve...Based on the analysis of the production composition of reservoirs developed by the second&tertiary recovery combination(STRC),the relationship between the overall output of the STRC project and the production level during the blank water flooding stage is proposed.According to the basic principle of reservoir engineering that the“recovery factor is equal to sweeping coefficient multiplied by oil displacement efficiency”,the formula for calculating the ultimate oil recovery factor of chemical combination flooding reservoir was established.By dividing the reservoir into a series of grids according to differen-tial calculus thinking,the relationship between the ultimate recovery factor of a certain number of grids and the recovery de-gree of the reservoir was established,and then the variation law of oil production rate of the STRC reservoir was obtained.The concept of“oil rate enlargement factor of chemical combination flooding”was defined,and a production calculation method of reservoir developed by STRC was put forward based on practical oilfield development experience.The study shows that the oil production enhancing effect of STRC increases evenly with the in crease of the ratio of STRC displacement efficiency to water displacement efficiency,and increases rapidly with the increase of the ratio of recovery degree at flooding mode conversion to the water displacement efficiency.STRC is more effective in increasing oil production of reservoir with high recovery degree.Through practical tests of the alkali free binary flooding(polymer/surfactant)projects,the relative error of the oil production calculation method of STRC reservoir is about±10%,which meets the requirements of reservoir engineering.展开更多
Developed products according to the formation process and inducement of blackheads,and verified the efficacy of products.The results showed that:after using the product for 15 minutes,the blackhead decrease rate is 13...Developed products according to the formation process and inducement of blackheads,and verified the efficacy of products.The results showed that:after using the product for 15 minutes,the blackhead decrease rate is 13.94%compare with the base value;after using the product for 7 days,the blackhead decrease rate is 25.43%compare with the base value;after using the product for 28 days,the blackhead decrease rate is 66.09%compare with the base value;after using the product for 15 minutes,the pores increase significantly compare with the control area;after 7 days of product use,there is no significant change in pore size compare with the base value;after 28 days of product use,there is no significant change in pore size compare with the base value;after 7 days of use,the oil decrease rate is 22.33%compare with the base value;after 28 days of use,the oil decrease rate is 29.05%compare with the base value;after 15 minutes of single use,93.94%of subjects are satisfy with blackhead removal;after continuous use of the test product for 28 days,96.67%of subjects are satisfy with blackhead removal,100%with oil control,and 96.67%with overall satisfaction of the product.展开更多
To reduce oil consumption during firing-up and partial-load operation, a tiny-oil ignition burner has been recommended. Through reacting-flow experiments performed on a full-scale experimental setup, the influence of ...To reduce oil consumption during firing-up and partial-load operation, a tiny-oil ignition burner has been recommended. Through reacting-flow experiments performed on a full-scale experimental setup, the influence of different oil flow rates on bituminous coal combustion as well as flow rates without coal feed was analyzed. The ignition burner is identical to that normally used in an 800 MWe utility boiler. Under operating conditions with flow rates of 50, 100, and 150kg/h, gas temperature distribu- tions were measured in the burner. At the equivalent measuring points at the exits of the first and second combustion chambers, these distributions remained almost unchanged under a constant coal feed rate of 4t/h. However on the burner centerline, distributions increased slightly with increasing flow rate. Different gas concentrations were measured at the center of the burner exit. For instance, the 02 concentration at the burner exit varied from 0.01% to 0.31% whereas CO concentrations were more than 10000 ppm. At the same coal feed rate of 4 t/h, burner resistances are 480, 600, and 740 Pa for oil flow rates of 50, 100, and 150 kg/h, respectively.展开更多
At first glance, the official figures of China's oil consumption in 2005 seem a bit confusing. With a robust economic growth and rising annual oil imports, China made the surprise announcement that its oil consump...At first glance, the official figures of China's oil consumption in 2005 seem a bit confusing. With a robust economic growth and rising annual oil imports, China made the surprise announcement that its oil consumption growth rate was dropping sharply, from 15.3 percent in 2004 to 2.1 percent in 2005. Earlier, China's Ministry展开更多
Offshore drilling and production operations can result in spills or leaks of hydrocarbons into seabed sediments, which can potentially contaminate these sediments with oil. If this oil later mi- grates to the water su...Offshore drilling and production operations can result in spills or leaks of hydrocarbons into seabed sediments, which can potentially contaminate these sediments with oil. If this oil later mi- grates to the water surface it has the potential for negative environmental impacts. For proper contin- gency planning and to avoid larger consequences in the environment, it is essential to understand me- chanisms and rates for hydrocarbon migration from oil containing sediments to the water surface as well as how much will remain trapped in the sediments. It is believed that the amount of oil transported out of the sediment can be affected by tidal pumping, a common form of subterranean groundwater dis- charge (SGD). However, we could find no study experimentally investigating the phenomenon of fluid flow in subsea sediments containing oil and the effects of tidal pumping. This study presents an experi- mental investigation of tidal pumping to determine if it is a possible mechanism that may contribute to the appearance of an oil sheen on the ocean surface above a sediment bed containing oil. An experimen- tal apparatus was constructed of clear PVC pipe allowing for oil migration to be monitored as it flowed out of a sand pack containing oil, while tidal pressure oscillations were applied in three different man- ners. The effect of tidal pumping was simulated via compression of air above the water (which simulated the increasing static head from tidal exchange). Experimental results show that sustained oil release oc- curred from all tests, and tests with oscillating pressure produced for longer periods of time. Further- more, the experimental results showed that the oil migration rate was affected by grain size, oil satura- tion, and oscillation wave type. In all oscillating experiments the rate and ultimate recovery was less than the comparable static experiments. For the conditions studied, the experimental results indicate that with an oscillating pressure on top of a sand pack, movement of a non-replenishing source of oil is sup- pressed by pressure oscillation.展开更多
文摘Due to its extensive use in shale gas exploration and development,oil-based drilling fluids generate large amounts of oil-bearing drill cuttings during the drilling process.The large amount of oil-bearing drill cuttings generated during the drilling process can lead to serious secondary contamination.In this study,a wetting agent FSC-6 with good hydrophobic and oleophobic properties was synthesized to construct an efficient oil removal system.For the first time,the mechanism of this system was analyzed by using the theory of adhesion function,interfacial tension and wettability.At the same time,a combined acoustic-chemical treatment process was applied to the wastewater and slag generated after the cleaning of the oil-bearing drill cuttings.The experimental results show that the application of this pollution-free technology can effectively solve the environmental pollution and resource recovery problems of oil-bearing drill cuttings.It meets the standard of drilling chips with oil content less than 2%in SY/T7422-2018“Oil-based drilling fluid drilling chips treatment system for oil and gas drilling equipment”.
基金supported by the Government of Perm Krai,Research Project No.C-26/628 dated 05/04/2021.
文摘A set of techniques for well treatment aimed to enhance oil recovery are considered in the present study.These are based on the application of elastic waves of various types(dilation-wave,vibro-wave,or other acoustically induced effects).In such a context,a new technique is proposed to predict the effectiveness of the elastic-wave well treatment using the rank distribution according to Zipf’s law.It is revealed that,when the results of elastic wave well treatments are analyzed,groups of wells exploiting various geological deposits can differ in terms of their slope coefficients and free members.As the slope coefficient increases,the average increase in the well oil production rate(after the well treatment)becomes larger.An equation is obtained accordingly for estimating the slope coefficient in the Zipf’s equation from the frequency of the elastic wave.The obtained results demonstrate the applicability of the Zipf’s law in the analysis of the technological efficiency of elastic-wave well treatment methods.
文摘Crude palm Oil (CPO) processing is very popular in African Countries. In Cameroon, various actors are involved ranging from agro-industrial complexes to traditional processing by smallholders who use very inefficient equipment and thus have low oil extraction rates. Small-scale processing by smallholders dates back to the early 1980s and has witnessed a lot of changes as a result of new actors in the sector, changing technologies and to an extent, government policies. This paper attempts a review of the origins and evolution of small-scale palm oil processing using intermediate technology, highlighting its importance to both the farmer and the national economy. An attempt is made to look into the future of this activity, with proposals for its consolidation.
基金This study was funded by the“948”project of The State Forestry Administration,“Microbial remediation of oil-polluted soil in Daqing Area”(2008-4-34)Special Fund project of basic Scientifi c Research operating Fee of Central Universities(2572014BA16).
文摘Although petroleum is an important source of energy and an economic driver of growth,it is also a major soil pollutant that has destroyed large swathes of vegetation and forest cover.Therefore,it is vital to develop affordable and efficient methods for the bioremediation of petroleum-contaminated forest soils to restore vegetation and improve tree survival rates.In this study,bioremediation experiments were performed in an electrically heated thermostatic reactor to test the effects of organic matter additives,surfactants,and oxygen providers of nine hydrocarbon-degrading fungal strains on crude oil removal rates.In the three soil temperatures tested(20℃,25℃,and 30℃),the highest average crude oil removal rate was at 25℃(74.8%)and the lowest at 30℃(49.4%).At each temperature,variations in the addition of organic matter and oxygen providers had significant effects on crude oil removal rate.Variations in surfactant addition was significant at 20℃ and 25℃ but insignificant at 30℃.Given the same surfactant treatment,variations in temperature,organic additives,and oxygen providers was significant for crude oil removal rate.Treatments without surfactants and treatments with Tween80 exhibited their highest crude oil removal rates at 25℃.However,treatments that included the SDS surfactant exhibited their highest crude oil removal rates at 30℃.Amongst the treatments without surfactants,treatments with corn cob addition had the highest crude oil removal rates,and with surfactants,treatments that included the organic fertilizer exhibited the highest crude oil removal rates.Given the same organic fertilizer treatment,the highest crude oil removal rate was at 25℃.At each level of oxygen availability,the maximum crude oil removal rate always occurred at 25℃,and the treatments that included organic fertilizer exhibited the highest crude oil removal rates.Amongst the treatments without oxygen providers,treatments without surfactants had the highest crude oil removal rates,and with an oxygen provider,treatments with SDS addition exhibited the highest crude oil removal rates.Based on the crude oil removal rates of the treatments,we determined that S_(1)W_(1)O_(1)(addition of Tween80,organic fertilizers,and H_(2)O_(2))was optimum for remediating petroleum-contaminated forest soils in cold,high-altitude regions.This study is helpful to vegetation restoration and reforestation on petroleum contaminated forestlands.
基金Supported by the National Science and Technology Major Project of China (2016ZX05010).
文摘Based on the analysis of the production composition of reservoirs developed by the second&tertiary recovery combination(STRC),the relationship between the overall output of the STRC project and the production level during the blank water flooding stage is proposed.According to the basic principle of reservoir engineering that the“recovery factor is equal to sweeping coefficient multiplied by oil displacement efficiency”,the formula for calculating the ultimate oil recovery factor of chemical combination flooding reservoir was established.By dividing the reservoir into a series of grids according to differen-tial calculus thinking,the relationship between the ultimate recovery factor of a certain number of grids and the recovery de-gree of the reservoir was established,and then the variation law of oil production rate of the STRC reservoir was obtained.The concept of“oil rate enlargement factor of chemical combination flooding”was defined,and a production calculation method of reservoir developed by STRC was put forward based on practical oilfield development experience.The study shows that the oil production enhancing effect of STRC increases evenly with the in crease of the ratio of STRC displacement efficiency to water displacement efficiency,and increases rapidly with the increase of the ratio of recovery degree at flooding mode conversion to the water displacement efficiency.STRC is more effective in increasing oil production of reservoir with high recovery degree.Through practical tests of the alkali free binary flooding(polymer/surfactant)projects,the relative error of the oil production calculation method of STRC reservoir is about±10%,which meets the requirements of reservoir engineering.
文摘Developed products according to the formation process and inducement of blackheads,and verified the efficacy of products.The results showed that:after using the product for 15 minutes,the blackhead decrease rate is 13.94%compare with the base value;after using the product for 7 days,the blackhead decrease rate is 25.43%compare with the base value;after using the product for 28 days,the blackhead decrease rate is 66.09%compare with the base value;after using the product for 15 minutes,the pores increase significantly compare with the control area;after 7 days of product use,there is no significant change in pore size compare with the base value;after 28 days of product use,there is no significant change in pore size compare with the base value;after 7 days of use,the oil decrease rate is 22.33%compare with the base value;after 28 days of use,the oil decrease rate is 29.05%compare with the base value;after 15 minutes of single use,93.94%of subjects are satisfy with blackhead removal;after continuous use of the test product for 28 days,96.67%of subjects are satisfy with blackhead removal,100%with oil control,and 96.67%with overall satisfaction of the product.
基金This work was supported by Foundation for Innovative Research Groups of the National Natural Science Foundation of China (Grant No. 51121004).
文摘To reduce oil consumption during firing-up and partial-load operation, a tiny-oil ignition burner has been recommended. Through reacting-flow experiments performed on a full-scale experimental setup, the influence of different oil flow rates on bituminous coal combustion as well as flow rates without coal feed was analyzed. The ignition burner is identical to that normally used in an 800 MWe utility boiler. Under operating conditions with flow rates of 50, 100, and 150kg/h, gas temperature distribu- tions were measured in the burner. At the equivalent measuring points at the exits of the first and second combustion chambers, these distributions remained almost unchanged under a constant coal feed rate of 4t/h. However on the burner centerline, distributions increased slightly with increasing flow rate. Different gas concentrations were measured at the center of the burner exit. For instance, the 02 concentration at the burner exit varied from 0.01% to 0.31% whereas CO concentrations were more than 10000 ppm. At the same coal feed rate of 4 t/h, burner resistances are 480, 600, and 740 Pa for oil flow rates of 50, 100, and 150 kg/h, respectively.
文摘At first glance, the official figures of China's oil consumption in 2005 seem a bit confusing. With a robust economic growth and rising annual oil imports, China made the surprise announcement that its oil consumption growth rate was dropping sharply, from 15.3 percent in 2004 to 2.1 percent in 2005. Earlier, China's Ministry
文摘Offshore drilling and production operations can result in spills or leaks of hydrocarbons into seabed sediments, which can potentially contaminate these sediments with oil. If this oil later mi- grates to the water surface it has the potential for negative environmental impacts. For proper contin- gency planning and to avoid larger consequences in the environment, it is essential to understand me- chanisms and rates for hydrocarbon migration from oil containing sediments to the water surface as well as how much will remain trapped in the sediments. It is believed that the amount of oil transported out of the sediment can be affected by tidal pumping, a common form of subterranean groundwater dis- charge (SGD). However, we could find no study experimentally investigating the phenomenon of fluid flow in subsea sediments containing oil and the effects of tidal pumping. This study presents an experi- mental investigation of tidal pumping to determine if it is a possible mechanism that may contribute to the appearance of an oil sheen on the ocean surface above a sediment bed containing oil. An experimen- tal apparatus was constructed of clear PVC pipe allowing for oil migration to be monitored as it flowed out of a sand pack containing oil, while tidal pressure oscillations were applied in three different man- ners. The effect of tidal pumping was simulated via compression of air above the water (which simulated the increasing static head from tidal exchange). Experimental results show that sustained oil release oc- curred from all tests, and tests with oscillating pressure produced for longer periods of time. Further- more, the experimental results showed that the oil migration rate was affected by grain size, oil satura- tion, and oscillation wave type. In all oscillating experiments the rate and ultimate recovery was less than the comparable static experiments. For the conditions studied, the experimental results indicate that with an oscillating pressure on top of a sand pack, movement of a non-replenishing source of oil is sup- pressed by pressure oscillation.