Taking Fe-C binary alloy as an example,based on the multi-phase field model,the nucleation and growth ofδphase,peritectic reaction,peritectic transformation,and the growth of subsequent austenite are simulated.Effect...Taking Fe-C binary alloy as an example,based on the multi-phase field model,the nucleation and growth ofδphase,peritectic reaction,peritectic transformation,and the growth of subsequent austenite are simulated.Effects of the nucleation site of austenite on the peritectic reaction rate and the starting time of the peritectic transformation were studied.The simulation results show that theγphase,as a shell,surrounds theδphase and grows rapidly when the peritectic reaction occurs between the dendriticδgrains,and a layer ofγphase shell is formed aroundδphase after the peritectic reaction.After theδphase is surrounded byγphase completely,the membrane shell separates the L phase from theδphase,so that the phase transfers from peritectic reaction to peritectic transformation.During the peritectic transformation,since the solute diffusion coefficient of the liquid phase is much greater than that of the solid phase,the average growth rate of austenite in the liquid phase is visibly higher than that of theδphase.The peritectic reaction rate is related to the curvature of the nucleation site of theγphase on theδphase grains.The peritectic reaction rate at the large curvatures is faster than that at small curvatures.展开更多
Microscopic stress distribution in a metallic material which has complex microstructure is simulated using a phase field model.The fundamental equations which take into account the coupling effects among phase transfo...Microscopic stress distribution in a metallic material which has complex microstructure is simulated using a phase field model.The fundamental equations which take into account the coupling effects among phase transformation,temperature and stress/strain are used,while thermal effects are neglected to focus on the volumetric change due to phase transformation in this paper.A two-dimensional square region is considered,and the evolution of microscopic stress and the resultant residual stress distribution are calculated using the finite element method.As the phase transformation progresses and grains grow larger,stress is generated around the growing interface.When a grain collides with another one,specifically large stress is observed.Residual stress is finally distributed in the microstructure formed,and apparently large stresses are retained along the grain boundaries. Subsequently,dependency of the stress distribution on microstructure pattern is investigated.First,variously sized square grains are tested,and it reveals that the maximum stress tends to decrease as the grain size becomes smaller.Next,the shapes of the grains are varied.As a result,the stress distribution is remarkably affected,while the maximum stress value does not change so much.More complicated grain arrangement is finally tested with eight or nine grain models.Then,it is revealed as a common feature that large stress is generated along the grain boundaries and that the stress distribution is dependent on the grain arrangement.展开更多
The effects of applied tensile strain on the coherent α_2→O-phase transformation in Ti-Al-Nb alloys are explored bycomputer simulation using a phase-field method. The focus is on the influence of the applied strain ...The effects of applied tensile strain on the coherent α_2→O-phase transformation in Ti-Al-Nb alloys are explored bycomputer simulation using a phase-field method. The focus is on the influence of the applied strain direction onthe microstructure and volume fraction of the O-phase precipitates. It is found that altering applied strain directioncan modify microstructure of Ti-25Al-10～12Nb (at. pct) alloy during α_2→O-phase transformation effectively andfull laminate microstructure in the Ti-25Al-10Nb (at. pct) alloy can be realized by an applied strain only along thedirection 30°away from the α_2 phase <1010> in magnitude equivalent to the stress-free transformation strain. Thesimulation also shows that not only the magnitude of applied strain but also the applied strain direction influencesthe O-phase volume fraction and the effect of strain direction on the volume fraction is up to 25%.展开更多
Solid-state phase transformation is usually associated with excellent mechanical properties in steel materials.A deep understanding of the formation and evolution of phase structure is essential to tailor their servic...Solid-state phase transformation is usually associated with excellent mechanical properties in steel materials.A deep understanding of the formation and evolution of phase structure is essential to tailor their service performance.As a powerful tool for capturing the evolution of complex microstructures,phase-field simulation quantitatively calculates the phase structures evolution without explicit assumptions about transient microstructures.With the development of advanced numerical technology and computing ability,phase-field methods have been successfully applied to solid-state phase transformation in steels and greatly support the research and development of advanced steel materials.The phase-field simulations of solid-phase transformation in steels were summarized,and the future development was proposed.展开更多
Based on the nucleation and growth theory together with the influence of deformation on driving force and nucleation site,a numerical model was developed for predicting deformation-induced transformation(DIT).The nume...Based on the nucleation and growth theory together with the influence of deformation on driving force and nucleation site,a numerical model was developed for predicting deformation-induced transformation(DIT).The numerical results of DIT of 16 MnNb steel was presented and compared with the experimental ones.The calculated results are in agood agreement with the experimental ones,and the best calculated result is obtained when the constantα=0.25 for steel 16 MnNb.展开更多
The existing problems in the manufacture of SWRH82B high carbon steel wire were discussed by sampling and testing the microstructure and properties of the steel from the workshop. To solve the problems, the experiment...The existing problems in the manufacture of SWRH82B high carbon steel wire were discussed by sampling and testing the microstructure and properties of the steel from the workshop. To solve the problems, the experimental parameters for thermal simulation were optimized, and the thermal simulating experiments were carded out on a Gleeblel500 thermal simulator. The process parameters for the manufacture were optimized after analysis of the data, and the productive experiments were performed after the water box in front of the no-twist blocks was reconstructed, to control the temperature of the loop layer. The results from the productive experiments showed that the cooling rate of 10-15℃/s was reasonable before phase transformation, about 5℃/s during phase transformation, and 600-620℃ was the suitable starting temperature for phase transformation. The ultimate strength of the Ф11.0 mm wire was increased to 1150-1170 MPa with an increase of 20-30 MPa, the percentage reduction of section was to 34%-36% with an increase of 1%-3% by testing the finished products after reconstruction.展开更多
The prediction of microstructure constituents and their morphologies is of great importance for the evaluation of material properties and design of advanced materials.There have been considerable efforts to model and ...The prediction of microstructure constituents and their morphologies is of great importance for the evaluation of material properties and design of advanced materials.There have been considerable efforts to model and simulate microstructure evolution using a wide spectrum of models and simulation approaches.This paper initially reviews the atomistic and mesoscale simulation approaches for microstructure evolution,emphasizing their advantages and disadvantages.Atomistic approaches,such as molecular dynamics,are restricted by the scale of the studied system because they are computationally expensive.Continuum mesoscale simulation approaches,such as phase field,cellular automata,and Monte Carlo,have inconsistent phenomenological equations,each of which only describes one aspect of microstructure evolution.To provide comprehensive insight into microstructure evolution,a unified model that is capable of equally evaluating the nucleation and growth processes is required.In this paper,a physics-based model is proposed that incorporates statistical mechanics,the energy conservation law,and the force equilibrium concept to include all aspects of microstructure evolution.A compatible simulation approach is also described to simulate microstructure evolution during thermomechanical treatments.Furthermore,the microstructure evolution of AISI 304 austenitic steel during isothermal heat treatment and fusion welding is simulated and discussed.The use of fundamental physical rules instead of phenomenological equations,together with the real spatial and temporal scales of the proposed model,facilitates the comparison of the simulation results with experimental results.To examine the accuracy of the proposed simulation approach,the isothermal heat treatment simulation results are compared with experimental data over a broad region of temperatures and time periods.展开更多
基金the National Natural Science Foundation of China(Grant Nos.:11504149,51661020)Natural Science Foundation of Gansu Province of China(Grant No.:18JR3RA147).
文摘Taking Fe-C binary alloy as an example,based on the multi-phase field model,the nucleation and growth ofδphase,peritectic reaction,peritectic transformation,and the growth of subsequent austenite are simulated.Effects of the nucleation site of austenite on the peritectic reaction rate and the starting time of the peritectic transformation were studied.The simulation results show that theγphase,as a shell,surrounds theδphase and grows rapidly when the peritectic reaction occurs between the dendriticδgrains,and a layer ofγphase shell is formed aroundδphase after the peritectic reaction.After theδphase is surrounded byγphase completely,the membrane shell separates the L phase from theδphase,so that the phase transfers from peritectic reaction to peritectic transformation.During the peritectic transformation,since the solute diffusion coefficient of the liquid phase is much greater than that of the solid phase,the average growth rate of austenite in the liquid phase is visibly higher than that of theδphase.The peritectic reaction rate is related to the curvature of the nucleation site of theγphase on theδphase grains.The peritectic reaction rate at the large curvatures is faster than that at small curvatures.
文摘Microscopic stress distribution in a metallic material which has complex microstructure is simulated using a phase field model.The fundamental equations which take into account the coupling effects among phase transformation,temperature and stress/strain are used,while thermal effects are neglected to focus on the volumetric change due to phase transformation in this paper.A two-dimensional square region is considered,and the evolution of microscopic stress and the resultant residual stress distribution are calculated using the finite element method.As the phase transformation progresses and grains grow larger,stress is generated around the growing interface.When a grain collides with another one,specifically large stress is observed.Residual stress is finally distributed in the microstructure formed,and apparently large stresses are retained along the grain boundaries. Subsequently,dependency of the stress distribution on microstructure pattern is investigated.First,variously sized square grains are tested,and it reveals that the maximum stress tends to decrease as the grain size becomes smaller.Next,the shapes of the grains are varied.As a result,the stress distribution is remarkably affected,while the maximum stress value does not change so much.More complicated grain arrangement is finally tested with eight or nine grain models.Then,it is revealed as a common feature that large stress is generated along the grain boundaries and that the stress distribution is dependent on the grain arrangement.
文摘The effects of applied tensile strain on the coherent α_2→O-phase transformation in Ti-Al-Nb alloys are explored bycomputer simulation using a phase-field method. The focus is on the influence of the applied strain direction onthe microstructure and volume fraction of the O-phase precipitates. It is found that altering applied strain directioncan modify microstructure of Ti-25Al-10～12Nb (at. pct) alloy during α_2→O-phase transformation effectively andfull laminate microstructure in the Ti-25Al-10Nb (at. pct) alloy can be realized by an applied strain only along thedirection 30°away from the α_2 phase <1010> in magnitude equivalent to the stress-free transformation strain. Thesimulation also shows that not only the magnitude of applied strain but also the applied strain direction influencesthe O-phase volume fraction and the effect of strain direction on the volume fraction is up to 25%.
基金This work was financially supported by the National Natural Science Foundation of China(Nos.52071023,51901013,and 52122408)H.H.Wu also thanks to the financial support from the Fundamental Research Funds for the Central Universities(University of Science and Technology Beijing,Nos.FRF-TP-2021-04C1 and 06500135).
文摘Solid-state phase transformation is usually associated with excellent mechanical properties in steel materials.A deep understanding of the formation and evolution of phase structure is essential to tailor their service performance.As a powerful tool for capturing the evolution of complex microstructures,phase-field simulation quantitatively calculates the phase structures evolution without explicit assumptions about transient microstructures.With the development of advanced numerical technology and computing ability,phase-field methods have been successfully applied to solid-state phase transformation in steels and greatly support the research and development of advanced steel materials.The phase-field simulations of solid-phase transformation in steels were summarized,and the future development was proposed.
文摘Based on the nucleation and growth theory together with the influence of deformation on driving force and nucleation site,a numerical model was developed for predicting deformation-induced transformation(DIT).The numerical results of DIT of 16 MnNb steel was presented and compared with the experimental ones.The calculated results are in agood agreement with the experimental ones,and the best calculated result is obtained when the constantα=0.25 for steel 16 MnNb.
文摘The existing problems in the manufacture of SWRH82B high carbon steel wire were discussed by sampling and testing the microstructure and properties of the steel from the workshop. To solve the problems, the experimental parameters for thermal simulation were optimized, and the thermal simulating experiments were carded out on a Gleeblel500 thermal simulator. The process parameters for the manufacture were optimized after analysis of the data, and the productive experiments were performed after the water box in front of the no-twist blocks was reconstructed, to control the temperature of the loop layer. The results from the productive experiments showed that the cooling rate of 10-15℃/s was reasonable before phase transformation, about 5℃/s during phase transformation, and 600-620℃ was the suitable starting temperature for phase transformation. The ultimate strength of the Ф11.0 mm wire was increased to 1150-1170 MPa with an increase of 20-30 MPa, the percentage reduction of section was to 34%-36% with an increase of 1%-3% by testing the finished products after reconstruction.
文摘The prediction of microstructure constituents and their morphologies is of great importance for the evaluation of material properties and design of advanced materials.There have been considerable efforts to model and simulate microstructure evolution using a wide spectrum of models and simulation approaches.This paper initially reviews the atomistic and mesoscale simulation approaches for microstructure evolution,emphasizing their advantages and disadvantages.Atomistic approaches,such as molecular dynamics,are restricted by the scale of the studied system because they are computationally expensive.Continuum mesoscale simulation approaches,such as phase field,cellular automata,and Monte Carlo,have inconsistent phenomenological equations,each of which only describes one aspect of microstructure evolution.To provide comprehensive insight into microstructure evolution,a unified model that is capable of equally evaluating the nucleation and growth processes is required.In this paper,a physics-based model is proposed that incorporates statistical mechanics,the energy conservation law,and the force equilibrium concept to include all aspects of microstructure evolution.A compatible simulation approach is also described to simulate microstructure evolution during thermomechanical treatments.Furthermore,the microstructure evolution of AISI 304 austenitic steel during isothermal heat treatment and fusion welding is simulated and discussed.The use of fundamental physical rules instead of phenomenological equations,together with the real spatial and temporal scales of the proposed model,facilitates the comparison of the simulation results with experimental results.To examine the accuracy of the proposed simulation approach,the isothermal heat treatment simulation results are compared with experimental data over a broad region of temperatures and time periods.
