Constraint Stabilization and One-Step Correction Method for Dynamical Systems

A computational method of constraint stabilization and correction is introduced. The method is based on the Baumgart＇s one-step method. Constraint conditions are addressed to stabilize and correct the solution. Two examples are given to illustrate the results of the method.

PARALLEL ALGORITHMS OF ONE-LEG METHOD AND ITERATED DEFECT CORRECTION METHODS

The parallel algorithms of iterated defect correction methods (PIDeCM’s) are constructed, which are of efficiency and high order B-convergence for general nonlinear stiff systems in ODE’S. As the basis of constructing and discussing PIDeCM’s. a class of parallel one-leg methods is also investigated, which are of particular efficiency for linear systems.

Investigation on method for measuring dynamic shear modulus of underwater acoustic structure materials

A new method is described to measure the dynamic shear modulus of underwater acoustic structure materials in a small anechoic water tank by using a broadband parametric source, a precise coordinate installation and techniques of signal processing in the frequency range of 20 kHz - 100 kHz. The typical size of material samples is 500×500 mm2. Basic principles, experiment installation and measured results are also presented

Double Exp-Function Method for Multisoliton Solutions of The Tzitzeica-Dodd-Bullough Equation

In this work, it is aimed to find one- and two-soliton solutions to nonlinear Tzitzeica-Dodd-Bullough （TDB） equation. Since the double exp-function method has been widely used to solve several nonlinear evolution equations in mathematical physics, we have also used it with the help of symbolic computation for solving the present equation. The method seems to be easier and more accurate thanks to the recent developments in the field of symbolic computation.

Synthesis of Vanadium Nitride by a One Step Method

Vanadium nitrides were prepared via one step method of carbothermal reduction and nitridation of vanadium trioxide. Thermalgravimetric analysis （TGA） and X-ray diffraction were used to determine the reaction paths of vanadium carbide, namely the following sequential reaction： V2O3→V8C7 in higher temperature stage, the rule of vanadium nitride synthesized was established, and defined conditions of temperature for the production of the carbides and nitrides were determined. Vanadium oxycarbide may consist in the front process of carbothermal reduction of vanadium trioxide. In one step method for vanadium nitride by carbothermal reduction and nitridation of vanadium trioxide, the nitridation process is simultaneous with the carbothermal reduction. A one-step mechanism of the carbothermal reduction with simultaneous nitridation leaded to a lower terminal temperature in nitridation process for vanadium nitride produced, compared with that of carbothermal reduction process without nitridation. The grain size and shape of vanadium nitride were uniform, and had the shape of a cube. The one step method combined vacuum carborization and nitridation （namely two step method） into one process. It simplified the technological process and decreased the costs.

Noether＇s theorem and one-step corrections method for holonomic system

In this paper, a new computational method for improving the accuracy of numerically computed solutions is introduced. The computational method is based on the one-step method and conserved quantities of holonomic systems are considered as kinematical constraints in this method.

One-step quadratic convergence of noninterior continuation method for NCP

A noninterior continuation method is presented, with only the certering step used at each iteration, for nonlinear complementarity problem. It is shown that the algorithm is globally linearly and locally quadratically convergent under certain conditions.

Synthesis of Codon-optimized Human Interleukin-18 Gene by Combination of Chemical and Enzymatic Method

According to the amino acid sequence and codon preference of E. coli, the human interleukin-18（IL-18） gene was optimized to avoid the rare codons. The total length of the synthesized gene is 571 bp; 18 oligonucleotides, DNA fragments were designed and synthesized by the phosphoramidite four-step chemical method. The whole DNA sequence was synthesized by a one-step total gene synthesis method, and then inserted in pUC18 vector. Five positive clones identified by blue-white colony screening were sent to Shanghai Sangon Biological Engineering Technology and Service Co., Ltd. for sequencing. The sequencing result shows that one clone contained the complete correct gene in all the five positive clones.

ONE-CELL-STATE METHOD FOR DETERMINATION OF ELECTRONIC STRUCTURE OF INTERMETALLIC COMPOUNDS

ＩＮＴＲＯＤＵＣＴＩＯＮＩｎｒｅｃｅｎｔｙｅａｒｓ，ｔｈｅＰａｕｌｉｎｇ’ｓｖａｌｅｎｃｅｂｏｎｄ（ＶＢ）ｔｈｅｏｒｙｈａｓｂｅｎｍａｄｅａｇｒｅａｔｐｒｏｇｒｅｓｉｎｄｅｓｉｇｎｉｎｇａｎｄｄｅｔｅｒｍｉｎｉｎｇｔｈｅａｔｏｍｉｃｓｔａｔｅ，ａｎｄ...

Combination prediction method of chaotic time series

In the present paper, we propose an approach of combination prediction of chaotic time series. The method is based on the adding-weight one-rank local-region method of chaotic time series. The method allows us to define an interval containing a future value with a given probability, which is obtained by studying the prediction error distribution. Its effectiveness is shown with data generated by Logistic map.

A CLASS OF r-POINT (r+1)ST-ORDER A-STABLE ONE-BLOCK METHODS WITH DAMPING AT THE INFINITE POINT

This paper presents a class of r-point (r+1)st-order A-stable one-block methods with damping at the infinite point (DIAOB r,r+1 ). Under the conditions of the same order, A-stability, operation count (at each iterative step) and storage space are the same as the methods in , the methods in the paper improve the stability in a neighborhood at the infinite point. And, by using the OOPI method , it possesses much faster rate of convergence for solving systems of nonlinear equations produced by the DIAOB r,r+1 .

Multigrid One-Shot Method for PDE-Constrained Optimization Problems

This paper presents a numerical method for PDE-constrained optimization problems. These problems arise in many fields of science and engineering including those dealing with real applications. The physical problem is modeled by partial differential equations (PDEs) and involve optimization of some quantity. The PDEs are in most cases nonlinear and solved using numerical methods. Since such numerical solutions are being used routinely, the recent trend has been to develop numerical methods and algorithms so that the optimization problems can be solved numerically as well using the same PDE-solver. We present here one such numerical method which is based on simultaneous pseudo-time stepping. The efficiency of the method is increased with the help of a multigrid strategy. Application example is included for an aerodynamic shape optimization problem.

ON THE EXISTENCE AND UNIQUENESS OF SOLUTION OF IMPLICIT HYBRID METHODS

In this paper the existence and uniqueness of the solution of implicit hybrid methods(IHMs)for solving the initial value problems(IVPs)of stiff ordinary differential equations(ODEs)is considered.We provide the coefficient condition and its judging criterion as well as the righthand condition to ensure the existing solution uniquely.

Estimation of vertical diffusion coefficient based on a onedimensional temperature diffusion equation with an inverse method

Diapycnal mixing is important in oceanic circulation. An inverse method in which a semi-explicit scheme is applied to discretize the one-dimensional temperature diffusion equation is established to estimate the vertical temperature diffusion coefficient based on the observed temperature profiles. The sensitivity of the inverse model in the idealized and actual conditions is tested in detail. It can be found that this inverse model has high feasibility under multiple situations ensuring the stability of the inverse model, and can be considered as an efficient way to estimate the temperature diffusion coefficient in the weak current regions of the ocean. Here, the hydrographic profiles from Argo floats are used to estimate the temporal and spatial distribution of the vertical mixing in the north central Pacific based on this inverse method. It is further found that the vertical mixing in the upper ocean displays a distinct seasonal variation with the amplitude decreasing with depth, and the vertical mixing over rough topography is stronger than that over smooth topography It is suggested that the high-resolution profiles from Argo floats and a more reasonable design of the inverse scheme will serve to understand mixing processes.

CHEBYSHEV PSEUDOSPECTRAL DOMAIN DECOMPOSITION METHOD OF ONE－DIMENSIONAL ELLIPTIC PROBLEMS

This paper is devoted to the Chebyshev pseudospectral domain decomposition method of one-dimensional elliptic problems,it is easily applied to complex geometry.The approximate accuracy can be increased by increasing the order of approximation in fixed number of subdomains,rather than by resorting to a further partitioning.The stability and the convergence of this method are proved.

Elastic one-return boundary element method and hybrid elastic thin-slab propagator for strong-contrast media with sharp boundaries

In this paper, we developed the theory and algorithm of an elastic one-way boundary element method（BEM） and a corresponding hybrid elastic thin-slab propagator for earth media with sharp boundaries between strong contrast media. This approach can takes the advantage of accurate boundary condition of BEM and completely overcomes the weak contrast limitation of the perturbationtheory based one-way operator approach. The one-way BEM is a smooth boundary approximation, which avoids huge matrix operations in exact full BEM. In addition, the one-way BEM can model the primary-only transmitted and reflected waves and therefore is a valuable tool in elastic imaging and inversion. Through numerical tests for some simple models,we proved the validity and efficiency of the proposed method.

Study on State of Terbium Ion in Liposome by One order Derivative Fluorescence Quenching Method

The state of Tb3+ is investigated in liposome. When the concentration of PC is below CMC (critical micell concentration), most of Tb3+ is associated with PC, the binding constant is about 3.35×103 L/mol. When the concentration of PC is beyond CMC, most of Tb3+ is dimerized, the dimerization constant is about 3.92×104L/mol. In PC?CH?H2O system, the binding constant of Tb3+?CH complex 2.93×104L/mol is obtained.

Valuation and Determination of Seven and Five Parameters of Photovoltaic Generator by Iterative Method

The mathematical modeling of solar cells is essential for any optimization operation of the efficiency or the diagnosis of photovoltaic generator. The photovoltaic module is generally represented by an equivalent circuit whose parameters are experimentally calculated by using the characteristic current-tension, I-V. The precise determination of these parameters stays a challenge for the researchers, making to a big difference in the models and the digital methods dedicated to their characterizations. In the present paper, We are interested to characterize the parameters of single diode and two diodes models, in order to plan the behavior of the photovoltaic generator under real functioning conditions. We developed an identification method of the parameters using Newton Raphson method by using the software Matlab/Simulink. This method is the faster technique which allows the identification of several parameters and can be used in real time applications. The results of the proposed method show an accordance with the experimental and simulated characteristics of photovoltaic generator.

Professionals’ Perceptions on Construction Progress Measurement Methods Used in Ghana

Progress measurement is cardinal for effective project delivery. It assesses the physical amount of completed work within budgeted cost and manpower performance at a specified stage of the project. Effective progress measurement facilitates progress monitoring, an inevitability for identifying early warning?signs and confirmation of structured work proceeding. Different progress measuring methods are available and used for construction projects. They range from the traditional to the contemporary ones like three-dimensional and four-dimensional models. This paper examines current progress measurement methods used in the Ghanaian construction industry. Eight commonly employed methods were identified from the literature?and?rated by sixty-two construction professionals, practicing with tier one construction firms and construction consultancy services. Relative Important Index ranking and Mann-Whitney?U?test statistics were used to rank and check the consistency of survey responses. Cost Ratio ranked?the?highest, followed by Supervisor’s Opinion and Units?Completed. The fourth-ranked method was Time Ratio, then Incremental Milestone before Start-Finish.?Weighted/Equivalent Units?was at?the penultimate with Earned Value Analysis ranked?the?lowest. The study will not only underscore the relevance of the current project progress measurement practices and provoke prolific debates on their merits, but will also serve as a precursor for critical evaluation of the methods with the view to identifying?barriers militating against realistic progress assessment of construction works.

Clinical Observation on Brachial Plexus Block with “One Injection Two Points” Method Guiding by Ultrasound

OBJECTIVE: To compare the clinical effect of brachial plexus block with "One Injection Two Points" guided under ultrasound and the conventional method guiding by ultrasound. METHODS: 70 patients were randomized evenly into 2 groups, with 35 patients in each group, while the Experiment Group(Group B) received One Injection Two Points" method, the Control Group(Group A) received the conventional method.The nerve block every 5 s, the success rate of anesthesia, the dosage of local anesthetics, second remedial anesthesia, adverse reactions, etc.were recorded. RESULTS: Group B was superior to group A in the success rate of anesthesia; There were 6 patients in group A who required constant pump injection of Remifentanil to remedy, while no patients in Group B needed remedy treatment. There were no serious adverse reactions in both groups.CONCLUSIONS: The clinical effect of brachial plexus block with "One Injection Two Points" method guided under ultrasoundguiding by ultrasound was superior to that of the conventional method.