Bonding enhancement of cold rolling TA1 P-Ti/AA6061 composite plates via surface oxidation treatment

TA1 P-Ti/AA6061 composite plate was produced by oxidizing the surface of the titanium plate and adopting a cold roll bonding process.The results revealed that the oxide film(Ti6O)prepared on the surface of TA1 pure titanium was easy to crack during the cold roll bonding,thereby promoting the formation of an effective mechanical interlock at the interface,which can effectively reduce the minimum reduction rate of the composite plates produced by cold rolling of titanium and aluminium plates.Moreover,the composite plate subjected to oxidation treatment exhibited high shear strength,particularly at a 43%reduction rate,achieving a commendable value of 117 MPa.Based on oxidation treatment and different reduction rates,the annealed composite plates at temperatures of 400,450,and 500°C displayed favorable resistance to interface delamination,highlighting their remarkable strength-plasticity compatibility as evidenced by a maximum elongation of 31.845%.

Interface property of dissimilar Ti-6Al-4V/AA1050 composite laminate made by non-equal channel lateral co-extrusion and heat treatment

The purpose of this paper is to examine the effect of processing parameters and subsequent heat treatments on the microstructures and bonding strengths of Ti-6Al-4V/AA1050 laminations formed via a non-equal channel lateral co-extrusion process.The microstructural evolution and growth mechanism in the diffusion layer were discussed further to optimize the bonding quality by appropriately adjusting process parameters.Scanning electron microscopes(SEM),energy dispersive spectrometer(EDS),and X-ray diffraction(XRD)were used to characterize interfacial diffusion layers.The shear test was used to determine the mechanical properties of the interfacial diffusion layer.The experimental results indicate that it is possible to co-extrusion Ti-6Al-4V/AA1050 compound profiles using non-equal channel lateral co-extrusion.Different heat treatment processes affect the thickness of the diffusion layer.When the temperature and time of heat treatment increase,the thickness of the reaction layers increases dramatically.Additionally,the shear strength of the Ti-6Al-4V/AA1050 composite interface is proportional to the diffusion layer thickness.It is observed that a medium interface thickness results in superior mechanical performance when compared to neither a greater nor a lesser interface thickness.Microstructural characterization of all heat treatments reveals that the only intermetallic compound observed in the diffusion layers is TiAl_(3).Due to the inter-diffusion of Ti and Al atoms,the TiAl_(3) layer grows primarily at AA1050/TiAl_(3) interfaces.

Effect of heat treatment on the microstructure,mechanical properties and fracture behaviors of ultra-high-strength SiC/Al-Zn-Mg-Cu composites

A high-zinc composite,12vol%SiC/Al-13.3 Zn-3.27 Mg-1.07Cu(wt%),with an ultra-high-strength of 781 MPa was success-fully fabricated through a powder metallurgy method,followed by an extrusion process.The effects of solid-solution and aging heat treat-ments on the microstructure and mechanical properties of the composite were extensively investigated.Compared with a single-stage sol-id-solution treatment,a two-stage solid-solution treatment(470℃/1 h+480℃/1 h)exhibited a more effective solid-solution strengthen-ing owing to the higher degree of solid-solution and a more uniform microstructure.According to the aging hardness curves of the com-posite,the optimized aging parameter(100℃/22 h)was determined.Reducing the aging temperature and time resulted in finer and more uniform nanoscale precipitates but only yielded a marginal increase in tensile strength.The fractography analysis revealed that intergranu-lar cracking and interface debonding were the main fracture mechanisms in the ultra-high-strength SiC/Al-Zn-Mg-Cu composites.Weak regions,such as the SiC/Al interface containing numerous compounds and the precipitate-free zones at the high-angle grain boundaries,were identified as significant factors limiting the strength enhancement of the composite.Interfacial compounds,including MgO,MgZn2,and Cu5Zn8,reduced the interfacial bonding strength,leading to interfacial debonding.

Effect of Heat Treatment on Microstructure and Mechanical Properties of Multiscale SiC_p Hybrid Reinforced 6061 Aluminum Matrix Composites

The performance of solid solution aging treatment on aluminum matrix composites prepared by powder metallurgy and reinforced with 6061 aluminum alloy powder as matrix;meanwhile, nano silicon carbide particles(nm Si Cp), submicron silicon carbide particles(1 μm Si Cp) and Ti particles were studied. The Al/Si Cp composite powder was prepared by high-energy ball milling, and then cold-pressed, sintered, hotextruded, and then heat-treated with different solution temperatures and aging times for the extruded composites. Optical microscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy(EDS), X-ray diffractometer(XRD) and extrusion testing were used to analyze and test the microstructure and mechanical properties of aluminum matrix composites. The results show that after the multi-stage solid solution at 530 ℃×2 h+535 ℃×2 h+540 ℃×2 h, the particles are mainly equiaxed grains and uniformly distributed. There is no reinforcement agglomeration, and the surface is dense and the insoluble phase is basically dissolved. In the matrix, the strengthening effect is good, and the hardness and compressive strength are 179.43 HV and 680.42 MPa, respectively. Under this solution process, when the aluminum matrix composites are aged at 170 ℃ for 10 h, the hardness and compressive strength can reach their peaks and increase to 195.82 HV and 721.48 MPa, respectively.

可持续场地倡议(SITES)评价体系在中国城市绿地建设中的研究进展及适用性讨论

建设可持续的城市绿地是风景园林行业实现可持续发展的重要途径。然而,中国目前缺乏指导可持续景观建设的标准体系。可持续场地倡议(SITES)体系的提出和引入为国内相关研究提供了新的切入点。以SITES评价体系为研究对象,概述其起源、主要内容等,明确其在城市绿地项目建设中的应用价值,全面总结了SITES评价体系在国内研究与应用方面的进展,同时深入探讨了其在中国城市绿地建设中的适用性和局限性。SITES在关注“场地”尺度、覆盖全生命周期、设置“门槛”条件以及全球统一标准等方面展现了较强的适用性,然而,在实际应用于中国城市绿地项目时存在一定的局限性,包括SITES标准与国内标准规范的不匹配,分值权重的失衡,缺乏政府相关福利政策支持和推广受限制等问题。

Effect of heat treatment on microstructure,mechanical and tribological properties of in-situ (TiC+TiB)/TC4 composites by casting

To enhance the performance of in-situ synthesized 6vol.%(Ti C+Ti B)/TC4 titanium matrix composites fabricated by casting,a variety of heat treatment processes were carried out.Upon conducting microstructure observations following various heat treatments,it was found that the composites exhibit a basketweave microstructure,consisting of an α phase and a transformed β phase.The sizes of(α+β) phases were found to be refined to varying degrees after the heat treatment processes,while the morphology of Ti B remains largely unchanged and Ti C becomes granulated.Compressive testing revealed that all composites subjected to different heat treatments demonstrate a notable increase in ultimate compressive strength as well as a slight improvement in plasticity compared to the as-cast state.The results of the tribological performance test indicated that the heat-treated composites exhibit lower average friction coefficient,specific wear rate,and worn surface roughness compared to the as-cast composite.Among the heat treatment processes studied,the composite solution heated at 1,150 °C/1 h followed by air cooling,then 950 °C/1 h followed by air cooling,and finally 500 °C/4 h followed by air cooling,demonstrates the highest levels of hardness,compressive strength,and wear resistance.These improvements are attributed to the combined effects of solid solution strengthening,grain refinement,and the pinning of dislocation slip.

Combination treatment of inflammatory bowel disease:Present status and future perspectives

The treatment of patients with inflammatory bowel disease(IBD),especially those with severe or refractory disease,represents an important challenge for the clinical gastroenterologist.It seems to be no exaggeration to say that in these patients,not only the scientific background of the gastroenterologist is tested,but also the abundance of“gifts”that he should possess(insight,intuition,determ-ination,ability to take initiative,etc.)for the successful outcome of the treatment.In daily clinical practice,depending on the severity of the attack,IBD is treated with one or a combination of two or more pharmaceutical agents.These combin-ations include not only the first-line drugs(e.g.,mesalazine,corticosteroids,antibiotics,etc)but also second-and third-line drugs(immunosuppressants and biologic agents).It is a fact that despite the significant therapeutic advances there is still a significant percentage of patients who do not satisfactorily respond to the treatment applied.Therefore,a part of these patients are going to surgery.In recent years,several small-size clinical studies,reviews,and case reports have been published combining not only biological agents with other drugs(e.g.,immunosuppressants or corticosteroids)but also the combination of two biologi-cal agents simultaneously,especially in severe cases.In our opinion,it is at least a strange(and largely unexplained)fact that we often use combinations of drugs in a given patient although studies comparing the simultaneous administration of two or more drugs with monotherapy are very few.As mentioned above,there is a timid tendency in the literature to combine two biological agents in severe cases unresponsive to the applied treatment or patients with severe extraintestinal manifestations.The appropriate dosage,the duration of the administration,the suitable timing for checking the clinical and laboratory outcome,as well as the treatment side-effects,should be the subject of intense clinical research shortly.In this editorial,we attempt to summarize the existing data regarding the already applied combination therapies and to humbly formulate thoughts and suggestions for the future application of the combination treatment of biological agents in a well-defined category of patients.We suggest that the application of biomarkers and artificial intelligence could help in establishing new forms of treatment using the available modern drugs in patients with IBD resistant to treatment.

Working toward an integrated plasticity/network framework for repetitive transcranial magnetic stimulation to inform tailored treatments

Non-invasive brain stimulation techniques(NIBS),including repetitive transcranial magnetic stimulation(rTMS) and transcranial electric stim ulation(tES),are increasingly being adopted clinically for treatment of neuropsychiatric and neurological disorders,albeit with varying success.The rationale behind the use of NIBS has historically been that stim ulation techniques modulate neuronal activity in the targeted region and consequently induce plasticity which can lead to therapeutic outcomes.

Gut flora in multiple sclerosis:implications for pathogenesis and treatment

Multiple sclerosis is an inflammatory disorder chara cterized by inflammation,demyelination,and neurodegeneration in the central nervous system.Although current first-line therapies can help manage symptoms and slow down disease progression,there is no cure for multiple sclerosis.The gut-brain axis refers to complex communications between the gut flo ra and the immune,nervous,and endocrine systems,which bridges the functions of the gut and the brain.Disruptions in the gut flora,termed dys biosis,can lead to systemic inflammation,leaky gut syndrome,and increased susceptibility to infections.The pathogenesis of multiple sclerosis involves a combination of genetic and environmental factors,and gut flora may play a pivotal role in regulating immune responses related to multiple scle rosis.To develop more effective therapies for multiple scle rosis,we should further uncover the disease processes involved in multiple sclerosis and gain a better understanding of the gut-brain axis.This review provides an overview of the role of the gut flora in multiple scle rosis.

Influence of heat treatment on microstructure,mechanical and corrosion behavior of WE43 alloy fabricated by laser-beam powder bed fusion

Magnesium(Mg)alloys are considered to be a new generation of revolutionary medical metals.Laser-beam powder bed fusion(PBF-LB)is suitable for fabricating metal implants withpersonalized and complicated structures.However,the as-built part usually exhibits undesirable microstructure and unsatisfactory performance.In this work,WE43 parts were firstly fabricated by PBF-LB and then subjected to heat treatment.Although a high densification rate of 99.91%was achieved using suitable processes,the as-built parts exhibited anisotropic and layeredmicrostructure with heterogeneously precipitated Nd-rich intermetallic.After heat treatment,fine and nano-scaled Mg24Y5particles were precipitated.Meanwhile,theα-Mg grainsunderwent recrystallization and turned coarsened slightly,which effectively weakened thetexture intensity and reduced the anisotropy.As a consequence,the yield strength and ultimate tensile strength were significantly improved to(250.2±3.5)MPa and(312±3.7)MPa,respectively,while the elongation was still maintained at a high level of 15.2%.Furthermore,the homogenized microstructure reduced the tendency of localized corrosion and favoredthe development of uniform passivation film.Thus,the degradation rate of WE43 parts was decreased by an order of magnitude.Besides,in-vitro cell experiments proved their favorable biocompatibility.

Prospects and challenges for the application of tissue engineering technologies in the treatment of bone infections

Osteomyelitis is a devastating disease caused by microbial infection in deep bone tissue.Its high recurrence rate and impaired restoration of bone deficiencies are major challenges in treatment.Microbes have evolved numerous mechanisms to effectively evade host intrinsic and adaptive immune attacks to persistently localize in the host,such as drug-resistant bacteria,biofilms,persister cells,intracellular bacteria,and small colony variants(SCVs).Moreover,microbial-mediated dysregulation of the bone immune microenvironment impedes the bone regeneration process,leading to impaired bone defect repair.Despite advances in surgical strategies and drug applications for the treatment of bone infections within the last decade,challenges remain in clinical management.The development and application of tissue engineering materials have provided new strategies for the treatment of bone infections,but a comprehensive review of their research progress is lacking.This review discusses the critical pathogenic mechanisms of microbes in the skeletal system and their immunomodulatory effects on bone regeneration,and highlights the prospects and challenges for the application of tissue engineering technologies in the treatment of bone infections.It will inform the development and translation of antimicrobial and bone repair tissue engineering materials for the management of bone infections.

Epidemiological and clinical features,treatment status,and economic burden of traumatic spinal cord injury in China:a hospital-based retrospective study

Traumatic spinal cord injury is potentially catastrophic and can lead to permanent disability or even death.China has the largest population of patients with traumatic spinal cord injury.Previous studies of traumatic spinal cord injury in China have mostly been regional in scope;national-level studies have been rare.To the best of our knowledge,no national-level study of treatment status and economic burden has been performed.This retrospective study aimed to examine the epidemiological and clinical features,treatment status,and economic burden of traumatic spinal cord injury in China at the national level.We included 13,465 traumatic spinal cord injury patients who were injured between January 2013 and December 2018 and treated in 30 hospitals in 11 provinces/municipalities representing all geographical divisions of China.Patient epidemiological and clinical features,treatment status,and total and daily costs were recorded.Trends in the percentage of traumatic spinal cord injuries among all hospitalized patients and among patients hospitalized in the orthopedic department and cost of care were assessed by annual percentage change using the Joinpoint Regression Program.The percentage of traumatic spinal cord injuries among all hospitalized patients and among patients hospitalized in the orthopedic department did not significantly change overall(annual percentage change,-0.5%and 2.1%,respectively).A total of 10,053(74.7%)patients underwent surgery.Only 2.8%of patients who underwent surgery did so within 24 hours of injury.A total of 2005(14.9%)patients were treated with high-dose(≥500 mg)methylprednisolone sodium succinate/methylprednisolone(MPSS/MP);615(4.6%)received it within 8 hours.The total cost for acute traumatic spinal cord injury decreased over the study period(-4.7%),while daily cost did not significantly change(1.0%increase).Our findings indicate that public health initiatives should aim at improving hospitals’ability to complete early surgery within 24 hours,which is associated with improved sensorimotor recovery,increasing the awareness rate of clinical guidelines related to high-dose MPSS/MP to reduce the use of the treatment with insufficient evidence.

Circular RNAs in breast cancer diagnosis,treatment and prognosis

Breast cancer has surpassed lung cancer to become the most common malignancy worldwide.The incidence rate and mortality rate of breast cancer continue to rise,which leads to a great burden on public health.Circular RNAs(circRNAs),a new class of noncoding RNAs(ncRNAs),have been recognized as important oncogenes or suppressors in regulating cancer initiation and progression.In breast cancer,circRNAs have significant roles in tumorigenesis,recurrence and multidrug resistance that are mediated by various mechanisms.Therefore,circRNAs may serve as promising targets of therapeutic strategies for breast cancer management.This study reviews the most recent studies about the biosynthesis and characteristics of circRNAs in diagnosis,treatment and prognosis evaluation,as well as the value of circRNAs in clinical applications as biomarkers or therapeutic targets in breast cancer.Understanding the mechanisms by which circRNAs function could help transform basic research into clinical applications and facilitate the development of novel circRNA-based therapeutic strategies for breast cancer treatment.

Esophageal cancer screening,early detection and treatment:Current insights and future directions

Esophageal cancer ranks among the most prevalent malignant tumors globally,primarily due to its highly aggressive nature and poor survival rates.According to the 2020 global cancer statistics,there were approximately 604000 new cases of esophageal cancer,resulting in 544000 deaths.The 5-year survival rate hovers around a mere 15%-25%.Notably,distinct variations exist in the risk factors associated with the two primary histological types,influencing their worldwide incidence and distribution.Squamous cell carcinoma displays a high incidence in specific regions,such as certain areas in China,where it meets the cost-effect-iveness criteria for widespread endoscopy-based early diagnosis within the local population.Conversely,adenocarcinoma(EAC)represents the most common histological subtype of esophageal cancer in Europe and the United States.The role of early diagnosis in cases of EAC originating from Barrett's esophagus(BE)remains a subject of controversy.The effectiveness of early detection for EAC,particularly those arising from BE,continues to be a debated topic.The variations in how early-stage esophageal carcinoma is treated in different regions are largely due to the differing rates of early-stage cancer diagnoses.In areas with higher incidences,such as China and Japan,early diagnosis is more common,which has led to the advancement of endoscopic methods as definitive treatments.These techniques have demonstrated remarkable efficacy with minimal complications while preserving esophageal functionality.Early screening,prompt diagnosis,and timely treatment are key strategies that can significantly lower both the occurrence and death rates associated with esophageal cancer.

A comprehensive review of lunar lava tube base construction and field research on a potential Earth test site

The Moon,as the closest celestial body to the Earth,plays a pivotal role in the progression of deep space exploration,and the establishment of research outposts on its surface represents a crucial step in this mission.Lunar lava tubes are special underground caves formed by volcanic eruptions and are considered as ideal natural shelters and scientific laboratories for lunar base construction.This paper begins with an in-depth overview of the geological origins,exploration history,and distribution locations of lunar lava tubes.Subsequently,it delves into the presentation of four distinctive advantages and typical concepts for constructing bases within lava tubes,summarizing the ground-based attempts made thus far in lunar lava tube base construction.Field studies conducted on a lava tube in Hainan revealed rock compositions similar to those found during the Apollo missions and clear lava tube structures,making it a promising analog site.Lastly,the challenges and opportunities encountered in the field of geotechnical engineering regarding the establishment of lunar lava tube bases are discussed,encompassing cave exploration technologies,in-situ testing methods,geomechanical properties under lunar extreme environments,base design and structural stability assessment,excavation and reinforcement techniques,and simulated Earth-based lava tube base.

Five commonly used traditional Chinese medicine formulas in the treatment of ulcerative colitis:A network meta-analysis

BACKGROUND Currently,traditional Chinese medicine(TCM)formulas are commonly being used as adjunctive therapy for ulcerative colitis in China.Network meta-analysis,a quantitative and comprehensive analytical method,can systematically compare the effects of different adjunctive treatment options for ulcerative colitis,providing scientific evidence for clinical decision-making.AIM To evaluate the clinical efficacy and safety of commonly used TCM for the treatment of ulcerative colitis(UC)in clinical practice through a network metaanalysis.METHODS Clinical randomized controlled trials of these TCM formulas used for the adjuvant treatment of UC were searched from the establishment of the databases to July 1,2022.Studies that met the inclusion criteria were screened and evaluated for literature quality and risk of bias according to the Cochrane 5.1 standard.The methodological quality of the studies was assessed using ReviewManager(RevMan)5.4,and a funnel plot was constructed to test for publication bias.ADDIS 1.16 statistical software was used to perform statistical analysis of the treatment measures and derive the network relationship and ranking diagrams of the various intervention measures.RESULTS A total of 64 randomized controlled trials involving 5456 patients with UC were included in this study.The adjuvant treatment of UC using five TCM formulations was able to improve the clinical outcome of the patients.Adjuvant treatment with Baitouweng decoction(BTWT)showed a significant effect[mean difference=36.22,95%confidence interval(CI):7.63 to 65.76].For the reduction of tumor necrosis factor in patients with UC,adjunctive therapy with BTWT(mean difference=−9.55,95%CI:−17.89 to−1.41),Shenlingbaizhu powder[SLBZS;odds ratio(OR)=0.19,95%CI:0.08 to 0.39],and Shaoyao decoction(OR=−23.02,95%CI:−33.64 to−13.14)was effective.Shaoyao decoction was more effective than BTWT(OR=0.12,95%CI:0.03 to 0.39),SLBZS(OR=0.19,95%CI:0.08 to 0.39),and Xi Lei powder(OR=0.34,95%CI:0.13 to 0.81)in reducing tumor necrosis factor and the recurrence rate of UC.CONCLUSION TCM combined with mesalazine is more effective than mesalazine alone in the treatment of UC.

Interleukins in liver disease treatment

Cytokines play pleiotropic roles in human health and disease by regulating both innate and adaptive immune responses.Interleukins(ILs),a large group of cytokines,can be divided into seven families,including IL-1,IL-2,IL-6,IL-8,IL-10,IL-12,and IL-17 families.Here,we review the functions of ILs in the pathogenesis and resolution of liver diseases,such as liver inflammation(e.g.,IL-35),alcoholrelated liver disease(e.g.,IL-11),non-alcoholic steatohepatitis(e.g.,IL-22),liver fibrosis(e.g.,Il-17a),and liver cancer(e.g.,IL-8).Overall,IL-1 family members are implicated in liver inflammation induced by different etiologies,such as alcohol consumption,high-fat diet,and hepatitis viruses.IL-2 family members mainly regulate T lymphocyte and NK cell proliferation and activation,and the differentiation of T cells.IL-6 family cytokines play important roles in acute phase response in liver infection,liver regeneration,and metabolic regulation,as well as lymphocyte activation.IL-8,also known as CXCL8,is activated in chronic liver diseases,which is associated with the accumulation of neutrophils and macrophages.IL-10 family members contribute key roles to liver immune tolerance and immunosuppression in liver disease.IL-12 family cytokines influence T-cell differentiation and play an essential role in autoimmune liver disease.IL-17 subfamilies contribute to infection defense,liver inflammation,and Th17 cell differentiation.ILs interact with different type I and type II cytokine receptors to regulate intracellular signaling pathways that mediate their functions.However,most clinical studies are only performed to evaluate IL-mediated therapies on alcohol and hepatitis virus infection-induced hepatitis.More pre-clinical and clinical studies are required to evaluate IL-mediated monotherapy and synergistic therapies.

Understanding Bridging Sites and Accelerating Quantum Efficiency for Photocatalytic CO_(2) Reduction

We report a novel double-shelled nanoboxes photocatalyst architecture with tailored interfaces that accelerate quantum efficiency for photocatalytic CO_(2) reduction reaction(CO_(2)RR)via Mo–S bridging bonds sites in S_(v)–In_(2)S_(3)@2H–MoTe_(2).The X-ray absorption near-edge structure shows that the formation of S_(v)–In_(2)S_(3)@2H–MoTe_(2) adjusts the coordination environment via interface engineering and forms Mo–S polarized sites at the interface.The interfacial dynamics and catalytic behavior are clearly revealed by ultrafast femtosecond transient absorption,time-resolved,and in situ diffuse reflectance–Infrared Fourier transform spectroscopy.A tunable electronic structure through steric interaction of Mo–S bridging bonds induces a 1.7-fold enhancement in S_(v)–In_(2)S_(3)@2H–MoTe_(2)(5)photogenerated carrier concentration relative to pristine S_(v)–In_(2)S_(3).Benefiting from lower carrier transport activation energy,an internal quantum efficiency of 94.01%at 380 nm was used for photocatalytic CO_(2)RR.This study proposes a new strategy to design photocatalyst through bridging sites to adjust the selectivity of photocatalytic CO_(2)RR.

Hydrothermal treatment of pearl millet grains:Effects on nutritional composition,antinutrients and flour properties

Pearl millet(Pennisetum glaucum)is one of the major millets with high nutritional properties.This crop exhibits exceptional resilience to drought and high temperatures.However,the processing of pearl millet poses a significant challenge due to its high lipid content,enzyme activity,and presence of antinutrients.Consequently,it becomes imperative to enhance the quality and prolong the shelf life of pearl millet flour by employing suitable technologies.Hydrothermal treatment in the food industry has long been seen as promising due to its potential to reduce microbial load,inactivate enzymes,and improve nutrient retention.This study aims to investigate the effects of hydrothermal treatment on the quality characteristics of pearl millet.The independent variables of the study were soaking temperature(35,45,55℃),soaking time(2,3,4 h),and steaming time(5,10,15 min).Treatment conditions had a statistically significant effect on nutrient retention.Major antinutrients like tannins and phytates were reduced by 0.99% to 5.94% and 0.36% to 6.00%,respectively,after the treatment.Lipase activity decreased significantly up to 10% with the treatment conditions.The findings of this study could potentially encourage the use of pearl millet flour in the production of various food items and promote the application of hydrothermal treatment in the field of food processing.

Clinical manifestation,lifestyle,and treatment patterns of chronic erosive gastritis:A multicenter real-world study in China

BACKGROUND Although chronic erosive gastritis(CEG)is common,its clinical characteristics have not been fully elucidated.The lack of consensus regarding its treatment has resulted in varied treatment regimens.AIM To explore the clinical characteristics,treatment patterns,and short-term outcomes in CEG patients in China.METHODS We recruited patients with chronic non-atrophic or mild-to-moderate atrophic gastritis with erosion based on endoscopy and pathology.Patients and treating physicians completed a questionnaire regarding history,endoscopic findings,and treatment plans as well as a follow-up questionnaire to investigate changes in symptoms after 4 wk of treatment.RESULTS Three thousand five hundred sixty-three patients from 42 centers across 24 cities in China were included.Epigastric pain(68.0%),abdominal distension(62.6%),and postprandial fullness(47.5%)were the most common presenting symptoms.Gastritis was classified as chronic non-atrophic in 69.9%of patients.Among those with erosive lesions,72.1%of patients had lesions in the antrum,51.0%had multiple lesions,and 67.3%had superficial flat lesions.In patients with epigastric pain,the combination of a mucosal protective agent(MPA)and proton pump inhibitor was more effective.For those with postprandial fullness,acid regurgitation,early satiety,or nausea,a MPA appeared more promising.CONCLUSION CEG is a multifactorial disease which is common in Asian patients and has non-specific symptoms.Gastroscopy may play a major role in its detection and diagnosis.Treatment should be individualized based on symptom profile.