Intelligent Reflecting Surface Assisted Transmission Optimization Strategies in Wireless Networks

Wireless Power Transfer(WPT)technology can provide real-time power for many terminal devices in Internet of Things(IoT)through millimeterWave(mmWave)to support applications with large capacity and low latency.Although the intelligent reflecting surface(IRS)can be adopted to create effective virtual links to address the mmWave blockage problem,the conventional solutions only adopt IRS in the downlink from the Base Station(BS)to the users to enhance the received signal strength.In practice,the reflection of IRS is also applicable to the uplink to improve the spectral efficiency.It is a challenging to jointly optimize IRS beamforming and system resource allocation for wireless energy acquisition and information transmission.In this paper,we first design a Low-Energy Adaptive Clustering Hierarchy(LEACH)clustering protocol for clustering and data collection.Then,the problem of maximizing the minimum system spectral efficiency is constructed by jointly optimizing the transmit power of sensor devices,the uplink and downlink transmission times,the active beamforming at the BS,and the IRS dynamic beamforming.To solve this non-convex optimization problem,we propose an alternating optimization(AO)-based joint solution algorithm.Simulation results show that the use of IRS dynamic beamforming can significantly improve the spectral efficiency of the system,and ensure the reliability of equipment communication and the sustainability of energy supply under NLOS link.

Reliable Data Collection Model and Transmission Framework in Large-Scale Wireless Medical Sensor Networks

Large-scale wireless sensor networks(WSNs)play a critical role in monitoring dangerous scenarios and responding to medical emergencies.However,the inherent instability and error-prone nature of wireless links present significant challenges,necessitating efficient data collection and reliable transmission services.This paper addresses the limitations of existing data transmission and recovery protocols by proposing a systematic end-to-end design tailored for medical event-driven cluster-based large-scale WSNs.The primary goal is to enhance the reliability of data collection and transmission services,ensuring a comprehensive and practical approach.Our approach focuses on refining the hop-count-based routing scheme to achieve fairness in forwarding reliability.Additionally,it emphasizes reliable data collection within clusters and establishes robust data transmission over multiple hops.These systematic improvements are designed to optimize the overall performance of the WSN in real-world scenarios.Simulation results of the proposed protocol validate its exceptional performance compared to other prominent data transmission schemes.The evaluation spans varying sensor densities,wireless channel conditions,and packet transmission rates,showcasing the protocol’s superiority in ensuring reliable and efficient data transfer.Our systematic end-to-end design successfully addresses the challenges posed by the instability of wireless links in large-scaleWSNs.By prioritizing fairness,reliability,and efficiency,the proposed protocol demonstrates its efficacy in enhancing data collection and transmission services,thereby offering a valuable contribution to the field of medical event-drivenWSNs.

On Differentiation Among Pilot Signals of Multiple Mobile Targets in Retro-Reflective Beamforming for Wireless Power Transmission

An experimental study is conducted on several retro-reflective beamforming schemes for wireless power transmission to multiple wireless power receivers(referred to herein as“targets”).The experimental results demonstrate that,when multiple targets broadcast continuous-wave pilot signals at respective frequencies,a retro-reflective wireless power transmitter is capable of generating multiple wireless power beams aiming at the respective targets as long as the multiple pilot signals are explicitly separated from one another by the wireless power transmitter.However,various practical complications are identified when the pilot signals of multiple targets are not appropriately differentiated from each other by the wireless power transmitter.Specifically,when multiple pilot signals are considered to be carried by the same frequency,the wireless power transmission performance becomes heavily dependent on the interaction among the pilot signals,which is highly undesirable in practice.In conclusion,it is essential for a retro-reflective wireless power transmitter to explicitly discriminate multiple targets’pilot signals among each other.

Power Line Monitoring Data Transmission Using Wireless Sensor Network

The WSN used in power line monitoring is long chain structure, and the bottleneck near the Sink node is more obvious. In view of this, A Sink nodes’ cooperation mechanism is presented. The Sink nodes from different WSNs are adjacently deployed. Adopting multimode and spatial multiplexing network technology, the network is constructed into multi-mode-level to achieve different levels of data streaming. The network loads are shunted and the network resources are rationally utilized. Through the multi-sink nodes cooperation, the bottlenecks at the Sink node and its near several jump nodes are solved and process the competition of communication between nodes by channel adjustment. Finally, the paper analyzed the method and provided simulation experiment results. Simulation results show that the method can solve the funnel effect of the sink node, and get a good QoS.

Tracking Galloping Profile of Transmission Lines Using Wireless Inertial Measurement Units

Galloping of power transmission lines might bring about huge damage such as massive power outage and collapse of the transmission towers. To realize forecast of the galloping and provide data for study on the galloping mechanism, this paper proposes an online monitoring system for tracking galloping profile of power transmission lines based on wireless inertial measurement units (WIMUs). The system is composed of three modules: wireless inertial measurement nodes, monitoring base station, and remote monitoring station. After detailing the hardware system, the corresponding software which positions and displays galloping profile of the transmission line in real-time is outlined. The feasibility of the proposed on-line monitoring system is demonstrated through a series of experiments at the State Grid Key Laboratory of Power Overhead Transmission Line Galloping (Zhengzhou, China) by taking into account different vibration patterns.

Autonomous UAV 3D trajectory optimization and transmission scheduling for sensor data collection on uneven terrains

This paper considers a time-constrained data collection problem from a network of ground sensors located on uneven terrain by an Unmanned Aerial Vehicle(UAV),a typical Unmanned Aerial System(UAS).The ground sensors harvest renewable energy and are equipped with batteries and data buffers.The ground sensor model takes into account sensor data buffer and battery limitations.An asymptotically globally optimal method of joint UAV 3D trajectory optimization and data transmission schedule is developed.The developed method maximizes the amount of data transmitted to the UAV without losses and too long delays and minimizes the propulsion energy of the UAV.The developed algorithm of optimal trajectory optimization and transmission scheduling is based on dynamic programming.Computer simulations demonstrate the effectiveness of the proposed algorithm.

OFDM Wireless Downhole Transmission Systems and Proposed SLM Method for PAPR Reduction

At present, mud pulse transmission systems are widely used in downhole data transmission. But the systems are very low in transmission efficiency, only 5-10 bits/s, with very large anti-inter-symbol-interference (ISI). It cannot meet high requirements for high-speed transmission of modern logging system. The development of communication technology has laid some foundation for this requirement. For this purpose, the Orthogonal Frequency Division Multiplexing (OFDM) Wireless Downhole Transmission Systems are proposed for the first time because of their high transmission rate, anti-inter-symbol-interference (ISI), and high spectral efficiency, etc. Due to non-linear power amplifier (PA) of logging systems with limited dynamic range, the drawbacks of high peak-average power ratio (PAPR) may outweigh all the potential benefits of OFDM wireless downhole transmission systems. Selective mapping (SLM) method can reduce the PAPR of OFDM logging signals without distortion. But at the receiver, the conventional SLM method needs exact bits of side information (SI) to recover the data signal. The probability of erroneous SI detection has a significant influence on the error performance of the system. And individual transmissions of SI result in the reduction of bandwidth efficiency. To restore the exact data signal, our scheme codes the SI bits by linear block codes (LBC), and is easily decoded by syndrome decoding. And then the coding SI bits are superimposed onto the logging signals to omit SI bits transmission. The theory and simulation results show that the proposed method has better performance than the conventional one. Accordingly, the OFDM wireless downhole transmission systems can tackle the high PAPR problem, and highten the transmission rate of logging signals.

A New Method to Improve Performance of Cooperative Underwater Acoustic Wireless Sensor Networks via Frequency Controlled Transmission Based on Length of Data Links

In this paper a new method to improve performance of cooperative underwater acoustic (UWA) sensor networks will be introduced. The method is based on controlling and optimizing carrier frequencies which are used in data links between network nods. In UWA channels Pathloss and noise power spectrum density (psd) are related to carrier frequency. Therefore, unlike radio communications, in UWA Communications signal to noise ratio (SNR) is related to frequency besides propagation link length. In such channels an optimum frequency in whole frequency band and link lengths cannot be found. In Cooperative transmission, transmitter sends one copy of transmitted data packets to relay node. Then relay depending on cooperation scheme, amplifies or decodes each data packet and retransmit it to destination. Receiver uses and combines both received signals to estimate transmitted data. This paper wants to propose a new method to decrease network power consumptions by controlling and sub-optimizing transmission frequency based on link length. For this purpose, underwater channel parameters is simulated and analyzed in 1km to 10km lengths (midrange channel). Then link lengths sub categorized and in each category, optimum frequency is computed. With these sub optimum frequencies, sensors and base station can adaptively control their carrier frequencies based on link length and decrease network’s power consumptions. Finally Different Cooperative transmission schemes “Decode and Forward (DF)” and “Amplify and Forward (AF)”, are simulated in UWA wireless Sensor network with and without the new method. In receiver maximum ratio combiner (MRC) is used to combining received signals and making data estimations. Simulations show that the new method, called AFC cooperative UWA communication, can improve performance of underwater acoustic wireless sensor networks up to 40.14%.

Design and Optimization of Inductive Wireless Power Transmission System

The inductive wireless power transmission system is actually applied to the principle of magnetic field coupling, com- bined with the flexibility of the electrical equipment to achieve flexible and safe power supply. In the realization process of wird^ power transmission, the key point lies in the transmission efficiency and power transmission capability. However, wireless trans-mission still has some disadvantages in these two aspects. In this case, there is an air gap between the transmitting winding and the receiving winding. If it is too large and the coupling coefficient is too low, in view of this situation, it is necessary to carry out re-search from aspects such as raising the coupling coefficient and controlling the air gap. The article firstly describes the development ofwireless power transmission technology and transmission principles, etc. Secondly, it analyzes the output control ofwireless power fransmission systems. Uird,it conducts simulation analysis using loosely coupling transfomers and proposes an optimized solution. The simulation design and inspection process were proposed. The main purpose of this paper is to analyze the current wireless energy transmission system and clarify the direction in which it should be strengthened. The significance of this study is to provide a feasible direction for the further optimization of the wireless energy transmission system.

Network Coding-based Reliable Broadcast Transmission in Wireless Networks

Recently, network coding has been applied to the loss recovery of reliable broadcast transmission in wireless networks. Since it was proved that fi nding the optimal set of lost packets for XOR-ing is a complex NP-complete problem, the available time-based retransmission scheme and its enhanced retransmission scheme have exponential computational complexity and thus are not scalable to large networks. In this paper, we present an efficient heuristic scheme based on hypergraph coloring and also its enhanced heuristic scheme to improve the transmission efficiency. Basically, our proposed schemes fi rst create a hypergraph according to the packet-loss matrix. Then our schemes solve the problem of generating XORed packets by coloring the edges of hypergraph. Extensive simulation results demonstrate that, the heuristic scheme based on hypergraph coloring and its enhanced scheme can achieve almost the same transmission efficiency as the available ones, but have much lower computational complexity, which is very important for the wireless devices without high computation capacity.

Gradient based restoration of coal mine images obtained by underground wireless transmissions

Curvature-driven diffusion (CDD) principles were used to develop a novel gradient based image restora- tion algorithm. The algorithm fills in blocks of missing data in a wireless image after transmission through the network. When images are transmitted over fading channels, especially in the severe circum- stances of a coal mine, blocks of the image may be destroyed by the effects of noise. Instead of using com- mon retransmission query protocols the lost data is reconstructed by using the adaptive curvature-driven diffusion (ACDD) image restoration algorithm in the gradient domain of the destroyed image. Missing blocks are restored by the method in two steps: In step one, the missing blocks are filled in the gradient domain by the ACDD algorithm; in step two, and the image is reconstructed from the reformed gradients by solving a Poisson equation. The proposed method eliminates the staircase effect and accelerates the convergence rate. This is demonstrated by experimental results.

Battery Charger for Electric Vehicles based on a Wireless Power Transmission

In this paper,the case of a battery charger for electric vehicles based on a wireless power transmission is addressed.The specificity of every stage of the overall system is presented.Based on calculated and measured results,relevant capacitive compensations of the transformer and models are suggested and discussed in order to best match the operating mode and aiming at simplifying as much as possible the control and the electronics of the charger.

Secure Transmission Scheme Based on Dual-Thresholds for Simultaneous Wireless Information and Power Transfer

This paper studies a simultaneous wireless information and power transfer system with multiple external eavesdroppers and internal curious users.We model the random network by Poisson cluster process in consideration of the case where eavesdroppers hide around certain targets.Focusing on the users that work in harvesting-transmitting mode with time switching receivers,we establish communication model via time division multiple access.On this basis,we propose a lightweight secure transmission scheme based on dual-thresholds for physical-layer security enhancement,which consists of two protocols applied to the downlink(DL) and uplink(UL) transmission respectively.In the DL,we design a dynamic information-power switching transmission protocol based on signal-to-noise ratio threshold,which provides an opportunistic approach to reform the fixed period allocation of information and power transfer;in the UL,an energy threshold is proposed for users to control the transmission,which is called a user-led on-off transmission protocol.Furthermore,we give a comprehensive performance analysis for the proposed scheme in terms of delay,reliability,security and secrecy throughput.Based on the analysis results,we optimize the two thresholds and the DL-UL allocationcoefficient to maximize the secrecy throughput.Simulation results show the proposed scheme can bring about a substantial secrecy gain.

Best-retransmission count selection for environment optimization over wireless heterogeneous networks

This paper proposes an environment-aware best- retransmission count selected optimization control scheme over IEEE 802.11 multi-hop wireless networks. The proposed scheme predicts the wireless resources by using statistical channel state and provides maximum retransmission count optimization based on wireless channel environment state to improve the packet delivery success ratio. The media access control （MAC） layer selects the best-retransmission count by perceiving the types of packet loss in wireless link and using the wireless channel charac- teristics and environment information, and adjusts the packet for- warding adaptively aiming at improving the packet retransmission probability. Simulation results show that the best-retransmission count selected scheme achieves a higher packet successful delivery percentage and a lower packet collision probability than the corresponding traditional MAC transmission control protocols.

Parallel-Transmission: A New Usage of Multi-Radio Diversity in Wireless Mesh Network

To fully utilize the diversity of multi-radio, a new parallel transmission method for wireless mesh network is proposed. Compared with conventional packet transmission which follows “one flow on one radio”, it uses the radio diversity to transmit the packets on different radios simultaneously. Three components are presented to achieve parallel-transmission, which are control module, selection module and schedule module. A localized selecting algorithm selects the right radios based on the quality of wireless links. Two kinds of distributed scheduling algorithms are implemented to transmit packets on the selected radios. Finally, a parallel-adaptive routing metric is presented. Simulation results by NS2 show that this parallel-transmission scheme could enhance the average throughput of network by more than 10%.

Joint Detection for Image Transmission Based on Schur Algorithm over Wireless Sensor Network

To achieve much efficient multimedia transmission over an error-prone wireless network, there are still some problem must to be solved, especially in energy limited wireless sensor network. In this paper, we propose a joint detection based on Schur Algorithm for image wireless transmission over wireless sensor network. To eliminate error transmissions and save transmission energy, we combine Schur algorithm with joint dynamic detection for wireless transmission of JPEG 2000 encoded image which we proposed in [1]. Schur algorithm is used to computing the decomposition of system matrix to decrease the computational complexity. We de-scribe our transmission protocol, and report on its performance evaluation using a simulation testbed we have designed for this purpose. Our results clearly indicate that our method could approach efficient images transmission in wireless sensor network and the transmission errors are significantly reduced when compared to regular transmissions.

Multi-Source Spinal Coding for Coded Caching Multicast Transmissions in Wireless Networks

Recently,coded caching has been treated as a promising technique to alleviate the traffic burden in wireless networks.To support high efficient coded caching multicast transmissions,the time-varying heterogeneous channel conditions need to be considered.In this paper,a practical and novel multi-source spinal coding(MSSC)scheme is developed for coded caching multicast transmissions under heterogeneous channel conditions.By exploring joint design of network coding and spinal coding(SC),MSSC can achieve unequal link rates in multicast transmissions for different users.Moreover,by leveraging the rateless feature of SC in our design,MSSC can well adapt the link rates of all users in multicast transmissions without any feedback of time-varying channel conditions.A maximum likelihood(ML)based decoding process for MSSC is also developed,which can achieve a linear complexity with respect to the user number in the multicast transmission.Simulation results validate the effectiveness of the MSSC scheme.Compared to the existing scheme,the sum rate of MSSC in multicast transmissions is improved by about 20%.When applying MSSC in coded caching systems,the total transmission time can be reduced by up to 48% for time-varying channels.

A high rectification efficiency Si_(0.14)Ge_(0.72)Sn_(0.14)-Ge_(0.82)Sn_(0.18)-Ge quantum structure n-MOSFET for 2.45 GHz weak energy microwave wireless energy transmission

The design strategy and efficiency optimization of a Ge-based n-type metal-oxide-semiconductor field-effect transistor(n-MOSFET)with a Si_(0.14)Ge_(0.72)Sn_(0.14)-Ge_(0.82)Sn_(0.18)-Ge quantum structure used for 2.45 GHz weak energy microwave wireless energy transmission is reported.The quantum structure combined withδ-doping technology is used to reduce the scattering of the device and improve its electron mobility;at the same time,the generation of surface channels is suppressed by the Si_(0.14)Ge_(0.72)Sn_(0.14) cap layer.By adjusting the threshold voltage of the device to 91 mV,setting the device aspect ratio to 1μm/0.4μm and adopting a novel diode connection method,the rectification efficiency of the device is improved.With simulation by Silvaco TCAD software,good performance is displayed in the transfer and output characteristics.For a simple half-wave rectifier circuit with a load of 1 pf and 20 kΩ,the rectification efficiency of the device can reach 7.14%at an input power of-10 dBm,which is 4.2 times that of a Si MOSFET(with a threshold voltage of 80 mV)under the same conditions;this device shows a better rectification effect than a Si MOSFET in the range of-30 dBm to 6.9 dBm.

Retro-reflective Beamforming Technique with Applications in Wireless Power Transmission

Retro reflective beamforming technique has the potential of enabling efficient wireless power transmission over long distance(on the order of meters and even kilometers).In retro reflective beamforming,wireless power transmission is guided by pilot signal:Based upon pilot signal broadcasted by a wireless power receiver,a wireless power transmitter delivers focused microwave power beam(s)onto the location of wireless power receiver.When the wireless power receiver’s location is not fixed or when the wireless power receiver’s location is unknown to the wireless power transmitter,the microwave power beam would follow the wireless power receiver’s location dynamically as long as the wireless power receiver broadcasts pilot signal periodically.This paper reviews our research endeavors in recent years on retro reflective beamforming technique targeting three applications:(1)wireless charging for low power mobile/portable electronic devices,(2)space solar power satellites(SSPS)application,and(3)wireless charging in fully enclosed space.The feasibility and potential of retro reflective beamforming technique with applications in wireless power transmission are demonstrated by some preliminary experimental results.

Design of intelligent detecting system based on wireless transmission

An intelligent detecting system based on wireless transmission is designed. Its hardware includes the card reading module, the wireless digital transmission module, the LCD module, the random password keyboard module and a 16×16 lattice word database based on e-Flash MM36SB020. Its software is a communication protocol between the central control computer and the entrance management base station. To resolve the conflicting problems occurred during the data transmission, a method of delaying time at random is proposed.