不同海域Custom450高强度不锈钢的腐蚀规律研究

目的 研究Custom450钢在青岛、舟山、厦门及三亚等4个海域大气和飞溅环境中的自然腐蚀规律。方法 采用形貌分析、腐蚀速率、点腐蚀深度分析等方法对Custom450钢在上述4个海域大气和飞溅区的腐蚀规律进行研究。结果 Custom450钢在4个海域大气环境的年平均腐蚀速率相当,且未观察到有点蚀现象发生,舟山海域的年平均腐蚀速率最小,为0.001 41 mm/a,三亚海域的年平均腐蚀速率最大,为0.001 54 mm/a。4个海域飞溅区的年平均腐蚀速率范围为0.0021~0.0028mm/a,舟山海域的年平均腐蚀速率为0.002 1 mm/a,平均及最大点腐蚀深度分别为5.7μm和25.99μm,均低于其他3个海域。结论 Custom450钢在4个海域的大气环境暴露1 a后,未发现明显的腐蚀现象,表明该钢短期内在上述4个海域海洋大气环境中具有良好的耐蚀性。在飞溅环境中的腐蚀速率高于大气环境,且有明显的点腐蚀现象发生,钢中未溶的NbC相会促进点腐蚀现象的发生。

A novel integrated microfluidic chip for on-demand electrostatic droplet charging and sorting

On-demand droplet sorting is extensively applied for the efficient manipulation and genome-wide analysis of individual cells.However,state-of-the-art microfluidic chips for droplet sorting still suffer from low sorting speeds,sample loss,and labor-intensive preparation procedures.Here,we demonstrate the development of a novel microfluidic chip that integrates droplet generation,on-demand electrostatic droplet charging,and high-throughput sorting.The charging electrode is a copper wire buried above the nozzle of the microchannel,and the deflecting electrode is the phosphate buffered saline in the microchannel,which greatly simplifies the structure and fabrication process of the chip.Moreover,this chip is capable of high-frequency droplet generation and sorting,with a frequency of 11.757 kHz in the drop state.The chip completes the selective charging process via electrostatic induction during droplet generation.On-demand charged microdroplets can arbitrarilymove to specific exit channels in a three-dimensional(3D)-deflected electric field,which can be controlled according to user requirements,and the flux of droplet deflection is thereby significantly enhanced.Furthermore,a lossless modification strategy is presented to improve the accuracy of droplet deflection or harvest rate from 97.49% to 99.38% by monitoring the frequency of droplet generation in real time and feeding it back to the charging signal.This chip has great potential for quantitative processing and analysis of single cells for elucidating cell-to-cell variations.

Joint Optimization for on-Demand Deployment of UAVs and Spectrum Allocation in UAVs-Assisted Communication

To improve the efficiency and fairness of the spectrum allocation for ground communication assisted by unmanned aerial vehicles(UAVs),a joint optimization method for on-demand deployment and spectrum allocation of UAVs is proposed,which is modeled as a mixed-integer non-convex optimization problem(MINCOP).An algorithm to estimate the minimum number of required UAVs is firstly proposed based on the pre-estimation and simulated annealing.The MINCOP is then decomposed into three sub-problems based on the block coordinate descent method,including the spectrum allocation of UAVs,the association between UAVs and ground users,and the deployment of UAVs.Specifically,the optimal spectrum allocation is derived based on the interference mitigation and channel reuse.The association between UAVs and ground users is optimized based on local iterated optimization.A particle-based optimization algorithm is proposed to resolve the subproblem of the UAVs deployment.Simulation results show that the proposed method could effectively improve the minimum transmission rate of UAVs as well as user fairness of spectrum allocation.

Mass Customization and Design for High Density Indemnificatory Housing in China

The use of computer in architectural design shouldn’t sacrifice the pursuit of a human-oriented built environment.The technological applications should be legitimated by the objectives and motivations in multiple dimensions,but not abuse its generative power against the social and cultural interests.This article is based upon our synthetic computational design research for high density indemnificatory housing in China(Fig.1),which challenges the conventional standard design for large scale social housing in the Industrial Era,and reflects our exploration for innovative,multi-disciplinary,systematic and synthetic design in the new design paradigm of computation.It also promotes to shift the privilege of cutting-edge design techniques and avant-garde concepts from the“High(end)Architecture”to the ordinary architecture during the unprecedented built-environment development in China.Architectural design should have no discrimination between the Olympic stadiums in the capital and the social housing in the subordinate developed cities,as they both need to be innovative and meaningful.The final design research outputs address sustainable transformation initiated by the residents during the whole life span of the housing.We believe that the human factor(including stakeholders,users,designers and builders)is even more important in architectural design,city planning,urban design,landscape and interior design while technology development is accelerating.Conceptualization,imagination and systemization would become significant pacemakers which perpetuate design innovation.

Product family modeling technology for customized cosmetic packaging design based on basic-element theory

Background:As the market demands change,SMEs(small and medium-sized enterprises)have long faced many design issues,including high costs,lengthy cycles,and insufficient innovation.These issues are especially noticeable in the domain of cosmetic packaging design.Objective:To explore innovative product family modeling methods and configuration design processes to improve the efficiency of enterprise cosmetic packaging design and develop the design for mass customization.Methods:To accomplish this objective,the basic-element theory has been introduced and applied to the design and development system of the product family.Results:By examining the mapping relationships between the demand domain,functional domain,technology domain,and structure domain,four interrelated models have been developed,including the demand model,functional model,technology model,and structure model.Together,these models form the mechanism and methodology of product family modeling,specifically for cosmetic packaging design.Through an analysis of a case study on men’s cosmetic packaging design,the feasibility of the proposed product family modeling technology has been demonstrated in terms of customized cosmetic packaging design,and the design efficiency has been enhanced.Conclusion:The product family modeling technology employs a formalized element as a module configuration design language,permeating throughout the entire development cycle of cosmetic packaging design,thus facilitating a structured and modularized configuration design process for the product family system.The application of the basic-element principle in product family modeling technology contributes to the enrichment of the research field surrounding cosmetic packaging product family configuration design,while also providing valuable methods and references for enterprises aiming to elevate the efficiency of cosmetic packaging design for the mass customization product model.

Customized scaffolds for large bone defects using 3D‑printed modular blocks from 2D‑medical images

Additive manufacturing(AM)has revolutionized the design and manufacturing of patient-specific,three-dimensional(3D),complex porous structures known as scaffolds for tissue engineering applications.The use of advanced image acquisition techniques,image processing,and computer-aided design methods has enabled the precise design and additive manufacturing of anatomically correct and patient-specific implants and scaffolds.However,these sophisticated techniques can be timeconsuming,labor-intensive,and expensive.Moreover,the necessary imaging and manufacturing equipment may not be readily available when urgent treatment is needed for trauma patients.In this study,a novel design and AM methods are proposed for the development of modular and customizable scaffold blocks that can be adapted to fit the bone defect area of a patient.These modular scaffold blocks can be combined to quickly form any patient-specific scaffold directly from two-dimensional(2D)medical images when the surgeon lacks access to a 3D printer or cannot wait for lengthy 3D imaging,modeling,and 3D printing during surgery.The proposed method begins with developing a bone surface-modeling algorithm that reconstructs a model of the patient’s bone from 2D medical image measurements without the need for expensive 3D medical imaging or segmentation.This algorithm can generate both patient-specific and average bone models.Additionally,a biomimetic continuous path planning method is developed for the additive manufacturing of scaffolds,allowing porous scaffold blocks with the desired biomechanical properties to be manufactured directly from 2D data or images.The algorithms are implemented,and the designed scaffold blocks are 3D printed using an extrusion-based AM process.Guidelines and instructions are also provided to assist surgeons in assembling scaffold blocks for the self-repair of patient-specific large bone defects.

Building Custom Spreadsheet Functions with Python: End-User Software Engineering Approach

End-user computing empowers non-developers to manage data and applications, enhancing collaboration and efficiency. Spreadsheets, a prime example of end-user programming environments widely used in business for data analysis. However, Excel functionalities have limits compared to dedicated programming languages. This paper addresses this gap by proposing a prototype for integrating Python’s capabilities into Excel through on-premises desktop to build custom spreadsheet functions with Python. This approach overcomes potential latency issues associated with cloud-based solutions. This prototype utilizes Excel-DNA and IronPython. Excel-DNA allows creating custom Python functions that seamlessly integrate with Excel’s calculation engine. IronPython enables the execution of these Python (CSFs) directly within Excel. C# and VSTO add-ins form the core components, facilitating communication between Python and Excel. This approach empowers users with a potentially open-ended set of Python (CSFs) for tasks like mathematical calculations, statistical analysis, and even predictive modeling, all within the familiar Excel interface. This prototype demonstrates smooth integration, allowing users to call Python (CSFs) just like standard Excel functions. This research contributes to enhancing spreadsheet capabilities for end-user programmers by leveraging Python’s power within Excel. Future research could explore expanding data analysis capabilities by expanding the (CSFs) functions for complex calculations, statistical analysis, data manipulation, and even external library integration. The possibility of integrating machine learning models through the (CSFs) functions within the familiar Excel environment.

Corneal collagen cross-linking in patients with keratoconus from the Dresden protocol to customized solutions:theoretical basis

Keratoconus is an ectatic condition characterized by gradual corneal thinning,corneal protrusion,progressive irregular astigmatism,corneal fibrosis,and visual impairment.The therapeutic options regarding improvement of visual function include glasses or soft contact lenses correction for initial stages,gas-permeable rigid contact lenses,scleral lenses,implantation of intrastromal corneal ring or corneal transplants for most advanced stages.In keratoconus cases showing disease progression corneal collagen crosslinking(CXL)has been proven to be an effective,minimally invasive and safe procedure.CXL consists of a photochemical reaction of corneal collagen by riboflavin stimulation with ultraviolet A radiation,resulting in stromal crosslinks formation.The aim of this review is to carry out an examination of CXL methods based on theoretical basis and mathematical models,from the original Dresden protocol to the most recent developments in the technique,reporting the changes proposed in the last 15y and examining the advantages and disadvantages of the various treatment protocols.Finally,the limits of non-standardized methods and the perspectives offered by a customization of the treatment are highlighted.

Omni-Channel Retailing and Firm Performance from a Customer Lifetime Value Perspective

In the digital era,retailers are keen to find out whether omni-channel retailing helps improve long-term firm performance.In this paper,we employ machine learning techniques on a large consumption data set in order to measure customer lifetime value(CLV)as the basis for determining long-term firm performance,and we provide an empirical analysis of the relationship between omni-channel retailing and CLV.The results suggest that omni-channel retailing may effectively enhance CLV.Further analysis reveals that this process is influenced by heterogeneous consumer requirements and that significant differences exist in the extent to which the omni-channel transition may influence CLV depending on consumer preferences for diversity of commodities,sensitivity to the cost of contract performance,and sensitivity to warehousing costs.Hence,retailers should provide consumers with a complete portfolio of goods and services based on target consumers’heterogeneous requirements in order to increase omni-channel efficiency.

Ethnic Customs and Rural Tourism Development in Xinbin Manchu Autonomous County of Fushun City

The development of ethnic minority tourism is currently a hot topic in domestic tourism development.As an important component of Chinese civilization,the Manchu people have created brilliant culture in the long river of historical development.As the hometown of the Manchu people,Fushun has unique folk cultural tourism resources and a strong ethnic flavor.Nowadays,under the promotion of the rural revitalization strategy,the construction of new rural areas is constantly developing,and rural tourism is gradually becoming a new industry.Therefore,in the context of the increasingly prosperous rural tourism industry,it has become increasingly important to combine the ethnic customs of Manchu culture with rural tourism.Taking the ethnic customs and integrated development of rural tourism in Xinbin Manchu Autonomous County of Fushun City,Liaoning Province as the research object,this paper mainly sorts out the current situation and characteristics of rural tourism development in the region,systematically explores the problems in development and how to further optimize development,and proposes new models suitable for the development of folk tourism in Xinbin of Fushun,in order to achieve maximum economic and social benefits and provide a reference for promoting the development of tourism in the region.

The User Analysis of Amazon Using Artificial Intelligence at Customer Churn

Customer churns remains a key focus in this research, using artificial intelligence-based technique of machine learning. Research is based on the feature-based analysis four main features were used that are selected on the basis of our customer churn to deduct the meaning full analysis of the data set. Data-set is taken from the Kaggle that is about the fine food review having more than half a million records in it. This research remains on feature based analysis that is further concluded using confusion matrix. In this research we are using confusion matrix to conclude the customer churn results. Such specific analysis helps e-commerce business for real time growth in their specific products focusing more sales and to analyze which product is getting outage. Moreover, after applying the techniques, Support Vector Machine and K-Nearest Neighbour perform better than the random forest in this particular scenario. Using confusion matrix for obtaining the results three things are obtained that are precision, recall and accuracy. The result explains feature-based analysis on fine food reviews, Amazon at customer churn Support Vector Machine performed better as in overall comparison.

The Customer Requirements Analysis Method of Engineering Products Based on Multiple Preference Information

To effectively evaluate the fuzziness of the market environment in product planning,a customer requirements analysis method based on multiple preference information is proposed.Firstly,decision-makers use a preferred information form to evaluate the importance of each customer requirement.Secondly,a transfer function is employed to unify various forms of preference information into a fuzzy complementary judgment matrix.The ranking vector is then calculated using row and normalization methods,and the initial importance of customer requirements is obtained by aggregating the weights of decision members.Finally,the correction coefficients of initial importance and each demand are synthesized,and the importance of customer requirements is determined through normalization.The development example of the PE jaw crusher demonstrates the effectiveness and feasibility of the proposed method.

CASE-BASED PRODUCT CONFIGURATION AND REUSE IN MASS CUSTOMIZATION

The increasing complexity and size of configuration knowledge bases requres the provisionof advanced methods supporting the development of the actual configuration process and design reuse.A new framework to find a feasible and practical product configuration method is presented in masscustomization. The basic idea of the appoach is to integrate case-based reasoning (CBR) with a con-straint satisfaction problem(CSP). The similarity measure between a crisp and range is also given,which is common in case retrieves. Based on the configuration model, a product platform and customerneeds, case adaptation is carried out with the repair-based algorithm. Lastly, the methodology in theelevator configuration design domain is tested.

TECHNOLOGY AND APPLICATION OF PRODUCT EVOLUTIONARY DESIGN BASED ON CONFIGURATION IN MASS CUSTOMIZATION MODE

Product customization has been recognized as an effective means to implement mass cus-tomization （MC）. A new theory and method for MC-oriented evolutionary design of configuration product is presented based on the study of developing law of evolutionary design in integrated envi-ronment, which focuses on the innovation and reuse properties of configuration product. The key technologies for general requirement modeling in quick response to customer requirement, multi-level stepwise configuration optimization driven by customer requirement and evolutionary deduction of product variable structure based on configuration association are thoroughly investigated. The suc-cessful application of the presented method in the development of real-life products demonstrates its utility, flexibility and robusticity.

Customization Product Design Based on User's Emotion and Needs

The paper presents a design method that ensures the ingenuity of the product form as well as the whole and exact expression of user’s needs. The key idea is to establish an automatic design system which can transform the user’s language needs into the product features in real-time. A rifle was taken as a research instance and soldiers were chosen as evaluation customers. The theory of fuzzy set and semantic difference are adopted to evaluate the relationship between user’s needs and product features as well as their alternatives. FAHP (fuzzy analytic hierarchy process) is utilized to judge the user’s satisfactory forms. This method can also be applied to other product form designs.

Social Manufacturing for High-end Apparel Customization

Social manufacturing(SM), a novel distributed,collaborative and intelligent manufacturing mode, is proposed and developed for high-end apparel customization. The main components of SM cloud are designed, and its research topics are summarized. Then, SM's key technologies are studied. 3D technologies for apparel customization, like 3D modeling, 3D fitting mirror and 3D customization, are developed to improve the customization precision and user experience. Information based collaborative management is realized to share, communicate,and handle the information efficiently among all groups and individuals of SM cloud. Suppliers' evaluation mechanism is designed to support the optimal decisions making. Next, SM cloud is constructed in five layers for high-end apparel customization.By using SM cloud based crowd-sourcing, social resources can be allocated rationally and utilized efficiently, consumer can customize the product in any processes like innovation, design,making, marketing and service, and traditional apparel enterprise can be upgraded into SM mode for keeping it competitive in the future customization markets.

Research of the Optimization Methods for Mass Customization (MC)

A group of graphical models and mathematical models a re used to describe the methods of mass customization (MC). The relationships am ong the models and methods are shown in Fig.1. Fig.1 Relationships among optimization methods for MCThe methods for MC relate to both of product and process, also customized quanti ty and deepness. The methods for MC are integrated by the work in the paper, whi ch can help to understand and use MC better. The optimization and standardization of product is the key for MC. Increasing op timization breadth in product family can help to decrease the customization quan tity in every section of production process. Increasing optimization deepness in products family can help to move the CODCP backward in production process. At the same time, the optimization and standardization of product is the key to reduce cost of customized product. The optimization of the integration of pr oduct and process is the key to reduce lead time of customized product.

Grey Incidence Analysis Applied to Civil Aircraft Customization Process

The airlines need to select the optional equipment according to their individual development demands and the manufacture′s standard specification manual when purchasing a new airplane.For this customization process,the selection theory is mainly based on qualitative analysis and quantitative analysis.The grey incidence analysis(GIA)is used for modeling,which evaluates the correlations between optional equipment and airlines′individual demands.Meanwhile,the customization demands are quantitatively processed as different weights in evaluation index system with analytical hierarchy process.Then,the value of grey incidence degree is obtained which shows whether the optional equipment is on the purchasing list or not.Finally,two airlines′customization demands are applied in the example of aircraft cabin′s seats,so two different purchasing priorities and equipment installation lists can be obtained.The results and comparisons verify the reasonable of modeling,which provides an objective scheme of aircraft equipment selection.

Intraoperative Tracheostomy Tube Customization

Objectives: This article describes how to make a customized tracheostomy tube immediately in the operating room setting. This is particularly critical when a commercial customized tracheostomy tube cannot be readily obtained. Study Design: Case presentation. Methods/Results: A 73-year-old female was seen in our clinic for management of a recurrent invasive paraganglioma of the thyroid. She underwent a total laryngopharyngectomy, cervical esophagectomy, and anterolateral thigh free flap reconstruction followed by post-operative radiation. In follow-up, the patient presented with dyspnea related to two areas of stenosis, one at the level of her stoma and one at the distal trachea. The patient was therefore taken to the operating room urgently for dilation and placement of a tracheostomy tube. Available tracheostomy tubes were tried and ill fitting as each tube narrowed the patient’s stoma or abutted her distal granulation tissue. To custom create a tracheostomy tube, we used a standard rib shearer to shorten a #6 uncuffed tracheostomy tube by 2 cm. The edges were further smoothed and beveled using sand paper and a diamond burr drill. The finished product was a wide diameter tube with a custom length suited to our patient. Conclusions: Although a simple solution, the use of a rib shearer provides a quick and feasible solution to creating custom length tracheostomy tubes in situations where custom length tubes are needed yet unavailable.

Intelligent customization of digital carpet based on C2B

New requirements have been put forward by the age of "Internet+" to improve the abilities of reform,transformation and innovation for traditional carpet industry in combining the technology of the fully digital fabric tufting and the system of networked intelligent customization that forms C2B mode of personalized customization of the digital carpet to promote the carpet industry to develop towards individuation,intelligence and high efficiency. Exploring the market background of C2B mode of intelligent customization of the digital carpet and developing the technology of the fully digital fabric tufting makes it possible to achieve personalized customization of the digital carpet. The industrial internet which is integrated by a lot of robots of the fully digital fabric tufting will change completely traditional carpet industry.